Getting gnome to run from command line and over VNC

Hi, I just got to the part of the Beginners guide, dealing with gnome and for some reason
$ startx
didn't give me a gnome desktop, X same with
$ xinit
but
$ xinit /usr/bin/gnome-session
worked and gave me a desktop. From the gnome guide
$ gnome-session
generated the following error
** (gnome-session:4591): WARNING **: Cannot open display:
Anyone know why I am getting these errors?
VNC
my xstartup used to look like
#!/bin/sh
vncconfig -iconic &
unset SESSION_MANAGER
unset DBUS_SESSION_BUS_ADDRESS
OS=`uname -s`
if [ $OS = 'Linux' ]; then
case "$WINDOWMANAGER" in
*gnome*)
if [ -e /etc/SuSE-release ]; then
PATH=$PATH:/opt/gnome/bin
export PATH
fi
esac
fi
if [ -x /etc/X11/xinit/xinitrc ]; then
exec /etc/X11/xinit/xinitrc
fi
if [ -f /etc/X11/xinit/xinitrc ]; then
exec sh /etc/X11/xinit/xinitrc
fi
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
with exec gnome-session added in, it still gave me a x desktop. Now it looks like
#!/bin/sh
autocutsel -fork
export XKL_XMODMAP_DISABLE=1
exec gnome-session
and works. Am I missing out on anything by omitting the old stuff? Any suggestions? Also if my inittab looks like this
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >/dev/null 2>&1
# End of file
Do I need to worry about the login security hole?

karol wrote:If you don't use a display manager, create one.
Ok, but if I make any display manager do I become susceptible to this attack? Further, am I ok with my current xstartup?

Similar Messages

Query runs from command line, but not from scheduler

We use Control-M to schedule shell scripts to be run on a Solaris server. Some of the scripts have to access an Oracle database and in that case our security team will include the DB user and password in the script, then encrypt it and the sys admin team schedules the encrypted shell script with Control-M. That works fine, but we've been trying to have the DB user and password on a separate encrypted file so that we don't have to ask for file encryption every time it's necessary to modify a script (this is a test environment).
We have the script at ~/system_name/scripts, the query at ~/system_name/sql and the encrypted file and key at ~/system_name/keys. The SQLPlus call in the script is:
${ORACLE_HOME}/bin/sqlplus "`decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system`"@instance_name <<EOF
@${DIR_SQL}/TEST_QUERY.SQL
quit
EOF
The security analyst has tested is successfully from command line, but when we schedule it with Control-M the job abends and we get the following in the sysout:
+ decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system
decrypt: cannot open ./../keys/key.3des.system
decrypt: invalid key.
+ /u00/app/oracle/product/11.1.0/db_1/bin/sqlplus @instance_name
+ 0<<
@/sistemas/hmp/system_name/sql/TEST_QUERY.SQL
quit
SQL*Plus: Release 11.1.0.6.0 - Production on Mon May 3 09:41:55 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SP2-0310: unable to open file "instance_name.sql"
Enter user-name: SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
0000000080
Any ideas?

Looks like the command is being split in some way - the connection to sqlplus is being made before it completes the whole string
It appears to be seeing the @instance_name as a script to execute rather than a db to connect to.
Is the database on the same server as the script?
If so, try setting your environment to the correct databsae, so that you can omit the @instance_name part of the syntax and see if it helps
Also just noticed the failure to open the decrypt script. It would appear uyou are not using a full path name. Have you checked which directroy the scheduled job starts in? You may need to look at running some environment specific scripts first.
Edited by: LindaA on 05-May-2010 07:43

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Batch/script from command line and crontab

Is possible to create a batch from adobe photoshop 5.5 and use a command line to execute? I need easy batch like "open and save in another kind of extension" but can't find the solution to automate the process from command line.
Any1 can help me?
Thank u all

It sounds like droplets are exactly what you need. Droplets turn any action into an executable that can be run from the command line passing files to process as arguments. Just make the action you described, and go to go to file > automate > create droplet in photoshop to make the droplet.
P.S. this has nothing to do with bridge

Run PDF File from command line and goto a bookmark

Hi,
I need to open a pdf file vi command line (WinXP / Win7).
Till this I do not have a problem.
But I need to go to a bookmark in the file direct after opening the file.
I tried "acrord23.exe /a nameddest=BOOKMARK file.pdf" but this opened only the file.
"acrord23.exe /a zoom=50 file.pdf" works fine.
Is there another parameter to go to a bookmark after open a file?
Where is my mistake?
Thanks in advance
Regards
Marc
Message was edited by: mgemmerich - reason: typo

