Getting fetch files back in to iweb

Hi folks
I recently suffered a hard drive crash which wiped out my sites files created on iweb
The site is still up and running, and Fetch has all of the files intact
My question is, how do I put those files back in to iweb, so I can change them, and thus, the site's content?
Help will be appreciated
Using mc OS 10.6.3
The site is
http://jimmyrobinsonmusic.com

Jimmy ~ If you don't have a backup of iWeb's key Domain file, usually located here:
...paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html
Or, if you feel this way...
_Domain file - iWeb becoming a headache_

Similar Messages

How can I get my site back (done with Iweb) on my new hard drive? I had to change my hard drive after droping my computer.

Can someone help me. I had to change my hard drive few weeks ago and lost everything. I made a site via iweb and my site is still on line but I don't know how can I get my site back on my iweb with my new hard drive.

Patrick ~ Welcome to the Support Commuities. Here's where iWeb's key Domain file (containing your site data) is usually located:
...But rather than backing up just that file, consider using Time Machine and/or SuperDuper.

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT ?

A ROUND-ABOUT PROBLEM
RECENTLY I GRADUATED FROM. FCE AND FCE HD. I DECIDED TO INSTALL FCP 5. I HAVE POWER BOOK G4 V10.4.8, PROCESSOR 1.5 GHZ PC SDRAM WITH INTERNAL MEM 80 DISK STORAGE AND 1 GB DDR SDRAM. I ALSO HAVE AN EXTERNAL LaCIE WITH 200 CAPACITY.
IN THE PROCESS OF INSTALLING FCP, THE STUPID THING I DID WAS TO CHANGE NAME OF THE MEDIA FILE, AND THIS ACTION CAUSED ALL MY FILES GO OFFLINE. THE OPTIONS GIVEN TO ME BY THE RECONNECT FILLES TABLE BOX TO GET BACK MY FILES ARE:I TRIED TO USE BOTH BUT WITH NO SUCCESS.
I WOULD BE GRATGEFUL TO ANY ONES WHO COULD HELP ME RECOVER MY FILES WITHOUT GOING INTO THE PAIN OF CAPTURING THEM FROM TAPE.
FOR THOSE OF YOU WHO HAVE THE PATIENCE PLEASE READ MOR BELOW. THANK YOU SO MUCH.
WHEN I TRY I GET A WARNING WHICH SAYS:
THE FILE FORMAT OF THIS PROJECT IS FROM AN EARLIER VERSION. WOULD YOU LIKE TO UPDATE THIS PROJECT?
NOTE: ONCE SAVED, THIS FILE CANNOT BE OPENED BY PREVIOUS VERSION. TO AVOID OVERWRITING THE ORIGINAL PROJECT FILE , YOU CAN CHOOSE SAVE PROJECT AS FROM THE FILE MENU WHEN PROJECT UPDATING IS COMPLET
WHEN I SAY YES, ANOTHER BOX APPEARS: UPDATE PROJECT. IT SAYS THE FOLLOWING:
THIS PROJECT CONTAINS ONE OR MORE SEQUENCES WHICH THIS VERSION OF FINAL PRODUCT PRO CAN RENDER WITH MOTION TAP QUALITY(NAMELY SCALIBG, ROTATION, ETC). PLEASE CHOSE A SCALING QUALITY TO USE (“FASTEST” RECOMMENDED IS THE QUALITY LEVEL 4.5.
NEW QUALIT Y CHICKED INSIDE THE BOX ARE: BEST, NORMAL, FASTEST OR LINEAR . THE UNCHECKED LITTLE BOX READS: REMOVE EXISTING FILES (THIS ACTION IN NOT UNDOABLE
WHEN I PRESS OK “OFFLINE FILES” BOX APPEARS AND SAYS:
SOME OF THE MEDIA OF YOUR PROJECT REFERENCES EITHER CHANGED, MOVED, OR GONE AWAY.YOU CAN EITHER RECONNECT THESE FILES , OR CONTINUE WITH THEM BEING OFFLINE. BELOW THIS SAYS AS FOLLOWS:
FORGET FILES. BELOW THAT THERE IS AN UNCHED BOX WHICH SAYS: MEDIA FILES 69 OFFLINE
WHEN I PRESS CONNECT INSTEAD OF CONTINUE , THE RECONNECT FILLES BOX OPENS AND 69 OFFLINES FILES APPEAR. IN THIS RECONNECT FILES BOX THERE ARE 2 SECTIONS
THE 1ST SECTION HAS A LITTLE UNCHECKED SKIP FILE BOX AND ANOTHER LITTLE CHECKED BOX WHICH READS: SEARCH SINGLE LOCATION. WHEN I OPEN IT TWO OPTIONS ARE GIVEN AS FOLLOWS:
MACINTOSH HD: USERS WITH MY NAME AND DOCUMENT
LaCILE:FINAL CUT PRO DOCUMENTS; AUTO SAVE VAULT WITH THE TITLE OF MY FILE
WHEN I PRESS RECONNECT I GET THE FALLOWING PATH :
MY NAME.>MACINTOSH HD >APTS FCT 5 >GRAY FILES
WHEN I CHANGE THE SHOW BOX TO REVEAL FILES .I GET OFFLINE
WHEN I ADD RESEACH, IT TAKES ME TO THE A CHOOSE A FOLDER WITH THE FOLLOWING PATH:
MY NAME>LACIE DISK>FINAL CUT DOCUMENT >FOLDER >GRAY FILES WHICH CANNOT BE RVEALD., AND WHICH I CANNOT CHOOSE. IT GOES ON AND ON IN A CIRCLE WITHOUT HELPING ME TO GET MY FILES IN FCP FORMQAT.
WHAT SHOULD I DO MORE TO GET MY FILES BACK IN THE FCP FORMAT WITHOUT BEING STUCK TO OFFLINE FILES FOR EVER? YOUR STEP BY STEP TO WALK ME THROUGH TO REESTABLISH MY FILES WOULD BE GREATLY APPRECIATED.

