Getting final cut projects to a dvd?

I need help with getting my final cut projects to a dvd. Any help would be appreciated.

I would export to a quicktime movie and then use that in iDVD.

Similar Messages

How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                    "Configuration error
                       This software requires certain hardware or software which is missing
                                * AGP graphics Card"
If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
On the same note I also have DVD studio Pro 2 and that just quits without any message.
Hope any of you can be some help.
Thank you,
Doug

This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
I have tried to burn from the share dropdown menu ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
thanks salty777

Trouble getting Final Cut edited video to DVD

So here's the background.. I had some old VHS videos that I wanted to edit and put on DVD for storage/easier viewing if the desire hit me. So it's been months and i'm still laboring over this stupid project finding the best work flow.
After struggling with iDVD, compressor (3 days to convert a 3 hr video, seriously?), DVD Studio Pro and other options I decided to forget the fancy menus and just export the **** thing. Quality isn't my main concern so I figured put it in VisualHub and convert to DVD. This worked fine for VHS Tape 1 but now I'm trying it to do it VHS Tape 2 and for some reason everytime it gets to a certain point, it hangs forever. Now initially I thought this was VisualHub, so I did a test conversion in Handbrake to find it hang in the same place. I then decided, I'd re-export my video from FCP as something must be wrong with the original export mp4 file. I exported from FCP again and tried VisualHub again, again hangs at the same time. I then inspected the video file and pinpointed the spot where VH stops converting, except it plays fine from the original exported mp4. I then checked in FCP to see if perhaps there was something in the timeline to cause this hitch, again no sign of trouble. I tried various formats for converting and the same thing happens over and over.
To make a very long story short, does anyone know why a video file would be hanging VH and any other program that tries to convert it in the same spot? Can anyone suggest a quick/easy workflow for FCP to DVD format. I'm working on my Macbook Pro so it's frustrating tying up my laptop for hours on end

I wasn't notified that there were replies to this so sorry for the delay. Thanks so much for the suggestions. The videos were captured with EyeTV; I'm pretty sure they have their own file type but not sure what actual encoding they use. At any rate, I can export to a variety of formats from there.
In my trials I had tried exporting both self-contained and not.. and while I usually didn't use Recompress All Frames, I did try it once and it didn't prove helpful.
I've tried compressor again and I got it to output, but I'm still trying to work out how to get it to come together in DVD-SP. I've used it before but never with separate audio & video files. I'd say I just need to sit down when I have some time to toy around.
As for option 2, I tried iDVD as my first option way way back when I started editing these but as the video files are fairly long, they weren't fitting on a standard dvd and as I don't have a dual-layer burner it wouldn't let me burn or save as a disc image, saying I needed to cut down the file which is not what I wanted to do. I did at one point try cutting the video in half, even then though the conversion process took 24+ hours which I'm not sure why.
Thanks for the suggestions. I know the MPEG-4 conversion makes no sense but it was sort of my last ditch effort to get something working. Quality of the video wasn't my main concern as it's already a low quality tv rip. Obviously I'd rather not make it worse, but I traded quality for expediency and it actually working.
Thanks again!

Can i get Final Cut Pro X on dvd ?

Hey All,
I am planning to open a Studio and would like ot have 16 nos of FCP X. Just had a doubt if i can get the software on FCP X DVD from Apple?
If some one has got this on DVD kindly inform.
Regards
Bhavik Meghani

Just copy it onto a USB drive or from machine to machine. There is no DVD, but you can put it on one if you want. There is no installer.

Exporting final cut project

I would appreciate assistance in exporting a final cut project to a dvd to be edited on another computer equiped with final cut by someone else.

First determine if the other person has a version of FCP that will open the project file you'll be providing. If not, you may have to export the project as an XML file.
Next you will ALL video and audio clips as well as any other media that the project contains (LiveType files, Motion files, SoundTrack Pro files, Photoshop files, etc). Unless your project is very, very small, I doubt that all the needed media would fit on one DVD (4.3gb of usable space). You may need to put everything on an external hard drive to deliver it.
I wouldn't worry about transferring any render files. The other person can re-render.
-DH

Final Cut Project file has become bloated

My Final Cut Project file seems to be growing at an exponential level. It jumped from 160mb to 367mb after I DELETED a bunch of files to try & reduce the size. The problem is getting serious. I try & "save as" or create a new project and drag my essentials into a new project, but then I just get the spinning beach ball. Any ideas? My sequence is only about 10 minutes long, working in ProRes422 Proxy files. Thanks!

Are those figures meant to be Megabytes because most of my projects of around 10 minutes are in the region of 5MB which is roughly equivalent to one JPEG photograph.
Is it actually the FCP Project file or some of the media or render files associated with it?
Are these the type of files you are referring to?
Could you post a screenshot showing the file and its size etc.
Is your problem just a fear of its "size" or has your computer ground to a halt?
How much free space is on your computer's hard drive?

