Getting File not found error when trying to preview in Captivate 8. Have used this before without an issue, so not sure why it's happening now.

Please help me troubleshoot this. I cannot preview in either Chrome or IE. Thanks.

Hello,
Welcome to Adobe Forums !
Try to run Captivate as Admin and then test the same behavior (Right click on Cp icon and click run as admin) .
Is it possible for you to post a screenshot of your General preferences , GO to EDIT > Preferences> General.
It seems that your project cache folder is located on a network drive.
Thanks
Himanshu

Similar Messages

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

I get an web service error when trying enable web services. I have latest update and rebooted

i get an web service error when trying enable web services. I have latest update and rebooted

hi there philnj,
could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

Disc burner or software not found error when trying to burn

everythime I try to burn I get the disc burner or software not found
Can anyone help PLEASE

That program has NOT worked for me. I was hoping - in fact it seemed to slow down i-tunes horribly loading and caused it to hang several times.
IN the past I had this problem and had to edit a configuration file. Everything was fine until I updated, and no matter what I can't seem to get it working again.
I've been doing this:
http://docs.info.apple.com/article.html?artnum=300403
Or trying to - the file doesn't come up nice and neatly like they would have you think - it comes up all run together, word wrap or not.
After changing that line 10 thousand ways until Sunday, with a 0, with a zero, with a carriage return, with a pipe, with a space...nothing is working!
I constantly get a error on i-tunes starting, and it still ISN'T burning.
It would be really nice IF i-tunes would provide the correct file FOR the sony CRX160E drives.
Also, I can't seem to search in these forums, that would REALLY help.

QuickTime not found error when trying to run iTunes 64 bit on W7, QuickTime not found error when trying to run iTunes 64 bit on W7

I have quicktime installed on windows 7, 64 bit, and then installed the 64 bit version of iTunes. Install is successful, but when I try ot run iTunes, I get an error - "QuickTime was not found". Any suggestions?

I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.

Getting "HP imaging device not found" error when trying to use the scanner in mountain lion. Anyone else have this problem?

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

"CTAudEp.dll not found" Error When Trying To Launch Creative Consol Softeware!

I have pulled and reloaded the software drivers for my Titaniem PCI e titaniuXFi card, Model SB 0880. Downloaded straight from the sight here with no results. Anybody have some help here!
Thanks ahead of time for any help.... I have Windows 7 64 bit. The cards works actually but I cannot open the software program
DC

Marc Kubischta replied to you here http://forums.adobe.com/message/6338690#6338690.
There service is not down for everyone.

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Error when trying to Preview in CP7

A coworker is getting the following error when trying to preview a project in CP7. This project does not have any advanced actions but does have one system variable for slide number ($$cpinfoCurrentSlide$$) in a text box that runs for the project.
Here is the error message he is receiving.
Swf compilation failed.
Note: Please verify if any of the actionscript keywords is used as user variable name.
Thanks,
Susan
This project was built from a template but when I tested the template previewed fine.

Hi there,
Are you able to reproduce the issue consistantly with the project. Can you please ask your coworker to publish a blank project and see its working fine or not?. In case if the issue is project specific, then can you please send the .cptx file to us so that we can investigate the issue at our end. Please upload it to a shared workspace(Acrobat.com) and send me the link at [email protected]
Thanks,
Nimmy Sukumaran.

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
Cheers... Rick

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting File not found error when trying to preview in Captivate 8. Have used this before without an issue, so not sure why it's happening now.

Similar Messages

Maybe you are looking for