Getting event notifications for calendar I'm no longer subscribed to

Since updating to iOS 6, my iPhone has been giving me reminder notifications (with sound) for a calendar that I'm no longer subscribed to (a Meetup calendar). The events don't show up in iCal or my iPhone Calendar app, just when the notification happens... and when I swipe to look at the notification, it says it's from "untitled calendar". I can delete the event at that time, after the notification alert, but that's not helpful.
I've looked in iCloud and on my phone's settings, but I can't find this "untitled calendar" anywhere and so can't delete it or the ghost events.

I found why I don't receive the notifications into my calendar.
I don't know how this is possible, but the notifications are sended to another apple user ID that belongs to me.
I cleaned the contact information on the cloud and on the local contacts app. in my mac, my wife mac and all my ios devices.
Still I don't receive the notifications.
I managed to receive the an email for every notification since I changed the options on the icloud calendar preferences advanced tab.
But now, I put it back to in app notification, now I still get an email, but now I get two instead of one, one that informing that I refused the invitation and one for the invitation.
Any suggestions?

Similar Messages

  • Stamina Mode: LED Notification for Calendar Events

    Is there any application I should add to the Stamina Mode exceptions list in order to get LED notfications for calendar events? I have already added the respective calendar application to the list so sound notifications are provided but the LED will still not flash.
    I have stumbled upon a relevant thread (http://talk.sonymobile.com/t5/Xperia-SP/Xperia-SP-Notification-LED-and-STAMINA-Mode/m-p/326146/highl... but it is from the middle of 2013 and the information provided therein might thus be outdated.
    Hints/suggestions would be greatly appreciated.
    nvx
    EDIT (2015-03-11):
    I just noticed that -- even if Stamina Mode is turned off -- the notification LED lights up only after waking the phone up. Is this by design?  I mean, the whole purpose of a notification LED is to, well, notify the user about events that they have missed while the phone was locked / in sleep mode...

    Stamina mode has been designed to turn the LED notifications off, as an effort to save as much power as possible. However, in products from Xperia Z Ultra, Xperia Z1 and Xperia Z1 Compact and later, the LED illuminates when there is an incoming call or message when STAMINA mode is on.
    I tested here and it works like you say, the LED doesn't flash for calendar reminders even when Stamina is off. I will forward that as feedback but it may perhaps work if you download another calendar application as long as Stamina is off.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How can I stop notifications for calendar events in a shared calendar?

    I have a shared iCal calendar in iCloud. I share it with my wife, so she can see my work schedule. It is a bit annoying though that her iPhone keeps doing all my reminders and notifications for calendar events. I want her to able to see and edit my calendar but she'd like very much not to have her phone buzzing all the time.

    Andrei1,
         So are you saying that if I, rather than assigning a uint to the column and row number for each tile, just assigned a string to each one in the form "#_#" then I could actually just assign the "adjacent" array directly to it instead of using a generic object to hold those values? In this case, my click event would simply check the indexes, one at a time, of all tiles currently stored in my "selectArr" array against the column/row string in the currently selected tile. Am I correct so far? If I am then let's say that "selectArr" is currently holding five tile coordinates (the user has clicked on five adjacent tiles thus far) and a sixth one is being evaluated now:
    Current "selectArr" values:
           1_0
           1_1, 2_1, 3_1
                  2_2
    New tile clicked:
           1_0
           1_1, 2_1, 3_1
                  2_2
                  2_3
    Coordinate search:
           1_-1
    0_0, 1_0, 2_0, 3_0
    0_1, 1_1, 2_1, 3_1, 4_1
           1_2, 2_2, 3_2
                  2_3
         Essentially what is happening here is that the new tile is checking all four coordinates/indexes belonging to each of the five tiles stored in the "selectArr" array as it tries to find a match for one of its own (which it does for the tile at coordinate 2_2). Thus the new tile at coordinate 2_3 would be marked as valid and added to the "selectArr" array as we wait for the next tile to be clicked and validated. Is this correct?

  • Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this

    Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this?

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I have upgraded to an Iphone 6 and am at IOS 8.2.  My calendar alerts no longer show up as notifications on my phone.  I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

    I have upgraded to an Iphone 6 and am at IOS 8.2.  My calendar alerts no longer show up as notifications on my phone.  I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

    I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.

  • Getting double notifications for Outlook 2013 on Windows 8.1 pro

    Hi,
    I have Outlook 2013 installed on windows 8.1 pro 64bit. I am having an issue with outlook notifications, I am getting 2 notifications for each mail that I receive.
    I tried searching for the issue and found that I have desktop alerts enabled in Outlook settings and also windows 8 notifications for outlook in PC settings. Both these options generate their own notifications, so I get 2 notifications for each mail.
    When I turned off outlook notifications in PC settings, both the notifications stopped. Then I disabled desktop alerts from outlook settings and started getting only one notification.
    The issue is that both these notification look a bit different, outlook desktop alerts also show sender's photo which I prefer and I also have some outlook rules configured to show desktop alerts for only certain mails. So I want the desktop alerts to continue
    and stop standard windows 8 notifications for outlook.
    Does anyone know how to do that?
    Thanks in advance.
    SP

    Hi,
    As far as I know, Outlook email notifications are only shown in Window 8.1 if notifications are enabled in both Outlook and Windows.
    I suspect the rules are causing this double notification issue.
    You may export all the rules for backup, then start Outlook with the switch "/cleanrules":
    Win key + R, type "outlook.exe /cleanrules" in the blank box, press Enter.
    Check if the issue persists.
    If the issue is gone after running Outlook with "/cleanrules", then let's import these rules back to check the result.
    If the issue is back again, please check if any rules trigger the notification twice, use "stop processing more rules" as you need to stop the emails triggering more than one rule.
    Regards,
    Melon Chen
    TechNet Community Support

  • Why do I get three notifications for the same email?

    When I receive an email I get three notifications for it. I have no clue why...

    Yeah, it's just mail, and it's totally random, most of the times it's three notifications, and when I'm lucky it's just one i'll try the reboot - remove - add  algorithm

  • Why can't I get sound notification for my email anymore?

    I am no longer able to get sound notification for send or receive email nor can I get sound notification for incoming phone calls.  What happened and is there a correction?

    Before doing anything else, is your ringer switch in silent mode?  I'd try toggling the switch a few times to make sure it's working.  The phone should vibrate when you move the switch from on to silent.  If it doesn't then the switch may be broken.
    Next make sure the volume for notifications is not off.  Check the Sound settings for this.  Changing the volume there should also cause your (phone) ringtone to play.  If it doesn't then there is something very wrong.
    The only other thing I can suggest if the above doesn't help is doing a hard reset of the phone.  Hold power and home buttons down until screen goes dark and Apple icon appears, then let go.
    If that doesn't work, then the only other thing you can try is doing a Backup and then a Restore in iTunes.  If that doesn't work, then there's a hardware problem.

  • I do not get mobile notification for messages on ...

    I do not get mobile notification for messages on  Android device Please Help?

    Hi,
    Couple of questions:
    Are you on the latest Android version?
    Did you receive notifications in the past but they then stopped arriving?
    Do you receive calling and/or chat notifications only?
    Do you share your device with others who log into a different Skype account?
    Regards,
    Brad
    Microsoft Skype Notifications PM
    PM/PO Notifications RV
    Microsoft Skype Prague

  • Is there a way to get push notifications for social apps on the Droid Maxx

    Is there a way to get push notifications for social apps on the Droid Maxx? With text messaging, you will see a badge icon, but I wasn't sure if you could do that for social networks, too.

