Getting Itunes sync errors for no good reason

Have an Ipod classic, 80 Gig and all of a sudden I'm getting the error "attempting to copy to the disk "__" failed. The disk could not be read or written to. Another error was "___ ipod" cannot be synched. The required folder cannot be found. Brought ipod to apple store and they claimed the hard drive was shot so they gave me a new one. Got home, tried to sync the new one with the same results at first. I switched the cord and it was able to sync but stopped at 753 songs and gave error that it was unable to copy songs to disk due to running out of memory. Somebody help me PLEASE!!

If you ever had the Norton firewall even as a demo you may have to use the Norton removal tool which you should find on the Norton site.
I have this link for it ( make sure it is OK for the version you had):
http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039?OpenDo cument&seg=hm&lg=en&ct=us
It's a bit of a sledge hammer to crack a nut. I used it once and had to do a repair install of iTunes to get my CD dives back.
If you haven't tried briefly disabling the Windows firewall as a test, try that. You might need to reenable iTunes.
It is odd if you are an administrator, as according to your diagnostics, iTunes doesn't think you are. Do you have another account you can try using?

Similar Messages

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

IPod Touch / iTunes sync error -50 on iMac, due to new upgrade for iPhoto

I have an iPod Touch, software version 3.0.
I have an iMac, on Mac OS X 10.5.8.
I am on iTunes version 8.2.1.
I am on iPhoto 09 version 8.1 (415).
Ever since Apple released it's latest iPhoto upgrade about 2 weeks ago, I have not been able to sync my iPod Touch with iTunes, and instead getting a 'sync error -50'.
Apple's phone tech support did not know what the problem was and recommended me to Restore my iPod, as well as re-install iTunes. This did not help.
After much aggravation, I found a discussion group addressing the fact that it might have to do with the latest version of iPhoto. So, in iTunes I unchecked the sync iPhoto option, and now the rest of the sync's worked (iCal, Address book, music, movies, etc).
Still, I am looking for a solution, as I do not find not syncing my photos a long term solution. Can I do this on my own, or does a solution have to come in the form of a fix from Apple?
I want my photos back on the iPod, and am very thankful for any tips/help (...hello, anyone from Apple reading this?).

I don't think any of the work-arounds are really valid or deal with the problem. My Mac Pro desktop computer is 2 years old, so the problem obviously has nothing to do with a computer being new. I also don't see how it can have anything to do with iPhoto. If I get this error and "QUIT" iTunes and reboot iTunes, the iPod syncs perfectly, even though no changes were made.
I actually bought a new iPod this week because I thought my old iPod was failing (due to these repeated errors). Imagine my horror when the brand new iPod had the same problem.
Hopefully someone can figure out what going on.

After restoring 120 Gig Ipod classic, Keep getting random Sync errors?

So, I was using a third party software called Media Monkey to tag some album art on my ipod. For whatever reason my the program kept closing out and crashing. Eventually it crashed so hard that it wiped my entire library of music. After some failed attempts to save my music by taking it off of the hidden ipod_Control folder, I gave up and restored it. After the restore, whenever I attempt to add music I keep getting random numbered sync errors (for example -50, -1303.-69,-53). This is only after I add about 3 or 4 gigs of space. (I tired re adding the music album by album and still have the same issue after only 2 gigs of space.) I have NEVER had a problem with this ipod before, it's not even 4 months old yet so i'm not sure what is going on here. I have called apple three times (all i'm told is if I want actually help and not articles that i've already used, I have to pay.) I have tired making it a disk drive but itunes still treats my ipod like it's an ipod and not a disk drive. Any help would be REALLY nice. Thank you for reading! I've also restore my ipod multiple times as well.

Hopefully it is only a filesystem corrupted by conflicting Apps.
Try to fix the iPod filesystem, using Properties->Tools->error checking.
Then Restore the iPod.
if then doesn't work, do the iPod Disk Diagnostics, as posted by tt2, it wont fix your problem , but helps in troubleshooting.
Good Luck!

DMVPN and %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) Error

%DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7)
I had pre-allocated tunnel ip's to remote spokes , some of them were implemented and put into production. Some of them got the config but the tunnel interfaces were left at shut.
Its because of this reason that the DMVPN HUB keeps getting nhrp request from one of the inactive spokes. Following is the sh ip nhrp extract :-
10.x.x22/32
   Tunnel0 created 00:02:58, expire 00:00:06
   Type: incomplete, Flags: negative
   Cache hits: 7
I just cant seem to find the spoke WAN ip to identify it. I tried debugs but just cant get it.
From HUB:-
Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
Nov 30 10:36:32: NHRP: Send Resolution Request via Tunnel0 vrf 0, packet size: 86
Nov 30 10:36:32: (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
Nov 30 10:36:32:      shtl: 4(NSAP), sstl: 0(NSAP)
Nov 30 10:36:32:      pktsz: 86 extoff: 52
Nov 30 10:36:32: (M) flags: "router auth src-stable nat ", reqid: 46113
Nov 30 10:36:32:      src NBMA: 20.x.x.x.
Nov 30 10:36:32:      src protocol: 10.x.x.1, dst protocol: 10.x.x.22
Nov 30 10:36:32: (C-1) code: no error(0)
Nov 30 10:36:32:        prefix: 32, mtu: 17912, hd_time: 360
Nov 30 10:36:32:        addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0, pref: 0 Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
So my question is , How do i find out the spoke wan ip , so i can do something about it. For now, its just filling up my logs on HUb router...not good ;-))

