Getting Internet traffic statistics through TC

Where can I locate network statistics on my Time Capsule?
I often work from home and transfer large images (<1MB usually) to and from my office via a VPN connection. Recently Comcast, my ISP at home, has begun to send out an occasional notification about limits for downloading with out paying additional fees. It's a pretty large quantity (250GB/month, I think) so I'm not worried about hitting it anytime soon.
I'm just wondering if there's a way to get daily, weekly, or monthly statistics on how much data I've transferred from my home network to and from the outside world.
I have Time Capsule directly connected to my cable modem and all of my network machines go through it to get to the Internet. Does Time Capsule maintain such data? If not, is there a program that I can load onto it to do so?
Thank you.

I'm pretty sure its because I'm not NATing the traffic but I can't figure out why my NAT wont work. Here is what I'm doing.....
Client VLAN 181
Server VLAN 151
The servers are setup with the default route as the ACE's alias IP address on VLAN 151. The VIP is in VLAN 181, and the SLB works correctly. So I need to figure out how to NAT traffic originating from the SERVER VLAN. This is what I was trying but I couldnt get it working.....
access-list NAT_ACL extended permit ip 192.168.151.0 255.255.255.0 any
class-map match-any NAT_CLASS
2 match access-list NAT_ACL
policy-map multi-match NAT
class NAT_CLASS
dynamic 1 vlan 181
int vlan 151
ip addresss 192.168.151.176 255.255.255.0
alias 192.168.151.175 255.255.255.0
peer ip address 192.168.151.177 255.255.255.0
no shutdown
int vlan 181
ip address 192.168.181.5 255.255.255.0
alias ip address 192.168.181.4 255.255.255.0
peer ip address 192.168.181.6 255.255.255.0
nat-pool 1 192.168.181.150 192.168.181.200 netmask 255.255.255.0
service-policy input NAT

Similar Messages

Trouble getting internet through Airport Express

I am trying to set up the most basic wireless network with a cable modem, Airport Express and G4 Powerbook running 10.4.6. I have went through all the steps of setting up the modem then the Airport Express and configuring it with Airport Admin. and all that. I get perfect signal from the express but when I open Safari it doesn't do anything. It doesn't come up with the network diagnostic "Not Connected to the Internet" screen or anything. When I plug my modem directly into the Powerbook through ethernet it works fine.
It seems as though I am just missing a step or an option or something like that.
I have also tried to use my roomates old Motorola WA480G wireless router with similar results. I can get Wi-Fi signal through the Airport card but Safari brings up the network diagnostic screen.
G4 Powerbook Mac OS X (10.4.6)
G4 Powerbook

I am having this exact same problem, only using a Dell laptop with Windows XP instead of a Mac. I had my Airport Express set up on a LAN at work a couple of months ago and it worked perfectly. It's been in storage for a couple of months, and now that I am trying to set it up at home with my cable modem, I can't get it to connect to the internet.
When I plug the modem in with an ethernet cable everything works perfectly. But when I plug it into the airport (after doing the power down/power up process) the LED goes solid green, but nothing will load in my browser. I can use other wireless networks without problem.
I also can't get it to print anymore. When I plug the printer directly into my computer it prints just fine. But when I plug it into the airport, it won't print. I've set the printer up using Bonjour, and the Airport Admin utility detects the printer. But when I print I get an error message saying that the printer failed to print the document.
Any ideas?

How do I get the internet traffic to come to my own server?

If I'm moving from paying a host for coldfusion to using my own license on my own server, How do I get the internet traffic to come to my own server?

You connect the computer to a network. This is pretty much automatically handled by the hardware and the operating system.
You may want to read up on some of the basics of networking and the tcp/ip world.
To have a networked computer tell you its IP address type 'ipconfig' at a dos command line.

My macbook air is not getting internet connection through our home wifi It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.

My macbook air is not getting internet connection through our home wifi. It was working fine yesterday until I took the Air out of the house and used it on another wifi connection. One question is how to delete some of the networks that I don't use. Would too many networks cause the internet connection to fail?
Thanks.

Would too many networks cause the internet connection to fail?
It shouldn't but sometimes deleting the list of networks actually does solve the problem you are describing. Have you turned WiFi off and then back on on the computer?

