Getting errors trying to burn a CD Error 4280

Hi,
I hope someone can help me.
I have never had issues before but in the last few days it has been HORRIBLE.
I have brand new CDs to burn to and sometimes I get an error to insert a blank disc(how can it not be it is brand new)
Other times I try to burn a disc and get:
"the attempt to burn a disc failed an unknown error occured(4280)
I have deauthorized and reauthorized my PC. Some of the songs I am burning are ones I loaded from a CD that I had burned one before with NO problems.
I have wasted at least 10 CDs in the last few days trying to get this to work.
I have checked EVERYWHERE for a list of Error Code numbers but I can find it anywhere.
It will check playlist then start to "write" a song and it stops.
ANY help would be appreciated I am seriously losing my mind!!
I made sure I had the latest version of ITunes and upgraded last night.
I was able to burn one this AM and then the next one the errors happened again.
Emily

I have seen a lot of fixes that ask if my drive is
Sony CD-RW/DVD CRX830E model drive
It is not when I did the diagnostic to figure out my drive I get this(and I have tried burning as low as 4X
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive F: PHILIPS CDD4851 CD-R/RW on CDR media at speed 8X.
Is there ANYONE that can help or at least point me in the correct direction
Thank you

Similar Messages

How do I fix the 4900 error I get when trying to burn a cd in itunes?

how do I fix the 4900 error I get when trying to burn a cd in itunes?

We are having the same issue.
Windows 7 x64
Microsoft Office 2013 (Word)
Adobe Reader XI (11.0.0)
Whenever someone tries to embed a PDF file into a Word document, the following error occurs:
The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed.
I have looked at alot of articles online that say to 'Disable' Protected Mode. This does not resolve the issue. This option is not set by default in our environment.
Do we have any confirmation or information from Adobe on this issue?

TS1436 keep getting error 4280 when trying to burn cd

keep getting error 4280 when trying to burn cd

Can't burn a CD in iTunes for Windows
If you still can't burn CDs on iTunes, use Windows Media Player to burn CDs.
Burn a CD or DVD in Windows Media Player - Windows - Microsoft
Hope this helps.
Message was edited by: keeferaf

I can't burn a disc from Itunes without getting error 4280 repeatedly.

I can't burn a disc from Itunes without getting error 4280 repeatedly. I was just able to burn a CD and now can't burn another. Any thoughts? I know my CD burner works as I just made a disc. I have tried changing file type from Audio to MP3 with no luck. Thanks for trying to help me.

Hello Sonni,
It sounds like you are unable to burn a disc with iTunes due to this error code. I would first use the following article to check issues with the type of disc drive:
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
If this is not the case, use the following article to help troubleshoot the issue:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cant burn a cd getting error 4280

Keep getting error 4280 when trying to burn a music cd. Wht is the fix - suggestions?

Hi,
I have the same issue!
Here you can find my diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
TOSHIBA R100__
iTunes 7.0.2.16
Driver CD 2.0.6.1
DLL Driver CD 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Driver video: Trident Video Accelerator Cyber-XP4 v6.4823-061.22_2\Trident Video Accelerator
IDE\DiskTOSHIBAMK4006GAH_______________________BY201A_, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomGENERICDVD-RAM_MLT05__1.03, Bus Type USB
Verifica sul sito dedicato agli aggiornamenti di Windows di possedere gli ultimi pack e patch di servizio per il tuo OS. I pack di servizio influiscono sulle prestazioni delle unità di CD / DVD USB e firewire.
L'utente attuale è amministratore.
E: GENERIC DVD-RAM MLT05, Rev 1.03
Il disco nell'unità è vuoto.
L'operazione per ottenere la velocità dell'unità è stata eseguita con successo.
Le velocità CDR dell'unità sono: 4.
Le velocità CDRW dell'unità sono: 4.
Le velocità DVDR dell'unità sono: 4.
Le velocità DVDRW dell'unità sono: 4.
Si è verificato un errore con codice 2131(0x00000853) sulla masterizzazione CD Audio. Si è verificato sull'unità E: GENERIC DVD-RAM MLT05 sul media CDR alla velocità 0X.
Help, Please!

Cant burn getting Error 4280 (Yes I have latest version)

I was having this issue before I upgraded to the newest version and still seem to not be able to burn.
I am getting Error 4280?
There isnt much info on this to fix it it seems...
I'm running Win7 64
Never had a problem before.
Ideas to fix this?

anyone at all... this is very frustrating to have a top of the line computer & have it not burn cds in 2010 because of a software issue...

