Getting kicked out of an active session

i have windows server 2008 r2 with 5 user TS CAL installed. the server has the latest updates. i was remoting to the server as administrator and suddenly got kicked out when the other user logon to the server physically as the administrator. i wasn't expecting
this as i expect there should be 6 maximum consecutive sessions available. can someone explain why and what went wrong?

Hi,
Did you both log on using the same user account?  By default when the second person logs on they will take over the first session.  It is preferred that each person log on using a unique account, however, if you really need to allow multiple sessions
for the same user account you can set Restrict each user to a single session to No in RD Session Host Configuration (tsconfig.msc).
Please note that RDS is not licensed concurrently.  It is either per unique human (Per User) or per unique PC/iPad/Mac/etc. (Per Device).  In your case you are using Per User.  Because of this
there is no limit to how many concurrent sessions are logged on from a licensing perspective.
Thanks.
-TP

Similar Messages

  • User are getting kicked out of SNP planning book

    Hello Experts
    I hope you can help me out here!
    From time to time we are experiencing strange issue for SNP user's .. User are getting kicked out from SNP planning book
    Please help us.
    Thanks
    Ramesh

    Hi Ramesh,
    As far as I know, users should not get kicked out unless someone terminates their session.
    Even if they lock some data and the same data is needed by some job, it's the job that would fail showing data lock. Similarly, if some other uses tries to access the locked data, the user who is accessing later would face the issue of not being able to go to edit mode.
    It's possible to write programs that could specifically do this work of kicking out users before we run batch jobs, but let me assume that this is not the case with you.
    One possibility is that there is issue in livecache and so users are not able to access livecache or get kicked out from their active session (e.g. your log area gets full, then users would soon get kicked out after seeing the system hanging initially). This you would need to check at the time when users face issue. This would also mean that other processes that need livecache should also fail e.g. GATP, or SNP planning or PPDS planning related jobs would fail at the same time.
    If you could share exactly what error message the users are seeing, that could be helpful in resolving the issue.
    Thanks - Pawan

  • When I open FaceTime I get kicked out due to "An internal error." Help please?

    I'm getting kicked out of FaceTime. Can anyone help?

    Hello BrandonVonk,
    The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
    Hope this helps,
    Siana A.
    Application Engineering
    National Instruments

  • Is anyone else getting kicked out of iMessage since the iOS 7 update

    Ever since i updated to iOS 7 I keep getting kicked out of iMessage.  It doesn't even let me type a message?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Since I upgraded my Ipad2 with IOS6, i keep getting kicked out of Safari after I am in the middle of looking for something and on Ebay it continually kicks me back to the first item if I click to see a picture, say after I am 150 items down.  Even CNN too

    Since I upgraded my Ipad2 to IOS6, I keep getting kicked out of Safari after I am in the middle of searching for something.  Also, Ebay kicks me back to first item if I click on an item, say number 153 or 642!  Very annoying.  Even CNN kicked me out back to Ipad home screen last night!  How do I make it stop???

    My question is this:
    What is the best way of getting the pictures out of the iPhoto Library? I
    Select the photos you want out and export them as JPGEs - kind = current for the current edited version - kind = original for the original
    f I get access to the original folders within the library by right-clicking any photo and then being able to browse inside the library, am I going to have any problems if I copy or move those original pictures directly to a folder outside of the iPhoto Library?
    Copying photos out will not be a problem if you make no errors - for me that is not a good bet - it is best to stay out of yoru iPhoto library
    Would it be better to export the pictures?
    Yes
    Does exporting using "current" under "Kind" give you the original more safely?
    No - it gives you the current version which may be the original if no changes have been made or will be the current edited version if edits ahve been made
    Also, any suggestions on how to best have photos OUTSIDE of an iPhoto library organized so that iPhoto can reference them, but your backup is also organized?
    In the iPhoto preferences un check the advanced preference to "copy imported items to the iPhoto library"
    HOWEVER - this is not recommended - it makes importing more complicated, deleting more complicated and makes replacing a hard drive or going to a new computer much more difficult - and it puts you totally in charge of your original photos - being sure that they are there and do not get moved
    I'd like to have my photos organized by date in the backup as well, so that I don't have to backup all my pictures every time I add new ones, just add the latest to the backup drive.
    Finally, any suggestions on what to do with pictures that you scan so that they appear by the date they were taken as opposed to the date they were scanned? Is there a way to modify the date of the photo info?
    Select the photos in iPhoto and use the batch change command under the photos menu - the tiem and date option
    LN

