Getting message tone with delivery report in Nokia...
Whenever i send a txt message , with every delivery report i get a message tone which is very annoying. Solution please.. :s
Hi Jayoza,
Try going under Profile personalisation and set Warning Tones to OFF, then check again.
Also go Messaging-->Settings-->Service message-->set to 'OFF'.
We would recommend you to try one after the other and see which one will help. But report back and let us know if this has helped.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!
Similar Messages
-
I have an icloud account and I view my mail with Mail V5.2. I recieve my email but the senders get messages saying the delivery failed. Can anyone explain this or help me.
Thank you for replying. Yes I deleted the old email address..
-
HT4623 can i get callback tones with my Iphone 5?
Can I get callback tones with my Iphone 5?
If you mean what my carrier calls "ringback tones", it all depends on what your carrier offers. Ringback tones aren't a feature of the phone. They are a carrier feature and will work on any phone. I use them on my iPhone. Drives my brother crazy.
-
I can't get a tone with incoming text messages.
I can't get a tone when receiving incoming text messages. I have tone for incoming mail and phone calls, it's just text messages.
I have had the same thing happen although I do not have an iPhone 5. I found that if I shut down the phone and turned it on again the text tone came back. Hope that works for you.
-
Get Message Details with C3PO & ObjAPI
Has been a while since my last attempts but I have started experimenting
with C3PO on GW2012 again.
I hooked into the GW.MESSAGE.MAIL eGW_CMDID_OPEN event just fine,
get the message ID, and now try to retrieve some message details with
ObjectAPI.
No shared folders, or proxies, just personal messages.
The exception occurs when calling gwAccount.GetMessage(msgId)
This seems so basic, it must be something pretty simple.
Any suggestion?
Thanks
Wolfgang
' function called from execute handler
' get details of this message
Dim cCode As String
Dim msgId As String
Dim msgObj As Object ' ObjAPI message object
' actually these objects are stored globally,
' and moved here just for testing purposes
Dim gwCommander As Object ' TokenAPI handle
Dim gwSession As Object ' ObjAPI session object
Dim gwAccount As Object ' ObjAPI account object
Set gwCommander = CreateObject("GroupWiseCommander")
Set gwSession = CreateObject("NovellGroupWareSession")
Set gwAccount = gwSession.Login()
cCode = gwCommander.Execute("itemmessageidfromview()", msgId)
If (cCode = "True") Then
' OK: shows my email address & message id
' like xxxxxxxx.xxxx.xxxxx.xx.xxxxx.x.xxxxx.x
MsgBox ("getCurrentMessage: " & gwAccount.Owner + " -> " + msgId)
' ERR: Object variable or With block variable not set
msgObj = gwAccount.GetMessage(msgId)
' never gets here
MsgBox ("getCurrentMessage(): " & msgObj.Subject )
End IfOn 4/15/2013 12:40 PM, Wolfgang Schreiber wrote:
> Has been a while since my last attempts but I have started experimenting
> with C3PO on GW2012 again.
>
> I hooked into the GW.MESSAGE.MAIL eGW_CMDID_OPEN event just fine,
> get the message ID, and now try to retrieve some message details with
> ObjectAPI.
> No shared folders, or proxies, just personal messages.
>
> The exception occurs when calling gwAccount.GetMessage(msgId)
>
> This seems so basic, it must be something pretty simple.
> Any suggestion?
