Getting Kernel32.dll procedure entry point errors when trying to load NI-IMAQ v2.6.1

Here is a copy of what appears in the Error Log:
Application popup: setup.exe - Entry Point Not Found : The procedure entry point GlobalGindAtomA could not be located in the dynamic link library KERNEL32.dll.
I have also recieved the following:
Application popup: autorun.exe - Entry Point Not Found : The procedure entry point TerminatePsocess could not be located in the dynamic link library KERNEL32.dll.
and:
Application popup: autorun.exe - Entry Point Not Found : The procedure entry point IsCadReadPtr could not be located in the dynamic link library KERNEL32.dll.
FYI - software loaded onto a IDENTICAL machine (hardware) w/o difficulty.

Is the other machine "IDENTICAL" in terms of operating system, software, etc? Does the error occur when trying to acquire an image in Measurement & Automation Explorer (MAX), as well as in your programming environment? Have you tried reinstalling the NI-IMAQ driver? Has this system always exhibited this problem, or are these errors a new phenomenon?
Best regards,
Dawna P.
Applications Engineer
National Instruments

Similar Messages

Please Help.. have spend hours unistalling itunes on my pc and redownloading itunes and every single time i am getting a "The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located n AVFoundationsCF.dll

ugh...can anyone help me reload itunes on my pc...itunes 10 worked fine but I uninstalled it when i was having problems loading itunes 11...I am not sure how to correct my procedure entry point error...i have used my uninstall programs on my control panel numerous times to unistall my itunes and quik time downloads and every single time i shut down and reinstall them I am getting this same procedure entry point error...is there something else i can do ??? ugh !!!

See Troubleshooting issues with iTunes for Windows updates.
tt2

Tried to update iTunes, after downloading I get the message: procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ??

Tried to update iTunes. After downloading I get this message: Procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ?? What does that mean?!

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

Since iTunes update my PC will not see other devices keep getting message The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll, how do I get my other devices to be found?

Since iTunes updated my PC my other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I downloaded iTunes onto my laptop and kept getting an Apple Application error so I also downloaded that and now I'm getting a Procedure Entry Point error as well as Error 7 (Windows Error 127) and I have no clue what to do. Can anyone help me?

I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?

iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Entry Point Error when starting WL

Hello,
I am runnning WL 5.1 on Windowa NT. When I start WL as a NT service a got this error:
WLService - Entry Point Not Found
The procedure entry point ResolveClass could not be located in the dynamic link library javai.dll
Despite this error, I got to start WL. But I would to know if this behavior affect my WL, if so how ?
Thanks in advance.
Francisco Manzo

Tshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo

Error When trying to load master data 0material

Hi,
I got the following error when trying to laod 0MATERIAL master data
"value '000000000004343434 ' for characteristic 0MATERIAL is in external format "
"0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
Can anybody help me in resolving this issue.
Regards

Hi,
Run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Hope this helps
Provide points if it does.
Regards
Lalan

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Bw problem/error when trying to load data

hi experts i suddenly have this issue when trying to load data anywhere in my bw system (psa,ods,infocubes) i get the following abap runtime error:
SNAP_NO_NEW_ENTRY
runntime error,short dump could not be written
and bellow that it generally says that SNAP is full and i need to create more free space
any suggestions what i should do?
ps.i ve tried the re-organize option and no luck, i need to take more drastic measures
thanks

check the below thread...
[SNAP_NO_NEW_ENTRY;

Your profile option does not allow automatic numbering error when trying to load BSA

We are getting this error while trying to load BSAs. The profile option is set to always at the responsibility level,
The same code and settings were tested in lower instances and it went through fine
Document sequence is set correctly.
Any inputs to resolve this issue would be greatly appreciated. It has stopped out production Data conversi
Thanks
R

Hi Winsky,
Ensure Profile: Sequential Numbering must be set to: 'Partially Used' at app level
Refer the following note and check whether it helps:
I Get The Error: Your Profile Option Does Not Allow Automatic Numbering. [ID 560388.1]
In Order Import stuck record with error "Your Profile Option Does Not Allow Automatic Numbering" [ID 1083645.1]
Best Regards,

I get aq run time error when trying to load the latest version of iTunes. Help.

I get a run time error when attempting to install the latest version of iTunes & now cannot access iTunes. Can anyone help me?

Hi jalbany,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Get error when trying to load Grid editor in EPMa for my Custom 1 Dimension

Hi,
Would anyone know why I get the the below error when I try to edit my C1 dimension in HFM:
Error Message: Error Loading Namespace for id : awb.grideditor
All EPM Services are started.
Regards

Alo why would you get the below error:
There was a communication error processing the data.URI: http://address../awb/dimeditor.getChildNodes.do

Getting ora-01092 and ora-00600 error when trying to startup database

hi friends,plz help me i am in serious problem i dont know what happen to my database oracle 11g R2 when trying to startup it
its showing the below error
SQL> startup
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 7482626048 bytes
Fixed Size          2214416 bytes
Variable Size          4697622000 bytes
Database Buffers     2751463424 bytes
Redo Buffers          31326208 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00600: internal error code, arguments: [12620], [6], [7], [], [], [], [],
Process ID: 18088
Session ID: 96 Serial number: 3

This seems to be a Jumbo issue. Either you have to open a Service Request(SR) to oracle or you have to uninstall and again install the oracle DB to solve this ISSUE
Regards
cks
Edited by: 874782 on Jan 17, 2012 2:58 PM

Error when trying to load jar file (loadjava)

I have been struggling with this issue for a few days. I read all the old threads and solutions online but none of them worked. I wrote some java stored procedures and have been trying to load the required jar files. The error message I keep getting is this:
ORA-29532: Java call terminated by uncaught Java exception: oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures occurred during processing. Check trace file for details
I have tried to load them using Enterprise Manager Console and the following:
call dbms_java.loadjava(' -force -resolve
c:\javacog\cognosClient.jar', ' -resolver "((* PUBLIC) (*
SYS) )"')
Any ideas? We are using Oracle 10gr2, and trying to load Cognos 8.3 SDK jar files. According to Cognos, Java 1.4 is supported.
Edited by: user10406501 on Oct 8, 2008 2:26 PM

Sorry to respond to an old message, I was just looking for the solution for the totally different problem.
Key word 'Cognos' got me here.
I've menage to load Cognos SDK onto Oracle 10.2.0.2 on Windows XP.
I've used simple loadjava script. After that it requires some additional GRANTs, and it works.
If you still are looking for the solution for this problem, respond to this message, and I'll post the scripts.
Thomas

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Getting Kernel32.dll procedure entry point errors when trying to load NI-IMAQ v2.6.1

Similar Messages

Maybe you are looking for