  • Sharepoint 2010 User getting kicked out of share point multiple time , can some one help me what coule be reason

    using SharePoint 2010 > under marketing > task, user getting kicked out of share point multiple times. don't know the reason, does any one have any idea,  learning about SP,  any help will be appreciated.

    try this one:
    http://sharepointsolutions.blogspot.com/2008/06/how-do-i-make-our-sharepoint-site-stop_17.html
    if fixed the issue fine other wise could you please check the ULS logs/ application ?IIS logs at the same time user kicked out.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Agents getting kicked out of Talking status to ready status on Queue calls

    Hello All,
    We have an odd problem. Some of our agents are complaning that they are randomly getting kicked out of talking status and going into a ready state while on a queue call.
    For example an agent will be on a queue call and talking and UCCX will put them into a ready state while having recieved a call from the queue and still on that queue call.
    On the agent phone there are two extensions (7945 IP Phone). Extension 2110 which is the queue number and 2500 which is a extesnion that is shared on several diffrent phones by the agents. 2110 is set to 2 calls and set to 1 as a busy trigger. 2500 is set to 4 calls and busy trigger of 2. Both extesnions are not part off any hunt groups and 2500 is the only one that is on several diffrent phones.
    The agents do use extension mobility to sign into the phones since they rotate desks. We are running the enhanced version of contact center express System version: 8.5.1.11003-32.
    The agents are using the cisco desktop agent.
    Thanks for any help or advice,
    Dan

    Hi Dan,
    Unsupported Configurations for Agent Phones
    The following configurations are not supported for agent phones:
    •Two lines on an agent’s phone that have the same extension but exist in different partitions.
    •A Unified CCX extension assigned to multiple devices.
    •Configuring the same Unified CCX extension in more than one device profile, or configuring the same Unified CCX extension in any combination of device profiles and devices. (Configuring an Unified CCX extension in a single device profile is supported.)
    •In the Unified CM Administration Directory Number Configuration web page for each Unified CCX line, setting Maximum Number of Calls to a value other than 2.
    •In the Unified CM Administration Directory Number Configuration web page for each Unified CCX line, setting Busy Trigger to a value other than 1.
    •Configuring a Cisco Unified IP Phone with Secure Real-Time Protocol (SRTP) for use in silent monitoring and recording.
    •No Cisco Unified Communications Manager device can be forwarded to the Unified CCX extension of an agent.
    •The Unified CCX extension of an agent cannot be configured to forward to a Cisco Unified CCX route point.
    •Use of characters other than the numerals 0–9 in the Unified CCX extension of an agent.
    •Configuring the Unified CM intercom feature.
    •Configuring the hold reversion feature.
    Agents are not moved to "Not Ready" state by "Dropped Event" in workflow in case the agent got reserved for next call.
    Reference:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/release/guide/uccx851rn.pdf
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • Why am I getting kicked out of every app on my ipad2

    For the past few days any app I go into I get kicked out of. I thought it was my wifi at home. But it does it every where. This has happened before the upgrade and after the upgrade to 6.0.1.  I have also turned it off and back on several times.  Just to enter this took my 30 minutes of trying before getting kicked out

    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • Getting kicked out of apps

    I keep getting kicked out of my apps when using my IPad...any suggestions for a resolution?  Thank you.

    HOw much empty space do you have on your device? If it's trying to download or buffer the video and there's not enough  local storage then it may kick up an error

  • I have taken all measures to clear my iPad but still getting kicked out of the internet and sent to my home page. What next?

