Getting Message from Exception

Hi,
I've got an RFC written in Abap that raises an exception with
MESSAGE ... RAISING ...
The exception name is always the same, however the message ids and numbers are different. A caller written in Abap can simply read the values out of SY-MSGID, SY-MSGNO, SY-MSGV1, ...
My caller is written in Java using JCo. How can I read this values from the Java side?
Best regards
Günther

I searched about this error, but no luck.
First time when the message dequeues, the consumer can consume the message but throws the error in the log.
But when I put the message back into queue from archive directory, the consumer doesnt consume message and throws me the same error.
Does anyone faced this sort of issue.
I checked my xsd throughly, and validated it externally. but didnt fine any error.
if anyone knows, suggest me how to resolve this issue.
thanks & regards
Chandru

Similar Messages

Am getting message from MacPro that my start up disc is full - but I can't find it and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files. help?

I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss in the trash, but it is not clear to me what items I can toss and which items I can't toss. Can you help? Using the imovie "help" support the system showed me under the menu item "go" where the "start up disc" should be - but that wasn't actually available on my menu! Thanks for your help!

Disk Utility
Get Info on the icon on Desktop
Try to move this to the MacBook Pro forum
Your boot drive should be 30% free to really perform properly. 10% minimum
Backup, clone, use TimeMachine, use another drive for your projects and movies, replace and upgrade the internal drive even.

I use my boyfriend's apple account and for a while it worked good. I would get messages from him and all but Recently, the iMessage stopped working and now his account sends messages to me but it sends to himself. Need help

My boyfriend and I share an apples account for a while now. I would get messages from his phone he would get mine. We would text on that ID but now it's acting up. It doesn't let him send me messages, it sends it to him twice. I use the email but he uses the #. Does anyone know what to do?

The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

How to get messages from IBM MQ in Oracle.

Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.

You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing

Installed Acrobat XI but getting message from a website that I need later version of PDF viewer to view full contents of document?

Installed Acrobat XI but getting message from a website that I need "a later version of PDF viewer to view full contents of this document". How to fix this?

THe message is misleading. Save the file to your desktop, even though all you see is the message. Then, open the saved file in Reader.

Got a new Samsung galaxy s3 and can't get messages from iphone users now. Don't have the old iphone to change the settings ! please help . need to know how I can get messages on my galaxy

Can't get messages from iphone users on my new Samsung g allaxy and don't have my old iphone anymore ! Please help !

Read here under no longer have device:
http://support.apple.com/kb/ht5661
Be aware, changing your Apple ID password doesn't always work, & can take up to 45 days to work.
It's either that, or you call AppleCare & have them fix.

When i try to download music from dilandau i get message from safari as 'undefined'

when i try to download music from dilandau i get message from safari as 'undefined'. Pl help

I was going to check that site; however, since I got a red "not trustworthy" from WOT, I decided not to put my Mac at risk going to a questionable site. I'd recommend not going there; instead, do the right thing: buy the music from a reputable site.

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat

Anyone who I had previously used iChat with, can no longer send me texts now that I have had to downgrade back to a 3Gs.
Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat.
My carrier (Rogers) says they have nothing they can do about it.
Thanks in advance.

Correction - iMessage, not iChat. Too early....

What do I do if I Switched to an android phone but Im not getting messages from apple users because of the I messages. I have already turned off my I messages on my old phone.

I Switched to an android phone but Im not getting messages from people with I phones because of the I messages. I have already turned off my I messages on my old phone.

http://support.apple.com/kb/ts5185

ICloud sync problem - getting messages from one contact on two different phones

My partner and I accidentally synced our phones to the same iCloud account and all of our contacts merged. We solved that problem but now we're both getting messages from one of my contacts at the same time. We've both deleted the contact and the message string, and that hasn't seemed to help. Any advice would be most appreciated.

Reset iMessage by turning it off and then back on. You might have to restore phones as new because I message Registers the phone with the cloud.

I got an android, turned off my imessage on my iphone and deactivated the iphone through apple support but I still don't get messages from people using iphones. What's wrong?

I got an android, turned off my imessage on my iphone and deactivated the iphone through apple support but I still don't get messages from people using iphones. What's wrong?

Go ahead and call AppleCare at 1-800-692-7753 and ask them to revoked your certificate

I am getting messages from a "number" which is not enough digits to be a real number. It includes a website to follow. How do I block?