I'm getting Error 4280 when trying to burn a CD

Hi,
I hope someone can help me.
I have never had issues before but in the last few days it has been HORRIBLE.
I have brand new CDs to burn to and sometimes I get an error to insert a blank disc(how can it not be it is brand new)
Other times I try to burn a disc and get:
"the attempt to burn a disc failed and unknown error occured(4280)
I have deauthorized and reauthorized my PC. Some of the songs I am burning are ones I loaded from a CD that I had burned one before with NO problems.
I have wasted at least 10 CDs in the last few days trying to get this to work.
I have checked EVERYWHERE for a list of Error Code numbers but I can find it anywhere.
It will check playlist then start to "write" a song and it stops.
ANY help would be appreciated I am seriously losing my mind!!
Emily

Bump for some help.
I was able to burn 1 this am but the next one I got the same errors as I mentioned above

Error 4280 for Matshita UJ-831Da - Burn worked w/ old ver. iTunes, NOT NOW

Using Sony laptop, CD/DVD drv = Matshita UJ-831Da.
1. Burn quit working when iTunes upgraded to 7.2.
2. I now get Error 4280.
3. The only change was an upgrade to iTunes.
4. No other software, or OS, changed on the system.
5. Burn always worked with old ver. of iTunes.
6. Burn still works with Win Media Player.
7. Burn still works with all other software.
QUESTION # 1
Does anyone know if there is a fix from Apple for this cd/DVD drive for the latest upgrades of iTunes?
QUESTION # 2
Does anyone know why Apple refuses to address the widespread problem and offer an easy-to-find list of fixes for their own Error 4280?
Thanks,

I'm having the same 4280 issue when trying to burn. What can I do? Here are my CD diagnostics...
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Latitude D600
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: Cdr4_xp (5.2.0.91),
UpperFilters: pwd_2k (5.2.0.91), cdralw2k (5.2.0.91), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
Mobility Radeon 7500
Radeon Mobility
MOBILITY RADEON 9000
Intel(R) 82845G/GL Graphics Controller
Intel(R) 82865G Graphics Controller
Intel(R) 82852/82855 GM/GME Graphics Controller
Intel(R) 82810E Graphics Controller (Microsoft Corporation)
Connected Device Information:
Disk drive, FUJITSU MHT2040AH, Bus Type ATA, Bus Address [0,0]
Disk drive, WD 1200BEVExternal USB Device, Bus Type USB
CD-ROM Drive, SAMSUNG CDRW/DVD SN-324S, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: SAMSUNG CDRW/DVD SN-324S, Rev U303
Audio CD in drive.
Found 13 songs on CD, playing time 58:50 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:47:08
Track 3, start time 08:49:28
Track 4, start time 13:12:55
Track 5, start time 21:13:38
Track 6, start time 24:56:53
Track 7, start time 29:07:35
Track 8, start time 33:34:20
Track 9, start time 37:17:35
Track 10, start time 41:30:33
Track 11, start time 45:32:10
Track 12, start time 51:32:05
Track 13, start time 53:25:38
Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 16 20 24.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: SAMSUNG CDRW/DVD SN-324S on CDR media at speed 20X.

Error 4280 for Matshita UJ-831Da - Burn no longer works w/ iTunes.

23 Dec 07
MY SYSTEM:
Sony laptop
CD/DVD drv = Matshita UJ-831Da
iTunes ver. 7.5.0.20
PROBLEM:
1. Burn quit working when iTunes upgraded to 7.2.
2. I now get Error 4280.
3. The only change was an upgrade to iTunes.
4. No other software, or OS, changed on the system.
5. Burn always worked with old ver. of iTunes.
6. Burn still works with Win Media Player.
7. Burn still works with all other software.
8. iTunes will not upgrade itself now, nor allow "down"grade.
9. Slowing burn speed does not eliminate error 4280.
10. "Run Diagnostics" causes whole system to freeze and crash.
11. Creating new account on system does not eliminate error 4280
12. Creating new account on system does not eliminate freeze / crash.
13. I have credit with iTunes store that cannot be used until fixed.
QUESTION:
This is an Apple iTunes ONLY software problem. What is the fix?
Thanks,

For my Matshita UJ-831Da CD/DVD drive, the driver version showing in device manager is 5.1.2535.0. I just now clicked on "update driver" and the reply was that a newer version could not be found.
But why would doing a "Run Diagnostics" in iTunes now freeze / crash my whole system when it never did before? It only began doing that after it also began failing to burn CDs. Again, the iTunes software is the only software that has ceased to burn CDs.
Several months ago, I finally reached by phone a girl at Apple tech support who first denied there were any known problems. But when I told her that the web was full of thousands of people screaming about this very issue she recanted and admitted that iTunes was having these problems, that they had posted the fix for some of the other CD/DVD drives but not mine. She then said, "but if you pay $35 I'll tell you how to fix it." Absolutely unethical. That's like buying a car then being told that there's now an extra fee for being told how to start it. She may have lied about knowing what the fix is, but either way it's absolutely unethical.
The problem is iTunes. iTunes changed and now won't drive the same current drive it worked with when iTunes accepted my money, in advance, to purchase and burn music at future dates. iTunes should fix the problem.
I'm willing to go through the leg-work, to try all of Apple's instructions here, but Apple also needs to follow through with this.
Thanks again for your help.