    I have taken all recommended measures to clear my iPad Air but, I still get kicked out of the internet. Problem seems to be more frequent as time passes

    I don't know what you mean by "all recommended measures."
    Please tell me that it has NEVER been jailbroke.  If that's the case, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • W510 Wireless Adapter: getting kicked out of most wireless networks

    Hi Everyone,
    I'm running a W510 with Windows 8 on it. I have an extremely annoying issue with my wi-fi network network card and I have no clue where it's coming from.
    The wi-fi networks at my home and office work perfect and I haven't had a single issue with them. I recently started travelling a lot and tried using wi-fi on various locations such as open wi-fi on airports, secured networks in hotels, cafes, guest homes etc. Most of them are not workable. Here's what's happening:
    I can usually connect the first time I try, but after a few minutes, and hour top I get kicked out of the network or end up with "Limited" access. When I try to reconnect the it goes into and endless "connecting" state. Trying to disconnect hangs the pane and no actions are possible until I:
    1. Restart the explorer.exe process, which it "Not responding"
    2. Disable and Enable the wireless adapter though the Device Manager
    After that in case of some networks I can connect again for a few minutes, but then I all repeats all over OR I cannot connect back at all.
    I have tried using A LOT of networks in various places, and I'd say with about 80-85% I experience the described issue.
    I case of some of the networks I had a chance to connect by wire and they were working perfectly. Often I have other people around with me and of course I'm the only one facing the issue, it's not that I have really back luck for wi-fi networks. Plus my phone connects to majority of them without issue.
    In many cases when I switch networks I need to manually run ipconfig /renew and ipconfig /flushdns, before being able to connect to anything.
    The wifi adapter is a Intel Centrino Ultimate-N 6300 AGN on a Lenovo W510. The driver version is 14.2.1.3. I've seen 15.x version available for download from both Intel and Lenovo sites, but when trying to install it I got info, that I already have a newer version of the driver.
    Uninstalling the driver and letting windows reinstall it does not solve the issue.
    I ran out of options on what to check and how to debug this further. What are your thoughts on this?
    Thanks,
    MikeZyc

    Hi, MikeZyc
    I've seen this issue on many machines running Windows 8 with Intel wireless adapters. One fix that has worked more often than not is to navigate to Control Panel ► Programs and Features and uninstall the Intel Management Engine Driver. This driver seems to cause the wireless connectivity to get lost or not connect at all in Windows 8. Try uninstalling that, then restarting the computer and see if any improvement is made.
    Best of luck,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • I keep getting kicked out of iphoto

    I get into iphoto.  I see my photo files.  And then, after about 30 seconds, I get kicked out of iphoto and get a new window that shows a Problem Report for iPhoto.  Any idea what is happening?  Why?

    Very often a corrupt iPhoto database or a corrupt photo.
    http://support.apple.com/kb/ht2638
    Take a backup of the iPhoto library before attempting any repair.

  • I keep getting kicked out of my apps!!!-Don't know if anyone else is!

    Lately, I've been getting kicked out of my apps at weird and very bad times. It's worse when I'm playing games and then suddenly I'm at my home screen. Has anyone else had this problem and know how to solve it?

    Have you tried the standard fixes:
    - Reset:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup via iTunes
    - Restore to factory defaults via iTunes.

  • I am getting kicked out of apple tv. Why am I getting kicked out of programs on Apple TV?

    Why am I getting kicked out of a program on Apple TV?

    Please provide more info on your issue.

  • I keep getting kicked out of Safari when online. Is there a way to reinstall Safari?

    I Keep getting kicked out of Safari when online. Is there a way to reinstall Safari?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    No data is lost due to a reset.

Maybe you are looking for

  • Need a Advice for move from  peoplesoft to SAP BI

    Hi Experts, I am working as a peoplesoft Technical consultant in a MNC past 2 yrs . I want to change my domain to SAP BI. I need a suggestion. SAP BI Training already completed. But in my it's not possible for change so please advice how i will highl

  • New IT Resource based on old IT Resource

    Hello, I would like to create a number of IT resources all based on the same connector. So basically, I want the new IT Resource to inherit all of the provisioning tasks from the original IT Resource (but I just want less fields to be assigned). Is t

  • Deletion of Source system

    Hello, I need help in deleting any links that exist for an old R3 system. We have migrated our source R3 system which was called SP1 to another system called SP2. Now we have datasources, DTP and update rules pertaining to the old system that we woul

  • Times Ten Connection Problem.

    error connecting to DSNODBC Error 'S1000', TimesTen Error 4053, ODBC rc -1 ERROR in TTConnection.cpp, line 220: TTConnection::Connect() -- while connecting to driver [TimesTen][TimesTen 7.0.3.0.0 ODBC Driver]Internal error: Library mismatch. Expected

  • OWB10gR2 where can we define HINTS in the code

    Hi, Where is it possible in OWB 10gR2 to define/remove hints? Regards Maurice