>
> Thanks
>
> Wolfgang
>
I may be misrecalling but shouldn't it be
Set msgObj = gwAccount.GetMessage(msgId)
>
> ' *************************************************
>
> ' function called from execute handler
> ' get details of this message
> '
> Dim cCode As String
> Dim msgId As String
> Dim msgObj As Object ' ObjAPI message object
>
> ' actually these objects are stored globally,
> ' and moved here just for testing purposes
> Dim gwCommander As Object ' TokenAPI handle
> Dim gwSession As Object ' ObjAPI session object
> Dim gwAccount As Object ' ObjAPI account object
> Set gwCommander = CreateObject("GroupWiseCommander")
> Set gwSession = CreateObject("NovellGroupWareSession")
> Set gwAccount = gwSession.Login()
>
> cCode = gwCommander.Execute("itemmessageidfromview()", msgId)
>
> If (cCode = "True") Then
> ' OK: shows my email address & message id
> ' like xxxxxxxx.xxxx.xxxxx.xx.xxxxx.x.xxxxx.x
> MsgBox ("getCurrentMessage: " & gwAccount.Owner + " -> " + msgId)
>
> ' ERR: Object variable or With block variable not set
> msgObj = gwAccount.GetMessage(msgId)
>
> ' never gets here
> MsgBox ("getCurrentMessage(): " & msgObj.Subject )
> End If
>
> ' ************************************************* -
Good Day,
Hopefully someone here has the know why on this one.
I have setup the Room Mailbox as per several online tutorials. From my Outlook 2013 I can access the room and its calendar.
But when I create a new meeting request, I add myself as an Attendee for testing purposes. When I select the room from the rooms button. It adds the room mailbox [email protected] to the attendee list.
When I click send, the alias address returns as below:
Delivery has failed to these recipients or groups:
Principals Office ([email protected]) There's a problem with the recipient's mailbox. Please try
resending the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: EXCHANGE.ourdomain.LOCAL
[email protected] #550 5.2.0 RESOLVER.FWD.NotFound; misconfigured forwarding address ##
Original message headers:
Received: from EXCHANGE.ourdomain
.LOCAL ([10.10.1.3]) by exchange ([10.10.1.3]) with mapi id 14.01.0438.000; Fri, 31 Jan 2014 14:15:26 +0200 Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary From: "Chadley L. Wilson" <[email protected]>
Subject: Canceled: test 43 Thread-Topic: test 43 Thread-Index: Ac8eeG1lL8A9HdusTwmNIg6lVDeCaQABbBnA Importance: high X-Priority: 1 Date: Fri, 31 Jan 2014 14:15:25 +0200 Message-ID: <E7EC80BFFFA86E4086FDCE3C18EFBDD79ACCDF1C@exchange> Accept-Language:
en-GB, en-ZA, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: <E7EC80BFFFA86E4086FDCE3C18EFBDD79ACCDF1C@exchange> MIME-Version: 1.0 X-Originating-IP: [10.10.1.33]
In the Exchange EMC I have setup the everything as per the following link:
http://exchangeserverpro.com/exchange-server-2010-room-mailboxes-step-by-step-guide/
I have also use created a room list and added the rooms to it. They show upo in my outlook.
I have rebooted the server and tried various permissions and option settings in Outlook with no luck. I even tried enabling the user account in AD. Nothing works and the email always comes back undeliverable.
One post I read suggested that In the Resource General tab that Enable the Resource booking attendant be ticked. Either way it doesn't get right of the problem.
Chad the DadOk I see from the output below there were two problems fixed the first one, but I can't figure out how to correct this one:
The forwardingAddress is wrong. But I also do not know what it should be
Name : Principals Office
Alias : principalsoffice
ForwardingAddress : ourdomain.LOCAL/Admins/John H. Robertson
ForwardingSmtpAddress :
OfflineAddressBook :
AddressListMembership : {\All Mailboxes(VLV), \All Recipients(VLV)}
EmailAddresses : {SMTP:[email protected]}
HiddenFromAddressListsEnabled : True
EmailAddressPolicyEnabled : True
PrimarySmtpAddress : [email protected]
WindowsEmailAddress : [email protected]
DeliverToMailboxAndForward : False
ForwardingAddress : ourdomain.LOCAL/Admins/John H. Robertson
ForwardingSmtpAddress :
Chad the Dad -
Get message "loaded with errors on the target and was closed" but there are no errors in the vi.
Hi,
Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed"
The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
Any guidance to find the issue would be greatly appreciated!
