Getting iDVD to play in DVD player

Yesterday, I had an iMovie transferred to a DVD by the "experts" at Circuit City. When I brought it home and put it in my DVD player, it would not play. Is there a step I am missing? One would assume that if I wanted it on a DVD, that I wanted to play it in a DVD player...
HELP!?! Need it for surprise party this Sat!

Welcome to discussions!
How did they transfer it to DVD?
What type of DVD did they use?
Maxell,Verbatim,etc. 4X / 8X/ 16X? DVD-R or DVD+R Data?
Sue

Similar Messages

IDVD movie plays on DVD player not on imac

Have burnt DVD using iDVD plays fine on DVD player but not iMac that created it. Shows movie as VLC files

Hi
If it follow DVD Standard - as it use to be when created in iDVD. You see at least two folders on the DVD
- VIDEO_TS
- AUDIO_TS (empty and must be so)
Then the usual origin to this problem are:
- Brand of DVD used (Many Cheap brands DO NOT WORK as Video-DVDs) - I only use Verbatim
- BURN SPEED - If this is not set down there are LOT's of Burn Errors - Many stand alone DVD-Players can handle this but the Mac is very picky - I always set this down as slow possibly (x2 most often ev. x4 NEVER HIGHER)
Yours Bengt W

Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.

You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?

Exported slideshow from Iphoto11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine but show stops 1/2way through because DVD has 2 chapters. How do I eliminate chapters?

I exported slideshow from Iphoto 11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine, but then when playing on DVD player show stops about 12 way and starts over. Seems there are 2 chapters in show. I wan t show to play straight through until end. How do I elimiante chapters or solve problem. Thanks. Bob Low

Try this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Play the disk image with DVD Player and see if you get the same start over half way thru.
Did you create the slideshow in iPhoto in the slideshow mode?
or were you in an album and then used the Share ➙ iDVD menu option? What I'm trying to find out is if the slideshow in iDVD is a movie file or an iDVD slideshow with the photos from iPhoto? If it's the latter how many photos in the slideshow?
OT

How do I burn dvd that will play in dvd player

How do I burn a DVD that will play in DVD player for my TV? Example, iPhoto images, Utube images, etc.

If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Help - my DVD won't play on DVD player or pc

I have a new macbook pro, and have created a large photo album on iDVD. I have tried 3 times to burn it to a DVD to play it on my TV. The first 2 times the program said it only had less than a minute to complete, but went for more than an hour. The DVD's were burned, but would not play on DVD or PC, but would work on my Mac.
The 3rd time, it went through whole process and it actually completed and ejected the DVD, but when I put it in our player I got a "disk error" message.
I am using DVD-R discs. Can someone please help? Or other ideas on how to get a slide show burned to DVD to play on TV?
Thanks
Sharona