A round-about problem
I thank you all for your very kind replies. I have rewritten my issue in lower case as suggested by all of you. I hope I will be helped.
Recently, I thought I had graduated from final cut express and final cut express HD when . I decided to install final cut pro. Perhaps a wishfull thinking!
I have a power book g4 v 10.4.8, processor 1.5 ghz sdram with internal memory of 80 storage disk and 1 gb ddr sdram. I also have an external LaCie with a 200 storage capacity.
In the process of installing final cut pro, I stupidly changed the name of the media file. Maybe this action caused all my clips, video and audio, files go offline. The options given to me by the Reconnect Files Table , to get my files back, are : Single Search Location and Search.
I tried and tried both with no success. I would be grateful to any ones who might be able to help me to recover my clips without going through the pain of recapturing them from the tape. There are several tapes to be recaptured.
Now, for those of you who may have the patience, please read more below to see what I have gone through.
When I try to get to the files, I get the first warning: “The file of this project is from an earlier version. Would like to update this project?” And then it continues: “Note, once saved, this file cannot be opened by previous version. To avoid overwriting the original project file , you can choose Save Project As from the File Menue when the project updating is complete”. (It was at this point where I changed the files names formatted by the previous versions).
When I say Yes, another box appears: Update Project. It reads as follows:
“This project contains one or more sequences which this version of Final Cut Pro can render with Motion Tap (i.e. scalable, rotation, etc). Please choose a scalable quality (“fastest” recommended is the quality level 4.5. New Quality checked inside the little Box are: Best. Normal Fastest or linear." I choose Normal. The unchecked little Box reads: "Remove existing files ( this action is not undoable, it says”.
(By the way, in my project no sequences, have been set up as yet; they are all clips inside the bins with red slash in all clips).
When I press OK, “Offline Clips” Box opens and says the following:
“Some of the media of your project references either changed, moved, or gone away. You can either Reconnect these files, or Continue with them being Offline”. Below this it continues:
“Forget files.” Below that there is an unchecked box which says: “Media Files 69 Offline”.
When I press Connect instead of Continue, the Reconnect Files Box opens with 69 Offline files. In this Reconnect Files Box there are two sections’
The first section has a little unchecked Skip Files Box and another little checked Box which reads: “Search Single Location”.
When I open it, two paths are given to recover my files:
My name>LaCie> Final Cut Document>Folder>Gray files which cannot be revealed, and which I cannot open. I go on and onl ike a checken without a head in a circle without being able to get to the files off Offline.
I have the same problem with the second path: My name>Macintosh HD>FCP 5>gray files.
What should I do more to get my clip files back in the FCP format without being stuck to Offline files for ever?
I am new to this field and enjoy what I am doing. I am old, and sometime my head goes off. Your expert step by step walking me through to reestablish my file linkage with Media would be greatly appreciated. Thank you all and have a nice holiday. Faruk Sabet

I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

Your redemption code was used to acquire an activation code. The activation code is what you need to use when you want to reinstall/enable the software again. Check your Adobe account online to see if the number(s) can be found there.

How to get offline files back open?

How do I get my files back from being "offline" in my multitrack session? I by mistake closed a few files and now when I open them again in my media browser they still show as "offline" and cant' seem to get them back open to work with them again. I didn't delete anytying, why are they still showing offline ifI opened up the original file I used again?

Once you've got the file(s) back into the file area with the session file, go to Clip>Link Media. Or if there are a lot of original files, Link All Media.

Elements 12 organiser has changed all raw files to jpeg - how do I get raw files back?

Cannot edit raw files as Elements (12) seems to have changed them all to jpegs - can anyone let me know how to get raw files back?

