Getting frustrated with this "error" message

Hi guys, I'm your sterotypical chick here, so fixing computer problems just isn't my thing. I have read several different topics on here regarding my problem. First off when I start itunes it says "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I have uninstalled and reinstalled this a couple of times. Then I came on here and reinstalled QT like you guys said, and that works fine for me. I then did something on one of the other threads that said to go into my documents and settings, and then change my file names itunes.pref1, intunes.prefxml1, ect ect. There is still a problem. I tried seeing if I could get it to work on a different user account and when it started to install and load itunes on that account, it just froze the whole thing up. I'm frustrated and angry that I downloaded this new version, I should have just kept the one I had on there! So someone, please help me out here

For the -200 try this thread
http://discussions.apple.com/thread.jspa?threadID=677133&tstart=0

Similar Messages

  • I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I've just seen this message for the first time and it's showing on 10 devices.
    What I really love about Apple Configurator is the copious amount of context driven help offered to you.
    "Unable to send ClearPasscode command to device.
    The device was disconnected.
    Check the USB connection to the device."

  • I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

    I am having trouble installing lightroom 5 with this error message:
    Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
    what should I do? Billmeb

    Hi BillMeb,
    Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
    Regards,
    Romit Sinha

  • I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again.  What should I do?

    I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again.  What should I do?

    JPPI-
    Did you try it with the iTunes your Mac already has?
    Try running Software Update in your System Preferences.  That should bring your computer up to the latest software available for 10.4.  You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
    Fred

  • Can anybody help me with this error message I keep getting

    When I try to export my document as a pdf I keep getting this error message...  "The document “Client Invoice_TMC copy” could not be exported as...."

    What version of Numbers?What version of Mac OS X?
    Have you tried restarting Numbers?
    Have you tried restarting your computer?
    Can you export other documents to pdf?
    Have you tried printing the docmment to pdf using the built-in print dialog?  To do this select the menu item "File > Print", then click the print button, then select the "Open in Preview" select from the PDF button in the bottom left corner:

  • I need help with this error message "seek encountered an internal error"

    I wonder if anyone can help me with a Captivate issue: I just upgraded to 5.5 - when I try to insert a video slide I get an error "seek encountered an internal error". The video is a 35.3 MB flv file.
    This is a prroject that I have been working on for months and need to switch the video on the slide to an updated video - so I try to delete the video slide that is there and insert a new slide but when browse for the new video file I want to use, I keep getting this error message.

    Try <fx:XML>

  • What should I do with this error message:

    Two days ago I opened Photoshop Elements 7 and received this error message:
    There is no disk in the drive.  Please insert a disk into drive \Device\Hard disk5\DR5
    I have uninstalled and reinstalled and updated.  Restarted the computer and I still get the same message.
    Please someone help!  I use this program often.  Thanks.

    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • Can anyone help me with this error message? I have run a permissions repair but it didn't solve the problem.

    No permissions to write to /System/Library/Frameworks/JavaVM.framework/Versions/A/Commands/Home/lib/ext
    This is the error message I get when trying to update a 3D viewer plugin for the IMAGE J (FIJI) software. This is a brand new system running Mountain Lion 10.8.2. has anyone else gotten this error message, and could you give me any advice?
    Thanks
    Leah

    You need root privileges to modify that system folder. Actually, it shouldn't be modified at all, except by Apple. Whatever installer you're using is defective.

  • Why the modem deconncts frequently with this error message, "You were disconnected by the PPP server. Try reconnecting."? Please, help me out.

    Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
    Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!

    Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
    Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
    Haven't found any info to assist us
    Hope someone comes forward soon
    Thanks and good luck !

  • Please help me with this error message

    when I try to restore/update my iPod I get this error message:
    "There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
    Make sure your network settings are correct and your netwrok conection is active, or try again later."

    when I try to restore/update my iPod I get this error message:
    "There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
    Make sure your network settings are correct and your netwrok conection is active, or try again later."

