Getting errors while opening SAP MMC for NWCE

Hi Frndz ..
I installed NWCE 7.1 trail version it was installed well, but when am trying to start the server thru rightcklick start all services on SAPSID(CE1), itz giving follwoing errors..
Start failed :2
*NIEHOSTUNKNOWN*_
*NRawConnect failed in pluginfopen()*_
and also this one:
Cannot connect to SAP Service on sap
_WebService error:20_
Host not found
*TCP get host by name failed in tcpconnect()*_
DCOM interface error:800706BA
*The RPC server is unaavailable*.
i was structed with this error .plz do the needful
Thanks in Advance
Regards
Rajesh

Hi..
while installing its asked to change the hosts file with ip adress 127.0.01 as Host name perivious it was assigned with localhost after that i was changed it to my system name .
so the installation was sucessful..
Is i need to made any changes in Hosts r services file in
Drivers--->etc folder
Plz do the needful
Regards
Rajesh

Similar Messages

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

Getting error while opening Enterprise project type (EPT)

Hello All,
In Project Server 2013, I am getting error while opening any Enterprise project type (EPT) from EPT page or when I am trying ot create any new EPT. How can I troublshoot this, please help.
Thanks in advance

I searched ULS logs and got the below error details.
Exception occured in method 'Workflow.ReadWorkflows' System.Data.NoNullAllowedException: Column 'WORKFLOW_ASSOCIATION_NAME' does not allow nulls.     at System.Data.DataColumn.CheckNullable(DataRow row)     at System.Data.DataColumn.CheckColumnConstraint(DataRow
row, DataRowAction action)     at System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent)     at System.Data.DataTable.SetNewRecordWorker(DataRow row,
Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException)     at System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID,
Int32 pos, Boolean fireEvent)     at System.Data.DataTable....
Let me know your advise on this.

Getting error while opening Workbook

hi Gurus,
In the production system I am getting error while opening the workbook 'THE WORKBOOK DOESNOT EXISTS IN THE DOCUMENT STORES' through analyzer, transported successfully. Even single workbook not able open, even I am able to open the queries, what could be the reason, kindly suggest me ASAP.
with regards,
Ravi Kumar.

Ravi,
They might have got transported. But, they need to be manually put in the roles folder. Ask your manager to do that if you don't have anuthorization.
You need to goto RSSM.
Thanks

Getting error while opening Excel document from SharePoint site

Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/

Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting error while opening document in SharePoint 2010

Hi,
I got the below error while opening a document in SharePoint library.
"The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document."
Please help me to resolve.
Krishnasandeep

Hi,
According to your post, my understanding is that you got the error while opening a document in SharePoint library.
The issue can occur when you have several different versions of Office installed on the same computer and you have
several different versions of the OWSSUPP DLL available which are not registered correctly.
To resolve this issue you should disable Microsoft SharePoint Foundation Support in any other version of Office installed on the machine and then repair Office.
For more information: you can refer to:
You get an error message when you open an Office file from SharePoint on a computer on which you installed more than one version of Office
In addition, please ensure that you are using Internet Explorer (32 bit) not the Internet Explorer (64-bit).
Please Verify the “Sharepoint OpenDocuments Class” addon is installed and enabled. If it is not reinstall Office.
Please refer to:
Solved: The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document.
And, if the Office tools can’t install correctly will also cause the error.
Here is a thread about this issue, you can check it. The replies include most of the possible reasons and gave the solutions.
http://social.msdn.microsoft.com/Forums/en-US/06a4943a-5150-44c5-ae6b-3354c85396f5/the-document-could-not-be-opened-for-editing-a-microsoft-sharepoint-foundation-compatible
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting error while opening the workbook

Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajesh

This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ

Getting error while opening transactions in a perticular queue

Hi All,
we had been experiencing this error for some days now. When we try to open any transactions in this queue we end up getting the below error:
"Access denied.
You may not have access to perform this task on the chosen person
or your session has timed out. (Try to log into the system again.)
I have complte access to this - so that should be an issue. When i try to open a transaction it is long time to process and then i end up with this error.
I heard in other post to minimise the search attributes for this and i did the same but it worked for some time and then again i am getting the same error.
Please suggest how to get rid of this. This is right now happening only to one single queue.

