Getting "Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452)" error after upgradating to siebel Open UI 8.1.1.11

Hello Team,
We have upgraded from Siebel 8.1.1.3 to Siebel Open UI 8.1.1.11.
But after up-gradation we are getting the below error in "My Account Opportunity" View.
We detected an Error which may have occurred for one or more of the following reasons:
Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
Thanks,
Tirupati Nanda
Mob:-9742404115

Similar Messages

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Opportunity - Access denied.(SBL-DAT-00284) Error

I am getting error as Access denied.(SBL-DAT-00284) when I am trying to create a new opportunity record.
I checked Roles and access profile. Setup looks correct there. Any idea of issue. Thanks VK

I was access profile issue. I resolved. Thanks VK

I have an app on my phone that has a glitch.i want to get rid of the app so that i can re install it,but when i re istall,it comes from the cloud and still has the glitch. how do i remove an app from my cloud

I have an app that i want to get out of my cloud,can i do this ????? It has a glitch and wont work and when i come to re install, it comes from my cloud along with the glitch. Can anyone help ?

When you tap the iCloud download symbol it's downloading a fresh copy of the app from the App Store, not from your iCloud account. (Your previous purchases aren't stored in your iCloud account, they are stored in the App store and can be redownloaded from there.)
If the app still has a glitch, try contacting the app developer. Perhaps there's a problem with the app running with iOS 7.1.

Getting unknown error after upgrading iTunes (-3212)

Has anyone else gotten this error after last upgrade? I only get it when trying to connect to the store and it says it check my internet connection and try again. I have an internet connection and I've tried repairing/reinstalling iTunes.

I am having the exact same problem. I checked what version of Airpot Utility I am using and it is 6.3.
I checked for any updates and there was one for Front Row. The update said it would fix problems with ITunes also. But still no luck.
Can anyone help?
Thanks

Does anybody know how to stop emails that come from spamers selling direct TV to mortgages? I've blocked every feature i know and they still get thru. they never show the "to" email address it's always blank. It's not on my email server either. These

i've never owned a phone that i've had so much trouble from spammers. I've tried every trick i know and yet they still come in droves usually in the middle of the night but also a few during the day. They range from mortgages to home warranties to dating. I've blocked everything including my hotmail and microsoft live accounts from receiving mail. Still, they come. They are not coming to my regular PC and they never have a "to" email in the address field like my normal business emails do. Any information is appreciated before i get an I phone!

Hi lbadek
I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to get the values from table region and how to set

Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
Hanimi

Hi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com

HT1688 I have pictures on my camera roll that when I try to click on them the only thing I get is a white screen. I took about 10 pictures on the same day and in the middle of all the pictures it has about 5 that come up white when I try to click on them.

I recently took pictures at a family outing and all the pictures appear on my camera roll but when I click on about 5 of the pictures they all pull up as a white screen even though I can see the picture on the camera roll. How do I get these to pull up when clicked on ? I have completely shut the phone off twice thinking this would reset pictures but it has not made a difference. What can I DO??

My sister's 5s is having the same issue since yesterday.
Neither resetting via holding home+power buttons helped, nor the "reset all settings" in the settings. The only option left is erasing the iPhone and setting it up as a new phone ( or restoring from a backup?)

Script Gets Error After Upgrading to Snow Leopard

Hi, everyone - I have several Applescripts I'm running that mostly import Entourage emails into Filemaker Pro (retrieving data from forms submitted) - everything worked fine until I upgraded to Snow Leopard recently! I need to get this working ASAP since a client is waiting on it and I have no idea what I need to change to make it work! I'm getting the following error now upon the import of the 1st email:
error "Can’t get text item 1 of \"\"." number -1728 from text item 1 of ""
I will post the script below. ANY help so greatly appreciated!!
- Jacki
=============
activate application "Microsoft Entourage"
-- get messages from Entourage
tell application "Microsoft Entourage"
set mail_count to count message of folder "Mailing List" of folder "Judith's Site" of folder "OO Mail" of folder "Inbox"
set query_number to 0
if mail_count > 0 then
repeat with i from 1 to mail_count
try
set subject_field to subject of message i of folder "Mailing List" of folder "Judith's Site" of folder "OO Mail" of folder "Inbox"
set the_months to "January February March April May June July August September October November December"
set message_date to time sent of message i of folder "Mailing List" of folder "Judith's Site" of folder "OO Mail" of folder "Inbox"
set mess_year to year of message_date as string
set mess_day to day of message_date as string
set day_count to count characters in mess_day
if day_count = 1 then set mess_day to "0" & mess_day
set mess_month to month of message_date as string
repeat with x from 1 to count words in the_months
if mess_month = word x of the_months then set month_count to x as string
end repeat
set monthnumbercount to count characters in month_count
if monthnumbercount = 1 then set month_count to "0" & month_count
set entry_date to month_count & "/" & mess_day & "/" & mess_year
set full_name to display name of sender of message i of folder "Mailing List" of folder "Judith's Site" of folder "OO Mail" of folder "Inbox" as string
set word_count to count words in full_name
set first_name to word 1 of full_name
if word_count = 1 then
set last_name to ""
else if word_count = 2 then
set last_name to word 2 of full_name
else if word_count = 3 then
set last_name to word 3 of full_name
else if word_count > 3 then
set last_name to word 3 of full_name
end if
set message_body to content of message i of folder "Mailing List" of folder "Judith's Site" of folder "OO Mail" of folder "Inbox"
end try
set paragraph_number to count paragraphs in message_body
if (subject_field is not "") and (subject_field contains "E-mail List Form Submission!") then
set query_number to query_number + 1
if my importdata(entrydate, first_name, last_name, message_body, paragraph_number) is 0 then
display dialog "failure at message number " & i
end if
end if
end repeat
end if
end tell
tell application "FileMaker Pro"
with timeout of 1200 seconds
if query_number = 0 then
display dialog "There were no new responses."
else
display dialog "There were " & query_number & ¬
" records added to the database." buttons {"Cancel", "Okay"} default button "Okay"
end if
end timeout
end tell
on importdata(entrydate, first_name, last_name, message_body, paragraph_number)
set old_delimiters to AppleScript's text item delimiters
set AppleScript's text item delimiters to {": "}
--specify Filemaker and corresponding Web site fields names {Filemaker,Web}:
set field_names to ¬
{{"FULL_NAME", "realname"}, ¬
{"EMAIL", "email"}, ¬
{"ADDRESS", "Address"}, ¬
{"CITY", "city"}, ¬
{"STATE", "state"}, ¬
{"ZIP", "zip"}, ¬
{"COUNTRY", "country"}, ¬
{"PHONE", "phone"}}
set count_fields to count field_names
--import data
activate application "FileMaker Pro"
tell application "FileMaker Pro"
open "Macintosh HD:Users:jacki:Documents:Judith Matz:Mailing List - Judith.fp7"
set this_record to create record
go to this_record
set data cell "FIRST" of this_record to first_name
set data cell "LAST" of this_record to last_name
set data cell "ENTRY_DATE" of this_record to entry_date
set data cell "STATUS" of this_record to "edit"
repeat with current from 1 to paragraph_number
set current_paragraph to paragraph current of message_body
repeat with i from 1 to count_fields
if first text item of current_paragraph is item 2 of item i of field_names then
set this_field to item 1 of item i of field_names
set field_data to second text item of current_paragraph
set data cell this_field of this_record to field_data
exit repeat
end if
end repeat
end repeat
end tell
set AppleScript's text item delimiters to old_delimiters
end import_data

