Getting installation from billing document and then devices from that inst.

From the  billing document with billing class 'PSPC'  how to collect the installation(there could be more than one device) connected to it and the 'valid from' date.Which table are used in terms of ABAP.
How  to query on these tables.

As far as I know
1. Get the VERTRAG from ERCH for the given BELNR
2. Get the ANLAGE from EVER for that VERTRAG
3. Get the u2018Valid fromu2019 date  from EANLH for the above ANLAGE
Regards,
Rajini.

Similar Messages

  • I have a LaserJet 5L printer and I can't get it running properly under 10.5.8 while it works fine under 10.4.11. It only prints the first document and then shows the queue and prints slow like ****, it says so, but nothing printed after30 minuts.

    Hi.
    I have problems to get my Laser Jet 5L running properly under 10.5.8. I prints the first page/document and then it says1,36 % printed than printing but nothing happens. Under 10.4.11 everything works fine, sometimes I have to get the print jobs running again,but then it works.
    I have the Laser Jet 5L connected via USB to parallel.
    I am running a PowerBook G4 1,67 GHz and 2 GByte RAM.
    Best regards
    LasertJet5LApple

    Hello, since nobody has piped in yet...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x
    1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2. Choose System Preferences from the Apple menu.
    3. Choose Print & Fax from the View menu.
    4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

  • HT1212 i have lost my password and been trying to restore but don't understand way it never get completed(my ipad3 gets on between the process and itunes reminds me that the device is passcode protected so it can't be connected and then the download also

    after attempting many worng passwords my ipad atlast ask me to connect to the itunes and there is't any other option it is showing on it , and don't have the backup of my ipad on my pc so search the net and got the answer to restore it ......
    i have lost my password and been trying to restore but don't understand way it never get completed(my ipad3 gets on between the process and itunes reminds me that the device is passcode protected so it can't be connected and then the download also stops) some times at 500mb and even at 700mb
    please if some one know the sloution
    help me
    thanks
    its ipad 3

    Follow these instructions to resolve a forgotten passcode:
    http://support.apple.com/kb/HT1212

  • When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

    When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

    hi barbara
    thank you for your response, i appreciate it.  there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either.  it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was.    thank you again, wish me luck!

  • Trying to download iTunes 10.4.1.  I have windows xp.  iTunes would not load.  I followed the directions from this sight to uninstall everything.  When I try to install, I get this message:  C:\Documents and Settings\Kelley\Local Settings\Temporary Intern

    launch so I am trying to reinstall.  I followed the directions from this site about uninstalling and deleting files and making a backup.  When I try to
    install I get this message:  C:\Documents and Settings\Kelley\Local Settings\Temporary Internet Files\Content.IE5\AFYW6D11\iTunesSetup[1].exe is not a valid Win32 application.  I click ok.  Nothing happens.  Any ideas?

    Hi - thanks for your help and sorry not to have replied before - I've been away.
    I use mainly Chrome but also tried IE8 just in case - no difference.  However I finally remembered that when I had a similar problem downloading/installing OS4 for my iPhone (which crashed it and caused total lockup for about 4 days, resolved only after hours of calls to iPhone helpdesk) it turned out that the problem was caused by my home wi-fi connection.  When I hard-wired the network connection the problem was solved.  I tried it with iTunes - and it installed first time.
    Don't know what would cause this problem, which as far as I can see affects only Apple software.  Everything else seems to download and install over the wi-fi without glitches. 
    Best,
    John

  • I am trying to download Firefox and it gets to about 95% done and then it stops.

    I tried updating Firefox but it kept getting to around 95% done and then it just stopped. After about 10 minutes it would say that it could not download and to try from the site. I tried uninstalling Firefox to do a clean install like someone said online and I am still having the problem. I have tried using 2 different browsers to download it and it still gets almost there and then just stays there. Any help would be amazing

    Are you downloading the "full" installer from this page: [https://www.mozilla.org/firefox/all/]? If you are getting the "stub" installer, or choosing "Run" instead of save, try saving the full installer to the desktop and running it from there.
    Also, if you haven't shut down and restarted Windows since this problem began, please try that in case there are some Windows Installer issues like an accumulation of queued updates or crashed component.

  • How to syncronize billing document and accounting document numbers?

    Hello,
    In RV60AFZC USEREXIT_NUMBER_RANGE_INV_DATE I changed the number range for the billing document from what is configured for F2. I need for the accounting document number to be the same as the billiing document number. I have created an new external accounting document number range equal to the new biliing document number range, but the accounting document number is still being assigned from the number range that is configured for RV. How can I get it to pick up the new accounting doc number range?
    Thanks much,
    Joy

    Dear satyam
    Go to SE16 / BKPF, give the accounting document number reference in "Document number" and execute, so that you will get the respective billing document number.  Make a note of it.
    Now go to again SE16 and give table VBFA and give all the billing document references in "Follow-on doc" and maintain "C" in "Prec.doc.categ." and execute.
    Alternatively, you can try with table joining BKPF and VBFA in SQVI.
    thanks
    G. Lakshmipathi

  • Billing Document and Material Document Relation

    Dear all,
    i need to know about the relation between Billing document and Material document.
    Please let me know if there is any Function Module or Some View available to get these details.
    my only requirement is to get only Material document From Billing Document.
    Thanks In Advance.
    Pradeep.

    Hi
    So the material document should be linked to the delivery
    The document flow:
    Delivery->Outgoing moviment->Delivery->Bill->FI invoinces
    If you start from FI:
    - Get the bill number from header data: BKPF-AWKEY
    - get the delivery number from bill item VBRP-VGBEL
    - get the document flow for the delivery: VBFA: here you can find out the material document
    Max

  • How to get rid of old documents and emails?

    hi,
    how do i get rid of old documents and emails from my computer? i know they are there because when i type something in my search bar, i get documents and emails i got years ago. what do i do to get rid of these things?
    thank you,
    yellow_lamp
    what i meant to say, if i didn't say it clear enough, was how do i get rid of old documents and emails that are not currently in my document folder or in my email inbox.

    Select the email/s you want to get rid of and then select delete. When all the emails are deleted, select your Trash mailbox, select all the emails and then select delete.
    Documents you can drag to the trash (lower right side of Dock). Then empty the trash.
    Then stop down to your local bookstore and get some books on Mac OS X.

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Billing Document and Material Document number and Date (Goods Issue)

    Dear Experts,
    Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
    Thanks

    Hi Abid
    Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
    You have to follow the flow from the billing document to the material document. This will only work if the billing document comes from a delivery note.
    Billing document => Delivery
    LIPS-VBELN = VBRP-VGBEL
    and LIPS-POSNR-VBRP-VGPOS
    So you have LIPS + LIKP with the LIKP-WADAT_IST as the goods issue date.
    Delivery => Material Document Number
    You can use the table VBFA with the delivery item as the preceding document number (VBFA-VBELV) and item (VBFA-POSNV) ; you will also have to define the preceding document type as J (delivery) and the document category of subsequent document as R (material document).
    Because in SAP nothing is simple, there might more than one material document, because the goods issue (601) movement might have been canceled and issue again. So you will have to decide what to do in that case.
    Best Regards,
    Franck

  • We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a m

    We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
    Also, our resulting pdf documents aren't searchable.  How can we generate pdf documents that are searchable?  I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
    Can you assist?

    Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
    If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

Maybe you are looking for