How to redirect Internet traffic from RV082 to RV042 through a VPN Tunnel??

Fellows,
We have offices in USA and Venezuela.
In our USA office we have a RV042 router and in Venezuela we have a RV082 router.
We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is:
How   could we redirect the internet traffic from our Venezuela office   (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The   reason for this is that we need to use online streaming services which   are only available for IP's from USA and we can't use them from the   Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
We will really appreciate your support on this matter.
Daniel

Hi Daniel, this is called ESP wildcard forwarding which the router does support.
https://supportforums.cisco.com/docs/DOC-12534   <- This is older but applicable
https://supportforums.cisco.com/message/3766661
-Tom
Please mark answered for helpful posts

Get traffic statistics like tx/rx bytes per day of cellphone.

One part of work with my Master Thesis , I have need to get traffic statistics like tx/rx bytes per day of cellphone.
I had developed for Windows Mobile with C#, but now I wish to develope a generic solution and I think that Java is a great choice.
Can anybody help to show me a better way to get this?
Thanks for all in advance.
Carlos
[email protected]

With J2me this is simply not possible.

My guests does not get internet access through my guest network

I have created a guest network on my time machine. The problem is that my guests don´t get internet access when they choose the network and type the password. I don´t understand why this is happening? My ordinary network is fully functional.

If you are using 7.6.3 firmware on the TC, the guest network does not actually work in bridge mode.. it looks like it does.. but nope, it doesn't.
Make sure the TC is the main router in the network.

Can't get Internet through my own Network Connecti...

Hi, I have a HH3, which I am constantly having to switch off and on again for devices to connect to the Internet. It's been happening for months, and last week BT sent me a new hub, but it hasn't fixed the problem. It seems that our devices connect to the router, but the router doesn't connect to the Internet.
If I select the BT Wifi connection and log in via the Openzone homepage, I get Internet access. But this is not practical for all devices. My children can't play on their tablets and viewing / downloading TV on demand is pretty much impossible. And these were the main reasons for upgrading to Infinity.
I've had several conversations with call centre support staff, but the problem persists.
Can anybody tell me whether this is a settings issue that I can fix? My family is going nuts!

EDIT: As you initially posted on the Infinity board I have assumed you have infinity. If you only have ADSL this will not apply to you.
Make a direct connection from your PC/Laptop to the Openreach modem which will eliminate the homehub. Follow this guide to do that. Use your computer as normal to see if it disconnects. If it does disconnect you will know it is either a faulty modem or a line/exchange fault.
Step 1: Remove the homehub from the modem
Step2: Connect your pc/laptop into the modem using LAN1 port
Step3: Open network and sharing centre on windows and click set up a new connection or network
Step4: Connect to the internet then click make a new connection Broadband PPPoE
Step5: Username [email protected] and the password as BT
Step6: connect, If it doesn't,keep pressing try again until it does.

Mountain Lion Server VPN unable to route internet traffic

Hi! I have set up a VPN server on my home network specifically so that I could connect via a VPN client remotely and tunnel all internet traffic through my home network (It is a long story but I need to be able to access services that are specific to my home IP . . . ) I have been tearing my hair out trying to get it work but can not. The VPN connection happens OK and I can set up the remote client to send all traffic via VPN but any internet traffic just times out . . . In other words I can not get the server to share my home network via the VPN connection.

