Getting file names of different groups in a data portal

Hi,
I am finding difficult to retreive the file names of the different groups loaded in the data portal. For example, say I have loaded two different files of same ext .tdms in to the data portal which automatically assigns as two groups. My objective is to retreive the file name of the two groups loaded using VBS in diadem 11.1.
Can anyone help me in this regard.
Regards,
X. Ignatius
Solved!
Go to Solution.

Thanks Andreas,
I have got a plugin which loads the multiple lvm files with their sourcefile name. Earlier it would be like Labview Data, Labview data1, Labview data2.... when multiple files are loaded. Now with this plugin attached in the startup script, all the files are loaded with their original file names.
Attached the plugins, place the Custom LVM Load Event. Vbs in the start up script, the other attachment is the function callled by the main script.
Regards,
X. Ignatius
Attachments:
Custom LVM Load.VBS ‏1 KB
Custom LVM Load Event.VBS ‏2 KB

Similar Messages

  • GET FILE NAME C:\temp\ADIBO.txt

    Hi,
    How to get file name?
    I used Get_File_NAME, but I'am getting an error.
    lv_lfilename is not the type LOGICAL_FILENAME
    C:\temp\ADIBO.txt
    I need to get  ADIBO ??
    tnh, Adibo..:)
    I am using this code to download file and after that I need to get FILE_NAME:
    DATA:  lv_lfilename TYPE string.
    PARAMETERS:
      pa_lfile TYPE zlocalfile
               DEFAULT 'C:temp'.
        CONCATENATE pa_lfile ''INTO lv_lfilename.
        CALL FUNCTION 'GUI_DOWNLOAD'
             EXPORTING
                  filename = lv_lfilename
                  filetype = 'ASC'
             TABLES
                  data_tab = it_billit_down.
        IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.

    Hii..
    You have to Maintain the Logical filenames and their Physical Paths in Tcode FILE.
    Then create a program like this..
    REPORT  ZSEL_FILES1.
    DATA : V_LOGFILE TYPE STRING.
    DATA :V_PHYFILE TYPE STRING.
    DATA : ITAB TYPE TABLE OF SCARR.
    START-OF-SELECTION.
    SELECT * FROM SCARR INTO TABLE ITAB.
    **To get the Physical file based on the Logical file names - Maintained in Tcode FILE
    CALL FUNCTION 'FILE_GET_NAME'
      EXPORTING
       CLIENT                        = SY-MANDT
        LOGICAL_FILENAME              = VlOGFILE
      OPERATING_SYSTEM              = SY-OPSYS
      PARAMETER_1                   = ' '
      PARAMETER_2                   = ' '
      PARAMETER_3                   = ' '
      USE_PRESENTATION_SERVER       = ' '
      WITH_FILE_EXTENSION           = ' '
      USE_BUFFER                    = ' '
      ELEMINATE_BLANKS              = 'X'
    IMPORTING
      EMERGENCY_FLAG                =
      FILE_FORMAT                   =
       FILE_NAME                     = V_PHYFILE
    EXCEPTIONS
      FILE_NOT_FOUND                = 1
      OTHERS                        = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    **To download the file to PC.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      BIN_FILESIZE                    =
        FILENAME                        = V_PHYFILE
       FILETYPE                        = 'ASC'
      APPEND                          = ' '
       WRITE_FIELD_SEPARATOR           = 'X'
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
    IMPORTING
      FILELENGTH                      =
      TABLES
        DATA_TAB                        = ITAB
      FIELDNAMES                      =
    EXCEPTIONS
      FILE_WRITE_ERROR                = 1
      NO_BATCH                        = 2
      GUI_REFUSE_FILETRANSFER         = 3
      INVALID_TYPE                    = 4
      NO_AUTHORITY                    = 5
      UNKNOWN_ERROR                   = 6
      HEADER_NOT_ALLOWED              = 7
      SEPARATOR_NOT_ALLOWED           = 8
      FILESIZE_NOT_ALLOWED            = 9
      HEADER_TOO_LONG                 = 10
      DP_ERROR_CREATE                 = 11
      DP_ERROR_SEND                   = 12
      DP_ERROR_WRITE                  = 13
      UNKNOWN_DP_ERROR                = 14
      ACCESS_DENIED                   = 15
      DP_OUT_OF_MEMORY                = 16
      DISK_FULL                       = 17
      DP_TIMEOUT                      = 18
      FILE_NOT_FOUND                  = 19
      DATAPROVIDER_EXCEPTION          = 20
      CONTROL_FLUSH_ERROR             = 21
      OTHERS                          = 22
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    <b>reward if helpful</b>