Sharona
Did you create a slideshow on iDVD, or create one in iPhoto and put that into iDVD or create a slideshow in iMovie? How many photos are in your slideshow? Some DVD players will not play more than 99 photos, and other players will stutter/skip/pause for a few seconds and then resume playing.
Did you do it like this?
From iDVD Help:
+Creating a slideshow in iDVD+
+Using the slideshow editor in iDVD you can create slideshows from images in iPhoto or from images stored in other places on your hard disk or a connected server. You can also include movies in your slideshow.+
+To create a slideshow in iDVD:+
+Make sure the menu that the slideshow will be accessible from is showing in the iDVD window.+
+If you want the slideshow to link from the main menu, for example, the main menu should be showing in the iDVD window.+
+You can proceed in one of two ways:+
◼
+Click the Add button in the lower left of the iDVD window, and select Add Slideshow from the pop-up menu. A button labeled My Slideshow appears on the menu.+
◼
+Drag an album to the DVD menu. This automatically creates a button that links to the slideshow. The button has the name of your iPhoto album and, if the button is an image button, it automatically displays the first slide in the slideshow.+
+Double-click the button to open the slideshow editor.+
+The iDVD window changes to show the Photos pane if it is not already selected.+
+If you started by adding a My Slideshow button to your menu, the slideshow editor is empty, so you need to drag images to it from the Photos pane, described below.+
+If you started by dragging an album to your menu, the slideshow editor shows thumbnails of the photos in the slideshow. To view photos as a list instead, click the list icon in the upper right of the iDVD window.+
+Add, arrange, or delete photos or movie clips from the slideshow to create the sequence you want.+
◼
+To add images, drag individual photos or folders from the Photos pane or from elsewhere on your hard disk or a connected server to the slideshow editor.+
◼
+To add movies, drag individual movies from the Media pane or from elsewhere on your hard disk or a connected server to the slideshow editor.+
◼
+To reorder the images or movies, select the ones you want to move, and drag them to a different position.+
+If you add a photo album and do not reorder the images, the slideshow displays your photos in the order they are organized in the photo album.+
◼
+To delete an image or movie, select it and choose Edit > Delete, or press the Delete key.+
+Click the Settings button (shown below) and select the settings you want for the slideshow:+
◼
+“Loop slideshow” makes the slideshow repeat continuously until the viewer moves to a different part of the DVD.+
◼
+“Display navigation arrows” shows navigation arrows on the screen. It’s most helpful to display arrows when you set the slideshow to progress manually, which means the viewer controls movement from slide to slide. These arrows are simply a visual cue; the viewer must use the remote control to advance the slideshow.+
◼
+“Add image files to DVD-ROM” adds copies of the photos and movies to the DVD disc so viewers can download them to their computers.+
◼
+“Show titles and comments” lets you add titles and comments to the photos and movies. These are visible in the slideshow.+
◼
+“Duck audio while playing movies” silences any soundtrack you have added to the slideshow while the movie in your slideshow play. This ensures that the slideshow soundtrack and movie audio do not play at the same time.+
+Click the Transition pop-up menu and choose a transition to smoothly move from one image to the next. Only one transition can be applied to a slideshow.+
+To preview a transition, click the Preview button (shown below). The iDVD remote control appears. Use your pointer to click the arrows in the remote control, which highlights buttons on your menu. Highlight the button to which you have added a transition and click Enter on the remote control. Click Exit to return to the slideshow editor.+
+Click the Slide Duration pop-up menu and choose the length of time you want each slide to stay on the screen. (You cannot set a custom duration time, and the duration you select applies to all slides in the slideshow.) Be sure to allow enough time for the transition you selected.+
+To let the viewer advance through the slideshow manually using a remote control, choose Manual. If you want to add a soundtrack to your slideshow, you don’t need to set the slide duration.+
+The slide duration you set does not apply to movies you add to the sideshow. Movies in a slideshow play in their entirety before the next slide appears.+
+Click the Return button to exit the slideshow editor.+
+The duration of your slideshow, in minutes, appears at the top center of the slideshow editor. As you add and remove images, transitions, and so on, you can keep track of how long the slideshow is.+
+When you add RAW images from iPhoto, the RAW files appear in the slideshow as JPEG images. If you choose to save the photos to the DVD-ROM portion of the disc, so that viewers can download them to their own computer, iDVD saves the RAW files, not JPEG images, there.+
+To learn how to add a soundtrack to your slideshow, see Related Topics below.+
+NOTE: A slideshow that you create in iDVD does not show up in the Media pane and is therefore not accessible for use in other iDVD projects.+
Did you create a disk image with your iDVD project? That can often help pinpoint burning issues.
From iDVD Help:
+You can test your project before you burn it by saving it as a disc image. The disc image of your project is a fully encoded version of the project that you can play in DVD Player (which comes on your Mac) or burn to a disc later. You can preview the disc image to make sure your project plays correctly and then make changes, if necessary, before burning a disc.+
+To create a disc image of your project:+
+Choose File > “Save as Disc Image.”+
+Type a name for the disc image.+
+Choose where you want to store the disc image.+
+Click Save.+
+Double-click the disc image icon when the disc image is ready.+
+Launch DVD Player, in your Applications folder.+
+Your DVD project begins playing on your computer. Use the controller to navigate to and view all the content on your DVD. If everything works, the DVD you burn will work in most newer consumer DVD players and computers with a DVD drive.+
You may also find these helpful:
http://support.apple.com/kb/TA23794?viewlocale=en_US
http://support.apple.com/kb/TA23793?viewlocale=en_US
Be sure to use a good brand of DVD-R disks, such as Verbatim or Maxell. Choose a burn speed of 4x or less.
Post back if none of this helps.

