Getting films in colour on TV

Just bought a set of Apple wires to connect itouch to TV. Sound connection is fine but the film plays in black and white - no colour.
Can anybody point me in the right direction - much appreciated

Hello and Welcome to Apple Discussions.
Another thing to check is that in Settings > Video > that you have TV signal set to PAL rather than NTSC.
mrtotes

Similar Messages

When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?

When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?

Start here.

How do i get films onto my ipod touch?

how do i get films onto my ipod touch

Add them to your iTunes Movies library and then sync to iPod. Make sure the format is compatible with your iPod
Also see:
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

How to get the best colour representation on screen

Hi there,
I am trying to get my LCD to most accurately represent colours from my Pantone swatch book. I have a Huey Pro calibration tool to assist in the LCD calibration.
So, I've calibrated the display as best as I could. It's not a top of the line LCD and the Huey isn't the top of the line colourimeter so I understand that I won't get things absolutely perfect.
I'm starting with the basics: trying to match the C M Y & K from the swatch book. Figure that's a good place to begin. I'd like to see RGB and CMYK values look as accurate as possible on my display. If I can figure that out, then I guess it's time to understand how to match the Pantone values and the Lab settings and all that jazz.
My PS Colour Settings are North America General Purpose 2
RGB: sRGB IEC61966-2.1
CMYK: US Web Coated (SWOP) v2
Is there anything else I can be doing to get a better on-screen representation?
Is this Holy Grail even attainable with my modest setup?
I'd really value your advice and opinions!
Thanks!

Humm could be one of two things...
If the Display Resolution is off, go to: Apple > System Preferences > Displays > select the Display tab and choose the highest Scaled Resolution in the list.
If just the Desktop picture is to narrow, go to: Apple > System Preferences > Desktop & Screen Saver > select the Desktop tab and change the Fit to Screen setting to Fill Screen.
Likewise, I might complain to Verizon because those folks had no business messing with those setting.

I live in Switzerland and get films mainly in german, even if they are originally in english. how can I get them in english?

I live in Switzerland and mainly find films in german, even if the original is in english. How can I get, eg. Woody Allen films in english and not in german?

You need to go into the System/Language & Text preference pane and change the language for the whole computer to English.
Click to view full size
OT

Excel Charts do not get displayed correctly (colour) !urgent!

Hi,
believe me: I spent days in research to fix my problem but could not find a solution yet...
I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
still work fine (but on the other hand, all new web parts do not get displayed correctly...)
I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
Any ideas?
I do not use SharePoint Designer, just the browser version of 2010.
Thanks for your help!!!

Here is the code:
IANode QueryContractResultNode = wdContext.nodeA();
IBNode ToolTipNode = wdContext.nodeToolTipNode();
QueryContractResultNode.invalidate();
for(int i=0; i<searchContractListSize; i++)
   IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
IBElement newToolTipEl = ToolTipNode.createBElement();
if(newQueryContractResultEl.getParentName().length() >= 5)
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName().substring(0,4) + "...");
else
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
QueryContractResultNode.addElement(newQueryContractResultEl);
ToolTipNode.addElement(newToolTipEl);
Node A is bound to a model structure. Therefore, the value of A.parentName is set after the RFC execution.
Zita

Can i get more calendar colours for my ipad

is it possible to get more colours to assign to the calendars in ical. i have already used them all and now have multiples for most

No.

Hi - new to the forum. I am unable to get the true colour printing I am used to from my Canon Pixma 9500 mk2 since moving to a mac and using Aperture. The colours are simply not representative of the on-screen image. Any ideas?

Whatever I do with installing or de-installing printer drivers, selecting or deselecting colour synch or colour management options, the colour is simply awful compared to what I have been used to fir years, using the same printer with a pc and a 10 yeart old version of paintshop Pro. What is going on!??

First guess is that you are subjecting the data to two passes of printing conversions. If you use Aperture's color management for printing, you _must_ disable the color controls in your printer dialog.
How this is done varies for each printer. (The Aperture User Manual says, in full:
To turn off color management for your printer
Refer to the owner’s manual that came with your printer.
Additionally, make sure you have the most recent printer driver for your printer and OS. Printer makers have gotten good at making these files easy to get. Most now come with installation instructions.
Lastly, the only way to ensure that you get a good screen-to-print match is to use a hardware device to calibrate your monitor. That doesn't seem to be your problem, though.

How to get films bought in itunes via windows pc on my new iMac.

Locked into itunes on my new iMac I am only able to download music apps and books from my account. Previously I operated the account on an laptop with windows system. How to get the films downloaded on this device transfered to the iMac? Consequently to be captured via a TC. I always believed everything bought in itunes can be downloaded again. So for instance in case of a harddrive failure. If this is not the case, do I need to make backups.
Being a first time user here I am keen to expereince the community support here.
Big Thx in Advance and Regards

Find the movie file on your windows. This shouldn't be too hard. They are usually stored in /user/music/itunes/itunes music/
Drag the files onto an external disk.
Move the disk to your mac machine.
Copy the files off of the disk and onto your mac, then import them into itunes again.
Cheers!