        @cmabbott85,
    I can definitely understand how important it can be to get your Facebook or Twitter notifications on your phone.
    As @rcshnoor mentioned, each app does have the option to turn the notification on or off. You need to launch the App and go into the Menu. Then go to App Settings and make sure notifications are checked.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • Event Notifications for Deadlock Graphs

    So, I was trying to setup emailing of deadlock graphs using event notifications. I followed the information I found in Jonathon Kehayias PASS information, but it appears (and maybe I am wrong) that event notifications and queues only work on
    the database you create them under??? I see it says in BOL: http://msdn.microsoft.com/en-us/library/ms189453.aspx that it applies to the instance, but when I manually create a deadlock,
    the queue only gets an entry if the deadlock was created accessing an object in the database where the queue was created. If I switch to another database, it does not add to the queue at all. Is that right? Or did I possibly configure something wrong? I can't
    believe that events would be restricted to only fire in the database scope of the queue. That just sounds like it would essentially make this tool kind of useless for broader scoping work, like, anything actually instance related. Does anyone know? 
    John M. Couch

    Wow, I have a bunch of other stuff in there that maybe I don't need. I actually created a separate database. I am guessing that because you used MSDB that you did not have to enable the service broker using the code below:
    -- Enable Service Broker
    alter database [SysAdm]
    set enable_broker;
    go
    I also noticed you did not create a route ? 
    create route [CaptureDeadlockRoute] with service_name = 'CaptureDeadlockService', address = 'LOCAL';
    go
    And this appears to be where I screwed up. I did not pull the GUID and use it in the Event Notification creation, I simply used Current Database. 
    -- Now query the sys.databases for the service_broker_guid of the msdb database.
    SELECT service_broker_guid FROM sys.databases WHERE name = 'msdb';
    In MSDB, create event notification using the GUID from above:
    CREATE EVENT NOTIFICATION evnDeadLock_Graph
    ON SERVER
    WITH FAN_IN
    FOR DEADLOCK_GRAPH
    TO SERVICE 'svcDeadLock_Graph'
    , '8D785814-2D75-490C-B07D-7303363A9B6B'; -- the GUID for msdb goes here
    And I noticed you did not use the mail cert as in his code. Did it not work, or did you just skip it?
    -- Create a certificate to sign stored procedures with
    create certificate [dbaMailCert] encryption by password = 'dhsfosjf' with subject = 'Certificate for Sending Email via Stored Procedure';
    go
    -- Backup certificate so it can be create in master database
    backup certificate [dbaMailCert] to file = 'R:\Path\dbaMailCert.CER';
    go
    -- Add Certificate to Master Database
    use [master]
    go
    create certificate [dbaMailCert] from file = 'R:\Path\dbaMailCert.CER';
    go
    -- Create a login from the certificate
    create login [dbaMailLogin] from certificate [dbaMailCert];
    go
    -- The Login must have Authenticate Sever to access server scoped system tables
    -- per http://msdn.microsoft.com/en-us/library/ms190785.aspx
    grant authenticate server to [dbaMailLogin]
    go
    -- Create a MSDB User for the Login
    use [msdb]
    go
    create user [dbaMailLogin] from login [dbaMailLogin]
    go
    -- Add msdb login/user to the DatabaseMailUserRole
    exec msdb.dbo.sp_addrolemember @rolename = 'DatabaseMailUserRole', @membername = 'dbaMailLogin';
    go
    John M. Couch

  • Not getting push notifications for mail

    Hello,
    I set up some email addresses in Mail (IMAP, for a business I started) this morning and I set up notifications so that I get banner notes and have "notification center", "badge app icon" and "show in lock screen" turned to ON for all the emails.
    Everything seems to be working right except I don't get any notifications until I actually activate the "Mail" app.
    I was hoping to get notifications when an email is received (the way my gmail app works).
    Is there a setting I'm missing to have my emails pushed to the phone to trigger a notification instead of the app only checking for mail when I open it up?
    I'm leaving it running in the background. I've tried restarting the app and restarting my phone.
    Thank you

    Do you have Fetch and Push turned on?
    Settings > Mail, Contacts, Calendars > Fetch New Data > Something Other than Manual?
    Settings > Mail, Contacts, Calendars > Fetch New Data > Turn on Push

