Getting loads of e-mails daily

Hi folks,
Appreciate if this is not the right forum for this question, but I am getting litterally hundreds of e-mails every day from this forum (of which I am a member) of what looks like notifications and updates to everyone else's questions on APEX.
Don't know if anyone else has experienced this trecently, or more importantly know how to ensure that I only get notifications of my own posts.
Thanks in advance.
Graham.

I think you have "Watch this forum" on. On the main Application Express forum page click on "Stop Watching Forum" at the top, with the visor picture.
Greetings,
Rutger

Similar Messages

I keep getting loads of junk mail, how can I filter it out

I still get loads of junk mail, I think I am using the filtering correctly, is there an app out there that can help to cut it out. It just clogs up my mail and mail does not seem to learn what is junk mail and what isn't.

The next item of junk mail you receive, go to the Mail menu bar click Message / Mark As Junk Mail.
From the Mail Help viewer...
To change the junk mail filter:
Choose Mail > Preferences and click Junk Mail.
Specify which actions Mail should perform when junk mail arrives:
When you want to verify what Mail is identifying as junk mail, select the “Mark as junk mail, but leave it in my Inbox” checkbox.
When you are sure the filter is accurately identifying junk mail, select the “Move it to the Junk mailbox” checkbox.
To set up other actions, select the “Perform custom actions” checkbox and then click the Advanced button. In the dialog that appears, click Add buttons to add conditions and actions. To remove a condition or action, click its Remove button.
NOTE:To use the junk mail database when identifying junk mail, make sure “Message is Junk Mail” is one of the conditions (it’s specified by default). Otherwise, Mail uses only the conditions listed to identify junk mail.
Indicate the types of messages that don’t need to be evaluated by the junk mail filter. Typically, these are messages from senders you know.
To include your ISP’s junk mail detection in the filter, select “Trust junk mail headers set by my Internet Service Provider.”

After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

Firefox will not load talktalk web mail. ihave to keep reverting to 3.16 to get the service i am familiar with

i am and have used firefox for some considerable time and am abig fan!when fire fox 4 was introduced i tried it out and was impressed with the uprated performance.BUT at age 70 was introduced to computers and internetby.my bro-in-law same age was computer literate and set up my system with tiscali.it was stable and if i got into trouble because we both ran XP we could communicate despite living 70 miles apart.i for my part ran tiscali web mail service because it was clear and enabled me to keep my various interests in folders and was simple. i loaded firefox 4 but it would not load the web mail. i reverted to 3.16 and my webmail service loaded and i was able to carry on despite you system constantly imploring me to upgrade to f-f 4.unfortinately my bro-in-law died a year ago and I entered into a sevice with PC advisor published by "AGORA business publications" it was whilst i was trying to implement some of their tweeks to make XP run in concert with windows 7 from a dvd called "windows advisor" when up popped firefox 5 so i thought i would give it another go BUT same result in box quote "you have undefined new mails in your in box " how do i get them out? sorry but at 78 its past my bed-time!

Apparently TalkTalk mail will work with Firefox 4 and Firefox 5 ''if'' you set the browser to ''lie'' to TalkTalk mail by saying that you are still using version 3.6.
You can find the instructions for that in a post on the TalkTalk forums: [http://www.talktalk.co.uk/forums/showthread.php?t=185113#post2452787 Firefox 4 & TalkTalk webmail - Forums].
Note: when you open about:config the first time, it will display a warning message that you should be careful with the changes you make. That's definitely good to bear in mind.
Does it work?

Constantly getting "Loading" messages when trying to open mail

Constantly getting "Loading" messages when trying to open messages within "Mail." Funny, these appear to be messages sent to my .mac account. Apparently, I am able to open gmai.com messages. Any advice.

What does the error message say? (Precise text, please.)

I have just d/loaded FF4 and now I can't get into my e mail account.

I am with Sky broadband and since d/loading Fire fox 4 I have not been able to get into my e mail. When I go to log in, it tells me that i have entered the wrong details. This is a real pain as I am in business and I need my e mail.

All email accounts have a password. If you do not know yours I suggest you contact your mail provider and ask them for assistance.

Load balancing outgoing mail with 3 outgoing servers

We are trying to balance our mail out with 3 separate mail servers from our incoming server. Our organization sends alot of mail and we wanted to balance it with 3 outgoing SMTP servers. We have them all working, in the zone for the primary DNS and incoming mail server. And we can get mail to go out on the three servers, BUT and this is a problem if the mail includes any messages to the network (hence the incoming server) then the SMTP servers complain they cannot find it and give a error message about not being able to connect to deliver any local mails out of the bulk mail we send. Any ideas how to get the SMTP to see the incoming mail server (which is the DNS server for network) and deliver mail to accounts on the network? Maybe we are doing something that OS X SNL server cannot do? Any ideas.
I will post the error message later but I need to leave for meeting for now.
Thanks
Russ

