Getting message "Bad quality received from network module". Then FP1600 no longer communicat​es, cant ping it. When

it is power cycled it works again. We have another FP1600 on same network with no problem. Ethernet drop is 230 feet. Part# is 185690E-01, firmware 4.11. I have swapped it with a spare unit we have of the same part number, 185690E-01 and firmware release.The FP1600 has been swapped with a spare we have, the network cable has been replaced, the FP-TC-120 has been swapped with a spare. The IP address has been changed.

it is power cycled it works again. We have another FP1600 on same network with no problem. Ethernet drop is 230 feet. Part# is 185690E-01, firmware 4.11. I have swapped it with a spare unit we have of the same part number, 185690E-01 and firmware release.Mike,
Thank you for using the discussion forums. If possible, please generate a phone support request at ni.com/ask. One of our engineers will be happy to help you resolve this particular issue.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

Similar Messages

  • "Bad quality received from network module."

    My computer has 2 Fieldpoint ethernet banks setup to allow Lookout to interface with mulitple HW peripherals.  Lookout launches automatically when the computer starts up.  And after everything is loaded, one of the ethernet banks will almost immediately log the following alarm, "Bad quality received from network module."  Does anyone know what criteria/logic is behind the triggering of this alarm?
    We have been unable to find any issues that would cause this alarm to go off.

    it is power cycled it works again. We have another FP1600 on same network with no problem. Ethernet drop is 230 feet. Part# is 185690E-01, firmware 4.11. I have swapped it with a spare unit we have of the same part number, 185690E-01 and firmware release.Mike,
    Thank you for using the discussion forums. If possible, please generate a phone support request at ni.com/ask. One of our engineers will be happy to help you resolve this particular issue.
    Regards,
    Michael Shasteen
    Applications Engineering
    National Instruments
    www.ni.com/ask
    1-866-ASK-MY-NI

  • IMessage: Video Message BAD Quality?

    Hey guys, I just updated my iPhone 4 with iOS 5. I've been looking forward to use iMessage because video message is my primary way of communicating with my girlfriend (no FaceTime over 3G). In iOS 4, I used a 3rd party App called Kakaotalk but it can only send 10 seconds of video message.
    So I tried sending a video message through iMessage and I can send it longer than 10 seconds, which is great, but the receiver gets a bad quality of the video. If you are the sender and you play the video on iMessage, the quality is the same as the Camera app though.
    Anybody have the same problem? If so, will Apple fix this?

    Bring
    Up
    My
    Post

  • TS3276 How do I reconfigure Mail to the new settings required by Verizon? If I don't comply by Sept. 2013, my mail service will be interrupted.  The following is the message that I received from Verizon:

    How do I reconfigure Mail to the new settings required by Verizon. If I don't comply by Sept. 2013, my mail service will be interrupted.
    The following is the message that I received from Verizon:
    Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
    Server                    Current Setting                  New Setting                  SSL Enabled               Port
    POP3 Server       incoming.verizon.net           pop.verizon.net                       YES                   995
    SMTP Server        outgoing.verizon.net         smtp.verizon.net                      YES                   465
    TIPS: Depending on your email application, you may need to turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to restart your device for these new settings to take effect and for your email to continue working properly.

    On 10.7 (most any other versions should be similar) Mail > Preferences > Accounts > select account > Account Information, and confirm that the Account Type at the top is POP. 
    If it's currently working and is shown as an IMAP account, then please stop now, and reply back here with that detail.
    If the account is shown as a POP account, then update the incoming (receive-path) mail server to match Verizon's message if your current settings show a different mail server, then select the Advanced tab to set the port and to enable SSL, and also ensure that the Authentication setting has "Password" selected... 
    Now for the outbound (SMTP) path...  Back over to the Mail > Preferences > Accounts > select account > Account Information tab, and switch the Outgoing Mail Server (SMTP) selector to "Edit SMTP Server List" item to get to the "outbound" mail settings and select the Verizon SMTP server account from the list shown at the top and select the Account Information tab and ensure that the server name matches what Verizon has now specified, and then select the Advanced tab, select Use Default Ports and check the Use Secure Sockets Layer box.  

  • Getting message in .ALI format from SAP to external mail

    Hi All,
                 We are getting message in .ALI format from SAP to external mail  , we want to receive in HTM or .txt format.
    Please let me know what needs to be changed .
    Thanks in advance
    Thanks&Regards
    Shams
    Edited by: shams111 on Aug 11, 2009 9:23 PM

    Hi Markus,
                                 I have changed the format but iam getting it in format .pdf now .
         Under INET i have selected internet and changed format to : HTM,PDF,TXT .
       Please let me know what to do to get it in HTM format.
    Thanks in advanse.
    Thanks&Regards
    Shams

  • Trying to download itunes and keep getting message 'the system administrator has set policies to prevent this installation' and therefore cant download - any ideas

    trying to download itunes and keep getting message 'the system administrator has set policies to prevent this installation' and therefore cant download - any ideas

    Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
    http://www.apple.com/itunes/download/
    Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
    Does that go through any better for you?

