Getting Errors setting up BC Email
Hi,
I'm receiving an error message when trying to set up an email address with Business Catalyst.
The primary domain for this website is www.weddingphotography-temecula.com and I also have anthonydavid.photography setup to be the "Default Domain" for Email as this .photography domain is being redirected to the primary website domain. I'm not sure why i'm getting this message?
Any help would be greatly appreciated. I'm sure it has something to do with the MX records but for some reason i'm totally lost.
Thanks,
Mike
With a Creative Cloud membership, you can host up to 5 sites through Business Catalyst, but they are offered at a WebBasics plan level. This plan does not include hosted email accounts. To be able to utilize this feature, you'll need to purchase at least a WebBasics+ membership to Business Catalyst.
You can review the different plan options for Business Catalyst here: http://www.adobe.com/products/business-catalyst/buying-guide-subscriptions.html
Here's a short explanation of how you can set up a domain name email with Business Catalyst: http://kb.worldsecuresystems.com/kb/setup-pop-imap-email-accounts.html
Similar Messages
-
Getting errors when sending/receiving email
Hi there I have only just updated to Windows 10 from 8.1 nd am able to receive mails On outlook 2013 but continually get the following error message
Task '[email protected] - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' I have tried everything but cant get it fixed can someone help Thanks BryanSame thing here Fresh install of windows 10 and Outlook 2013 Receiving emails but getting the same error message when sending and emails stuck in Outbox. Tried all available options in account settings but it doesnt make any difference. Strangley enough though when initially setting up the mail account it sends its test email no problems. Installed Outlook 2010 to see if there was any difference but the same thing happens.
-
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this. The email address is connected to my Ipad and Iphone for the email app, can that have anything to do with it?
If it makes any difference, I updated both my Ipad3 and Iphone4 to ios 7 today. I'm trying to change from my Macbook air though.
Please advise, would really appreciate a reply ASAP.caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/ -
Getting errors when sending an Email with DI
Hi there,
I'm trying to send an email using DI and getting this error if I use smtp_to:
'Cannot find the full path for file <C:/Program Files/Business Objects/BusinessObjects Data Services/bin/smtp>, due to error'
and if I use mail_to:
'There was no default login, and the user failed to log in successfully when the login dialog box was displayed. No message was'
Can someone help and tell me what am i doing wrong, or am I missing configurations.
Your help is very much appreciated.
Gsecure
Edited by: gsecure on Mar 18, 2010 10:53 AM
Edited by: gsecure on Mar 18, 2010 10:53 AMHi everyone,
I installed DI 3.2 which solved the problem, I think my 3.1 was not installed correctly.
thank you.
Edited by: gsecure on Apr 16, 2010 8:54 AM -
Why do I get error messages when I email my scans through windows mail?
Every time I scan a document and try to email it, I first get a message which tells me it is sending 3 messages instead of one. Then after the sending process I get: Subject 'You have been sent 150 photo(s)', Account: 'incoming.verizon.net', Server: 'outgoing.verizon.net', Protocol: SMTP, Server Response: '552 5.3.4 a message size of 20482 kilobytes exceeds the size limit of 20480 kilobytes computed for this transaction', Port: 25, Secure(SSL): No, Server Error: 552, Error Number: 0x800CCC6D
Subject 'You have been sent 176 photo(s)', Account: 'incoming.verizon.net', Server: 'outgoing.verizon.net', Protocol: SMTP, Server Response: '552 5.3.4 a message size of 20482 kilobytes exceeds the size limit of 20480 kilobytes computed for this transaction', Port: 25, Secure(SSL): No, Server Error: 552, Error Number: 0x800CCC6D
How do I correct this?how can email site be reconfigured?
-
Error setting property 'html1' in bean of type null
Dear All;
I am currently on site, and away from my team, so they send over additional screens, that i treid to add to the project i have with me, i added the model, i add the SRC folder, and the .JSPX pages, only when i run the pages, i get Error setting property 'html1' in bean of type null, i checked previous threads, and i know the error and accordingly i checked that the page def exists, which it does, and that all the managed beans are there, and linked to faces config, which they are, so i am just wondering if any1 has any idea, as to how to make the pages work...
regards
Halimhi frank,
I cross checked, all the entries in the bean, with those in the JSPX source code, and chceked in the auto comment of the JSPX page the name of the bean, i have checked the faces config, i am going to remove the the new models and re-add them, just tell me if i need to add any files other than those:
MODEL X folder, which contains the model
JSPX folder, which contans the pages
SRC folder in view controller
And the faces config to web-inf
thanks in advance man
regards
Halim -
Finish a project but when I try to transcode some avi files I get "Error setting up transcoder"
If I try to create a DVD Image I get the same message.
Anybody had this problem??