Equium A60 -199: ITunes and Mat****a UJ-830s (error 4280)

I am unable to burn CD on my notebook. This previously has never been a problem, however recently no matter what type of burn software I use I cannot burn to cd. I am currently using ITunes version 6 and after the cd burning process starts my computer ejects the cd and I get error 4280.
I have read a few different posts on this on other forums which suggest using different CD to re-installing an older version of Itunes ( I am currently using v6), however the most interesting one seemed to come from Hewlett Packard's support site. They suggest opening the cd configuration folder and editing the file gcdrtype.cfg. This was applicable for a certain type of compaq presario desktop pc and goes on to advise to edit a line in the narrative, save and reboot and voila. The problem should be solved. Since I own a Toshiba eqium a60 -199 I wonder if anyone knows of a similar fix/solution to the problem.
I am also intrigued by the following message that Itunes CD diagnostics produces when i run it:
IDE\DiskFUJITSU_MHT2040AT_______________________00 22____, Bus Type ATA, Bus Address [0,0]
IDE\CdRomMAT****A_DVD-RAM_UJ-830S________________1.50____, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Is this the root of my problem? How do I get this update?
If anyone can guide me in the right direction to solving my problem and getting me back to cd burning heaven, I would be most grateful.
`

Hello
It is always very problematic if you use some, ion my opinion, "exotic" software. I have noticed that most users on this forum use "standard" applications like NERO burning ROM.
If nobody can give you an answer try to contact ITunes support and explain them the situation. They have enough experience with own product. Check also if there is any FAQ page. Sorry but I can not tell you anything that can help.
ITunes support

Hi i am trying to burn an mp3 cd but i keep getting the error code 1771 and the disc ejects from the drive??

i have tried different things but as yet i havent found a complete solution.i have ran diagnostics, the optic drive seems fine.i can burn some cd's but not others.i would just like to know what is the EXACT criteria for a successful burn..is it to do with characters ?,!/ etc or is it to do with folder location.any advice or help/direction would be greatly appreciated...
diag results
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion m6 Notebook PC
iTunes 11.1.5.5
QuickTime 7.7.5
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00E3B6480C87B1C0
Current user is not an administrator.
The current local date and time is 2014-05-02 15:34:34.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., Radeon (TM) HD 7670M
Intel Corporation, Intel(R) HD Graphics 3000
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: iaStorF (11.6.0.6),
UpperFilters: GEARAspiWDM (2.2.3.0),
E: hp DVD RAM UJ8B2, Rev 1.00
Audio CD in drive.
Found 20 songs on CD, playing time 78:23 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:07:62
Track 3, start time 06:44:52
Track 4, start time 10:03:30
Track 5, start time 14:00:35
Track 6, start time 17:37:62
Track 7, start time 21:05:02
Track 8, start time 24:39:37
Track 9, start time 28:49:40
Track 10, start time 33:08:27
Track 11, start time 37:07:25
Track 12, start time 40:19:10
Track 13, start time 44:12:35
Track 14, start time 48:58:20
Track 15, start time 52:20:65
Track 16, start time 57:59:22
Track 17, start time 61:53:45
Track 18, start time 66:20:10
Track 19, start time 70:03:32
Track 20, start time 74:28:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   8 24.
The drive CDRW speeds are:   8.
The drive DVDR speeds are:   8.
The drive DVDRW speeds are:   8.
The last failed MP3 CD burn had error code 1771(0x000006eb). It happened on drive E: hp DVD RAM UJ8B2 on CDR media at speed 0X.

Hello kilgs85,
The article linked below provides some useful steps that can help get iTunes back to burning discs.
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Cheers,
Allen

I keep getting an Error 4260 when trying to burn a CD-R from Itunes... PLEASE HELP!

I have been trying to burn a CD-R at a slower speed but everytime I do so it comes up with Error 4260 and spits it out. I have tried a system reload and still can't get it fixed. I am trying to burn it at a slower speed b/c the CD will not play in my car at the higher speed. Please help!