I am getting messages from a "number." I have gotten three messages and the ending digits have been 001, 002, and 003, so I can't block just one number. They always include an e-mail address, subject, and web page to click on, which I have never done. I don't even open the message, but just swipe to delete. I am tired of getting them though. Anybody know what to do to send to a spam account or block? Thanks.

Did you sysc youriPod to your computer. If not, you have nothing to worry about. If you did sync it, you don't have to transfer the files from the iPod. Suggest you read the iPad manual.
Suggest you download the iPad User Guide
http://support.apple.com/manuals/#ipad
 Cheers, Tom

I am on a wireless network. Why do I keep getting messages from iTunes stating that I am not?

I am on a wireless network and keep getting messages from ITunes stating that I am not on a wireless network. I know the wireless is working. Itunes will not allow me to rent a movie until i get on the wireless network of which I am already on. Help.

I just bought two song without problem, then i tried to get the video of the week (free) in canada and I had the same message as you.
the video is just over 50 MB, which is the new limit for file size for App on IOS over 3G and LTE.
I tried on my iPhone same thing. I even put it in the Airplane mode, and then activeated the WiFi
with the same result.
I then bought another song, smaller than 50 MB and it worked.
My video is not listed as Bought, and it is not available in the "Check for available downoload"
Did any of you had tried to buy something under the size of 50 MB ?
Try the free song to see if is it seize related.
Franco

Powerpivot - Can't insert formula that combines two or more different columns and keep getting message "unhandled exception has occurred in a component in your application...

I am using powerpivot v2 with excel 2010.
When I go to my excel file's powerpivot and I try to insert a formula in any column, I constantly get the following message:
"unhandled exception has occurred in a component in your application. If you click continue, the application will ignore this error and attempt to continue".
************** Exception Text **************
System.InvalidCastException: Return argument has an invalid type.
at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
Does anybody know how to fix this ?

Mark,
I used the Fix It found here:
http://support.microsoft.com/kb/2739501
I would have to ask my IT support person for more specifics, but as I understand the scenario with my particular laptop: the laptop came preloaded with RTM build of 2013. We used Control Panel to uninstall Office 2013, in order to install Office
2010. I installed PowerPivot add-in and used it successfully with no issues for several months. After attempting to install another program and encountering issues with apparent traces left behind of Office 2013 uninstall, I found the link above
and used the Fix It to attempt to remove all remaining traces of Office 2013. While it did appear to find and clean-up quite a bit left behind from the Office 2013 install, I was surprised to find an error upon entering my existing installation
of PowerPivot for 2010 and attempting to type new formulas into the formula bar.
My experience to-date is that an error message stating ""Return Argument Has an Invalid Type" appears anytime I select or modify a formula in the formula bar that would cause the intellisense to appear. For example, when I first click into the formula
bar, I do not get an error...but as soon as I type the first letter, before the intellisense appears, I get the error message. Throughout the remainder of the formula as I type, just prior to any time when the intellisense drop-down will appear
again, I get the same error message again (see details below).
At one time, although I can't reproduce it now, the error message did state ".Net Framework" in the menu bar of the error pop-up window. I can't get that to appear again, as it now only says "PowerPivot for Excel". Based on this, I had attempted
to see if I could repair my .NET framework install using the following tool:
http://www.microsoft.com/en-us/download/details.aspx?id=30135
I learned, however, that since I am running Windows 8 which comes with .NET 4.5 built-in to the OS, this tool does not yet cover that version for repair.
While the overall end-result of my PowerPivot models appear to be just the same, having to click through "Continue" on the error message multiple times each time I enter a new formula is a huge drain on productivity.
Let me know if you have any additional questions.
David
System.InvalidCastException: Return argument has an invalid type.
   at System.Runtime.Remoting.Proxies.RealProxy.ValidateReturnArg(Object arg, Type paramType)
   at System.Runtime.Remoting.Proxies.RealProxy.PropagateOutParameters(IMessage msg, Object[] outArgs, Object returnValue)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Office.Interop.Excel._Application.get_ActiveWorkbook()
   at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.currentClientWindow_InFormulaBarChanged(Object sender, EventArgs e)
   at Microsoft.AnalysisServices.Common.SandboxEditor.formulaBar_Leave(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
David Duncan Consultant I.B.I.S., Inc.

Getting Message from Exception

Similar Messages

Maybe you are looking for