Hi,
I read the PDF Open Parameters reference. So I tried the nameddest. I think the nameddest is a bookmark, or is this wrong?
The background is, that we have the dokumentation for our application in word. So we save the word as pdf. Each chapter is now a bookmark.
In the application we want to call the pdf and jump to the bookmark. Each frame were you can call "help" is a chapter/bookmark.
Or is there another way to do this?
Regards
Marc

Running from command line

Can anyone suggest any tutorials that will explain running a java prog from the command line in windows. So far all I have used is NetBeans. The prog I am looking at the moment requires parameters to be put in when it is run, and I assume that that can only be done from the command line.
Thanks V Much

Resources for Beginners
Sun's basic Java tutorial (this one will show you how to run java applications from the command line)
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is the creator of Java. It doesn't get much more authoratative than this.

Programed in Eclipse, runs under Eclipse doesn't run from command line

Hi,
have created a small Java program under Eclipse. When I right click on the package and select Run As: Java Application from the IDE the program starts fine.
On the other hand if go from the command line ( I'm under WinXP ) and I type java ProgramName under the directory which contains the .class and .java file I get an exception message saying: Exception in thread "main" java.lang.NoClassDefFoundError: ProgramName ( wrong name: ProgramName/ProgramName ) followed by a stack trace type thing.
If I do java ProgramName.class or java ProgramName.java I get a shorter but similar message saying:
Exception in thread "main" java.lang.NoClassDefFoundError: ProgramName/Class
I don't know what could be wrong, at first I thought about the PATH variable but it doesn't seem to be the case.

Hi Sarah
Thanks for replying and sorry for the delay - been on holiday :-)
I am not running any security additions, just a vanilla Fedora 5 Linux installation.
Does anyone have any suggestions as to where I may look to solve this problem as I am at a loss at the moment.

Class files created with JBuilder don't run from command line ?

I have created an Application with JBuilder which is
running perfectly from within JBuilder.
However when I tried to run the app from the command line using c:\java ...... I got an error
Exception in thread "main" java.lang.NoClassDefFoundError: ItasApplication/class
I also tried to compile my .java files with javac which
worked perfectly but I got the same message when trying
to run the app!
Can you help me ?

I did this and I got this message :
Exception in thread "main" java.lang.NoClassDefFoundError: ItasApplication (wron
g name: itasgui/ItasApplication)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:11
1)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)

Tecra 8100: updating bios from cd. exe won't run from command line

I want to update the bios of my Tecra 8100.
I downloaded the bios, but as the pc has no floppy, I cretaed a bootable cd like this
When I boot the pc, do F2, press c to boot from cd, I get into a dos-like environment. I went to drive Z, did 'dir', and see the bios.exe I burned on cd. To run it I type bios.exe and keep getting "command of filename not recognized" when i type dir *.exe, it does not see the file either.
Maybe I am overlooking something here?
+Message was edited by: link removed - wrong info+

Thank you.
It was a different bios then on this page:
I got there from [this|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =8&selFamily=195&selSeries=24&selProduct=103&selSh ortMod=null&language=13&selOS=all&selType=4&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=4&page=1&ID=20831&OSI D=-1&driverLanguage=42 ] page
The download contained a iso, so that was easy enough to do the update.<br /><br />
Thank you very much.
Laptop is fully functional again, better then it ever did on win98se.

Numerical Characters Formatting Problem With XML Report Output Run From Command Line

Hi,
Problem description is:
When a BI Publisher concurrent job is submitted as a child job of a PL/SQL type concurrent request, the locale in OPP is not set same as of RTF template selected. This results in number format and date format localization not work as expected. For example, when BI Publisher child job is submitted after attaching RTF template (through fnd_request.add_layout API) having language-territory as de-DE, the number format on PDF output comes out as 9,999.00 instead of 9.999,00.
Points to notice:
1. In OPP log we noticed that xslt._XDOLOCALE always has value EN-GB irrespective of language-territory of attached RTF template
2. NLS_NUMERIC_CHARACTER column in fnd_concurrent_request table has no value for BI Publisher job. We can set it up through fnd_request.set_options API but it is not a desired solution. We need that OPP should automatically choose correct number format depending on locale of selected RTF template
3. When same child BI Publisher job's output is re-processed through "XML Publisher Report" program and de-DE locale is chosen for RTF template then the number format localization works fine.
Please help us to understand root cause of this issue and how it can be resolved.
Thanks!

