Getting Full rez out to the Broadcast Monitor via Aja IO Express?

New user of Speedgrade. I have an Aja IO Express connecting to a reference monitor, I am direct linking from a Premiere Pro Timeline and everything looks fine on the timeline and reference monitor through the Aja IO Express in PrePro.
I have Mercury Transmit enabled in Speedgrade per the Adobe set up procedure.
My source material is 1920x1080, yet the display on my reference monitor looks soft and low rez.
In Speedgrade, I notice that the frame sized is displayed as 960 x 540 and am wondering if that is the problem. I can't find a way to change that setting.
Any help appreciated.
MtD

Ah, that was it - the dynamic quality settings were reduced.
Thanks!
MtD

Similar Messages

How do you get your iphone out of the connect to itunes screen?

How do you get your iphone out of the connect to itunes screen?

What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

How can i get HD video out from the lumia 900. ? ...

How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?

I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
The two cars I have are an Audi and a BMW and both have manufacturer connectors

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

You can store your iTunes library on a Time Capsule. So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).
If you do decide to put your libray on Time Capsule I'd recommend doing this.
Option 1:
1. Don't use TC as a Backup (Time Machine).
2. Connect a USB drive to your TC or Computer and backup to the drive. Backup when a change is made to the library (adding Apps, Songs you get the idea).
Option 2: (What Im doing)
1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
2.   Use TC1 as a Time Machine backup
3.   Use TC2 as network drive. (The information on TC2 does NOT get backed up to TC1).
3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD. I've been doing the or some time now. Or connect to your TC and do an archive.
I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection. It's expensive, but does exactly what I expect.
The most important thing is to safe guard your data in case of a failure.
In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM. What ever you decide to do make sure you have a GOOD duplicate (backup).

How can i get my email out of the file box icon?

How can I get my email out of the file box icon? Sometimes I touch it by accident and the email message goes in there.

Another thing to try is renaming it with a .htm or .html extension.
If that doesn't work either, do you have any other files from your old system? In particular, if you have your old places.sqlite file, you could use that to overwrite your new places.sqlite (bookmarks+history) file.

How do I get my songs out of the cloud? Seems like there are issues and won"t let me sync..

How can I get my songs out of the cloud? Seems like there are issues, any new purchased songs are not syncing with Ipod 3rd generations.

Do you have the original installation disc(s) that shipped with your MacBook? You're just going to have to start from scratch - as I doubt that you can recover any files without paying a fortune. Insert the installations disc, reformat your hard drive and then install the OS that came with your computer. Continue updating to 10.6.8 and then redownload and reinstall Mountain Lion again.
That's really the only way you're going to get your machine up and running again. I would also consider buying an inexpensive external drive to use as a backup in case your brother decides to do something stupid again.
Clinton

Light room five keeps crashing my computer uninstalled it downloaded a fresh copy it works fine how do I get my pictures out of the old copy to the new one?

Light room five keeps crashing my computer, uninstalled it downloaded a fresh copy it works fine. How do I get my pictures out of the old copy to the new one?

Apparently you have two catalogs now, one from each installation. If you did importing, tagging and editing during the first installation, that will all be in the first catalog. Find the first catalog - it is a file with the suffix .lrcat and the default place for LR to put it is usually your Pictures folder - and (with LR closed) double-click on it. LR will launch with catalog #1 active.

How do i get my podcasts out of the cloud and into my ipod? I currently have about 30 podcasts on itunes but only about 5 in my ipod.

how do i get my podcasts out of the cloud and into my ipod? I currently have about 30 podcasts on itunes but only about 5 in my ipod. The ones listed as being in the clould will play on itunes but I cant get them into my ipod.

Either sync them via iTunes on the computer to the device or turn on Podcast syncing in Settings > Podcasts on the device.
This is covered in the User's Guide, try reading it for a better understanding of how the device works.

How do I get LR to open on the secondary monitor in a two monitor iMac Retina system using Yosemite?

No matter what settings I use in Mission Control or in TotalSpaces2, LR (latest version) keeps opening on the main screen and I have to move it to the secondary monitor each time I restart it or change catalogs. It is irritating but also problematic in that LR seems to get lost on occasion when I use the main monitor for full sized images and will seemingly randomly put the full frame image on top of the main LR grid and control screens (on the secondary monitor) which forces me to close LR to get back to normal. So far I haven't been able to figure out any sequence that causes this to happen but there probably is one.
I have:
1. Tried with the possible combinations of "Displays have separate spaces" and Spaces assignments available by right clicking the program's icon in the Dock.
2. Lowering the position of the secondary monitor in Display Arrangements (a strange suggestion via the Internet)
3. Very politely asking LR to behave like all of the other programs.
Any suggestions.

Exactly what Bob Levine said. Can confirm, running a two monitor display here.

How can I get an item that has the broadcast icon next to it into MP3 format so I can put it on my ipod nano?

Question: how can I get an item in my itunes library, on my mac os 10.6.7 that has a broadcast icon next to it into MP3 format so I can play it on my ipod? right now it won't let me, and it's very frustrating!!!! thanks

I might have misunderstood what you mean by the "broadcast icon," but if you are talking about an audio stream, then there is just no way you can convert a stream to MP3. What this would involve is either recording the stream, and then you would just be replaying the recorded audio on your iPod (is this what you are trying to achieve?), or reading the stream directly on your iPod, which an iPod nano does not support (it would need wireless connectivity).
Hope this helps

HT1766 How can I get a photo out of the iPhone camera roll to use in an email or another program

I have photos of my car that I took with my iPhone. I'd like to use them for an advertisement to sell the car. How do I get them off the phone or out of the backup folder that iTunes produces when I back up my phone. I'm using a Windows 7 computer.

Thanks, but I figured it out. I just had to find the files in Windows under what would be considered a "drive." Once there, the photos all show up in a folder as JPEG files. Got the ones I needed.

How can I get settings files out of the Library folder?

I had to do a clean reinstall (erase & reinstall) to clear up some problems on my Mac. Unfortunately, when you do this, your settings, customizations, bookmarks etc. aren't transferred over as they do when you upgrade in the normal way.
For example, dashboard widgets are in each user's <home folder>/Library/Widgets folder.
I could restore some of these settings by dragging the settings files from the old System Folder to the new one. Unfortunately, Apple is making this harder by hiding the Library folder in the user folder, both on the Mac and on the backup drive.
There is a command to enter in Terminal to show your Library folder, but this only seemed to work on the Mac and not on my backup drive.
How can I get key settings files out of the Library folder on my backup drive when the Library folder is hidden?
Thanks

Open the enclosing folder, choose Go to Folder from the Finder's Go menu, and provide Library as the path.
(80699)

HT6147 Every since. Upgraded to ios 701 my wifi signal is weak or lost I used to get a signal out in the back yard but not anymore

I updated to ios 7 now my wifi strength is low or gone I use to sit out on the back patio browsing the internet now I can't even get a signal in the next room in the house very disappointed

Hello, Olielettef.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Getting Full rez out to the Broadcast Monitor via Aja IO Express?

Similar Messages

Maybe you are looking for