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

I keep getting error code 4450 when I'm trying to burn a CD from itunes. It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

I am getting an error message when trying to burn pictures to a dvd rw, and it says the disc can't communicate with the drive?

I am trying to burn some wedding pictures to a blank dvd rw. I keep getting an error message that says the drive and the disc can't communicate. I have run a repair disc and repair disc permissions, restarted my laptop, and still get the error. What else can I do?

Hi sheryl525,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801#
Cheers,
- Judy

Using Windows 7, I get an error message 4310 when trying to burn a CD from a playlist. I ran diagnostics and everything was ok. Please help. Reading previous posts haven't helped.

I have read all of the other postings and they haven't helped.
When I ran diagnostics here is what I got:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron 5720
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0015B7001238F790
Current user is not an administrator.
The current local date and time is 2013-08-11 10:02:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2a1c5ee63a68f4be6bc96c5266eed869
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: iaStorF (11.5.0.183),
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   PLDS DVD+/-RW DS, Rev
Audio CD in drive.
Found 11 songs on CD, playing time 42:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:52:30
Track 3, start time 06:59:54
Track 4, start time 11:40:47
Track 5, start time 15:15:38
Track 6, start time 19:31:39
Track 7, start time 22:52:55
Track 8, start time 26:38:36
Track 9, start time 30:28:61
Track 10, start time 33:35:27
Track 11, start time 38:20:39
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   8 16 24 32 40.
The drive CDRW speeds are:   8.
The drive DVDR speeds are:   8.
The drive DVDRW speeds are:   8.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DS on CDR media at speed 24X.

Hello Princess Lynne Anne,
Thank you for using Apple Support Communities
First I recommend taking a look at this article named iTunes: Music purchased from iTunes Store cannot be burned to MP3 format CD found http://support.apple.com/kb/TS1476.
Songs purchased from the iTunes Store may either be in AAC format or AAC Protected format depending on when they were purchased (older songs used AAC Protected format). You can convert AAC songs to MP3 format allowing them to be burned to an MP3 format CD, however AAC Protected songs can not be converted. You can, however, back them up to a data CD or DVD, or you can burn them to an audio CD (which can be played in a CD player).
And if your issue still persists after converting any of these purchases, then I would recommend this part of the article named Disc Burning Quick Assist found here http://support.apple.com/kb/HT1152#learn2:
Top troubleshooting tips
In addition to the following tips, check out these articles:
Solving problems with burning discs
If the disc burning options are dimmed or unavailable
If a burn does not succeed, check the disc or try another disc
Eject the disc from the drive and inspect it to see if the surface is dirty or scratched, or if it already has data written on it (the shiny surface is slightly darker where data has already been burned). If it's dirty, wipe it clean with a soft, damp cloth and try burning again. If the disc already contains data, try another disc. If you're using a rewritable disc that already contains data, be sure to erase it before burning data on it again. Small flaws or surface inconsistencies can cause an unsuccessful burn. Try burning your content to another disc or try a different brand of disc (if possible).
Make sure that your optical drive can record discs
If your drive is built into your Mac, make sure that you have at least a Combo Drive if you want to burn a CD or a SuperDrive if you're trying to burn a DVD (or CD). Consult your Mac manual or your third-party manufacturer's disc drive manual for more information.
Check the disc type
Make sure that your disc drive is capable of writing to your media at hand. For example, you won't be able to burn a DVD+RW disc with an older Apple SuperDrive. Consult your Apple or third-party product manual for your drive's supported media specifications. You should also use discs that are rated for the burn speed of your drive.
Slow things down
In the Burn dialog, specify a burn speed that is slower than the maximum speed rating for your disc drive (if you can) and try burning another disc.
Free up some memory
If you've got other applications open, quit the ones that you're not using (or quit them all except for the one from which you're burning your disc). Allow the disc to burn before doing other things on your computer.
Check your hard drive's available space
When you burn a disc, your Mac temporarily sets aside an amount of hard disk space equal to the amount of data being burned to the disc. If you're burning a large amount of data, you may run out of room on your hard disk if it's almost full, which may prevent a disc from burning. To free up space, throw out unwanted files or back up files to an external drive.
Restart your computer
Sometimes a simple restart can resolve issues. Once you've restarted your Mac, try burning another disc again.
Update your software
Use Software Update (from the Apple menu, choose Software Update) to check for, download, and install the latest versions of your Apple software. If you're using a third-party burner, visit the manufacturer's website for the latest software updates for your model.
Check your connections
If you're using an external disc writer, make sure that all of your cable connections are secure and that the optical drive is powered on.
Cheers,
Sterling

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(95452)

Getting errors trying to burn a CD Error 4280

Similar Messages

Maybe you are looking for