Getting Message "No business partner found" in NOTIF_CREATE

Hi All,
I am getting an error message "No business partner found" when try to find the Person Responsible.
1. Run Transaction NOTIF_CREATE
2. Set Message Priority (e.g. Low etc..)
3. Choose System / IBASE
4. Installation No. will be automatically populated after choosing SYSTEM or IBASE.
5. Choose Appropriate Component.
6. Choose Reported By.
7. Person Responsible - getting error "No business partner found"
Where as i have already created business partners via SAP Transaction BP, which i m able to view at step no. 6.
Even in transaction IB52, the functions Contact Person, Employee Responsible, Service Employee Group, and Sold-To Party are assigned to appropriate users.
could you please suggest something ?
Thanks,
Avinash

Dear Ragu,
First of all thanks for your guidance !!
Yes, I have already created business partners through DSWP -> Create Business Partners.
But in this case I am only able to create business partners for the clients I have on Solution Manager System and not for the clients (RFC's) from our Development Environment.
When I click on Add button it shows me the different RFC connections through which our solution manager system is connected to development environment. if would choose any of the RFC which connects to solman to dev environment, it only shows me only one user CUST_SCOUT.
I believe after choosing an RFC it should populate all the users avaialble on dev environment.
Please let me know your thoughts on this.
Thanks again for all your help !!
Thanks,
Avinash

Similar Messages

No business partner found for ERP partner "Vendor" (role:LF)

Dear Experts,
When we create Inbound Delivery in ERP, it is getting distributed.
But the IBD is not created in EWM.
We checked in SLG1 and the deliveries were failed in the queue.
The error message says "No business partner found for ERP partner EWM_TEST (role:LF)".
We have maintained Business partner and IT type = CRM004 in Identification Tab.
Still, no idea how we can solve this issue.
Please suggest with your valuable inputs.
Thanks,
Shetty

Hi Ulf ,
Yes i have CIF ed vendor and seems ok now , but while task creation am getting error Please refer below screen shots and kindly guide me on error message .

Error message "No business partner could be created for vendor ..."

Dear experts,
I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new BP role recently i must have changed the settings and now when creating BP from vendor (FLBPC1) i get the following message:
No business partner could be created for vendor"
The long text of the message is:
Message no. CVIV_UI013
Diagnosis
No business partner could be created from the vendor selected.
System Response
An error occurred when creating a business partner from the vendor selected. This error prevents data from being transferred and saved. This could be due to the following:
Fields have been left blank in the vendor that are set as required entry fields for the business partner.
Settings for assigning Customizing values for the vendor to the business partner are incorrect.
Procedure
Start the Post Processing Office and check the error message. Make the necessary corrections.
I have checked all my customizing settings one by one but cant locate anything missing or wrong.
Also, in 956054 it is said that i must perform various migration reports, but i believe if it did work before without running these reports, this couldnt not be the problem now.
Any help would be appreciated
Thanks

Hi,
reason is the following.
The customer / vendor doesn't use special attribute to differentiate
between persons and organizations - in opposite to BP.
You can achieve what you want to do by using a BAdI prepared for that:
You'll find this in IMG transaction SPRO:
Cross-Application Components
Master Data Synchronization
    Customer/Vendor Integration
      Business Partner Settings
        BAdI: Data Assignment of Form of Address from Customer/Vendor t
Please read documentation of this BAdI in IMG.
You may use standard implementation CVI_MAP_BP_CATEGORY.
You also may create own implementation of the BAdI, if you want to
differentiate on other attributes.
Hope that helps.
Regards,
Franz

Getting error message in Business Partner search help

Hi Experts,
User is getting an error message while clicking the Search help for business Partner in all the transactions (FPL9, EEDM11, etc.).
Only few users are facing this issue. We have compared the roles of the affected users and unaffected users and the roles are same. What will be the reason for few users getting the error?
Thanks & Regards,
Dipin

I'm not familiar with EEDM11, but FPL9 has parameter ids that can be set at the user level. Look at
System/User Profile/Own Data, Parameters tab between your two groups of users. Also consider checking the settings in Help/Settings, F4 Help tab.
Lastly, you might try dropping debug on the error popup and see where it is being triggered from. Maybe the answer is there.
Regards,
K--

Tried to install update today and get message MSVCR80.dll not found

Downloaded the update to itunes today but it will not install. Get the message MSVCR80.dll not found. Tried to download again but no success.

Hi yukejeff,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Query in CRM to get data from Business Partner and Opportunity

Need to develop a new query based on Business Partner and Opportunities in CRM. Not finding any link how to relate these two .

Hi Vishal,
BP is the Master Data, so load the master data first and then load the Transaction data for Opportunity Item and Header and then Create the quesry on the Opportunity Cube. Your problem is solved.
Assign points if useful.
Regards
Vishwanath

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

Getting message "file cannot be found" when trying to play music in iTunes

When trying to play ANY music in my iTunes Library I get the message that the file containing the music cannot be found. I recently updated to the latest version of iTunes - is this the problem or is it something else?? I thought that at least the songs purchased from the iTunes Store would play but they do not. I receive the same message which asks if I want to attempt to locate the file. I click yes and that takes me to the iTunes Library which gets me nowhere. Anyone have any ideas????? I have used iTunes for years with no problems before this.

