Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN  Partner number
RCVPRT  Partner type
RCVPFC  Partner function
MESTYP  Logical message
MESTYP  Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

Similar Messages

  • IDOC  error : Entry in inbound table not found

    Hello all...
    Iam gettin IDCO error when im processing inbound IDOC
    (basic type :FIDCCP02 and message type:FIDCC2)  like..
    <b>"Entry in inbound table not found..."</b>
    <b>in diagnosis:                                                                               
    Noinbound partner profile could be found with the following key:
        /XXXHUB/LS/LS/FIDCC2////  ..</b>
    but:
    I maintianed XXXHUB in logical system ( tcodeSALE  )    and
    in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB   and also added  message type FIDCC2 with process code FID2  ...
    what else need to do/configure?....   
    let me know if u need more info...thnaks..

    Thanks guys...for your answers...
    there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
    so  what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
    one more thing...
    iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
    for sender  : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
    for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
    Thnaks....

  • IDOC Error - Entry in outbound table not found - Status 37

    Hello,
    we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
    The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
    I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
    When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
    I am already fighting on it for many hours...
    Thank you in advance
    Michael

    Hi
    In we 19
    Receiver
    Port: A port created in R/3 referencing RFC dest pointing to XI.
    Partner no: LS of XI (CLNT100)
    Partner Type: LS
    Sender
    Partner no: LS of R/3 (RD1CLNT500)
    Partner Type: LS
    Message Type is DESADV
    Basic DELVRY05
    and i am sending blank idoc for testing.
    Regards
    Monika

  • Status 29: Error in ALE service : Entry in outbound table not found

    IDoc: 0000000003560240 Status 29: Error in ALE service
    Entry in outbound table not found
    No partner profile (outbound parameter) could be found using the following key:
    /0000000000/LS//YHROT_XXM_IN////
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    MESCOD  Message function
    TEST    Test indicator
    Procedure
    Please check the EDI partner profiles.
    But The IDOC befor this and after this is successfully run.
    And even after reprocessing also it is giving same error.
    After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
    What would be the issue.
    Please suggest. 
    Thanks & Regards,
    Monika

    Hi ,
    Thanks for your reply.
    We are using one custom message type.
    I would like to give you example of exact scenario.
    Suppose my IDOC has large amount of segments then ,
    It is dividing as
    1st IDOC : Control record ....header and data segments
    2nd IDOC : only data segment
    3rd IDOc : only data segment
    4th IDOC : data segment and Trailer.
    In this way, I am getting all my 4 IDOCs in error.
    What should be d reason?
    your help will be grateful.
    Hi Everyone,
    any update?
    Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM

  • ALE Error 29 - Entry in Outbound Table not found

    Hi,
        I am getting the following error in the IDOC  processing.
    IDoc: <IDOC Number>  Status: Error in ALE service
    Entry in outbound table not found
    I have checked the partner profile. It is OK
    I noticed that the IDoc record doesn't have the defined port. The value in the port section is empty.
    The IDoc message type - CRMXIF_ORDER_SAVE_M
    Basic Type: CRMXIF_ORDER_SAVE_M01
    Any inputs will be appreciated.

    Observations -
    I checked the Status records for the IDOC and there are only 2 entries -
    1. 01 IDoc Generated and
    2. 29 Error in ALE Service - Entry in Outbound table not found

  • Outbound IDOC - Entry in outbound table not found - urgent urgent urgent

    Hi ABAP Guru
    Need Serious help. I created Outbound idoc. Custom message type, basic type etc. I created partner profile as well. But when I see my idoc in WE05 I see following error.
    Entry in outbound table not found
    Diagnosis
    No partner profile (outbound parameter) could be found using the following key:
    /WEBM/LS//ZBSID////
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    MESCOD  Message function
    TEST    Test indicator
    Anyhelp will be greatly appreciated. urgent.

    Hi Subodh ,
    You can check whetther u have released idoc and message type after u have created them. Once u have released these idoc and message types , you can use them in your scenario or they will not will be available .
    U can refer to below link to check on various parameteres at time ALE-IDOC scenario
    (1) /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    (2) /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
    (3)http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    (4) idoc
    (5)http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2178a651ce11d189570000e829fbbd/frameset.htm--
    --This is for Message Control. See the Left Pane in this web page to get the ALE implementation for BAPI's also.
    (6)/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment - Converson Rules Guidelines
    I hope this wud solve ur problem.
    Regards
    Note: Reward if useful

  • Entry in outbound table not found, Error message no. EO400

    I have created Partner profile and include message in partner profile.  when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
    Please suggest me solution for the same.
    Kunjan shah

