Getting Information about In-Time and Out-Time

Hello Experts,
I want to retrieve the In time and Out time of Employees.
The data is maintained in Infotype 2002 (Attendences).
How would I get the data.
Is there any Function Module avaiable for this ?
Please help me out..
Regards,
Ravi Khattar.

Hi Ravi,
The In time and Out time of Employees is maintained through table TEVEN . Tou can use this FM
HR_TMW_DB_READ_TEVENT
Have Fun!!
Ira!!

Similar Messages

How to get informed about new features and version...

Hello,
I used to get informed on skype when a new version is launched, but now I dont. I noticed it when I delete skype and re-install again from the site for a reason. Also I want to learn about the new features via e-mail. What should I do?
Regards

To manually check for new updates, you can click the Check Update option in the Help menu in the Skype software window. Then if there are new versions released and you want to know what new features are added in that release, you can check the Skype Blog's Garage section -
http://blogs.skype.com/category/garage-updates/
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Get information about Subscribed Consumer and messages in queue

Hi,
I use a library that allow to set a set of consumers. They read messages I send. I check if the consumers are subscribed through "Open Message Queue Administration Console". Through Broker->Destinations I found the consumer under the correct destination I find the consumers with the message in queue, state and other information. I would like to obtain these information programmatically.
Could someone link me an example?
Thanks, bye bye.

Hi,
I'm reading the page but I cannot find the jar file that contains this package:
import com.sun.messaging.jms.management.server
and the classes:
-MQObjectName
-DestinationAttributes
-DestinationType
What is the jar file for the class above?
Moreover, I cannot find the class:com/sun/messaging/jmq/management/JMXMQAddress
when I try to use the code I wrote I receive this error:
>
java.lang.NoClassDefFoundError: com/sun/messaging/jmq/management/JMXMQAddress
     at com.sun.messaging.AdminConnectionFactory.getJMXServiceURL(AdminConnectionFactory.java:257)
     at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:207)
     at testcase.eventManager.DPCTRMSEVENTMANAGER.message(DPCTRMSEVENTMANAGER.java:123)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99)
     at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75)
     at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45)
     at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66)
     at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35)
     at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52)
     at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:45)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jmq.management.JMXMQAddress
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     ... 23 more
Where can I found this class?
Thanks, bye bye.
Edited by: PiotreUgrumov on May 13, 2010 8:29 AM

Table to get information about DSO's and Cubes.

Hi Guys,
I'm in search for the table name which records the details of Cubes and DSO's like (Sixe, No. of Rows, etc). Can anyone of you please help me in getting the table name?
Regards,
Swapnil

Hi,
PFB the table for DSO and Cubes:
RSDODSO- Directory of all ODS Objects
RSDODSOT -Texts of all ODS Objects
RSDODSO-IOBJ InfoObjects of ODS Objects
RSDODSOATRNAV -Navigation Attributes for ODS Object
RSDODSOTABL -Directory of all ODS Object Tables
RSDCUBE -Directory of InfoCubes
RSDCUBET- Texts on InfoCubes
RSDCUBEIOBJ -Objects per InfoCube (where-used list)
RSDDIME -Directory of Dimensions
RSDDIMET -Texts on Dimensions
RSDDIMEIOBJ -InfoObjects for each Dimension (Where-Used List)
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ- MultiProvider: Selection/Identification of InfoObjects
RSDICHAPRO -Characteristic Properties Specific to an InfoCube
RSDIKYFPRO -Flag Properties Specific to an InfoCube
RSDICVALIOBJ I-nfoObjects of the Stock Validity Table for the InfoCube
Best Regards,
Ravi

How to get information about permissions modification and deletion and addition in SharePoint

Hello ,
There was some security issues in my SharePoint farm . Some one has change the permissions of users . How we can trace that who is added the new user or modify the users from SharePoint Group .