Hi Patricia,
First, try Repairing Disk Permissions. Quit all open applications. Launch Disk Utility, it's in your Applications/Utilities folder. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Repair Disk Permissions. Only takes a few minutes to run, then Quit Disk Utility. Reboot your PBook and launch iTunes. See if you can play a track...
If not... with iTunes open, select iTunes Store, then from the Menu Bar, click Store/Authorize Computer and see if that works. If that doesn't work ...
Quit iTunes. Try dragging the com.apple.iTunes.plist file from the HD/Users/YourName/Library/Preferences folder to your Desktop. Launch iTunes and see if you can play tracks. If you can, drag that file back to the Preferences folder. If not, drag that file to the Trash, empty the Trash and reboot. It could be your iTunes preferences file is corrupted and needs replacing. Your Mac will create a new pref file for you the next time you launch iTunes.
Hope something helps...
Carolyn
Message was edited by: Carolyn Samit

Web Cam Light Went Out--Now Get Message that No Camera Found

A few weeks ago while shutting down my computer, a message came up that said "no camera found." Since then the web cam light has not come on. I was reading through the support discussions which suggested opening Photo Booth and looking for the camera. However, when I open Photo Booth all I get is a gray screen with a diagonal line over what looks like a camera window. Thank you.

Carol Jean wrote:
A few weeks ago while shutting down my computer, a message came up that said "no camera found." Since then the web cam light has not come on. I was reading through the support discussions which suggested opening Photo Booth and looking for the camera. However, when I open Photo Booth all I get is a gray screen with a diagonal line over what looks like a camera window. Thank you.
Hello Carol Jean
For any iSight problems, first try restarting the Mac. If the problems persist, try all relevant suggestions from:
http://support.apple.com/kb/HT2090
If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if your built-in iSight still does not work after carefully following all the suggestions in the "How to Troubleshoot iSight" article, and if iSight does not show as a USB hardware device in your Mac's System Profiler utility, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Can I use Adobe CS4 with Mavericks? I get message: Document Types Not Found

Not able to open CS4 after moving from 2006 MacBook to newer MacBookPro with Mavericks already installed.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to download ITune and keep getting message Apple application not found. Error 2

I am trying to Download ITunes to my PC and keep receiving a message " Apple Application Support not found. Error 2. The installation will not complete.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS still won't install normally.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

No business partner found

Hi
I have been created key user in BP. I used Create Key Users Automatically and Create Key Users Manually two methods, i can find this key user in tcode bp.
When i create message use tcode NOTIF_CREATE, i can select system/ibase,component, but reported by have no value can be selected. And when I create message from satellitensystem, I find this message, but don't konw who create this message.
Please help me. Thanks.
Edited by: marco on Jan 4, 2008 4:41 PM

Hi Marco,
Can you check the note below.
Note 859199 - No values for key user in Transaction
NOTIF_CREATE
Hope it helps.
Award points for useful answers plz.
Rgds,
Sri

Missing Business Partner

Classic Scenario; SRM 5.0; R/3 46C
Hi everyone,
I am a true novice when it comes to troubleshooting issues related to Business Partners. My updated SRM Org Structure shows that there is a node w/ a business partner number 0000005409 under the Extended Attribute - Locations. And for the plant description, the line is blank.
However if I go to the transaction BP and search for this business partner 0000005409 - I receive the message "0 Business Partner Found." Has anyone encountered something like this?
I think when we did the upgrade from EBP 3.5 to SRM 5.0 there was a failed operation.
Any help would be greatly appreciated.
Thank you.

Thank you again for your response Gordan.
I checked the table but this BP is indeed missing.
Do you recommend that I assign a new BP? My only concern is that this BP exists in the org structure. How can I "safely" recreate this BP and reassign; do you see any issues that I have to aware of?
I am very unfamiliar with this process and relationships with other objects in SRM.
Thank you again for your informative responses.
Thank you,
Jay.

How to get business partner number of a Company code

How to get Company code business partner number..
Any FM or table name which can help us to get comapny code business partner number
Actually we want to find the default address number of the company code.
please suggest a way to find partner number of company code or directly to get default address number of the company code

Hello LS Kumar,
Try to use below Code may help:
DATA ls_object              TYPE hrhctobjc.
DATA ls_company             TYPE bbps_es_unit_id.
DATA ls_company_bupa        TYPE hrobjbupas.
ls_object-otype = is_org_unit_id-otype.
ls_object-objid = is_org_unit_id-objid.
CALL FUNCTION 'HR_OBJECTBUPA_GETBUPA'
    EXPORTING
      is_object               = ls_object
    IMPORTING
      es_hrobjbupa            = ls_company_bupa
    EXCEPTIONS
      object_type_not_allowed = 1
      OTHERS                  = 2.
IF sy-subrc NE 0.
    RAISE EXCEPTION TYPE cx_bbp_es_not_found.
endif.
Which determines the company code of the user belongs to:
CALL FUNCTION 'BBP_OM_DETERMINE_COMPANY'
      EXPORTING
        i_user_id = lv_user
      IMPORTING
        et_compc =lt_compc
      EXCEPTIONS
        OTHERS    = 1.
Regards,
Sankarbabu

Updated itunes today now wont open getting message.......MSVCR80.dll not found cannot open itunes.......any ideas??

updated itunes today now wont open getting message MSVCR80.dll not found......reinstalled itunes several times still not able to open itunes....any ideas?

iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Getting Message "No business partner found" in NOTIF_CREATE

Similar Messages

Maybe you are looking for