Hi and thanks for taking the time to answer.
As I am sure you have guessed I don't have much experience or knowledge with this. So I will try to clarify what I am trying to do.
I do not need a VPN server for the conventional reasons of being able to access a private network (i.e my home network) remotely, although this is a nice additional benefit. I need the VPN server so that I can log in remotely (when I am using my mobile broadband or when I am overseas for example) and make it look like the machine I am using is on my home network.
The reason for this is that I have access to web services that are IP specific. That is I can ONLY log in if I am logging in from my registered home IP (which is static for this exact reason).
I have been told on similar support sites that if I route ALL traffic through the VPN, then when I use my browser on the remote machine all web traffic will go through the VPN as well and it will look like the traffic is coming from the subnet of my home IP.
I guess in other words I am trying to use my VPN as an "anonymous" proxy (anonymous in the sense that although the traffic is coming form somewhere else, it still looks like it is coming from my home IP).
I know this will cripple the speed due to the narrow upstream bandwidth but I am willing to pay this price.
Now as for your questions:
I have the server set up on a machine on my home subnet and I have enabled VPN port forwarding on the ADSL router.
I know the connection happens as when I connect the VPN either from my iPhone using 4G or my laptop using my mobile broadband I get the "connecting . . . authenticating . . . connected" messages and when I check in properties it shows it to be connected to my home IP as VPN server and has an IP address that looks like it is on my home subnet.
By internet traffic timing out I meant web traffic.
As I mentioned above, I need all web traffic to go through the VPN. So indeed not ALL traffic but definitely ALL web traffic. The only way I could find to do this is to enable the "Send all traffic" option.
Now I guess the obvious question is why am I not using a proxy. I have tried (and spent ages setting up Squid) but could never get it to "hide" the true origin of the traffic completely.
Now having written all this, I reinstalled mountain lion and server yesterday (out of sheer frustration rather than anything else) and it seems to work this morning. So if I log in via VPN on my mobile or laptop and use an IP checker on the web it comes up with my home IP : ))
The only thing I have now noticed is that if the VPN server stops working (which seems to be as soon as the computer I run it on goes to sleep) web traffic reverts to using the normal channels which is potentially problematic for me.
So my questions now are -
Any ideas what I was doing wrong in the first place?
Any suggestions on how I could set this up better?
Any way to set up the remote device so that it only allows web traffic via VPN (so that if the VPN connection drops, it is unable to use it's own internet connection for continuing web traffic)?
Thanks for any suggestions : )
Cheers

Understanding 5505 firewall-site to site and internet traffic

Hi,
My question is mutli-faceted. I apologize for the lengthy intro here but i think the info is necessary to understand where I am headed in this.
I am new to the cisco 5505. I have had very limited exposure to a 5510 that was preset. I have managed to make modifications to it here and there, but dont completely understand how it was put together. I learn by watching, listening, and gleaning what I can from others. I have had no formal training in CLI, but I have learned some of the commands. I know enough to be dangerous, but I respect my limitations.
That being said, I have been charged with setting up a 5505 at a remote site. I need to accomplish several things. Our ultimate goal is to use this device as a site to site with the 5510 at the corporate office. However, I need to accomplish this in baby steps, test, test real users and then maybe convert in full. Where I could outsource this in its entirety, that would preclude me from learning so I can address this in the future on my own.
We need to have this in place by the end of February 2013.
Currently the remote site is connected via a very slow (by todays standards) T1 line on a MPLS. Stable. Works, but slow. All internet traffic as well as work traffic is routed through that connection. We have added a 50mb cable connection (with static ips) to the office. First we want to set up the 5505 so that it can be used as follows:
1, Internet traffic can be routed out through this device and all other "work" traffic routed through the MPLS.
2, Test using this connection as a route out to the internet AND use it as a site to site VPN connection to the home office. (or anyconnect vpn)
          I need to be able to have users in both environments. IE, some still using step 1 and some starting to use and test step 2.
3, long term, use this as the main connection per number 2, but add the IP address so that if the cable connection drops, the office can access internet via the VoIP T1 line as a life line.
In all cases, I dont want internet going through the home office as it currently is traveling.
I have done a lot of searching but so far have come up empty with answers.
Question 1:     (This one probalby shows my ignorance the worst) - in using the 5505 firewall, will it segregate normal internet traffic from the VPN traffic when used by the workstation? Using the Gui, I didnt see where this was necessarily happening. Do I need to use CLI language (and what) to make this happen? Or is that a basic function that happens during the setup of the firewall using the GUI. Do I need to do some sort of "split tunneling"?
Question 2:     Do I use this device as the Default gateway for both step 1 and 2/3) for normal use and then change the gateway on the Pcs to the VoIP network during emergency use,(that would bypass the firewall though or is there a way to have it route to that router if there is no connection through the Outside port? Or as long as I have some access to the device, can I make a change remotely to help accomplish this failsafe?
Question 3:     We have 25 Anyconnect VPN licenses. Should we use these and not the Static site to site, if so, why or why not? They dont need to be used at all.
Question 4:     In setting up the VoIP line for backup, would using that on the "DMZ" connection help in making this viable so that the device could still ultimately control the internet traffic?
Question 5:     In setting up the VPN connections, unless i am getting the two methods confused, I will need the 5505 to hand out IP addresses for the vpn connection. I see in using a class c schema that i can use 92.168.0.0 to 192.168.255.0. So for instance, I could use 101.1.20.0 for the inside network Vpn addresses?? I need to stay away from 192.168.0.0 networks as we use that in our normal structure.
Reasons for setting this up:
Slow speeds over the T1.
increasing demand for Skype, Video conferencing etc that the T1 pipe couldnt adequately handle
Lack of backup pathways for downed connections - ie, backhoe chopping through wire at a construction site).
I read through the Getting started guides on both the 5510 and the 5505 and feel I can likely get the site to site setup (I have a list of all the Ip addresses i need for inside networks and outside networks etc.
additional notes:
I have to email ATT anytime I want a change made on the MPLS router, so doing as little to that as possible would be good.
I will be onsite for testing at the end of February and will have direct access to the home office via other methods to work on the asa5510 if any additional work needs to be done on it once i am onsite.
Thanks for taking the time to read through all of this. please forgive my lack of knowledge...
Dave