Thanks,
Conor
Attachments:
Labview error.JPG 43 KBSome tips:
1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
3. Try to recompile top-level VI and its dependencies. Deploy.
4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
5. Close the project. Restart RIO. Open project. Deploy.
6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
7. Take another computer. Deploy from it.
8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
10. Contact NI Support. Send them your project. Make them Deploy it.
The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps. -
Message is inside a box with blue title box and red cancel "X"
in the blue title is [JavaScriptApplication]Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
What is your homepage set to? -
Exchange 2013 delivery reports for mail enabled public folder
How can I get delivery reports for mail enabled public folders? Would I search the related public folder mailbox?
Hi,
When you track messages using Delivery Reports, you can only choose user mailbox when you select mailbox to search. Under the option "Mailbox to search", there is no mail-enabled public folder listed there for you to select from
the address book.
But you can search messages sent to or received from mail-enabled public folder.
Track messages with delivery reports
http://technet.microsoft.com/en-GB/library/jj150554(v=exchg.150).aspx
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Zero results in delivery reports
Hello,
recently our delivery reports stopped working.
For testing purposes I select my mailbox to search and choose "search messages I sent to:" I select a user to whom I recently sent email, which I can also see in my sent items folder.
I click on search and it stops almost instantly with no results nor error message, simply stating that "there are no items to display in this view".
I've tried multiple mailboxes with the same result.Hi,
From the error message, it seems that you don't have the required permissions. To run the Search-MessageTrackingReport cmdlet, you need to have the Organization Management, Records Management and Recipient Management permissions.
If you want to search messages for any user, please add the BypassDelegateChecking switch.
Besides, please check the application log to see if there is any related events.
About the error message "Delivery report information for this message isn't available", this can happen for a couple of different reasons. The server with the information may have not be available. It may have been taken out of rotation or in maintenance
mode. The logs may have already reached the quota and rolled over.
I recommend you send a new message and then search the delivery report to check the result.
Best regards,
Belinda
Maybe it has changed with some updates or after DC upgrade, but I was able to use that cmdlet just fine with just domain admins being in Organization Management role (and I am in domain admins group).
Anyway I have added myself to Organization Management, Records Management and Recipient Management, but still get the same error, do I need to restart some services or just wait a little?
I had checked the latest message I have sent and delivery reports return same error as before.
The only error in event log I can find is ID 12014 (but it was also there before the problem with delivery reports):
Microsoft Exchange could not find a certificate that contains the domain name
EXCHANGE.domain.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP ... -
Help with Upgrade report in FI
Hey All Gurus,
Im in a thick soup here. I am trying to do something like this -
if you see the selection screen i have rep and super rep, when a user enters a rep value --- it should use the same value to pull all open items for the super rep as well, since they are essentially the same. please help! this one needs to be done fast. i am pasting the code so that it will be easier ...
thanks a million!
*& Report ZFDOFW04_NEW
REPORT ZFDOFW04_NEW MESSAGE-ID FR
LINE-SIZE 132
LINE-COUNT 60.
*==================================================================
Program: ZFDOFW03 - Aged Trial Balance Report
This produces an Accounts Receivable Past Due Aging Report
in a more simplified/condensed format than the
SAP supplied aging report program - RFDOPR10.
This program is a modified copy of RFDOFW00, - a SAP
Future-Due Report.
This was a 'rush' job - program probably should be
rewritten someday not using logical databases as that
maybe why this runs so slowly!
Original: Feb 1997.
MAINTENANCE HISTORY:
NES071797 Copied from ZFDOFW03. Adding parameter for saeles rep.
JDEDERER - changed header text so it is differnet from ZFDORW03. 9/23
*TEXT SYMBOLS :
001 Open items per
002 O p e n
003 D u e o n
004 cc ba in total
005 until
006 Days until
007 Days over
008 Days
009 over
011 valid until........