Hello Jim,
Many thanks for your response. Wondering if we did something in Elements preferences? Usually, when thumbnails are opened in the editor, it’s a raw file to work on. However, all the thumbnails, when opened in the editor, are all of a sudden opening as jpegs …. not raw. o it looks as though all the raw files are now jpegs, and we don’t know how to get them back.
Any help you can offer will be gratefully received, as my husband works on his photos in Elements and it’s driven him mad!
Many thanks & regards.
Kim

Can I get my files back after emptying my trash

can I get my files back after emptying my trash

Try DataRescue3. You can download a demo that will scan your drive and tell you what it finds. If it finds deleted files that can be recovered, you can purchase the app and recover the files. I have used it, and it works great.
Note: when you empty the trash, the files are not actually erased, the pointers to the files are simply deleted from the disk directory/catalog. As long as the actual locations of the files are not overwritten by something new, the files are usually recoverable. So, the best thing to do is not save anything new until you have recovered what you just deleted.
Further note: if you did Secure Empty Trash or Erase Free Space after deleting files, then the deleted files are actually overwritten with 0's and they are not recoverable.

My macbook air has randomly wiped itself clean how do i get my files back?

i have been on vacation when i got back home i opened my mac and it had been completely wiped clean any suggestions on how to get my files back?

Then you have a problem...
Did anyone else have access to it while you were gone? Exactly what state was it in when you fired it up? They can't just spontaneously wipe themselves.

I deleted my files and emptied the trash. can i get the files back?

I deleted my files and emptied the trash. Can I get my files back?

Maybe...
If you have a removable battery, remove the battery and the power.
If not, hold down the power button until the screen goes back and you are forced to restart the Mac entirely from the power button (do not respond to any shut down window.
Either way, files may reappear in the trash, or where they were located.
If not, you'll probably need a data recovery program*:
http://www.macmaps.com/backup.html

If pages closes unexpectedly is there anyway to get my file back?

If pages closes unexpectedly is there anyway to get my file back?

Someone with Lion or newer system has to answer this but I think that if you didn't save it a first time it is lost.

1/23/14 update erase a dll file and who knows what else. I had to restore my computer back several months to get the file back. I just got another update package. Is it safe to use?

1/23/14 update erased a dll file and who knows what else. I had to restore my computer back several months to get the file back. I just got another update package. Is it safe to use?

Thank you. After two system restores and three program removals using the control panel I got itunes back. I would feel better if Apple would include items you don't need options in installs so that the constant checking for what is not there would not create problems. For me it was MobileMe associations. I never would have thought of Bonjour and (Quicktime - which I don't even use but did not remove just in case)
Again, Thanks!.

I restored my hard drive, how do i get my files back for iweb

I had to restore my hard drive on my imac. I had backed everything up with time machine prior to the restore. I have been able to get everything back up and running except my iweb. The program and icon are showing but i cannot get my website back in the program.

iWeb needs the domain file where it stores its content. The picture shows where it should be.
If you made a backup you can restore it.
If the backup is missing, you'll have to start from scratch. You cannot import published HTML pages.
It's often discussed in this forum.

How can I get specific files back from my Time Machine backup?

I wanted to make a fresh install on my MacBook Pro, in order to only have Java 8 instead of any older Java versions. So far so good. But now I want to get specific files/libraries from my external backup (USB):
One Parallels Virtual Machine
My old mail
My iPhoto Library
I don't need any settings for these, since I can easily configure them again.
I already used the Migration Assistent to restore all apps.
How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
Hans

How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
You will want to add the same User account(s) which hold the data you want to restore. So you will want to add a User account of 'Hans or hans'. Check your Time Machine back up drive to see how the User account is labeled (Hans or hans). Navigate to the Users folder and see how it's labeled.
You can then use your Time Machine back up drive and navigate to the User Home folder to copy its data over (e.g. contents from Documents, Downloads, Music, Pictures, etc.). Repeat for other Users.

How do I get a file BACK to camera raw in CS5?

I worked on a file in camera raw, and accidentally pressed enter (well, I actually pressed it on purpose, thinking that would just accept the action I was working on), which sent the file to PS. I wanted to continue working on the file in camera raw, but I can't figure out how to get the raw file back to camera raw.
Help please.

One way was given above.Other way --go to Bridge & right click thumbnail and clear Develop settings.That is it.
Basically ,pl note that all changes made in Raw are stored in XMP file that is generated beside the original one.No Changes are made in Raw file.Open Bridge Keep track of one thumnail and delete its XMP file in explorer.The moment u delete the XMP file , ur thumbnail is restored to original. U have the same non-destuctive nature in Lightroom also but in a different fashion.Since ur question is basic now, U are going to enjoy RAW editing after going deep into it.Have a nice learning

Getting fetch files back in to iweb

Similar Messages

Maybe you are looking for