Hello Marcin,
If tunnel interface is shut no NHRP activity should be going, on top, in debugs you point the hub is sending resolution request, not receiving it.
Agree, I expected the same, but unfortunately this is not the case. Spoke does sent out NHRP requests even with Tunnel status as admin shut.
If your hub does not have NHS, it will not know where to send it's resolution request.
I am still on DMVPN Phase 1, so Spokes dont talk to other spokes yet.
Are you positive that there is nothing that is sending packets towards 10.x.x.22 on hub side (sniffer trace of classyfing ACL on "LAN")?
Other then a spoke, it cant be anthing, as the subnet is dedicted for tunnel interface's.
If you know it's not a misconfig and there is no traffic on hub side initiated to 10.x.x.22, try removing and adding full tunnel configuration. i.e. we want to make sure that crypto socket gets closed and restrated.
I can do this over weekend, but i am sure this is not going to fix the problem, reason being, that the HUB was setup before anything else and then we started migrating spokes from primary legacy gre tunnels to dmvpn tunnel as primary and legacy as a backup.
Guess, I am still looking for the answer...Is there a WAN acl that i can use to filter the successfully migrated spokes and log the deny message as in to know what remote wan ip carries along the tunnel ip of .22 or any other debug ??

I am getting an installation error for Adobe AIR

I am getting an installation error for Adobe AIR when I try to update Pandora and it will not allow Pandora to update to the latest version. I have gotten this same msg when I tried to updaqte a program that uses Microsoft server. The error msg says see author.

Hi ricky,
I would use highlight execution (light bulb on LabVIEW toolbar) to see exactly what AI Single Scan VI is causing the error. You could also use breakpoints on each wire right before the AI Single Scan VI is called so that you can turn highlight execution on to see if the call generates an error.
Another suggestion is to create a new VI and copy and paste all the VIs from your current VI to this new VI. This might correct a problem if the VI is corrupt.
Finally, you could use the AI Config, AI Start, AI Read VIs instead of the AI Single Scan. I doubt there is something wrong with the VI, it is morelikely a corrupt VI. Recreating the VI will morelikely fix this problem.
Anyway, hope that helps. Have a good day.
Ron

Getting run time error for multiple counter plan

Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
Srinika

Hi,
Please check reason for update termination in Transaction code SM13.

I can't get itunes to scan for media. What can I do?

I just deleted all the songs in my iTunes for Windows library because there were so many copies of songs and many false links. But when I tried to get iTunes to scan for media anew, clicking on the scan button, nothing happened. In frustration, I finally removed the entire program and reinstalled all over again. But still, nothing happens when I click on the "Scan for Media" button. Can anyone help me? Also, but of less importance, I'd like to tell iTunes where to look for my media, if I can. The scanning is so important because I just bought an iPad and need to sync it with my PC's media contents.

File > Add Folder to Library, and point it at a folder of music.

How to get the last error for while loop?

How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time .

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Can't get itunes to work for windows xp 64 bit

I can't get itunes to work for windows xp 64 bit. It won't even download.

These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

Getting JPEG Library Error for Corrupt JPEG Data using CS5

After recently upgrading to CS5 I am getting JPEG Library Errors for corrupt JPEG data. I have my old PC still in use that uses CS4 and does not generate these errors when accessing the same site. Could someone please assist me in how to get rid of these errors using CS5? I can't find help out there anywhere for this!
Thanks in advance!

You could use Photoshop's Image Processor to open all of your jpegs in a given folder, make a slight tweek and resave them in the hopes of cleaning out any errors that DW is hitting. It's worth a shot maybe.
1. In PS go to File > Scripts > Image Processor
2. For Step 1, browse to a folder in your site with jpeg issues
3. For Step 2, choose save in same location
4. For Step 3, choose Save as JPEG and check Convert File to sRGB
5. Click Run
This will create a sub folder called JPEG with the images resaved there. You can drag them into the parent folder to replace the originals.
If you haven't already, make sure to report the bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
At least the right people will be made aware of it then and if it's common enough to trip whatever quantity/user reports system they use, it would get included for repair.
I honestly don't think it's a "bug" per se, since the forum isn't absolutely flooded with the problem.

Still getting itunes match error code 4001

Still getting itunes match error code 4001. Have tried the a/lt/option delete to trick, have reinstalled, etc. Nothing works. Anyone know of a fix?

iTunes Match get error -3231 - https://discussions.apple.com/message/22682187 - read all posts, not just the "solved" one.

Has anyone had an iTunes sync Error code 554?

Has anyone had an iTunes sync Error code 554?

On the Windows version of iTunes, error -54 means a general IO error occurred that can be caused by many different things: a file is corrupt, a file is locked, or an .m4a file could not be converted to a lower bit rate.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

Getting Itunes sync errors for no good reason

Similar Messages

Maybe you are looking for