  • Error in reciever file adapter , where i am getting file name dynamically

    hi all,
    error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

    i am getting new error
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
    this is my strcuture
    and i have changed my structure
    <HEADER>
    <ADDRESS1/>
    <ADDRESS2/>
    <ADDRESS3/>
    <ADDRESS4/>
    </HEADER>
    <HEADER_GST>
    <TAX1/>
    <TAX2/>
    <TAX3/>
    </HEADER_GST>
    <LINE>
    <QTY/>
    <UOM/>
    <UNIT_AMT/>
    <CHARGE_TO_DT/>
    </LINE>
    <FILENAME>
         <FILENAME/>
    </FILENAME>
    i have given the recordset structure as
    HEADER,HEADER_GST,LINE,FILE

  • How to get file name of the form attachment?

    Hi,
    is there anybody who is able to help me with the following problem???
    I started my process from Workspace ES and as a first step I attached one locale file (IMG.JPG or IMG.TIF e.g.) as a form attachment. I used "Attachments" bookmark in the Workspace ES.
    I need to get file name of attached file in the process!!!
    I tried to use "getTaskAttachments" component to get file name of form attachment but without success. This component successfully obtained attached file an stored it in the variable (type list, subtype document) but didn't produce all file attribute informations such as basename or Content Type:
    Is there some possibility to obtain file name (including file extension) by using "standard" tools and components of ALC?
    Thanks for your suggestions.

    Hi LekomDev,
    I faced the same situation some time back and this is what I know.
    Based on the file type few of the attributes will or will not be populated. (This is what the official documentation says about Document attributes)
    The file name that you are looking for would mostly be in 'name' attribute of Document object. The 'wsfilename' attribute is the atrribute which gets used to show the file name into Attachments tab of the workspace.
    So, if you are just interested in knowing the filenames then 'name' attribute is the place that you are looking for.
    But if you are trying to solve an issue in which Attachments against a Task isn't showing the filenames properly then you would need to copy the 'name' attribute value into 'wsfilename' attribute and then the Attachmetns against a Task would have the correct names.
    Tip: Use the Record and Playback option of the workbench to inspect the Document variable and you would see all of the values for a Document variable at desired step in your orchestration.
    hope this helps,
    cheers,
    Parth Pandya
    Blog: http://livecyclekarma.wordpress.com

  • Need to get file name and directory back from file adapter - WRITE

    I am using the file adapter to write a file. I want to log the file name of the file we just created. Since we use a precise timestamp in the file name, I can't accurately guess.
    I have an invoke in my BPEL process to the file adapter. My first try was to assign the jca.file.FileName property to a variable, but it never comes back. I looked around and saw plenty of ways to SET the file name for a write and GET the file name for a read, but no GET file name for WRITE.
    Anyone have a solution?
    Thanks in advance!

    I think I got your point... You can tell FileAdapter the filename to write, but if you don't then FileAdapter can not tell you the filename that it wrote... I think it is pretty possible Oracle didn't implement the latter, as the write operation is probably asynchronous and the filename is calculated later on...
    If what you want is just log, you may achieve your requirement by increasing verbosity on Adapter logs... Have a look at the link bellow...
    http://docs.oracle.com/cd/E15586_01/integration.1111/e10226/ad_mon.htm#CJHHBBID
    Otherwise, the solution for you will be to calculate filename yourself, and that will be a little bit of reinventing the wheel... But at least you will know the filename...
    Cheers,
    Vlad

  • Determining File Name in Info Package under External Data

    Determining File Name in Info Package under External Data
    I am on SAP BW 3.0. A System is sending a flat file every few days
    With a date time stamp, e.g., d:\loaddar\file_20080212_122300.csv
    I know in Info Package one can create routine under external data to determine the file name. I have seen
    Examples where people determine file name based on date. Since my file has a time stamp, what code  I write a  to pick the file. Is there a way to read one or more files and
    Determine file name.
    I am new to SAP BW and ABAP. However, I have lot of experience with Oracle and Java.
    Can someone point me how this will be done. I am looking for some sample code as well.
    Thanks in advance. I will really appreciate your help.