How do I burn photos from macbook air to dvd to play on dvd player

how do I burn my photos to a dvd to be played on dvd player?

http://store.apple.com/us/product/MD564ZM/A
You also need to determine what kind of DVDs your player supports. My player will play discs with image files on it. Some players will even play files in mp4 format. If yours will only strictly play DVDs in DVD format then you have to author them with a tool such as iDVD (no longer sold).
If you are playing these at home you might see if you can ouptu video straight to the video device from your MBA.

Audio doesn't play in DVD player

Hello,
First post here, so be gentle.
When I burn a DVD, there is no sound when I play it on my dvd player. It plays fine when played on my Mac.
Here is what is going on:
1. capture HD video in imovie 06.
2. add chapters, no external audio or photos
3. export to idvd
4. check video in idvd, all looks good, includes audio
5. burn dvd
6. when burn is complete, play in DVD player
results:
No sound when playing video.
I am not sure where to go next, I will try another DVD player this evening. When creating a DVD with the exact same setup but not HD content, everything worked fine.
Any Ideas?
Thanks
Bill
Message was edited by: Bill Wilson
Changed Title

If it plays OK in your Mac, iDVD 'has done its thing'.
Not all set top like writable media - this might be your problem.
More likely, your problem involves a high level of burn errors resulting from low quality media and/or a high burn speed. Instead of going directly from iDVD to writable media, create a disk image file (an option under FILE). Use Apple's DVD Player to verify the mounted (by double-clicking on the disk image icon), then use Apple's Disk Utility or Roxio's Toast to burn the disk image to writable media. Use good quality media (Maxell or Verbatim) and burn at a low speed (4x or slower).
F Shippey

Can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

NStrange wrote:
... confused about which video format(s) to use (e.g.: SWF, MPEG4, etc.), and whether or not I should use 3rd party compression software (e.g.: Sorenson Squeeze, Compression Master, etc.) along with / in addition to Final Cut Express (among other similar issues)...
FC/e is based upon the Quicktime-engine; so, on 'Export using QT', you'll get all codecs & settings.
but which one..
due to sheer popularity, YouTube became a 'standard' - I'm happy with the convenience, YT and the 'embed'-code offers - excellent quality, automatic adjusted to the watchers connection&hardware.
my export settings are 720p, h264, 6MBit/sec - gives a - imho! - superb quality.
(example of a 'screen-test' from my latest project CLICK )
for creating so-called 'flash video'/.flv, you need 3rd party apps.
Sorenson Squeeze is more of an pro-tool, .. you need some background knowledge to get noticeable 'better' quality.
.. and the question is: are you willing to pay $.$$$ for that 0.x% more quality .. ? does your source offers such a 101% quality, which needs such affords?
if bandwidth is an issue, because you're hosting on your own servers, consider the free codec xh264, you can install as a free QT-plug-in.. with low or super-low bitrates, it offers a superior quality compared to h264 ...

DVD-R discs will not play on DVD Player

The DVD-R discs I made will not play on DVD Player Version 4.0.
I transferred VHS to DVD-R using an RCA VHS/DVD Recorder. The discs played well in 3 different DVD players but will not play on my i-book.
Please help?
New At This
i-book G4 Mac OS X (10.3.9)

In a nutshell the problem is the fact that the Software used by the RCA recorder is for PC.
When recording DVD's the software that is available varys greatly.
Some of the top of the line software gives options to burn PC only, MAC only, and PC or MAC combined.
It was also brought to your attention to use VLC Player on your Mac the firmware that is used with this player will sometimes allow for playing DVD's that were burned on these VHS to DVD Burners.
Here are a few tips that affect reading and writing DVD. This link is only a small amount of what can and does affect, I suggest you do a Google search to learn all you can.
http://docs.info.apple.com/article.html?artnum=25402
Cheers Don

HT1382 Is there anyway to convert video taken by ipad and burn it to a DVD that can play on DVD player?

