Getting images from camera

I have Elements 4. I am unable to transfer images from either of my cameras to the site. When i attach either to the computer and it says "select a device' it does not give me an opportunity to put in the name of the camera and so i cannot put images directly onto Photoshop. What's wrong?

I don't think that camera card slots on the printers work with Photoshop Elements.
1 -- I use a USB port connected device that is specifically a card reader for camera cards. Sandisk is one manufacturer of these readers. Here is a link for info on their site
http://www.sandisk.com/products/readers-accessories
You do need to be sure that the reader you choose accepts exactly your type and capacity of camera card. For example if you have an SDHC format card, be aware that there are some older reader models that can read the SD format but not the SDHC forrmat.
2 -- I expect that Windows Explorer may be able to read your camera card in its slot on the printer. So if your printer card slot shows in Windows Explorer, you could try using Windows Explorer to COPY your photo files to your PC hard drive and then do a PSE 4 Get Photos from Files and Folder to enter those photo files in the Organizer.
Personally I favor using the camera rather than computer software to delete photo files from the card. And in this case, I would definitely NOT delete the photos from the camera card until I was totally sure of the transfer to the PC.

Similar Messages

Can not get images from camera roll in Iphone into Itunes

When I sync my iPhone with iTunes then sync it as normal, but it is not just the pictures located on Kamara roll in over the iPhone with iTunes. It tends to make it otherwise, what can I do?

Camera roll photos are not synced at all.
You need to import them as you would import pics from any digital camera:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Bridge CS4 Not enough room on destination disk, when Getting Photos from Camera

When trying to "Get Photos from Camera" after the 2nd or 3rd photo has been moved to folders I receive a box that states:
The backup destination folder is low on disk space, and could not obtain all files from the device. (which is a compact flash card) Please select a different folder or cleanup disk space and try again.
Please note there is plenty of space available on both drives that the photos are being saved to.

Mike
what Ramón says,
I use Downloader on a daily base and don't have troubles with it. And yes it is not a very brilliant piece of software but it does work.
I would suggest that you go to the user library/ preferences and in here find the downloader plist file. drag this to the trash, restart photodownloader (now at factory settings, you need to reset it again to your wishes) and try again.
btw
in an other thread Scott showed an other application for image ingestion. It looks very great but you need to pay a small fee for it :-)
Scott Burns - 9:20am Mar 5, 09 PST (#4 of 5)
Have you taken a look at ImageIngester?
http://ImageIngester.com/

Get photos from camera option in Bridge CS5

I really would like to use the "Get photos from camera" option in Bridge CS5, as it would save me a few steps in my normal workflow (dowload images from my Canon 40D with EOS utility, convert to DNG, delete CR2 files, update metadata with copyright information), but when I try with with a large number of images, some RAW images are not downloaded and converted. All jpg images are downloaded. So I would get e.g. images 1.dng, 1.jpg, 2.dng, 2.jjp, 3.jpg - in othere words the 3.dng file would not download. Any help would be most sincerely appreciated.
BTW - when I use the Canon EOS Utility, all files get downloaded, but then these are all cr2 files.
I use Windows 7 64-bit as my OS.
My thanks in advance.

On further testing, it appears that the download function works fine as long as the "Convert to dng" function is left unchecked. So the file loss occurs during the conversion process. I have looked but cannot find an answer - is there a way to batch convert downloaded cr2 files to dng from within Bridge? Or does one have to load up the DNG Converter separately?

DNG conversion fails sporadically with Get Photos From Camera

Camera: Canon 40D and 5D
XP SP2
CS3
Bridge 2.1.1.9
ACR 4.4.1
DNG Converter 4.3.1
Importing my files to Bridge using the Get Photos from Camera (GPFC) option results in sporadic DNG conversion failure. There's no pattern, just a lump of files that don't get converted at the end of the process. It's very frustrating because I have to manually go back and find the files that failed and use GPFC option again. Even then sometimes it fails again!
I'm attached to using the GPFC option instead of the standalone DNG converter because GPFC lets me automatically make a backup file to another disk and adds a template. But even when I use DNG Converter to import the files off my card, DNG fails for some of the files. Purging the cache only works half the time and for some of the files.
Is there any solution to the GPFC problem? I've seen people have similar problems, but with no real conclusions...
Any ideas? Thanks in advance.

Ramon,
No, I have tried purging/refreshing before and it doesn't help, because the un-converted CR2 files are just skipped over and put in the same destination folder as the successfully converted CR2 files (to DNG). I thought it might be a memory issue, but I never have any other applications open. As a test, I purposely opened some other applications to see if MORE CR2 files would be skipped, but the amount of files skipped was still random.
My "DNG Conversion Settings," accessed through the Get Photos From Camera dialogue, is set to:
Jpeg Preview: Medium Size
Compressed (Checked)
Preserve Raw Image (Checked)
Embed Original Raw File (UN CHECKED)
Could some of my Edit>Preferences>Cache options be overloading things and causing skips? I use the default settings because I wasn't confident with messing around with the cache.
Thanks

Capturing images from camera and uploading to sharepoint library automatically.

Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
Rajesh

Hi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Capture images from Camera directly at high resolution

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Found an error related to "can't get video from Camera"

So, I am back with the same issue: it is now 3-4 months I can't Video chat because iChat AV tells me "can't get video from camera". I disable the firewall (for the test), I forwarded nearly ALL the TCP and UDP packets from my router to the mac, I stopped any application such as PostgreSQL or others which might interfeer. I checked I didn't have any strange firewall rules still on even when switched of from UserPreferences (sudo ipfw list)...
Well, I can see myself with the camera but it won't get the image of the party I am connecting to. So... I looked in the console and:
2006-03-04 19:09:14.926 iChat[9245] WARNING: Freeze-frame failed: couldn't get local buffer for layer Local!
Each time, this is the message.
I did the downgrade Quicktime test I also reinstalled the combined update... nothing worked.
It seems CRAZY that nobody at Apple can at least tell me WHERE to have a look. After all the message is not very clear. Where is the problem? My mac, my router, iChat?
I filed a bug BTW... because it DID work in the past and now stoped working, so my netgear router can't be in fault (I also checked the logs of the router and of the firewall... nothing seemed to be stoped)
Alex

Hi Alexander,
Defcom aslo has a Netgear And I will let him come back on that side.
On the error front iChat has about 4 standard messages.
1) User did not Respond.
2) Insufficient Bandwidth.
3) Can not get Video from Camera
4) Did not get data for 10 secs
Unfortunately the causes can overlap, hence the lack of Ahaa !!
The most common feature of all of them is something to do with the way the routing devices are set up.
This leads us to start with the LAN set up,
The ports that are open,
the method used to open them,
Whether DHCP is being used with Port Forwarding as the IP can change to your computer and the Port Forwarding point to the "wrong" IP
How many devices are in the link to the Internet ?
IF you are doing NAT (Port Forwarding or Port Triggering) ?
Whether your ISP has started dong NAT to your service
Whether they offer a SIP based Service like VoIP phones.
11:29 PM Monday; March 6, 2006

In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
"Folder cannot be created"

I solved the problem myself.
jwerth2

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

Error while getting image from database in SUP using ios?

Hi All,
Im developing native iOS application using sup 2.1.3 . Im getting error While retrieving image from SUP database. Here i'm trying to get image from database and show in imageView.can any one help me how to fix this issue?
In database image datatype is 'LONG Binary' .
My table Schema:
CREATE TABLE dba.ImagesTable (
RowID INT NOT NULL,
ImageName VARCHAR(20) NOT NULL,
PhotoData LONG BINARY NOT NULL,
IN SYSTEM
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA137 PRIMARY KEY CLUSTERED (RowID)
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA138 UNIQUE NONCLUSTERED (RowID)
in Xcode:
            [SUP107SUP107DB synchronize];
            SUP107ImagesTable *imgTable =[[SUP107ImagesTable alloc]init];
            SUP107ImagesTableList *list =[SUP107ImagesTable findAll];
            SUP107ImagesTable * oneRecord =[list objectAtIndex:0];
            NSLog(@"rowId:%d---imageName:%@---photoData:%@---photoLenght:%d",oneRecord.rowID,oneRecord.imageName,oneRecord.photoData,oneRecord.photoDataLength);
            NSData *tempData =[[NSData alloc]init];
            SUPBigBinary *responseBinaryData = (SUPBigBinary *)oneRecord.photoData.value;
            @try {
                [responseBinaryData openForWrite:[oneRecord.photoData length]];
                [responseBinaryData write:tempData];
            @catch (NSException *exception) {
                NSLog(@"exception: %@",[exception description]);
            UIImageView *imgView =[[UIImageView alloc] initWithFrame:CGRectMake(50,50,100,100)];
            [self.window addSubview:imgView];
            UIImage * tempImage =[UIImage imageWithData:tempData];
            imgView.image = tempImage;
            [responseBinaryData close];
Error Log:
2014-04-02 18:42:15.150 SUP102[2873:70b] rowId:1---imageName:Apple---photoData:SUPBigBinary: column=c pending=1 allow_pending_state=1 table=sup107_1_0_imagestable mbo=0x0 key=(null) ---photoLenght:90656
Printing description of responseBinaryData:
<OS_dispatch_data: data[0xc891b40] = { leaf, size = 90656, buf = 0x1213a000 }>
2014-04-02 18:42:33.304 SUP102[2873:70b] -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] exception: -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.306 SUP102[2873:70b] [ERROR] [AppDelegate.m:497] NSInvalidArgumentException: -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40

This thread talks about uploading image to SAP from a IOS device,Sending Image to SAP via iOS Native app (SUP 2.1.3)
Midhun VP

Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore

So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..? Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful. I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week
CS6 running on windows 8.1

Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...?

Grabing images from camera & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

How to get photos from camera or memory card into new macbook?

how to get photos from camera or memory card into newly announced macbook? thank you joanlvh

And to diversify the use of that port, you could get this specialized adapter:
http://store.apple.com/us/product/MJ1K2AM/A/usb-c-digital-av-multiport-adapter
The cost of admission is modest - at $79 - for what all that it does.

How receive image from camera with PCI-bus

Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.

Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente

Getting images from camera

Similar Messages

Maybe you are looking for