Getting help on nDVD and Camera issues

Were do I go to get help on nDVD and Camera issues.
Seems that all the posts with DVD issues or Camera issues don't get answered.
Are we at the wrong place?
If so please steer us to the right place so we can get our issues resolved.
Thanks for your help
chevywes

I have a good tip for you.
Go to http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 and I hope you will get help there.
Sorry to hear that nobody here can help you but I am afraid you have misunderstood something.
It is user-to-user forum and if you want to have official Toshiba statements you are definitely on the wrong place.
One more thing, if you have US notebook model go to US support page and search for solutions there - http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
For every known issue you should find technical document with explanation and solution.
Good luck!

Similar Messages

  • I just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

    i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

    It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
    Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
    I'll assume that it was the recovery partition.
    Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
    If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
    If that doesn't work you have a few options:
    If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
    There is a small chance that Techtool Pro 7  will be able to repair your HD if Disk Utility can't.
    If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver.

  • How do i get help in downloading and installing PE 12 and Premier 12 on Win 8.1?

    how do i get help in downloading and installing PE 12 and Premier 12 on Win 8.1?

    Try using another browser if you are having a problem getting the interface to react properly to your interaction with it.  If you need more help, preovide more information regarding what you experience when you tru and it fails.
    Please don't start multiple postings for the same problem - your other posting provided better information.

  • Wifi and camera issue HELP

    Iphone 4s wifi will not connect but is not greyed out , and front camera issue, I have no idea what has happen to it but it is just a black screen.

    Hi Jaccaj,
    If you are having issues with the WiFi connection and camera on your iPhone, you may find the troubleshooting steps in the following articles helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    (under Camera section)
    Regards,
    - Brenden

  • Mic and Cam issues

    I tried to Skype with my family last night, and my mic and cam did not work. They did when I first got this computer (laptop). For some reason, they did not work last night. I could hear and see my family, but they could not hear nor see me.

    hellicar wrote:
    Yes, the mic while on speakerphone did Phil however the mike passed on regular use as well as the mic on the headphones past the speakers on the headphone pass everything else has passed
    You mean it Failed? uhmmm. It could be a hardware issue but try to reload your OS first and see if it rectifies the issue. (make sure you have a backup of your data ). See How to clean reload the BlackBerry 10 OS or BlackBerry PlayBook OS using BlackBerry Link
    Goodlcuk!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • HELP!  Sony miniDVD camera issues with iMovie.

    I have a Sony DVD403 connected to my iMac, trying to bring over movie files to iMovie via USB connection. Apparently Sony records in MPEG format, and I cannot get iMovie or QT Pro to "see" my files....SONY support is no help. Is this Sony camera not supported on Mac? Am I going to have to ditch this $$$ mini DVD camera and invest in a DV camera??? Any and all suggestions welcomed!
    iMac   Mac OS X (10.4.7)  

    welcome busy to the  board...
    that "miniDVDcamcorder not supported" is a well discussed issue here, just read a few pages, if you're not too busy doing so...
    a) iMovie is a video edit app meant to work with firewire connected miniDV camcorders
    by concept, no word of DVD... mpeg2 is a delivery format, not meant for further processing...
    b) iM can control cameras just by firewire protocol, not usb
    c) you can import miniDVD content, but...
    d) don't insert miniDVD in slot-in drives => get an ext. dvd drive..
    e) dvd/mpeg2 needs conversion, choose....:
    * DVDxDV (free trial, 25$, Pro: 90$)
    * Apple mpeg2 plugin (20$) + Streamclip (free)
    * Cinematize >60$
    * Mpeg2Works >25$ + Apple plug-in
    * Toast6/7 allows converting to dv/import dvd, hit apple-k
    Am I going to have to ditch this $$$ mini DVD camera and invest in a DV camera?
    best practise, in case you want to use iMovie....
    helpful?

  • Z1 compact lock screen, heating and camera issue

    I have 3 issues with my sony xperia z1 compact D5503 , which are as below.
    1. I set my auto lock screen time to 5 minutes but don't know how it gets to default 15 seconds after some time. This happens many times in a day. Not sure if its issue with anriod. I have anroid kitkat 4.4 installed on phone.
    2. When my phone is charging, it heats up.
    3. some times the camera gets stuck or open very slow.
    Can anyone please help me on this?

    Download the latest android version 4.4.4 via pc companion. These issues are addressed into that. Also don't use your phone while charging. You isse that's why it heats up. Also normal temperature rise is ok anyway.

  • A3000 flash player and camera issue...

    I managed to get Adobe Flash Player installed onto my A3000, hoping to use it for Flash based chat rooms.
    It now loads and operates Flash chat based rooms, however, when I try to use the video chat Flash says I have no camera.
    ANyone know what I need to do and how to make it work?