How do I get films from iTunes on my mac to my ipad??

I am probably missing the obvious but would really appreciate some help! I have films downloaded on my mac in iTunes that I want to watch on my ipad when away from home. How do I do this?thanks!

When you sync you need to go to the movies Tab in Itunes on your mac and then physically select the movie that you would like added.
Tick or select it and then press apply.
The Ipad should then finish syncing and then eject it
The movies will not be found in Itunes on the IPAD but in the Videos folder that is normally on the 1st page of icons on the ipad.
It may be worth looking in the videos folder 1st before going through the motions again
Let me know how you get on

How to get rid of colour spinning wheel on imac

When I open safari coloured spinning wheel appears and locks up safari, I have to force quit to get out. It also appears briefly when other programmes are opened but doesn't seem to affect them.
What is the cause and how can it be solved ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to improve or get the right colours for my printer

Hey guys, I have just used an EyeOne to configurate the right colours of my screen. Just that when I use Photoshop or I watch at the pictures, I want to see them as they really are. I've done it, but now I have the second problem. It works for sending pictures, for sending them to print... But my printer(an Epson) prints them too dark and too redish.... But my screen is just perfect.
Do you know how can I manage to configurate the way to change the colours of my printer with some app or some configurator??
Thank you very much for your answers.

Your EyeOne has calibrated the display, but you will also need print profiles.
First, without a printer profile, you will get the most accurate print by using the printer manufacturers, in you case Epson, inks and papers.
You can use alternative, but quality inks, and alternative quality papers. Wether using these or Epsons, you will need a print profile.
The print profile will usually make a much larger difference than just calibrating your display.You will need a different profile for each paper and ink combination you use. Some paper manufacturers supply downloadable profiles, but these will only be accurate if all of the Epson printers of your model have identical characteristics, this is rare, hence the need for custom profiles. Some paper manufacturers will supply you with a custom profile free, or you simply download the target image, print following their instructions precisley and post the printed target to them for a custom profile. They then email the profile back to you. There are also commercial companies that do this to. Another option is to purchase a calibrator that profiles your display and printer, but that tends to be expensive. Look here at various options here from just one of many suppliers http://spyder.datacolor.com/products.php.
Look here for options available from a typical paper supplier in the UK. http://www.permajet.com/30/ICC_Profiles.html. Then read these sections relating to the previous link.
What are ICC Profiles and why do I need them? CLICK HERE
What is the difference between a GENERIC and a CUSTOM ICC Profile? CLICK HERE
That should give you and idea of what needs undertaking for print colour accuracy.

How can I get films purchased from the iTunes store to work on my new iPod classic?

I have recently purchased a new iPod classic, everything works accept it will not play films. At first I thought it was a problem with the films I was trying to put on as they were from my computer; but after purchasing some films from iTunes it still keeps saying that they cannot be played on this device. Please help as I have spent money on films I otherwise cannot watch.
Any advice is welcome.

Hey Shelly29,
It sounds like you might be trying to sync HD videos to your iPod classic.
HD videos purchased from the iTunes Store are compatible with iPhone 4 or later, iPad, iPod touch (4th generation or later), Apple TV, and computers. You may need to download your purchased video from iTunes in the Cloud in a lower resolution for your device.
You'll want to check out the following article to resolve the issue, specifically the "Download previously purchased content in a lower resolution" section:
iTunes: Sync purchased HD videos to iPod or iOS device
http://support.apple.com/kb/TS4223
Have a great day,
Delgadoh

Fade to Black: Getting a weird colour distortion.

Question for the gurus:
I'm on CS3 at the moment and working on some projects involving space scenes (stars and stuff).
I have a black rectangle as my bottom-most layer and change the fill to a simple black and white radial gradient effect and the black becomes kind of faded, or pale. I'm losing my mind trying to eliminate the problem and what's worse is that I've fixed the problem during a previous project, but can't for the life of me remember what I did.
Any ideas what's causing this and how to avoid it in the future?
Much appreciation for taking the time to read this!

The problem is solved. I don't know what caused it in the first place. However, when I change the colour from the faded black to another (i.e. red) and then back to black the colour is just fine.
Weird.
Thanks for looking in and trying to help!

How can I get rid of the transparency in the Tab bar and get a solid colour

I have upgraded to Firefox 4 and because the menu bars were 'ugly' put in a persona.
Now I find that the Tab bar is transparent, which makes it hard to read.
How can I change the Tab bar to a solid colour and still keep the persona.
And if there is a solution can it please be put into simple terms for someone who only has a bit of computer skill.
thanks :)

You can try a solid persona.
*Solid Gallery: http://www.getpersonas.com/en-US/gallery/Solid

Getting films in colour on TV

Similar Messages

Maybe you are looking for