Hi Kuldeep,
Based on your description, my understanding is that you want to track the user and users’ permissions in SharePoint 2010.
Here is a CodePlex solution, after enabling the feature, you can track the users and permissions, please take a look at:
http://www.codeproject.com/Articles/431342/Auditing-A-Built-in-Feature-of-SharePoint
There are other third parties for auditing, you can refer to the link:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/868dee6e-4fdc-4d4c-8040-4cf468810446/sharepoint-2010-auditing-tracking-changes-to-permissions-in-subsites-using-sharepoint-groups?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Oracle BPM Java API - getting informations about process activities

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

[C] Get information about touchpad

Hi,
I'm completly new to writing Linux applications in C.
In my program I want to enable/disable my touchpad based on whether or not a mouse is present. But I can't seem to figure out which library I need to use to get information about my touchpad and how to enable or disable it.

Hello Caillen
Thanks for reply.
Where can I find APIs or SDKs for Nvidia and ATI Video Graphic cards?
tnx again
Edit 1:
I've found these link about
CUDA Toolkit 7 for Nvidia and
APP SDK for AMD.
Can I do what I want with this SDKs?
Is there any tutorials or sample to help me use them?
Edit 2:
In TechPowerUp GPU-Z software, I've found this:
Did TechPowerUp
used
this SDKs to get
their needed
information?
In TechPowerUp GPU-Z software,
I see only one executable file and there is no dlls or anything.
I'd like to do this job like them. How can I do that?
thanks

TS1424 I am trying to download a song and it gets to about 3.5mb and stops, then starts all over again. It has done this several times. Could the file be corrupt?

I am trying to download a song and it gets to about 3.5mb and stops, then starts all over again. It has done this several times. Could the file be corrupt?

Turn off the Firewall in System Preferences > Security (or Securtiy & Privacy) > Firewall
If you have anti virus software installed, you may need to disable that before downloading.
Restart your Mac and try again.

Some information about http time out

hi 2 all,
I want some information about http time out,like what all different transactions are used.

Hi,
Could you be more specific? Here is a blog about timeouts:
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
/wg

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

How to get information about creation of a virtual machine on a Hyper-v host.

Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius Valiant

For Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

How do I get information about new legal requirements?

Hi
We are 4 people in a company that has 39 active company codes in about 25 countries. How can we subcribe to whenever SAP releases new reports that meets legal requirements in specific countries? Some of our companys have their bookkeeping taken care by a neighboring country, so the bookkeepers would not know if there is a new report released from SAP. So how can we get information about new reports without having to read throug all the release documentation?
Hope you can help
Jens Bald
IC Companys
Denmark

Hello Jens,
this is a real problem.
What is my experience? The first priority is: try to use the SAP Standard as far as possible. No user-defined reports, no exits. Try to be always up to date with hotpackages.
A further help for me are the userforums here. If you have five minutes left, just have a look at all the questions and answers.
I know, there is a lot of stuff to read, but the releasenotes have to be checked. Unhappily I didn't find another way.
Sometimes SAP reacts just in time regarding new legal requests - and I can understand this. At least I have to say: It is not possible to manage this without having any support from the accountancy side. This enables you to search for this requests - instead of reacting.
If a country changes statutory requests regarding taxreporting or new taxtypes, changing of rates the guys from local accountancy ought give you a hint. Because they get this information at first.
I made good experiences with internal accounting forums or user groups (i. e. northern countries, westeurope, USA, southeurope).
Maybe it gives you a little help and I am very interested in all the answers to this thread.
Best regards
Horst

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Getting information about an object from JList

Hi
I have created a movie application and i have a JList displaying all registered movies, it uses a DefaultListModel to display these.
I want to be able to click on an element in the JList and then push a button called "Show movie details" to display all information about the selected movie.'.
Every new movie is added to the DefaultListModel as an object with "Titlle", "Genere" etc. If someone click on a movie, what do i do to get information about which object that was clicked. All i can see is that integers can be returned with the getSelectedIndex/Value methods. If i use one of these methods to get the object from the DefaultListModel, that would work i guess, but what when someone deletes a movie in the middle of the JList, then the indexes wouldnt match.
Can someone help me out here? :)

I get a big fat exception when trying to cast the returned object to a Movie object which im using.
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: java.lang.S
tring cannot be cast to Movie
...sure that this is the way to do it? If so, what am i doing wrong..

Getting Information about In-Time and Out-Time

Similar Messages

Maybe you are looking for