  • Supplier is getting Closed notifications for message name EMAIL_PO_PDF

    Hi,
    Supplier is getting Closed FYI notifications for message name EMAIL_PO_PDF. Below is an example.
    Please suggest why they are generated and how to stop these notifications as supplier does not want to receive them.
    From: Production Workflow Mailer (D1556P) [mailto:[email protected]]
    Sent: Thursday, July 12, 2012 3:45 PM
    To: [email protected]
    Subject: Closed: KPN - Standard Purchase Order 3039086, 0
    You earlier received the notification shown below. That notification is now closed, and no longer requires your response. You may simply delete it along with this message.
    From               ROOS, C
    To               [email protected]
    Sent               18-JUN-12 22:10:57
    ID               865518
    Please review the purchase order and any other document attached to this message.
    Regards,
    Natasha

    Hi,
    Thanks for the response!
    The Autoclose_FYI parameter is set to Y already.
    Which parameter decides the end date for this type of notifications ? As we see end date is sometimes only 1 min and for others it is 20-30 days.
    Earlier the supplier was receiving only FYI notifications like KPN - Standard Purchase Order 3039086, 0+. Now, he is receiving Closed notifications like Closed*: KPN - Standard Purchase Order 3039086, 0_. How come the supplier is suddenly receiving FYI notifications with prefix CLOSED ?
    Regards,
    Natasha

  • I AM USING VR5.0 HOW DO I STOP GETTING UPDATE NOTIFICATIONS FOR BETA UPDATES INSTEAD OF JUST WHEN UPDATE IS FINALIZED FOR GENERAL USE?

    MY QUES SUMS UP THE ISSUE.....I ONLY WANT UPDATE NOTIFICATIONS FOR THE FINAL UPDATE OF A NEW VERSION

    You settings and such are in a separate place and not in the Firefox program folder as has been the case since the browser was known as Phoenix 0.1
    Your settings like Bookmarks, history and such are in a Profile. If you uninstall Firefox and then install same or another version you will find that your settings are still there since it will use the last Profile used unless selected otherwise upon Firefox start.
    https://support.mozilla.com/en-US/kb/Profiles
    https://support.mozilla.com/en-US/kb/Managing-profiles

  • Where do I go in iTunes to get push notifications for apps on my iPhone 4??

    My phone keeps showing up that I have to connect to iTunes because some of my apps my require alerts, sounds, and badge icons to get push notifications. Where do I go after I hook up my phone to iTunes??? I can't seem to find the right place!! HELP!!!!!

    http://support.apple.com/kb/HT3576

Maybe you are looking for

  • TS2972 how many IOS (iPads) can be used at the same time, and as a maximum, with home sharing?

    I would like to use multiple iPads at my residence and use home sharing for guests to watch content from my i-tunes, all on the the same network. what is the maximum number of IOS devices that can used at the same time, and be authorised on the "home

  • Can QT 7 pro isolate audio from combined audio/video tracks?

    I just upgraded to Pro to try to convert small video clips (.mov files) taken on an HP digital camera into an iMovie-compatible format- they will play fine in QT (both audio and video), but there is no separate audio track. No matter what format I sa

  • Open parameters for linux version

    Do acroreader's open parameters work for the linux version? I know in Windows they are written as 'acroread /A page=xxx ...' and for linux firefox as 'file://...#page=xxx'. But how about the arguments in command line?

  • Debug steps

    Folks, I am hitting the classic: ERROR at line 1: ORA-23313: object group "PUBLIC"."MY_REPGROUP" is not mastered at MASTERDB error when I try and execute BEGIN DBMS_REPCAT.CREATE_MVIEW_REPGROUP( gname => 'MY_REPGROUP', master => 'MASTERDB', propagati

  • How to switch off the rollover help tips

    Does anyone know how to stop the yellow help boxes appearing when you roll the cursor over things? Cheers