    Hello Prem,
    Even i used to get the file suffix with date & time, and i found very difficult to pick up the file from application server using routine in infopackge. Then i asked to change to date only and it was easy to pick the file using routine. But i think in your case files are coming more than once, in such a case you should write a small unix script to add these files and then convert into single file with date only and execute the infopackage to load it.
    Cheers!
    Sanjiv

  • OS command to get file name

    Hello All,
    Using a single receiver communication channel I have to generate 2 output files.
    One output file name is OUTPUT.txt and the second output file name is OUTPUT<YYYYMMDD>.txt
    I am generating first output file name using standard file name scheme.
    And for generating second output file name I am using Run OS command option.
    can some one tell me the OS command to get the file name OUTPUT<YYYYMMDD>.txt?
    Thanx,
    Regards,
    Moorthy

    We would really like like to know how you are going to create 2 file (with different names) using same CC.
    If you are going to use "Add timestamp" then both the files will have timestamp at the end (unlike your requirement for the first file).
    I think its better to create 2 CC ..first with output.txt and the other OUTPUT<YYYYMMDD>.txt
    Also, please tell us more about ur requirment..if the content is same then..u can simply use a CC and use OS command (after processing option ) to copy it to the other location with required file name (OUTPUT<YYYYMMDD>.txt)
    Something like this  if u r using unix system and both the files are at same location:
    cp OUTPUT.txt OUTPUT2.txt

  • Udf to pass constant corrsponding to 2 file names from different location

    if i have one source file, i m able to pass the file name directly to the target through the udf below:
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return ourSourceFileName;
    But i have 2 files from different location. Now both files has dates at the end. how can i pass AAA for File1.txt and BBB for File2.txt. .
    after the above code, i have included below code too, but not working(*-for date n timestamps):
    if(ourSourceFileName.equals("ABC*.txt"))
    return "FILE1";
    else if(ourSourceFileName.equals("XYZ*.txt"))
    return "FILE2";
    please suggest

    Hi Basker,
    Error in activating object in IR - heres the total code i have used for this purpose. plz help in getting this.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    if(ourSourceFileName.equals("SOURCE_1*.txt"))
    return "File1";
    else if(ourSourceFileName.equals("SOURCE_2*.txt"))
    return "File2";
    Source code has syntax error:  /usr/sap/DXI/DVEBMGS31/j2ee/cluster/server0/./temp/classpath_resolver/Map27461f402eff11e0898d00144f1e71f0/source/com/sap/xi/tf/_MM_UPDATE_.java:839: unreachable statement if(ourSourceFileName.equals("SOURCE1_*.txt")) ^ /usr/sap/DXI/DVEBMGS31/j2ee/cluster/server0/./temp/classpath_resolver/Map27461f402eff11e0898d00144f1e71f0/source/com/sap/xi/tf/_MM_UPDATE_.java:844: missing return statement } ^ 2 errors

  • How to get File name in Proxy program

    Hi,
    According to my business scenario, one XML file name comes from Legacy system and stores in a predefined directory. Now XI has to pick up that XML file and needs to call BAPI's which in turn updates the Target system ( SAP Tables).
    Now my problem is , XML File name is a combination of three fileds those are DATE , OBJECTKEY AND WORKFLOWNAME.
    Ex : YYYYMMDD_1234565789_WORKFLOWNAME.XML
         DATE_OBJECTKEY_WORKFLOWNAME.XML
    In proxy i need to get the file name and split into three fields ( those are DATE , OBJECTKEY AND WORKFLOWNAME ) which needs to send as import parameters in BAPI's.
    So please let me know from anyone in this group how to get the file name in the proxy program.
    Thanks & Regards
    K. naveen Kumar

    Hi,
    have a look at my new weblog:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    to see how you can access filename
    Regards,
    michal

  • Get File name of the inbound file during mapping

    Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
    The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
    Any idea about how to do this?
    (I went through few options of using java.util.map. not successful yet)

    Hi Anand,
    I posted the same question a time ago, without any help....
    Can I find out the full filename of input file in message mapping?
    Posted: Nov 23, 2004 1:00 PM
    I have in XI 2.0 the following scenario :
    In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
    So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
    What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

  • How to get file name and set it as static text in a dialog

    Hi,
    I m new to InDesign Programming.
    I have a menu that creates a dialog with different controls in it.
    The dialog will appear only if there is an open file. I need to display the name of the open file as a static text in the dialog. I know to get the name of the current file but don't know how to pass this each time the dialog is opened.
    Can someone help me in doing this?
    I m using InDesign CS3 in MAC OS.
    Thank You.

    those are the methods, but you can't use getCharacterEncoding(), actually, cuz it seems it's not necessarily filled in.. or at least that might be on some servers only, like Tomcat 4. As for encodings, you need to do a search for character encoding names and use the appropriate one.