Is there anyway to convert video taken by ipad and burn it to a DVD that can play on DVD player?

Persius,
Nearly every DVD that will play on a set-top player *should* play on a computer, provided two things:
1.) the computer has a DVD player that can handle that flavor of DVD media, DVD RW, DVD-R, DVD+R, DVD DL, etc.
2.) the computer has a software player installed. This feature has been removed from some common media players. You may need to locate, download and install a separate software player.
There could be another discussion on interlaced vs progressive scan media, but I'll let you ask that question.
Hunt

I made a slide show with music and random transitions in iPhoto. I can't burn it to a DVD. The burn button in iPhoto is not highlighted, and when I exported the slide show to iDVD, it lost the random transistions, and the disk won't play in DVD player.

Two problems: 1. My iphoto slide show loses its random transitions when I export it to iDVD.
2. When I then burn it to a disk, the disk will not play in a DVD player, but only on my MAC.
Any ideas?

The random transitions can only be random when played in iPhoto.
If you are in the slideshow mode and use the Share ➙ iDVD menu option a quictime movie will be created of the slideshow with the first random set of transitions and imported into iDVD. The transitions, however, will be fixed permanently and will not be changed again.
There is no way to get any sort of random behavior in an iDVD. When it's burned to disk it's locked permanently.
OT

IDVD created disk will not play with dvd player.

We created a 3 slideshow DVD in Idvd 7.1.2 with an additional file of some of the photos added to the DVD ROM. It plays on tv, but only intermitantly will play on the IMAC24, and not at all on the IMAC20. Dvd player says "no compatible disk". both macs have OS 10.6.8. We are using Sony DVD-Rs. How can we get this to play?

Hi
A. I set down burn speed to x4 => less burn errors ---- iDVD/Preferences/Advance - set burn speed
B. I only use Verbatim
C. I use DVD-R
D. I secure a minimum of 25Gb free space on Start-Up hard disk (only one important)
E. I use a Cleaning DVD from time to time
Yours Bengt W

DVD created in iMovie and iDVD appears cropped when played in DVD player

Hi all.
I have created a MPEG4 movie in iMovie 5 and exported it to iDVD 5 and brunt it to DVD (PAL). Now, when I play it in a DVD Player it appears to be cropped or zoomed in a bit. But when it is played through computer DVD player it works perfectly.
I have fiddled with settings and tried it in a few different DVD Players (PS3 made it worse!) but to no avail.
I cannot for the life of me work out what it happening. I haven't changed any settings in iMovie or iDVD because I can't find anything to change.
Please help me!!!

Hi
Most certainly nothing to do with either iMovie or iDVD if viewed on a TV (CRT)
Old TVs had to have what's called an OverScann (about 10% isn't viewable) but when
such material is played back on a Mac or LCD screen one will see all strange lines
and dotted bands that Text-TV uses etc.
To be able to get a perfect match:
• Nobody can't - different TV set's varies
• You can adjust to a specific TV but then You need FinalCut and by trial and error
get the precise shrinking of Your movie.
Yours Bengt W

IDVD will not play in DVD player :( help appreciated!!!

hi, I have been trying to get this gift, a slideshow to a very dear friend and have spend DAYS trying to figure this out. I have burned a slideshow to a DVD-R using the iDVD application. And the DVD will not play in ANYTHING but a playstation 3 unit. I even tried creating an image of the slideshow and saving it to the desk top and burning it to a dvd using disk utilities and still not working I am SO disheartened help appreciated. If I put it in a dvd player or a computer it plays pieces of it like choppy and or skipping. In the playstation it plays fine. But she does not have a playstation. THANKS

Hi
Most often - Cheap DVD brand -
I only use
• Verbatim
• DVD-R (no +R or +/-RW) (SL)
• burn speed set down to x1 or x4 recommended by many
• minimum of 25Gb free space on internal boot hard disk (others do not count)
Yours Bengt W

Getting iDVD to play in DVD player

Similar Messages

Maybe you are looking for