Info:
WinXP Pro SP2
Avi's encoded with power director 4.0 using compressor xvid mpeg-4 codec
Thanks> I encoded the avi to DV-AVI using power director, but the files resulted in 8GB each! that's a lot of space. Anyway id did worked on encore and made a 4.7GB, but it took too much time. Is there a DV-Codec that will encode a xvid to DV-AVI with less space requirement???
The way Encore does this is to tell you in the project window what the transcoded bitrate will be with the current settings.
You can prove this to yourself by making sure the correct column is being displayed in the project window - right click on the part where the columns are named, and you should see a pop up with the option "columns". Make sure that the "bitrate" column is being displayed.
Then, go to the project transcode settings (right-click on the asset in the project window in the "Transcode Settings" column) and pick a low value. You will see the value in "bitrate" column change.
@Joe - I thought Encore did indeed display the bitrate that the current transcode settings will give - it's in the project window, under "bitrate" described above -
New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer running windows 8.1 Please help, Mainly use to share pictures. Thanks!
One thing puzzles me:
RedClayFarmer wrote:
I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
I don't understand why running the exe from the installation folder would have worked.
I would have simply tried to run that exe from its real location :
Sorry, I can't help you more about permissions... -
Error message tells me to reset password. After resetting password I get confirmation email that new password is set. As soon as I try to access App Store I get error message that password is not valid.
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
-
Trying to set up email and getting error Cannot get MailUsername or password incorrect. I think everything's correct. Anyone got any other settings I should check?
Managed to sort it thanks. I had 2 issues. - q
1 was just case sensitive password
2 had to set server type to POP
Now working fine, thanks -
I just got my Iphone 5 and I'm trying to set up my email. I keep getting the error message "Yahoo! server unavailable". Help! Thank you.
There are different ways, but delete that email account and this time when you go to set up your email, dont start in the yahoo setup tab, do it in the " Other " tab and set it up that way.
-
I have HP Photosmart 5510 printer. I have never been able to set up eprint features. When I try to sign in, I get a message saying that email address is already in use.
Hi there Tomsks;
OK have you tried loging with the credentials you created in Snapfish.com on the hpeprintcenter.com.
Let me know if after that you still facing this issue I help in any way I can.
Hope this helps!
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
I have tried for over 2 hours to get email on my phone. Shut off and on and tried to pick new password. Keep getting error message. Very frustrated
Since the title of your post says " ... invalid use rid or password ...", I suspect the issue is some illegal mix of blanks and/or special characters (e.g., punctuation) in either your user ID, password, or both.
Be very careful you are following the rules for what constitutes a legal user name and a legal password. -
Since approx 7am GMT I've been getting "Error in sieve filter" message with each incoming mail, worse though, since about 12 noon I cannot recieve or send mail to or from my iCloud account apart from I've been getting emails from Apple (ie I've just received a welcome one from Apple Support Communities...)!! I've had this account for years, never had a problem - it can't be the OSX Mail server because the problem is the same when I log directly into iCloud. I've tried sending emails from my Hotmail account to my iCloud account (a .mac) and just get undeliverable messages back. I'm really in the s**t now at work. : ( I just set up a Smart TV yesterday with a wireless dongle - that's the only thing I've done out of the ordinary. I've spoken to Sky who are my ISP and they say all's fine with them (although the router kept kicking my off the internet this morning which was strange...). Router seems fine now though. I'm really hoping someone here can help!!
Many thanks!!Do you think once Apple sort this out I'll get my missing emails back?
-
I have I-phone 5 with 15 GB. I currently have used 12.8 GB. I get error message that storage is almost full, I go to setting and my mail is using 5.7 GB. Can that be how alot of my storage is being used? If so or not any advise?
caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/
Maybe you are looking for
-
Create a new web application, how shall I update the file server.xml
Hi, I will create a new web application, i.e named newApp. Then I create a file structure as follows: - <server-root>/newApp - <server-root>/newApp/WEB-INF - <server-root>/newApp/WEB-INF/classes Then I must tell the server that I have created a new w
-
Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!
-
Do you have any idea about EPC error? If yes, Please come in.
Hellow : please try to solve the EPC-INIT failed epc-95 error which arbitrarily raises any day, we can not say that it raises only during peak time.It comes arbitrarily any time any day. Initially it was use to come after every 5 to 10 days But now i
-
I have an problem with multiple access points losing the ability to telnet to them.They access points work fine but the only way I can get the ability to telnet back is to restart them. Has anyone else had this problem.
-
TS4062 IOS 7 itunes wifi sync broken
I for the life of me cannot get iTunes wifi sync to work with any of the five devices I have. What is odd is that itunes just closes out the connection: tshark -i en0 -c 500 -n -f "host 172.16.0.172" Capturing on 'Ethernet' 0.000000 172.16.0.172 -