Hi,
Problem description is:
When a BI Publisher concurrent job is submitted as a child job of a PL/SQL type concurrent request, the locale in OPP is not set same as of RTF template selected. This results in number format and date format localization not work as expected. For example, when BI Publisher child job is submitted after attaching RTF template (through fnd_request.add_layout API) having language-territory as de-DE, the number format on PDF output comes out as 9,999.00 instead of 9.999,00.
Points to notice:
1. In OPP log we noticed that xslt._XDOLOCALE always has value EN-GB irrespective of language-territory of attached RTF template
2. NLS_NUMERIC_CHARACTER column in fnd_concurrent_request table has no value for BI Publisher job. We can set it up through fnd_request.set_options API but it is not a desired solution. We need that OPP should automatically choose correct number format depending on locale of selected RTF template
3. When same child BI Publisher job's output is re-processed through "XML Publisher Report" program and de-DE locale is chosen for RTF template then the number format localization works fine.
Please help us to understand root cause of this issue and how it can be resolved.
Thanks!

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

Error while running ADF-BC Test Suite from command line

Hi,
I have created a separate test project containing the Test Suite for the Model componenet of my ADF-BC application.
I need to run this test project separately from jmeter.
The tests run fine from Jdev, But when I package the test project into a jar and try to run from command line, I get the following error:
java.lang.NoClassDefFoundError: oracle/jbo/ApplicationModule
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<init>(ServiceAMFixture.java:36)
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<clinit>(ServiceAMFixture.java:15)
        at com.oracle.cs.cap.module.view.EntitlementReportDurationViewVO.EntitlementReportDurationViewVOTest.<init>(EntitlementReportDurationViewVOTest.java:11)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
        at java.lang.reflect.Constructor.newInstance(Unknown Source)
        at org.junit.internal.runners.JUnit4ClassRunner.createTest(JUnit4ClassRunner.java:72)
        at org.junit.internal.runners.JUnit4ClassRunner.invokeTestMethod(JUnit4ClassRunner.java:79)
        at org.junit.internal.runners.JUnit4ClassRunner.runMethods(JUnit4ClassRunner.java:51)
        at org.junit.internal.runners.JUnit4ClassRunner$1.run(JUnit4ClassRunner.java:44)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.internal.runners.JUnit4ClassRunner.run(JUnit4ClassRunner.java:42)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.runners.Suite.access$000(Suite.java:26)
        at org.junit.runners.Suite$1.run(Suite.java:93)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.runners.Suite.run(Suite.java:91)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.internal.runners.CompositeRunner.run(CompositeRunner.java:28)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:130)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:109)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:100)
        at org.junit.runner.JUnitCore.runMain(JUnitCore.java:81)
        at org.junit.runner.JUnitCore.main(JUnitCore.java:44)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ApplicationModule
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        ... 27 more
The Test project jar is created as ADF Library JAR File with Model.jpr as the dependent project. This takes care of project class dependencies
All the adf library dependencies are added to the manifest file of the Test Project jar referring to a location lib/ in the jar file directory.
I tried creating the ApplicationModule using both Configuration class (Configuration.createRootApplicationModule) as well as using the JDBC Connection String but both fail when I run the test cases independently from jmeter.
Anybody came across such an error? Please help.
Thanks,
Sapna

Hi Timo,
Im using JDev version 11.1.1.6.0.
I checked the class path on the jdev console. All the library references are mentioned in the manifest.mf classpath of the test project like below:
Manifest-Version: 1.0
Class-Path: lib/identitystore.jar
lib/adfm.jar
lib/groovy-all-1.6.3.jar
lib/adftransactionsdt.jar
lib/adf-dt-at-rt.jar
lib/adfdt_common.jar
lib/adflibrary.jar
lib/xmlparserv2.jar
lib/db-ca.jar
lib/jdev-cm.jar
lib/ojmisc.jar
lib/commons-el.jar
lib/jsp-el-api.jar
etc...
So I expect the library references should be resolved looking at the manifest file.
Another set of entries that I see in the jdev classpath are related to the Model project which is under test.
-classpath
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\.adf;
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\Model\classes;
How do I put these entries into my class path? Will it be sufficient if I add the Model.jar into my test project classpath?
Thanks,
Sapna

