Getting forced shutdown when connected to Adapter

I have a Toshiba laptop. it is working fine on batteries but when i connect it to power cord, a bluish/black screen appears after 2 3 mins......when the laptop is off, battery is getting charged up normally....any solutions??

Try with FM RFC_SYSTEM_INFO on the destination SAPGUI.
    call function 'RFC_SYSTEM_INFO' destination 'SAPGUI'
      IMPORTING
        rfcsi_export = ls_rfcsi.
Regards,
Naimesh Patel

Similar Messages

  • M70 freezes when connecting AC Adapter after low battery warning

    When I get the low battery warning, I connect the AC adapter but when I switch the power on, the laptop screen goes blank. The DC in LED lights up, the Power LED stays on and the Battery LED comes on but I cannot use any keys on the keyboard, the laptop has frozen. Any ideas?

    Does this happen when you connect the small plug directly to your laptop or the mains plug?
    I noticed similar problems (usually shutdown) when connecting/disconnecting the mains plug. This does not occur when the power adaptor is plugged in and I plug the power connector at the laptop in/out. I guess there is a problem with the transient behaviour of the power adaptor & the power detection in the laptop.
    This applies to Satellite M60. I recall no similar issues with an older Sat 3000.

  • OS X Lion gets kernel panic when connecting via CIFS

    A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
    Any new on this issue?
    Tycho Sjgren
    Apoio AB

    Originally Posted by tychosjogren
    Sorry for the late response - had to check a few things with the customer.
    They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
    This is how the problem occurs:
    1. Mount the CIFS share - no problems
    2. Use the share - no problems
    3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
    So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
    Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
    I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
    HTH.

  • 2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
    On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

  • Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my macbook Pro.

    Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my Macbook Pro.  I have turned off Bluetooth ( which was not an issue previously), uninstalled Chrome, again not an issue before I upgraded, and have not seen any improvement.
    I was using an older OS system (Snow Leopard) on my 2010 Macbook Pro.  I am wondering now if the upgrade was an unwise move?

    jbuckworth,
    which apps do you run under battery power? Are any of them identified as “apps using significant energy” when you click on the battery icon in the menu bar? If you have a 15-inch or 17-inch model, are your apps using the discrete GPU (which consumes more power than the integrated GPU)?
    How many charge cycles has your battery accumulated?
    How long have you had Mavericks installed? Is Spotlight still reïndexing your boot drive? (It does that whenever your OS is upgraded, because so many files change in an OS upgrade.)

  • Keep getting carrier update when connecting my new iPad to Itunes

    keep getting carrier update when connecting my new iPad to Itunes even though I have updated it I am with o2

    iTunes - Error codes and messages - http://support.apple.com/kb/TS3694.

  • Why am I getting sound distortion when connecting iPad 2 to amplifier.

    I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.

    It sounds like a mismatched impedence.  What are you connecting to?   the output from the jack is intended for headphones, and is not just an audio out.
    Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
    There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it.  I would bet they are available if you google.  Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
    Try google for a 31 pin cable.  ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • T60 shutdown when connect to the docking

    Hello,
    I have several T60 in my company,
    3 of the T60 (one is T61) shutdown when connecting to the mini docking.
    This is new.
    I have the most BIOS and driver updated.
    Also I know this http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67382
    and I already have that

    Hi,
    Can you please check your RDS configuration from Windows->Preferences->RDS Configuration?
    Please send a snapshot of your RDS configuration and attach your web.xml for us to investigate
    Thanks,
    Balaji

  • I keep getting this error when connecting my phone (0xE8000001)

