Getting errors about system files when running Disc Utility

I recently got a MacBook Pro and I'm trying to take good care of it too. I ran a Repair Disc Permissions on the Disc Utility and I got an error for two system files saying that they were modified and that it wont repair them. Can somebody help me fix this problem? Will I have to reinstall the OS?

My errors were as follows:
SUID file: "System/Library/CoreServices/RemoteManagement?ARDAgent.app/Contents/MacOS/ARDAg ent"
SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum"
So after looking at that list, I think I'm ok...

Similar Messages

My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
Why do I receive this error?

Hi,
TThe error -10609 can result from several situations in which the device's resources are already in use.
A Measurement & Automation (MAX) test panel is already open.
If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
An AI Clear function was not used at the end of the previous acquisition.
If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
Multiple programs are accessing the device.
If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
I hope this helps...and have a Great Day!
George

Getting error "Access via null" when running the web dynpro application

Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
    gi_manufacturer = ls_manufacturer
IMPORTING
    lv_message      = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
Vinod

Hi,
if   wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.

PLEASE: IS THIS A VALID ERROR WHEN RUNNING DISC ULTIL FROM INSTALL DISK 1

when running disc util from install disc 1..i'm getting "invaild leaf record count it should be 7 instead of 96" my install reads os vers 10.2.1.. my current os is 10.4.9

I would try running the Disk repair several more times. But more then likely you'll need a more robust utility.
DiskWarrior is the best there is at this.
If you have a backup, preferably a bootable backup from before this problem, you can Erase and Install to give you a new directory. If you don't have a backup, this procedure will erase everything on your drive.
Cheers!
DALE

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?

Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

TS1424 When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is home PC and I am administrator. Any help is appreciated.

When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is a home PC and I am the administrator. Any help would be appreciated.

Hi PSpark!
I have an article here that I believe will help you troubleshoot this issue a little further. That article can be found right here:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

Is your AirPort Express an older 802.11g model? If so, you will need to install v5.6 if you are running OS X Lion or 5.6.1 if running OS X Leopard or Snow Leopard. Unfortunately, the iOS version of the AirPort Utility cannot administer these older base stations.

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Error -17300 is generated when running selected step

Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏174 KB
Debug_Example1.seq ‏19 KB
ErrorScr.bmp ‏915 KB

Hi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏233 KB

I am unable to sync my ipad..i get error message " required file cannot be found" can someone help?

I am unable to sync my ipad..i get error message " required file cannot be found" Can you help me?

Some things to try in this order:
1) Make sure you designated the correct folders for music, etc.
2) Press and Hold the Home and Power buttons on the iPad until the Apple Logo appears, about 10 seconds.
3) Make sure all antivirus and firewalls are off.
4) Delete and reinstall itunes. (Back up the itunes folder first.)
Hope this helps...

In your experience what are the most common errors in binding files when deploying?

As the title suggest I'm interested in discussing the most common errors in binding files when deploying.
Reason for this is that I'm currently working on a Powershell script that can parse a binding file and create a reader friendly report (rtf format) with various information.
But the main purpose for this script is to find common errors in the binding file used. And so far these are the ones I've thought of:
- Tracking enabled for either services or the pipelines they are using (if it's a binding meant for Prod).
- Orchestrations logical ports not having any ports bound to them.
- URI containing certain words that's not ok. For example if a binding meant for Prod contains the word "test" anywhere in the URI then that should be reported in the created rtf report. This also applies vice versa.
So now I need your help with coming up with more ideas on common errors that need to be looked after and reported on if found!
Additional features the report should contain:
- Listing the details of each orchestration, send port, receive port along with their associated receive location(s). To better understand and get a quick overview on exactly what settings are planned to be deployed. Especially the "TransportTypeData"
section which otherwise can be quite tedious to read.
- List each unique host instance, so that I can easier see directly which ones might need a restart after an import.
I'd appreciate if you can come up with any more features that should be included in this script.
/Christian @ IntegrationAdmin.com

Filter on send port not on the same line as the Filter tag.
This one is a nice one, I ran into it several times. Mostly after copy/paste of a port definition for a binding file, because Visual Studio is formatting after paste the XML in a way the filter will get invalid. This leads to a cryptic error
during importing the binding.
http://winterdom.com/2008/06/biztalkfiltersnotgettingimported
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.

I get error code 150:30 when downloading

I get error code 150:30 when downloading

That's an activcation error and has nothing to do with "downloading" but rather "installing". As kglad said, without info on what you are referring to as well as system information this is not going anywhere...
Mylenium

How do I get rid of "unreadable files" when I am importing from my camera?

How do I get rid of "unreadable files" when I am importing from my camera?

Are all images unreadable? What is the exact error message you are getting?
If only a few images are unreadable, try to import not all photos at once, but in smaller batches, until you know, which photo it is that cannot be read. Import all photos that can be read and reformat your card in the camera to remove the unreadable files.
But if all photos are unreadable, try, if Image Capture can read your card.
Is it a new camera? Have you been able to import from that camera before?

Getting errors about system files when running Disc Utility

Similar Messages

Maybe you are looking for