CMake behaves differently from within PKGBUILD and from command line

Hi,
I am currently struggling with an issue which I cannot find a solution. The problem is, I am trying to create a PKGBUILD for the CasADi code. The following is the PKGBUILD file written. My problem is the cmake configuration part. When the code is configured from the command line, without PKGBUILD, camke detects the -fopenmp flag for C and C++ compilers. For exactly the same compilers, cmake detects openmp for C compiler but fails to do so for the C++ compiler, when configuration is done from within the PKGBUILD file using makepkg.
My question is, why different behaviors? Any suggestions on what is wrong?
pkgname=casadi-git
pkgver=0
pkgrel=1
pkgdesc="A symbolic framework for automatic differentiation and numeric optimization"
arch=('i686' 'x86_64')
url=""
license=('GPL')
groups=()
depends=('sundials' 'ipopt' 'blas' 'lapack' 'python2')
makedepends=('cmake' 'swig')
checkdepends=()
optdepends=()
provides=('casadi')
conflicts=()
replaces=()
backup=()
options=()
install=
changelog=
source=('casadi::git+https://github.com/casadi/casadi.git')
md5sums='SKIP'
build() {
cd "$srcdir/casadi"
sed -i 's/PythonLibs/PythonLibs 2.7/g' ./cmake_modules/FindNUMPY.cmake ./swig/CMakeLists.txt
cmake . -DCMAKE_INSTALL_PREFIX=/usr \
-DPYTHON_EXECUTABLE=/usr/bin/python2 \
-DWITH_DL:BOOL=ON \
-DWITH_LLVM:BOOL=OFF \
-DWITH_PYTHON_INTERRUPTS:BOOL=ON \
-DWITH_OPENMP:BOOL=ON \
-DWITH_OOQP:BOOL=ON \
-DWITH_DOC:BOOL=ON \
-DWITH_OPENCL:BOOL=OFF
make
package() {
cd "$srcdir/casadi"
make DESTDIR="$pkgdir/" install
Output when cmake is run from command line
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Found OpenMP: -fopenmp
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /home/hamid/bin/python
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /home/hamid/bin/python (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* OpenMP
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating done
Output when running makepkg
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [/openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-Qopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [ ]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-xopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [+Oopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-qsmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-mp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Could NOT find OpenMP (missing: OpenMP_CXX_FLAGS)
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /usr/bin/python2
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /usr/bin/python2 (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* OpenMP
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating done

With a little creativity, you can actually do all that from the command line with a single command. It'll look a little crazy, but it can be done.
Whether the script exists on the local machine or not has zero to do with platform indpendence. You assumedly have to get the application onto the local machine, so including the script is not really an issue at all. However, you're talking about system independence, yet still wishing to run command line arguments? The two are mutually exclusive.

[solved]can't run java apps from command line

Every Java program that i've tried to run from command line gives me a error message like this:
augusto java% java Test
Exception in thread "main" java.lang.NoClassDefFoundError: Test
Caused by: java.lang.ClassNotFoundException: Test
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: Test. Program will exit.
`java Test.class` doesn't work too.
but, the exact same code work from eclipse, am I missing something?
Some info:
% ls Test*
Test.class Test.java Test.java~
% cat Test.java
public class Test{
public static void main(String[] args){
System.out.println("doesn't work");
% echo $PATH
/home/augusto/.bin:/home/augusto/.bin:/home/augusto/GNUstep/Tools:/opt/GNUstep/Local/Tools:/opt/GNUstep/System/Tools:/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/bin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/opt/qt/bin
Last edited by hack.augusto (2009-10-27 00:57:53)

also make sure that you current directory is in your classpath.
eg
export CLASSPATH=".:$CLASSPATH"
java Test
your issue is more likely to be classpath related, as java doesn't read the path variable, and the java executable is found
Last edited by bruce (2009-10-27 01:02:51)

How to run Report Builder Report from Command line

Hello,
Can Oracle Report Builder Report (run time report) run from Command line ( SQL prompt or Shell script).
Quick response will be appreciated.
Thanks,
Atif

Hi Atif,
please see Note 74648.1 on Metalink.
Monica

Getting gnome to run from command line and over VNC

Similar Messages

Maybe you are looking for