    If you want to report Flash Player bug, right location is here. If you report ActionScrit bug, JIRA is right place though.
    By the way I belive this is not bug but expected behavior. I'll follow up more info in Flash Player forum: http://forums.adobe.com/thread/920682?tstart=0
    thanks,
    Hitomi

  • Upgrade to lion if i may be getting an ipad2? and more issues...

    i have an old macbookpro refurbed by someone and it's graphic card is apparantly an issue now. I was told it could be that or in need of a new screen. So i'm at a pass...if i'm going to get aanything new it would be mac and it would be BRAND new, no f'ing refurbs. However i was told i should get the macbook hooked up to the cloud before i get something new so everything can be transfered. I have MAC OSX 10.6.8 2ghz intel core duo and i couldnt upgrade straight to lion to get on the cloud. I dont know what to do at this point. I have thousands of pictures in iphoto and a ton of important files. Not much anything else, but those two things are worth much to me. I dont want to risk losing everything. Do i honestly have to put everything on jumpdrives and cd's ?????? would take me days. 

    The first thing you need to do is back up your data. You will inevitably lose any data you don't back up, no matter what you do.

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
    -Alex

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    with that particular set of symptoms, first check on the possibility described in the following document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

  • E-P1 ORFs getting cropped in Bridge and Camera RAW

    I shot some images with Olympus E-P1 (RAW + JPG) and used some custom aspect ratios (6:6, 16:9) in the camera. I do expect the JPGs to inherit this aspect ratio but shouldn't the RAW image always be 4:3? Is there some setting that I need to turn on in Adobe Bridge/RAW that will show me the 4:3 RAW image irrespective of what aspect ratio I choose in the camera? Just for comparison, Olympus Master (their RAW converter) shows the RAW images in 4:3 format.

    fixed it with this work around
    Camera Raw 8.4 | No metadata or Camera Raw edit

  • FAQ: Where can I get help with downloading and installation?

    See this page for options for contacting Adobe regarding problems with downloading and installation:
    "Contact support - download and installation"
    You can ask questions and search for answers on the Adobe user-to-user forum dedicated to downloading, installation, and setup.
    You can also check the Customer Service FAQ lists for issues with downloading and installation.
    You can order Premiere Pro CS6 here ... or try it free for 30 days.

    Hello,
    This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
    Non-Genuine Windows means that it can't authenticate your copy of Windows.
    It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
    Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
    The Start Menu will show 'CMD.exe', 
    Right-click the CMD.exe file and select Run As Administrator.
    In the CMD window, type: slmgr.vbs -ipk <type your product key here>
    To activate windows after changing the key, type: slmgr.vbs -ato
    It should now accept the new key code and you will need to be connected to the Internet to authenticate.
    If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
    Then create a new setup with your new Windows 7 disk.
    For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
    Best of luck

  • HELP - N90 flip and camera not working

    Hi, I've recently changed the cover on my N90 and now for some unknown reason my camera seems to have disappeared from my menu, my external screen doesn't work and funnily enough, neither does my camera!
    I've replaced the original nokia cover (just in case i missed something) but this doesn't solve the problem...
    Can anyone offer any suggestions at all please??

    That is indeed odd. What has the cover to do with the camera?? strange. try using the shortcut for the camera, perhaps it starts. while on the main screen, pres the "up" button. the camera should start. if it doesn`t , what does it appear?
    You say that the camera has dissappeared from the menu, that really sounds **bleep**py. Try re-installing the main software on your phone (personally, i don`t know how to do this, search the web).

  • Need help with taglib and javascript issue

    I have created two WebSphere portlets (using WebSphere Application Studio), which exchange information by using click-to-action. I have added the click-to-action functionality programatically.
    On my source portlet jsp page I took the java code which generates the click-to-action javascript and added it to a taglib I created. The problem is that now the click-to-action functionality doesn't work.
    When I look at the source code in the browser the javascript and the onClick code is there as it should be, but when I click on the hyperlink, the click-to-action menu is not displayed.
    If I take the java code out of the taglib and put it back into the jsp page it works no probs and on inspection of the generated code it is exactly the same as the code generated by the taglib version.
    I have noticed that when I click the hyperlink to fire the onClick event I get an error message in the browser but when I go to the line number given in the error message, there is no code on that line.
    Any ideas why it doesn't work when put in a taglib?
    Thanks in advance,
    A.

    There can be a million reasons
    1) What is the exact error line?
    2) Try debugging in Mozilla instead of IE. Mozilla's javascript debugger is much better. In IE you may have to look more at the error message then the line it gives you to id where the error occurs.

  • Can I get help to uninstall and then install my  Adobe Flash Player?

    I would like to ask you to help me download the Adobe Flash Player ,  Uninstall it, and then help me down load the Flash Player again.  Can you do that?  Will it cost any money?
    The technician aat Bluemoountain electronic greeting cards recommended I do that to treat a problem I'm having sending greeting.
    Mrs Esther Levy

    Please do not post the same question twice (in the wrong forum).
    I am moving your topic to the Flash Player forum, but you still need to provide some basic information; see http://forums.adobe.com/thread/1195540
    [topic moved to Flash Player forum]

Maybe you are looking for