Intel and PowerPC Final Cut project compatibility

I have two computers, a laptop and a desktop, that I use with Final Cut Studio. Both run PowerPC chips. If I purchase a new computer with the Intel chipset, will Final Cut projects be able to go back and forth between the Intel and PowerPC computers? I spend quite a bit of time editing on the road with my laptop then get back to the office and copy the project file over to my office computer. When going back on the road, I copy the project file from my office computer and put it back on my laptop so I can keep editing while traveling.
Thanks!

There is no compatibility issue between PowerPC and Intel as far as Final Cut Pro is concerned. You just have to make sure you have the same version of Final Cut on all machines, because older versions of Final Cut Pro will not open files created in newer versions. You don't have to worry about the processor.

HT201109 Why can't I open a final cut project from one computer in another computer?

I'm using Final Cut Pro Trial. Why can't I open a final cut project from one computer in another computer? When I try to open the project on my desktop it doesn't recognize the format. Please help!

I downloaded FCPX trial on my laptop as well as on my desktop. I did some editing on my laptop but I need to get the project I created on my laptop onto my desktop. When I import the project onto my desktop the videos are Red and they say "Missing File."

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

Problems Searching metadata in a Final Cut Project Uploaded to FCS

We had an intern go through some footage that was on our FCS and load it into a Final Cut Pro project. He then went through and cut up the footage, made it an Independent Clip in Final Cut, and then Renamed the clip. He created multiple clips in Final Cut which all link back to the big master clip which is in Final Cut Server.
I then just uploaded the Final Cut Project which then created elements for all of the independent clips that were made in Final Cut. Upon closer inspection of the Final Cut Project in FCS, I noticed that in the elements of that project, it created all of the clips that we made independent. Great....almost. Two problems arose. All of the proxy files for those elements all have the same thumbnail based on the master clip, but do have the In/Out points when looking at the proxy file. Can you get the proxy file just to encode the In/Out points and make appropriate thumbnails?
Problem 2:
With these elements, when I perform a search with the exact filename of the element in the Final Cut project, it will only show me the Final Cut project. I have to open up that Final Cut project and then look into the Elements Folder of that project. Is there a way to search elements of a Final Cut project where the elements are reference files or metadata of a master clip within Final Cut Server?
If this doesn't make sense, I'll try and re-explain.

Yes, I did, but it doesn't show the element only the project and the master clip. In order to actually find it, I have to double-click the found Final Cut Project and then look into the elements tab. I'm trying now to figure out a way to make a custom lookup in the advanced search parameters that would allow me to only search Elements of a Final Cut Pro Project.

Can't get Final Cut to recognize my camera.

I have a Canon VIXIA HF11 High def video camera and I can't get Final Cut Pro to recognize it. I don't have a firewire connection on the camera. It is a USB 2.0. I assume this is the root of the problem. iMovie recognizes the camera and imports the files. Does anyone know of a way to get the files into Final Cut? Thanks!

Might I suggest a training DVD
http://www.classondemand.net/media/final-cut-training/fcp7.aspx
This is an AVCHD camera. You need to use the log and transfer function with the correct settings. You should not use iMovie for capture as it captures in an older codec that's not very good. In FCP7 you can capture in ProRes or ProRes LT, both of which are superior.
I stand to profit from this message.

How to add music to final cut project

Hi I wanted to know is it possible to add music to a final cut project from an existing cd or even from itunes? If so how? Thanks

Just drag whatever sound file you want to use to FCP. It will automatically convert it to what it needs.
Uh, QUITE wrong. Wrong wrong wrong. Avid does that, NOT FCP.
#5 Imported music from CD or iTunes
Shane's Stock Answer #5: Importing music from CD or iTunes
To get music into FCP, it needs to be an AIFF file at 48khz, 16 bit stereo. So if you want a song from a CD, you go into the iTunes Preferences, click on ADVANCED and set this up under the IMPORTING tab:
AIFF
Sample Rate - 48.000 kHz
Sample size - 16 bit
Channels - Stereo
If you have an mp3 that you want to use, then you can convert it thru iTunes as well. As long as this is chosen as your import option, when you select a clip and click on the ADVANCED menu, CONVERT TO AIFF will be an option.
If the piece of music you want to use is something you purchased thru iTunes, I'm afraid I can't help you there. There are copywrite issues that prevent files from being converted into the format that FCP can recognize.
Shane

Hi, a "General error"appears on my Final Cut Project when I try to save it. I read in this Community that the solution could be save on the desktop. It works, but how could I solve it in my External HD?

Hi, a "General error"appears on my Final Cut Project when I try to save it. I read in this Community that the solution could be save on the desktop. It works, but how could I solve it in my External HD?

Is the external formatted to Mac OS Extended?
Right click the external icon on the Desktop and select Get Info.
This will tell you the current format.
Al

TS2521 How can I get Final Cut Pro 7?

I would like to get Final Cut Pro 7. Is this possible? If so, does the Studio version have motion, etc.?

Motion and Compressor are separate.
And know, that FCP-X is unlike FCP 7 in just about every way possible. The way it works is vastly different. And you cannot open FCP 7 or 6 projects in it without buying a 3rd party converter.
Now, I hear many people like it...I just wanted you to know that it is VERY different from FCP 7

Getting final cut projects to a dvd?

Similar Messages

Maybe you are looking for