Getting message:  not charging

We keep getingt the message:  'not charging' whenever the iPad2 is plugged in to the power receptacle - using the iPad2 supplied cord .
However, the iPad does seem to be charging anyway. 
We have had this iPad2 since December, 2011 and this has never happened before - just in the last two days
How can we get rid of this message.
We have rebooted, but the message returns.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • How come I get the message (Not Charging) when I am plugged up to power?

    How come I get the message (Not Charging) when I am plugged up to power? I keep getting this message, is there a problem? Or is this normal

    It had got done to 30% when I plugged it up, it goes in and out - charging and not charging. it is sitting still, but I am creating Movies with iMovie and iDVD

  • I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

    I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

    Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.

  • I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
    Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
    And as BGreg say, call Apple support is also a good way to begin with.

  • I am getting a message "Not Charging" next to the battery icon.

    When I plug my iPad into a wall socket, I get a ping as if it is charging but the message next to the battery icon says Not Charging.  I have tried several different charging cables.

    Take it to an Apple Store for evaluation.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • TS2755 When sending a txt message to another iphone user  we both are getting message not delivered but it is, yet when i send txt to an adroid i dont get that message at all so its not a provider issue

    When i txt to Nother iphone we both get message undelivered et when i txt to an adroid phone its fine

    Erase any conversation you have with this person in your Messages, then start a new one and see if it does same thing.    If it still doesn't go through right away, it's a problem with your friend's iMessage setup, not yours.

  • I want to play an episode from channel seven but keep getting message not available in this region - but it is

    GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
    HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, Lou

    Thank you so much, Ram!  I REALLY APPRECIATE YOUR HELP!
    I am wondering if it possible to manually create a node in RSA6 for the InfoSet.  I tried it by doing the following:
    I went to RSA6 and clicked on the white icon for "Create Node".  I then entered the number "8", followed  by the name of the InfoSet.  (I entered an "8", because all our DataSources seem to start with an "8".  I'm not sure why.) 
    The DataSource now shows up, but when I double-click on it, nothing happens.  When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
    Also, do you know where I can get my hands on the white paper? 
    Thanks again!
    Regards,
    Sarah-Jane

  • I.tunes keep getting message not connected to the internet when I am

    I keep getting message I am not connected to the internet when I try to access itunes store when I am connected

    Hey confused joseph,
    Thanks for the question. I understand you are experiencing issues connecting to the iTunes Store. The following resource should help you troubleshoot these issues.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks,
    Matt M.

  • Getting "messages not sent" error from Yahoo e-mail outbox folder

    I tried forwarding two e-mails with attachments that somehow got stuck in my outbox.  I continually get the "x messages not sent" error message but when I click on the error and go to the outbox, I am unable to delete the messages or perform any other action because it says the messages are in the progress of being sent.  Any thoughts on how to clear this error?

    RegisMcGarry wrote:
    I tried forwarding two e-mails with attachments that somehow got stuck in my outbox.  I continually get the "x messages not sent" error message but when I click on the error and go to the outbox, I am unable to delete the messages or perform any other action because it says the messages are in the progress of being sent.  Any thoughts on how to clear this error?
    Simple delete the yahoo mail from the native email app. then go to the google play store and download the stand alone YMail app and you need only to enter your yahoo mail user name and password and it will work perfectly.
    Good Luck

  • When backing up iPhone 5 to iTunes get message not enough space on computer

    On backing up iPhone 5 to iTunes keep getting message "iTunes could not back up "M iPhone" because not enough space on this computer."
    There is actaully 125 Gb free on computer. Have run repair disk permissions through Disk Utility
    Any suggestions please?
    Thank you

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

  • SIP8961 press messages button and get "Messages not available"

    I can go offhook and dial the voicemail pilot number 6599, but pressing the messages button says "Messages not available” in large pop-up (see attached photo) (debug ccsip messages shows no output either).  I’m not looking for voice view express to work, just to be able to check messages.  Once I fix this is there something under voice register global I need to put for a SIP 8961 for Voice View Express in Unity Express 8.6
    If I got to a SCCP 6945 I have no problems checking messages (debug ccsip messages I get output)
    CME 9.1/152-4.M3.bin and SIP 8961 9-2-2SR1-9
    voice register global
    mode cme
    source-address 172.83.112.11 port 5060
    max-dn 1100
    max-pool 420
    voicemail 6599
    tftp-path flash:
    url service http://172.83.112.12/voiceview
    no create profile
    create profile
    apply-config   >>>>resets 8961s

    Here is a clue from the 8961's phone console log, but no fix for it yet. 
    8316 NOT 07:12:44.714324 CVM-Focus Base is class cip.comp.ao
    8317 NOT 07:12:45.678101 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8318 NOT 07:12:45.678396 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8319 NOT 07:12:45.687479 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8320 NOT 07:12:45.687638 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8321 NOT 07:12:45.887444 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8322 NOT 07:12:45.887607 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
    8323 NOT 07:12:46.757669 CVM-Focus Base is class cip.comp.ao
    8324 NOT 07:12:48.782303 CVM-HTTP JNI| call to ServletContainerClass_requestServlet successful
    8325 NOT 07:12:48.786899 CVM-Cannot open the /cisco/logsave directory
    8326 NOT 07:12:48.823011 CVM-Select returned
    8327 NOT 07:12:52.689269 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8328 NOT 07:12:52.689430 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8329 NOT 07:12:52.705499 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8330 NOT 07:12:52.705799 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8331 NOT 07:12:53.149971 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8332 NOT 07:12:53.150174 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
    8333 NOT 07:12:54.216764 CVM-Focus Base is class cip.comp.ao
    8334 NOT 07:12:54.439134 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8335 NOT 07:12:54.439297 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8336 NOT 07:12:54.451505 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8337 NOT 07:12:54.451668 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8338 NOT 07:12:54.660857 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8339 NOT 07:12:54.661022 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao

  • Message not charging

    Hi, I just got on my MacBook Air the charging cord blinking green and the indication not charging.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • HT4623 trying to update to 6.1.3 but keep getting message not connected to the internet when it is

    I am trying to update my ipad to 6.1.3 and even though it is connected to the internet, i keep getting the message: unable to update not connected to the interent.
    Any suggestions?

    Try using this extension to force compatibility.
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Check and tell if its working.

  • Upon opening Outlook 2003 get message "Not closed properly. File is being checked for erros."

    When opening Outlook 2003 get an error message stating that is was not closed propertly and that the file is being checked. It can sometimes take up to 5-10
    minutes for outlook to open. How can I stop this?

    You need to figure out why Outlook is not closing property. The usual culprits are addins that access Outlook data. 
    Are you closing outlook before shutting down windows? If you let windows shut it down, you can corrupt the pst. 
    Does it work better in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok. 
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Have windows 2000 get message not found line underneath nginx

    I use windows 2000 trying to get on to google get a message saying file not found then a line underneath this with the letters nginx. Need help am not a computer person at all.

    You are using a 2 1/2 year old version of Firefox, which isn't supported any longer, you need to upgrade to a newer version - either 3.6.23 or 7.0.1.
    http://www.mozilla.com/en-US/firefox/all-older.html <br />
    http://www.mozilla.com/en-US/firefox/all.html
    You are also using insecure, outdated plugins, see this: <br />
    https://www-dev.allizom.org/en-US/plugincheck/

Maybe you are looking for