  • Get the File Name received from FTP Adapter

    Hi,
    How to get the File name reived through the FTP Adpater. I have created a variable with the Message type from ftpAdapterinboundheader.wsdl. from there I mapped the filename attribute to a local string variable.
    But I did not receive the file name. The output in the Audit trail is as follows:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <Invoke_File_Process_FileProcess_InputVariable>
    - <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
    - <InputParameters xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/PIERS/SP_FILE_PROCESS_UPDATE/">
    <AS_DIR xmlns="">I</AS_DIR>
    <AS_FILE_NAME xmlns="" />
    </InputParameters>
    </part>
    </Invoke_File_Process_FileProcess_InputVariable>
    Can any one let me know how to get the recevied file name from FTP adapter.
    Thanks

    you have to define variable of type InboundHeader_msg. Then in receive activity click on Adapter tab and for header variable chose your newly created variable (InboundHeader_msg). Once you receive message from FTP you should see in this variable fileName.

  • Get Message ID and namespace from ABAP Mapping

    Hi XI Expert,
    Please advise how to get the message ID and namespace from ABAP Mapping.
    Thank You and best Regards
    Fernand

    Hi,
    To access the message ID, use the method GET_MESSAGE_ID of the controller object:
           1.      Fetch a protocol instance for the protocol IF_WSPROTOCOL_MESSAGE_ID.
           2.      To have the system return the message ID after the sender has sent a request message or the receiver has received a request message, use the method GET_MESSAGE_ID of this instance. This returns the ID by using the parameter MESSAGE_ID of type SXMSGUID.
    Also you could do the same by this way also:
    IF_WSPROTOCOL_XI_HEADER
    has attributes messageid and interface namespace.
    using this  you can read the XI message header

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • How to get value in backing bean from application module

    Hi all.. I'm new in jdeveloper and adf..
    I need to use value from backing bean and use that value in application module.
    But I don't know how to get it.
    Do you a have any solution?

    suppose you have myMethod(String argumentName1,String argumentName2) in your Application Module
    then to access a method binding from a managed bean, use the following code,
      BindingContext bctx = BindingContext.getCurrent();
      BindingContainer bindings = bctx.getCurrentBindingsEntry();
      OperationBinding operationBinding =
           bindings.getOperationBinding("name_of_method_binding");
      //Here you can pass the parameters value to the AM method
      operationBinding.getParamsMap().put("argumentName1",value1);
      operationBinding.getParamsMap().put("argumentName2",value2);
      //invoke method
      operationBinding.execute();
      if (!operationBinding.getErrors().isEmpty()) {
         //check errors
         List errors = operationBinding.getErrors();
      //optional
      Object methodReturnValue = operationBinding.getResult();

  • Trying to delete specific pages inpdf and with some get message "bad parameters". What does that mean

    I'm trying to delete specific pages in a pdf document but I get the message "bad parameters" on some of them (not all).  What does that mean & how do I get past that to delete the page?

    My bad, this was not Adobe Reader - employee was just in an Adobe document which we edit/delete all the time but in this particular document she got the "bad parameter" message on certain pages.

  • Elements 13   continually get message"Elements 13 organizer has stoppped working" then program shuts down. Have re-booted computer ....Uninsatalled program and reinstalled from disc  ..nothing works

    just purchased elements 13 ..... Get message "elements 13 organizer has stopped working ..... Program then shuts down   Re booted computer .... Uninstalled program and reinstalled from disc ... nothing works

    Please try out the instructions mentioned in RESET PREFERENCES and RESET SAVED PREFERENCES sections of article:
    https://helpx.adobe.com/elements-organizer/kb/organizer-crashes-launch-does-not-start.html
    Thanks,
    Anwesha

  • Keep getting message "none of your preferred networks are available"

    Whenever I start mny iMac running 10.6.3 I keep getting the message ""none of your preferred networks are available" and my wifi won;'t connect. This never happened before yesterday. Help! What do I do?

    OK, well let's start. First thing to try is a SMC Reset Please read the instructions carefully as they cover multiple models of Mac's you want to use the one for Intel iMacs.
    After you done your SMC reset please report what happened.

  • How to get data to internal table from function module tr_inspect_objects

    How to get data from funtion module to an internal table .
    function module name is tr_inspect_objects(code inspectore  se10)
    how top collect all   task request data into one internal table using this fm or we have to create another fm .
    If you have already made FM please give us the code .

    Hi,
    You can use tables E070 or E071 to get data into your internal tables instead of a function module.
    Hope this helps.
    BR
    Dep

  • TS1398 I get message 'unable to connect to network'   I've used this network for several months.  What can I do to get my ipad connected to my wifi

    I've been usining my ipad for several month but have not had a class.  Today I keep getting message that I am not connected to WiFi

    Try forget the network and reconnect it

Maybe you are looking for