Hi,
According to your post, my understanding is that you got the error while opening a document in SharePoint library.
The issue can occur when you have several different versions of Office installed on the same computer and you have
several different versions of the OWSSUPP DLL available which are not registered correctly.
To resolve this issue you should disable Microsoft SharePoint Foundation Support in any other version of Office installed on the machine and then repair Office.
For more information: you can refer to:
You get an error message when you open an Office file from SharePoint on a computer on which you installed more than one version of Office
In addition, please ensure that you are using Internet Explorer (32 bit) not the Internet Explorer (64-bit).
Please Verify the “Sharepoint OpenDocuments Class” addon is installed and enabled. If it is not reinstall Office.
Please refer to:
Solved: The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document.
And, if the Office tools can’t install correctly will also cause the error.
Here is a thread about this issue, you can check it. The replies include most of the possible reasons and gave the solutions.
http://social.msdn.microsoft.com/Forums/en-US/06a4943a-5150-44c5-ae6b-3354c85396f5/the-document-could-not-be-opened-for-editing-a-microsoft-sharepoint-foundation-compatible
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting error while opening our plugin in InDesign CC debugger

Hi,
I am getting below error while opening our plugin in Adobe InDesign CC Debugger. Kindly help me to fix this issue.
NodeID_rv::fNodeID should be nil, NodeID_rv should only be used as a return value, and it should always Relinquish() it's NodeIDClass*. Otherwise we'll leak
Thanks,
Vimala L

Hi Vimala L,
you probably use the type NodeID_rv as a type of a local variable. If so, replace it by the type NodeID.
Or you have derived your own class from class NodeID. In this case be careful and use NodeID and NodeID_rv in the same way as InDesign does.
Markus

Getting error- Cannot open as archive for CS6 Master suite collection. How to d/l & install?

I have an account and a license key code. I purchased a new laptop that doesn't have a dvd drive. I want to download CS6 Master Suite Collection but I keep getting error "cannot open as archive"!!! I have already located the d/l files, but they will NOT install. Does anyone know how to get around this problem?

if you downloaded an exe and 7z, they should both be in the same folder and click (or double click) the exe.
do NOT manually try to extract the 7z file.
if that doesn't solve your problem, what file names and extensions did you download and what are their file sizes?

Getting error while implementiong SAP note :Note 1240587 For MDM

Hi Experts,
I am tring to implement Note 1240587 - MDM 5.5 and 7.1 Low performance when MDM workflow is used.
The machine in which our MDM is implemeted is a Unix machine and i have created an executable jar (Including the Coding provided in the SAP note) in my Windows machine, have copied the jar in our MDM server.
when i am trying to execute the jar file i am getting error.
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
        UserSessionContext cannot be resolved or is not a type
        The method createSessionContext(String, String, String, String) is undefined for the type DeleteCompletedWorkflowJobs
        WorkflowTask cannot be resolved
        at DeleteCompletedWorkflowJobs.main(DeleteCompletedWorkflowJobs.java:35)
the coding of DeleteCompletedWorkflowJobs.java class is the same as provided by SAP in note.
Kindly suggest what should be i do in this case.
thanks,
Manjit

Hi,
Have you read the note correctly?
It is clearly mention that
Manual Activity
VALID FOR
Software Component     BBPCRM                        BBP / CRM
Release 400               Until SAPKU40017
Release 500               Until SAPKU50018
Release 520                Until SAPKU52010
Release 700                 Until SAPKU70009
Release 600                 Until SAPKU60009
Release 701                 Until SAPKU70104
Before implementing the automatic corrections from this note, implement Note 1487337 or import the relevant Support Package into your system.
I think This class CL_ABAP_DYN_PRG is not available in your system which comes with support pack mentioned as above or comes with the note 1487337.
So check in se24 whether this class is available or not and if not then apply note 1487337 first and then after apply 1590863.