    I keep getting this error when connecting my phone (0xE8000001) to iTunes. Sometimes the phone will try and sync for a little bit then it disconnects. What gives?
    And yes, I do have the latest version of iTunes (7.3)

    i kept getting all the same errors and i just figured it out. after getting an iphone i went from pure excitment to anger as i plugged it in and realized i needed to upgrade to tiger. then i spent over an hour installing tiger and it still didnt work. i got the same itunes error of not recognizing. HERE IS THE FIX....TURN OFF THE IPHONE AND REMOVE FROM THE DOCK. DONT JUST PUT IT TO SLEEP, HOLD DOWN THE BUTTON UNTIL IT ASKS YOU TO SLIDE TO TURN OFF. THEN CLOSE ITUNES. NEXT TURN THE PHONE BACK ON BY RE-DOCKING. START UP ITUNES IF IT DOESNT START IMMEDIATELY. YOU SHOULD START HAVING FUN NOW, ALBEIT SLOW ON THE 1.1 USB.

  • Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Since the last update for my Iphone 4s i dont get text messages when connected to wifi. my wife is getting them. Imessage is switched off on both phones.

    since the 6. version update. of my Iphone 4s My wife was getting my text messages. I found the problem was caused by Imessage when connected to Wifi. I deactivated Imessage on both phones to solve the problem. I now have updated my Iphone to 6.1.1 and i dont get text messages anymore. I have Imessage deactivated on my phone but my wife is getting my text messages again. my wifes phone was not updated to 6.1.1 because the last update lost all her contacts from her phone and we had to but them back in one by one from the outlook list. Her contact are listed in outlook on a seperate list to mine but we can only get my contacts download to her phone. We use the same laptop to sysc phones.
    My Iphone does not download photos to My Pictures anymore. I have to copy them across to a folder. I cant find where it backs them up to.
    I have lost all confidence in Apple now as i was forced to update to 6.1.1 because of 3G reception issues and not reciving calls and now back to spending several hours trying to fix my phone to recieve a basic text message.

    Are you and your wife sharing apple id?
    If you are that is the reason why she is seeing your imessage.
    On both phone go to settings - message - send&receive - make sure the cell is the default.
    You will have to uncheck or remove the apple id.

  • HP Photosmart D110 Series getting error message when connecting to web services

    Hello guys!
    Hope someone can help. We have a HP Photosmart D110 series that is a couple years old. I am trying to get it connected to the web services feature for my wife. When we first got the printer it connected with no problems. When I go and click on enable web services it tells me cannot connect to server. Same error message happens when I try to do a product update. I tried to change manual preferred to 8. 8. 8. 8. and manual alternate to 8. 8. 4. 4. with no luck. 
    Any help would be greatly appreciated!
    Thanks!!!
    Daniel

    Hi Daniel, is there a chance that something has change in the intervening time in your home network e.g. a new router? This link contains a list of suggested troubleshooting steps to take if you're experiencing connectivity issues with HP Cloud Services. Try working down through them to isolate and correct the problem that is preventing you getting the D110 to connect to ePrint http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
    Post back with how you get on.
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Hard drive gets error -50 when connected internally, but not in USB enclosure.

    I have a SATA hard drive that works perfectly when connected through an external USB enclosure but whenever it's plugged into the internal SATA connector on my MacBook Pro I receive the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." any time I attempt to move or copy a file to it.
    This doesn't happen with any other hard drive I connect internally, so I don't believe it's an issue with the internal cable.
    I have made sure all permissions are set to allow reading and writing to the drive as well as selecting the "Ignore ownership on this volume" option in the Get Info panel.

    If I were you, I would just replace the drive. Since other drives work, you're probably right in assuming that it's not a SATA cable issue, but rather an issue with that specific drive.
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • I can't shutdown the computer without using force shutdown when firefox is active

    Firefox prevents my computer from shutting down. I have to use "Force shutdown".
    In case I am canceling the shutdown, Firefox freezes and then crashes.

    Hello,
    I second this. Programs should close gracefully when asked by windows during a system shutdown. Firefox crashes instead. This happens with full version 4 also, not just beta.
    When asking Firefox to close after initiating a shutdown (and it not happening), you find that it has crashed, become unresponsive, and one must close it thru the task manager.
    I hope this is fixed in an update soon! Firefox 4 looks to be the best yet!

Maybe you are looking for