    Hi Kundan,
    can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
    Regards,
    nagaraj

  • Entry in outbound table not found

    i am using we19 trying to do standard outbound processing for idoc mbgmcr02
    i use  receiver Port internal and partner abc01
             sender  Port -
      and partner abc02
    in we20  is set up partner
    abc01   type ls   in outbound parameter area i see  mbgmcr
    now in 19 when is use as receiver  partner abc01  i get the following error
    entry in outbound table not found
    /abc01/ls//mbgmcr   message no 400   id E0
    can anyone direct me to what i am doing wrong?????????????????/

    Hi Janice,
    See these..
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    cheers,
    Prashanth

  • Entry in outbound table not found E0 400

    Hi all,
        Can anyone please help me with the below error which i am facing in ALE IDOCS.
    status 29: Entry in outbound table not found E0 400
    I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
    may I know what settings need to be verified.
    Thanks in advance.

    SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
    Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
    SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
    This is the SAP code that throws the error message you mentioned
    read table q_edidc index 1.
      select single * from edp13
                      where rcvprn eq q_edidc-rcvprn
                      and   rcvprt eq q_edidc-rcvprt
                      and   rcvpfc eq q_edidc-rcvpfc
                      and   mestyp eq q_edidc-mestyp
                      and   mescod eq q_edidc-mescod
                      and   mesfct eq q_edidc-mesfct
                      and   test   eq q_edidc-test.
      if sy-subrc ne 0.
        concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
                    q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
                    q_edidc-test into text.
        condense text no-gaps.
        message a400(E0) with text(50).
      endif.

  • Entry in outbound table not found in PFAC

    Good day all.
    I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
    Any body have an answer to solve this issue?

    Are you trying to do something related to IDOC/Partner profile related responsibilities?.

  • Entry in inbound table not found

    There is a typical problem here. R3 is recieving IDOCs from other (SRM) systems.
    But the sender's(SRM) partner name is not there in R3. The present IDOCs are getting failed with status 56 and message " Entry in inbound table not found" Please help me out..

    Sending partner (number) is not there...so U cannot have partner profile..

  • "Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

    While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
    "Error in function: Add Table not found [131-183]"
    SAP B1, 2005B, PL 39.
    It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
    This is very urgent kindly help me out.
    Edited by: Philip Eller on May 16, 2008 8:50 AM
    Edited by: Philip Eller on May 30, 2008 8:41 AM*

    Dear,
    The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
    Go to the vendor Citixys for further support will give you a quick reply.
    Regards
    Apple

  • Internal error: Entry in COKA-Buffer not found

    Hi,
    In FB50 I was trying to post the following entries:
    760100 (expense/cost element) Dr.     1000
    100000 (petty cash account)                         1000
    When posting (ctrl+s) the following error appears "Internal error: Entry in COKA-Buffer not found". At this point system stops the transaction and exits from that t.code. On expanding the error the following is displayed :
    "Internal error: Entry in COKA-Buffer not found
    Message no. KC051
    Diagnosis
    The system could not find the entry with the following key in the COKA float:
    Object number  = AO00000000000000108166
    Cost element   = 760100
    Origin group   =
    System Response
    An internal error has occurred. Processing stopped.
    Procedure
    Notify your system administrator."
    We checked the table COKA and the above mentioned object no. was not found. So how is the system displaying this particular Object nu.?
    Can someone please help to solve this problem?

    Hi friends,
    we are having the same problem with PA objects in FI transactions. Object PA in COKA is different from object PA in COEP when we are posting.
    Internal Error: KC051 Buffer not found.
    Issue transactions are: F-02, FBB1, F110,... but curiously transaction F-01 works OK...
    Any suggestions please? We don't know what we can do... we've checked all sustitutions and validations FI/CO but we don't find anything.
    Thank you in advance.
    Regards.

  • Problem with Home Sharing.  Getting the error "The Requested URL was not Found on this Server"

    I recently purchased an iPhone 5.  As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing.  My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake.  All of these videos work fine on all devices in my home except my new iPhone 5.  When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
    Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
    I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
    Does anyone have any ideas as to what's going on?

    Can you see if you can view index page from a browser on iPhone.
    Have you seen live streams working from a different computer...
    if not then check if a proper crossdomain.xml file in its place(webroot folder).

  • When downloading itunes software i get an error message:'apple apllication support not found"

    when downloading itunes software i get an error message:'apple application support not found'...error2 (windows error2)

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application, won't install normally.
    tt2

Maybe you are looking for