Here is error message we get:
Mar 17 21:34:45 mailout1 postfix/smtp[32307]: connect to mail.vineyardil.net [173.161.44.97]:25 Operation timed out
Mar 17 21:34:45 mailout1 postfix/smtp[32307]: DE90A1AF591: to =<[email protected]>, relay=none, delay=23732, delays=23701/0.01/30/0, dsn4.4.1, status=deferred (connect to mail.vineyardil.net [173.161.44.97]:25 Operation timed out)
To explain mailout1 is the first one in priority of outgoing separate SMTP servers we set up in the zone of mail.vineyardil.net which is the DNS server. They send out ok all outgoing mail to other addresses as we wanted them (rather than having mail.vineyardil.net do it) but when we send to an address with vineyardil.net on it then we get this same message.
It seems like mailout1 cannot send to the incoming server. Note the ip address it gives is the ip of the cable modem on this network not the ip address locally in the net we have.
Our MX records all look good and things work with mail if we use it both as incoming and outgoing (SMTP) but when we use the secondary servers for outgoing they seem to not be able to send to this server. Is there something we should look for?
Is SL server not capable of what we are trying? Any feedback would be most appreciated. We would like to really use this setup as I explained to do load balancing of mail as part of our attempt on this new network to get our bulk mailing split up between the 3 outgoing servers so we will not be labeled spam by the security systems out there these days like it was on our old network.
Thanks for your time.
Russ Jacobson

Monthly sales forecast file upload new combinations not getting loaded.

For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
We run CIF daily and monthly also to include all new material.
When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
Can anyone advice.

Hi Siva,
To b frank I did not completely understand what you are talking about as you are all over.
As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
"Sold to party is new"-- where is this new? in the cube data?
"contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
This still does not stop the system from creating all combinations int he cube as CVCs.
The possible reasons why the combinations(CVCs) are not generated from cube:
1. If there are empty values in a record like below
Plant--Materialsales org.-customer---qty.
P1--M1SO1____----10
P2--M2SO2C2--
17
The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

Wjack2010: my fie fox will not let me get into mt E-mail

my browser is fire fox. When I click on firefox at takes me to msn which has mr e-mail account . i log in and this is what come up. to sign in to window live account tey upgrading your browser. if yore account is microsoft internet explorer, install the lasted version of the browser. I seen to have trouble down load firefox . What do i need to do??
Can not get on my e-mail to read. Help

Which version of Firefox are you using?
Help > About Mozilla Firefox = at the bottom of that window
looks similar to this
Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8

Sorry might sound dumb but am new to this. I'm getting loads of junk emails. I've noticed my firewall is turned off should I turn it on?

Sorry might sound dumb but am new to this. I'm getting loads of junk emails. I've noticed my firewall is turned off should I turn it on?

No, a firewall is for blocking connections based on ports and protocols. You could block all of your email with it by blocking pop or imap ports, but then you would get no emails at all.
You already are protected from direct connections initiated from the internet if you have a router. Don't turn anything else on. Unsubscribe to any mailing lists that you might be on and filter your junk email in your mail application.

Data is not getting loaded using the Demon for RDA

Hi friends,
We are doing a POC for Real Time Data acuisition.
For this we have copied an exisiting datasource and made it Real Time enabled.
Replicated the datasource now we can see the new datasource in BW.
We have created an Init Info Package (This loads only till the PSA).
Loaded the data using Full DTP to load from PSA to the DSO, this succesfully loaded the data in the DSO.
After that we Created a Delta Info package and a Delta DTP and assigned them to a Demon and started the demon. But strangely i can see the delta data getting Loaded to the PSA but there is nothing happening on the DTP. When i check the DSO manage there is no Delta request. The only request what we have is the Full load.
Is there any step or something im missing? please guide me.
Regards
BN

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
          <error-code>404</error-code>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
     <error-page>
          <error-code>500</error-code>
          <location>/faces/SessionExpirepage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>java.lang.Throwable</exception-type>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

Applet not getting loaded in Windows Vista's Mozilla Browser

Hi,
When I open the URL http://www.operamini.com/demo/ , the applet in that site gets loaded from windows XP and linux, but not from windows vista, for the same firefox version. When I refer the Java console I get the message lissted below.
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
load: class org.microemu.applet.Main not found.
java.lang.ClassNotFoundException: org.microemu.applet.Main
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What can be the reason? what should be done to overcome this?Is it due to any version incompatibility of Java? I have no idea regarding this.
Please help
Rony

there are other issues as well - in Safari:
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/s.png] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)

Cube not getting Loaded

Hi Friends,
           I have a cube which is getting loaded for R/3 data source, In the extractor (RSA3) there are records, and after loading the infopackage also the PSA also has records, when I do the upload from my PSA to my cube, the job is also sucessful, but when I check the contents in the cube everything is empty, The requests is marked sucessful and it is avaiable for reporting, everything looks absolutely fine, but there are no records in the cube, can some one guide me please!!
thanks

Hi ,
     I have the following code in my Start Routine :
IF (     DATA_PACKAGE-cppvlc EQ 0
         AND DATA_PACKAGE-cppvoc EQ 0
         AND DATA_PACKAGE-cpstlc EQ 0
         AND DATA_PACKAGE-cpquaou EQ 0
         AND DATA_PACKAGE-cpsvlc EQ 0 ).
      DELETE DATA_PACKAGE.
      CONTINUE.
ENDIF.
What should I modify this to?? and what does this code mean??

Getting loads of e-mails daily

Similar Messages

Maybe you are looking for