Thanks for getting back to me and so quickly!
1) I am not sure if I understand the “ACL” portion of your question, but this is how I want to access info via the VPN tunnel:
192.168.D.0 inside(NJ) to outside 5505 - 12.175.X.X to outside 5510 - 12.200.X.X to inside network (HQ)192.168.X.0. Routes are needed to find subnets 192.168.A.0, 192.168.B.0 and 192.168.C.0. The default gateway to those subnets right now is: 192.168.X.XX4 inside of HQ. This would be so that the NJ office could find resources of the other offices if needed. This will change as we wean off the MPLS. Inside the ASA 5505, the IP addresses are 192.168.D.0 for data, 10.X.X.0 for the Phone system. All other traffic would be sent out through the internet. Phone system uses the XOcomm conection to route phone traffic.
2) I did some reading on SLA. Thanks for pointing that out. For purposes of learning here, I am showing this as 12.175.XXX.XXX for Comcast and 12.200.XXX.XXX for XO comm.
4) I guess I would use an Outside 2 as that makes sense, in description, I would label them “ComCast” for outside 1 and “XOcomm” for outside 2.
5) I am still not sure I understand this part. Are additional IP addresses needed for the Site to site VPN to talk to the local hosts, or will it use the IP addresses assigned by the local server?
Next Steps
1-         Configure the ASA5510 for the 5505 connection
2-         Configure the ASA5505 for the 5510 connection
3-         Configure SLA for Comcast and XOcomm outside connections
4-         For this I need help….I think this is from step 1, but I need help to configure the internet to be segregated via my question from #1. Have I given enough information to do so? Please advise on ACL entries, and route statements needed so that NJ can talk to all the offices when using this connection, not just the Headquarters.
Thanks
dave

How can I route internet traffic over IPSec point to point?

I have a remote site that connects by IPSEC with the end points on a router and ASA. The connection is working fine and the remote site can access my other networks at the main headquarters. The problem is, currently this remote site is accessing the internet via the same link that is supposed to VPN everything back to headquarters. I need to figure out how to VPN their internet traffic to my main headquarters. There's an IPrism behind the firewall to filter web access so it seems like I need to point the remote sites default gateway to my routing device that's behind my Iprism?
Also, currently the outside interface on the remote site's router does not have an ACL applied, can someone suggest what that ACl should look like? Thank you for your help! Here is a sample configuration of the remote site's router:
crypto isakmp policy 20
(encryption parameters here)
crypto isakmp key password address x.x.x.x (Public ASA IP) no-xauth
crypto ipsec transform-set remotesite (encryption parameters here)
crypto ipsec df-bit clear
crypto map Mainsite 1 ipsec-isakmp
set peer x.x.x.x (Public ASA IP)
set transform-set remotesite
match address 100
interface FastEthernet0/0
description $ETH-LAN$
ip address 10.1.1.1 255.255.0.0
ip nbar protocol-discovery
interface FastEthernet0/1
description ISP Interface
ip address x.x.x.x (public IP) 255.255.255.0
crypto map Mainsite
crypto ipsec df-bit clear
ip route 0.0.0.0 0.0.0.0 x.x.x.x (ISP's default gateway)
access-list 100 remark Access list Mainsite Access
access-list 100 permit ip 10.1.0.0 0.0.255.255 10.3.0.0 0.0.255.255
and other various headquarter networks...