  • Need Help with this Error message in App World

    hi, i just install the new version of app world. when i try to open my world or my account, i got this error message "THERE IS AN ISSUE WITH THE CURRENT SESSION. PLEASE LOGIN TO CONTINUE. (Error Id: 30702).
    when i press Ok..nothing happen at all..anyone please help..i already try install the previous version app world but still the same.

    Hello azain
    Welcome to the Community
    Please check the Article below to help you solve the issue.
    "Unable to login to your BlackBerry ID account" or "Unable to update your BlackBerry ID account info...
    Goodluck and please let us know if it helps you
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • ISync fails - what to do with this error message?

    I set my iMac to autosync everyday at a certain time. I realized that the last sync was 7/27/06, and when I go to Sync tab in the .Mac system preferences, I get the following ".Mac Sync Error" message exactly as follows:
    "* -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0)"
    Any idea of what sync fails? and what I need to do ?
    Thanks!

    With the release of Mac OS X 10.4 more than a year ago, iSync no longer has anything to do with the synchronization of contacts, calendars and tasks with .Mac - that is the responsibility of .Mac Sync. You should probably post you query in the .Mac Sync forum, here:
    http://discussions.apple.com/forum.jspa?forumID=957
    You may be able to deal with the error message by resetting the Sync Services framework—its truth database, actually—by launching iSync, opening the Preferences… dialog, and pressing the Reset Sync History button. That will leave your data intact and your sync clients registered, but reset the truth database and framework to behave in such a way that your next synchronization event will appear to be the first event you have ever performed.
    The 'incomprehensible archive' the error message refers to is likely on your Macintosh.
    Before proceeding further, back up your contact and calendar files using the built in provision to do so in both the Address Book and iCal. If resetting the database does not correct your issue, you can launch System Preferences, open the .Mac pane and press the Advanced tab. In the lower left corner is a Reset Sync History button. Press that, and in the dialog which appears, configure .Mac to overwrite the data files for one OS X application on your machine at a time, starting with contacts. Make sure that you overwrite your computer data [which you have just backed up, and can therefore restore if that is necessary] with the data from .Mac.

  • What do I do with this error message: To use this library, make sure its file permissions are set correctly.

    So I cannot even access the application. It was working fine yesterday and today I get this error message:
    To use this library, make sure its file permissions are set correctly.
    I have changed nothing. All the pictures are there on the computer. Help?!

    Reboot.  Close any programs which open at start-up.  Run Disk Utility (you can type this in the Spotlight search field at the right end of your Menubar).
    In Disk Utility, select your drive from the list on the left, and click "Repair Disk Permissions".  This will take a few minutes, but should be less than ten.
    Reboot.
    Try to open your Library in Aperture.  What happens?

  • What do I do with this error message Component returned failure code: 0x8050000e (NS_ERROR_ILLEGAL_INPUT) [nsIConverterInputStream.readString]?

    I am trying to do a mail merge.
    I downloaded the add on and finally got it enabled.
    So under file Mail Merge is an option and I get through all of it, but then I get this error message every time.
    How do I fix it?

    you contact the add-on author and ask him... there is an email address on the add-on download page.

Maybe you are looking for

  • Airport extreme (gigabit ethernet) b/g not working

    I have an airport extreme (gigabit ethernet)  that I use as my base in an extended network. I Have always had it in Wireless N mode with b/g compatability. the other day my speeds went from being super fast and happy to less than 1mbps. I went and pl

  • Can't get iCloud to open any of it features

    iCloud will not open any features. Message says long running script.

  • Printer profiles LR & PSCS2

    On my Vista x64 desktop , profiles for my Epson R2400 printer which have been loaded do not appear in either LR nor PSCS2. Other profiles, default PSCS and others I have loaded are present. HELP!!!!!

  • Keyboard and characters unique problem IN all programs

    Hello, thank you reading I have a unique problem with my computer. I have searched a great deal to locate information on my issue with no luck. It is very hard to describe the problem and I figured asking here might be the best idea. I have all the l

  • Flash 8 button trouble

    I am still trying to figure out a problem I am having. Have a grid with 12 movieclip buttons, when clicked a button changes color, displays a message.  This message contains another button "for more information click here".  I have it pointed to a fr