The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

I'm getting a cwinstr error after upgrading from labview 7.0 to labview 2010

Hello
recently upgraged a PC from Labview 7.0 pro to Labview 2010 pro. Now I can not open a calibration executable we been using for a xantrex xfr power supply (unfortunately I don't have source code). The only error I get is "cwinstr-can't load program" pop-up when trying to run the executable. The calibration SW will run on multiple platfroms, Win 95, Win 200 0 and XP and this is the first time getting this error. The calibration SW ran fine until the Labview 2010 install. My question is does LV 2010 change the registry files when loaded? Visa and MAX still run fine on this PC and were loaded when LV 7.0 was installled. I know the calibration SW uses the VISA drivers so this is what's confusing. i don't want to downgrade back to LV 7.0 unless I have to.
Thanks

Hello Tanya,
I'm a little confused here. i only started having issues with the executable (it ran previously with the visa drivers from 7.0) after I loaded LV2010. After the install, the exectuable started giving me the cwinstr error. As best I can tell, this may be an activex issue, but since I only have the executable it hard to tell.
My question id do i have to install both labview 7.0 in addition to labview 2010 on the pc. Fom the the readme file, it looks like Labview 2010 won't support certain vi's older than 8.0. But since I'm dealing with an exectuable only here, I thought I should be able to open it at least.
So instead of updating the visa drivers, should i re-install the old visa drivers (Ni-Max) for 7.0 instead? would this even work without removing LV2010.
Thanks Again

The application "Finder.app" can't be opened. Anyone getting this error after upgrade?

Upgraded to new OS version and getting "The application “Finder.app” can’t be opened."
The icon in the tray has a small black dot under it. Not sure whether that is relevant

Hi ..
A Safe Mode boot deletes some system caches that may help after an OS X upgrade.
Top left corner of your screen click the Apple  > Shut Down.
After your Mac shuts down, wait 10 seconds, then press the power button.
Immediately after you hear the startup tone, hold down the Shift key. You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator.
Once you are in Safe Mode, go back to the Apple  menu. From the drop down menu click: Restart
Then try the Finder.
About Safe Mode.

I'm getting a 1048 error after upgrading MATLAB.

Hi-
I'm hoping someone might be able to help me. I have a VI that I've been using w/ no problems that has several MATLAB script nodes. Recently, MATLAB was upgraded on this machine from 2006b to 2008a. When I try to run the VI now, I get a 1048 error when the MATLAB script tries to execute. (I'm not clearing any variables or giving them the same names as existing MATLAB functions.) I'm currently running LabVIEW 8.6. Any ideas? I've tried just shutting down LabVIEW & restarting w/ no luck. Thanks in advance!
Erin

Hi Erin,
Usually ActiveX registration issues will cause an error 1047. But you could try reregistering the ActiveX components.
Take a look at the following KB: Why Do I Get Error 1047 When Trying to Use The MATLAB script node in LabVIEW?
Let me know if this helps at all.
Justin Parker
National Instruments
Product Support Engineer

If I get a Helix now, can I replace the chip with a Haswell when that comes out?

Someone on the Lenovo Facebook mentioned that it would be possible to put a Haswell chip in an existing Lenovo convertible, and that doesn't seem right to me because it takes a different slot. Is this legit?
Solved!
Go to Solution.

You can't upgrade the CPU of ultra book, x series or tablets. So what the person said about putting a haswell chip is incorrect.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Getting "Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452)" error after upgradating to siebel Open UI 8.1.1.11

Similar Messages

Maybe you are looking for