Getting error while opening reports in EHS on portal

Hi,
I have deployed EHS Business package on portal. In the Industrial hygiene and safety role there is an iview "Standard Operating procedures". I am getting error
"Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: /global/services/java-iviews/com.sap.pct.ehs.reports.EHSReportGet." when i try to open any report on it. Can anybody please help me in this issue?

check the logs under httP://server:port/nwa-monitoring-logs and traces-sap logs
you can see the detailed description of the error

Getting Error While Opening the Oracle Form 6i in 10g

Hi All ,
FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.
I am getting above error message while opening Oracle 6i Form in 10g.
I get the following Alert message when I try to attach the library to my form -
Attached library name
S:\.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
If I select 'No', the Form compiles and runs without any error.
But if I select 'Yes', I get the following error message:
FRM-40039: Cannot attach library xxx while opening form.
All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
Help Appreciated.
Thanks & Regards,
Ram.

use the shiped batch program frmplsqlconv.bat to convert all your forms/librarys from Forms 6i to 10g.
you can call it in wizard mode from the start menu (e.g. OracleDeveloperSuite <OraHome> => Forms Developer => Forms Migration Assistant (GUI Mode) and follow the instructions step by step
or you can call it by batch to convert all your forms/librarys. The batch file is found in
<ORA10g_HOME>BIN\frmplsqlconv.bat
=>
frmplsqlconv.bat <formname>

Getting error while opening pdf on server

Dear All,
I am working on jdeveloper 11.1.1.4.0.
I have a use case where on click of link , generating a dynamic pdf. The pdf i am arranging with the help of itext through backing bean. It is generating as well downloading the pdf.I have used filedownloadlistner to call the generate and download pdf methods.
On integrated weblogic server the pdf is working fine, but when i deploy on server while opening pdf getting error :
*"Adobe Reader could not open 'test.pdf' beacause it is either not a supported file type*
*or because the file has been damaged (for example, it was sent as an email attachment and*
*wasn't correctly decoded)."*
I am not able to get the root cause for the problem. The sample code to generate and download pdf is :
// Generate PDF
private void generatePDFFile(FacesContext facesContext,
java.io.OutputStream outputStream) {
try {
System.out.println("In Generate PDF................");
Document document = new Document(PageSize.A4);
PdfWriter.getInstance(document, new FileOutputStream(FILE));
document.open();
addMetaData(document);
addTitlePage(document);
document.close();
System.out.println("End of PDF......................");
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
System.out.println(context.getRealPath("/"));
String FILE = "test.pdf";
File file = new File(FILE);
FileInputStream fdownload;
//BufferedInputStream bis;
byte[] b;
System.out.println(file.getCanonicalPath());
System.out.println(file.getAbsolutePath());
fdownload = new FileInputStream(file);
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
} catch (Exception e) {
e.printStackTrace();
Download PDF
private void downloadPDF(FacesContext facesContext, java.io.OutputStream outputStream) {
try {
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
ExternalContext ctx = facesContext.getExternalContext();
HttpServletResponse res = (HttpServletResponse)ctx.getResponse();
res.setContentType("application/pdf");
outputStream = res.getOutputStream();
System.out.println(context.getRealPath("/"));
File file = new File(FILE); // FILE = 'test.pdf'
FileInputStream fdownload;
// BufferedInputStream bis;
byte[] b;
fdownload = new FileInputStream(file);
//bis = new BufferedInputStream (new FileInputStream(file));
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
//outputStream.write(b, 0, b.length);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
outputStream.close();
fdownload.close();
} catch (Exception e) {
e.printStackTrace();
Any help will be appreciated.
Thanks
Kanika

If the pdf file don't open on the server where you created them, they won't open on the client side either.
The code you are using should be refactored to use different file names for the generated files. In a multi user environment (which every web application is) you overwrite the file generated with each new request, even before the file is loaded by a client. This will corrupt the file a client is loading and you get the error you see.
Next I would look into org.apache.commons.io package (http://commons.apache.org/io/) which has utility classes which allows easy handling of streams without looping over the data.
Timo

Error While Opening SAP Application

Hai To All,
When i open SAP i get the following error.
"This form is not included in the software package that u have purchased"
What is the solution for this?????????//
Regards,
Anitha

Ok,
Its license server problem. This error will occur with two problems.
1) After importing license file check
Administration>License>License Manager --
Tick all the check box of the user.
2) Check the License expired date.
Regards,
Anitha

Getting errors while opening SAP MMC for NWCE

Similar Messages

Maybe you are looking for