Hi Mark, you can modify your crypto acl to permit any any on your remote site which will make all traffic goes through the tunnel. Then on ASA you need to do hairpinning on the outside interface. This will make users on remote site to access internet via HQ. But if you do it this way the internet traffic goes straight to internet without having them filtered by your iPrism.
What I am not sure about is if there is a way to do it if you want those traffics to be filtered by the iPrism before going out to internet.
HTH

How to get the traffic split up in VPN 3000 Concentrator?

Hi,
Requirement:
I want to parse & analyze the Cisco VPN 3000 Concentrator logs and provide the report for the happenings using the log.
Issue:
I am able to get the traffic split up for Cisco Pix501 thro' it's logs for the VPN connections. But in Cisco3000VPN Concentartor, i am not able to get the traffic details for any PPTP/IPSec connections. It simply provide the overall traffic log when the seeion is closed. For example below is my traffic log,
<189>14014 07/23/2004 19:16:24.640 SEV=4 AUTH/28 RPT=41 192.168.101.41 User [sarav] Group [Base Group] disconnected: Session Type: PPTP Duration: 0:16:37 Bytes xmt: 216 Bytes rcv: 38023 Reason: User Requested
My Question:
Is there any configuration/solution available to get the live traffic[traffic split up] thro' that VPN connection for Cisco3000VPN Concentartor?
Please help me in getting this issue resolved.
Thanks to all helping me to resolve the issue.
Thanks.

You get the details from the Pix logs not because of VPN functionality but because the Pix is a stateful device the manages and logs each and every session.
The VPN 3000 is not stateful or session aware. The best you could do is provide packet level logging, but this would generate enormous log files that would need to be statistically analyzed to provide useful information.
Your best options are to run their traffic through a Pix firewall for the session logging, use the first hop router inside the network that can provide Netflow export for analysis, or use a probe to monitor the traffic that can discern the indivdual flows. For the last two, ntop can analyze netflow of mirrored sessions to provide protocol analysis by src/dest IP, top protocols used, etc.
-Shannon

Can I set my macbook to install updates at a specific time? My internet is limited through the day but between 2am and 7am it is unlimited?

My internet is limited through the day and I want to know if I can set a specific time for updates to be carried out to make sure my macbook is working efficiently.

Yes. When you get a notification that an update is available, select "Try Tonight". That will constrain the update to occur between 2:00 and 5:00 AM.

How do I get Internet Explorer on my Macbook Pro?

I need to get on a website for work and it can only be run through internet explorer. Trust me, I know this *****, but I don't know how to get around it. So I need to find a way to get Internet Explorer on my Macbook Pro.

You run it through Windows or CrossOver Mac. The Mac OS X version of Windows Explorer doesn't work in 10.7 and won't be updated to do so or patch security holes.
(82649)

TS3798 I can't get wifi on my iphone even though my desktop computer can get the internet. I thought it was a problem with the modem so I got a new one ...but still the same problem (my computer gets internet but my iPhone cannot get wifi from it). PLEA

I was always able to get WiFi on my iPhone through my home computer. Then all of a sudden it went out (uses 3G network instead of WiFi). Sometimes it would connect back to WiFi for a few seconds then back to 3G. I then decided it was the modem so I got a new modem. Well, I have no problem getting internet on my home computer but cannot still get WiFi on my iPhone from my computer. What do I need to do - HELP!!

Thank you again.
Yes, it worked. First, I just replaced the all info. as before, the router IP also (Stupid) , not success.
So, I created the new network, then, the Router IP automatically showed up .
I think the old setting still there under my Airport station (so, 2 setting right now)?
Anyway, my iPad and iPod touch works well with the new wi-fi network.
Thank you very much.
I got this Airport Extreme from a friend who wen to Time Capsule, still have the box and serial No. but will not work for Apple Phone support.
I appreciate for your fast help.

Getting Internet traffic statistics through TC

Similar Messages

Maybe you are looking for