  • Ho to get file name and full path of a local file

    I want to be able to get the file name and it's full path of
    a local file. I was thinking of using "FileReference" but
    FileReference doesn't permint accessing the local file path. Can
    anyone suggest a way of doing this.
    Thanks

    You will have to create 2 different versions.
    See this example we have created using JSystem
    http://jsystem.flashjester.com
    Download the example file provided.
    Hope this helps.
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. - www.flashjester.com
    "This has been one of the most impressive and thoroughly
    pleasant
    experiences of customer support I have ever come across -
    astounding!"
    Director - hedgeapple

  • Get file name from folder

    Hi all,
    how to find a .txt file in a particular folder. My text file comes with
    following name <fixed_name>.<mmddyy><hhmmss>, e.g., fn_fnprod.102806015605
    so how to get this file name. nd also tell me if there are multiple files
    then how to retrieve the oldest one first and so on....
    Thanks & Regards
    Gaurav

    it's fine but how to know which is older file b'cpz
    this file comes every day with new date & time. so
    what if there a multiple file. nd i have proceed
    oldest first.
    pls help asapget each file last modifed, using file.lastModified() method and compare which file you would be needing. =)

  • Get File name from incoming IDoc

    HI All,
    I am in an IDOC to File scenario using Fcc. (R/3 --> XI --> 3rd party)
    I need to use the  idoc-number(EDI_DC40-Docnum) as my output file name. I planned using variable substitution but there it expects me to get the idoc number from payload which I do not have it in. (refer c ode below)
    As I understand, variable substitution can be used only on payload(the FINAL data set that we will be writing to the file).
    Can we use the data which is part of incoming IDOC and not part of payload(final data what we are writing to file).??
    Other idea was to map this IDOC no to a field in final file, but this field should not be written in the output file, so am confused about how to achieve this.
    E.g
    *Incoming Data*
    IDOC
      |_EDI_DC40
        |_DOCNUM
    Final data (Payload)
    Header
    Data
    Trailer
    As seen in my example above I do not have the IDOC no in the final data so how do I use the Idoc no as my filename? Apprecaite your help on same.
    Regards
    Shirin

    Hi
    You can use dynamic configuration to get the file name .
    Use Adapter Specific Message Attributes for the target Comm Chanel check the indicator for filename in the advanced tab of CC
    create a UDF with i/p as file name  i.e the Idocnum field and
    paste this code
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    //conf.removeAll();
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //String filename= conf.get(key);
    conf.put(key, fileName);
    key= null;
    return fileName;
    PS: use cache as value in UDF
    ands assign the o/p of this UDF to a root node

  • Get file name

    Hello world,
    Am writing a small server application that can accept files and save them locally. Now, the server is working, but am finding it very hard to get the name of the file that's been sent so that I can save the file with that name and its extension.
    e.g. I want if I sent a hello.java file, then, the server will save it as hello.java. But at the moment, its not saving it like that because there is no way can get the name of the file from the client.
    Here is my code:
    import java.io.*;
    import java.net.*;
    class Server {
        static final String ToSave = "C:\\";
        static final int PORT               = 2391;
        public static void main(String args[]) {
            while ( true ) {
                try {
                    ServerSocket socketServer = new ServerSocket(PORT);
                    Socket socket = socketServer.accept();
                    //Assuming we have a file name (FILENAME)from client
                    FileOutputStream fos = new FileOutputStream(ToSave + FILENAME);//<--HERE IS WERE i WANT THE FILENAME
                    BufferedOutputStream out = new BufferedOutputStream(fos);
                    BufferedInputStream in = new BufferedInputStream( socket.getInputStream() );
                    int i;
                    while ((i = in.read()) != -1) {
                        out.write(i);  
                    out.flush();
                    in.close();
                    out.close();
                    socket.close();
                    socketServer.close();
                    System.out.println("Transfer complete.");
                catch(Exception e) {
                    System.out.print(  e  );
                try {
                    Thread.sleep(1000);
                } catch (InterruptedException ie) {
                    System.err.println("Interrupted");
    }

    You have to define a protocol which enables the
    client to tell the server the file name.
    BTW creating server sockets inside a loop is not a
    good idea.
    Thank you very much :)
    I've got the idea on how to implement it now. All I have to do is:
    first connect to the server and send a message containing the name of the file and then, at the server end, I will receive the name and use it to save to incoming file.
    Thanks again.

Maybe you are looking for