012 Insurance limit.....
016 F u t u r e
017 + days
018 D u e
020 Last dunn.notice...
021 Dunning level....
030 S U M M A R Y S H E E T
031 =====================
050 Name Page
051 Burton Snowboard
SELECTION TEXTS:
SUMMEN Output totals only
TAGE1 Due date I until
TAGE2 Due date II until
TAGE3 Due date III until
TAGE4 Due date IV until
TABLES: T001, KNA1, KNB1, KNB5, BSID, BSEGA, RFPDO1, KNVP,
T014, "credit control areas JAM
KNVK, "cust master - contact partner JAM
T014T, "Credit control areas names
BKPF, "TONY ISSUE 4743
TVKO, "TONY ISSUE 4743
KNKK. "cust master - credit mgmt JAM
TYPES: BEGIN OF TOT_TYPE, "DEVK939546
BUKRS LIKE LFB1-BUKRS, "DEVK939546
GSBER LIKE BSIK-GSBER, "DEVK939546
KKBER LIKE BSID-KKBER,
RAST1 TYPE P, "DEVK939546
RAST2 TYPE P, "DEVK939546
RAST3 TYPE P, "DEVK939546
RAST4 TYPE P, "DEVK939546
RAST5 TYPE P, "DEVK939546
RAST6 TYPE P, "DEVK939546
RAST7 TYPE P, "DEVK939546
END OF TOT_TYPE, "DEVK939546
TOT_TAB TYPE TOT_TYPE OCCURS 0. "DEVK939546
CONSTANTS:
C_FALSE TYPE I VALUE 0, "JAM
C_TRUE TYPE I VALUE 1.
DATA: BEGIN OF GTAB OCCURS 1000,
SUPER(10) TYPE C, "TONYC
REP(10) TYPE C, "TONYC
FILKD(10), "tonyc show buying groups
LAND1 LIKE KNA1-LAND1,
GSBER LIKE BSIK-GSBER,
REGIO LIKE KNA1-REGIO,
NAME1 LIKE KNA1-NAME1,
NAME2 LIKE KNA1-NAME2,
ORT01 LIKE KNA1-ORT01,
TELF1 LIKE KNVK-TELF1, "telephone number JAM
CONT_NAME1 LIKE KNVK-NAME1, "contact name JAM
NAMEV LIKE KNVK-NAMEV, "contact name JAM
KUNNR LIKE KNA1-KUNNR, "TONYC
BUKRS LIKE LFB1-BUKRS, "TONYC
KKBER LIKE BSID-KKBER, "tonyc issue #2500
ZTERM LIKE KNB1-ZTERM, "tonyc issue #2500
KLIMK_TXT(22) TYPE C, "credit limit JAM
WAERS LIKE T014-WAERS, "currency JAM
SORT_GSB, "TONYC
RAST1 TYPE P,
RAST2 TYPE P,
RAST3 TYPE P,
RAST4 TYPE P,
RAST5 TYPE P,
RAST6 TYPE P,
RAST7 TYPE P,
T_IND,
END OF GTAB.
DATA HOLD_NAME(40).
DATA HOLD_BUKRS LIKE T001-BUKRS. "tonyc
DATA GOOD_SUPER_REP. "tonyc
DATA: HOLD_REP LIKE KNA1-KUNNR, "tonyc
SUPER_NAME LIKE KNA1-NAME1, "tonyc
REP_NAME LIKE KNA1-NAME1. "tonyc
DATA NAME_LENGTH(2) TYPE C. "tonyc
DATA BACKSLASH(3) VALUE ' / '. "tonyc
DATA REPS_INFO(70) TYPE C. "tonyc
DATA REPORT_TYPE(12) TYPE C.
DATA: C_CREDIT_ABTNR LIKE KNVK-ABTNR. "dept 003 = credit
DATA Z_HOLD_LIMIT(22) TYPE N. "tonyc issue#2216
DATA Z_DESCRIPTION(18). "tonyc issue#2216
DATA WRITE_TOTAL.
DATA HOLD_KLIMK LIKE KNKK-KLIMK.
DATA HOLD_KLIMK2(22) TYPE C.
DATA HOLD-CTLPC LIKE KNKK-CTLPC.
DATA HOLD-CTLPC-TEXT LIKE T691T-RTEXT.
DATA HOLD_ZTERM LIKE KNVV-ZTERM.
DATA TOTAL_RAST7 TYPE P.
DATA TOTAL_RAST2 TYPE P.
DATA TOTAL_RAST3 TYPE P.
DATA TOTAL_RAST4 TYPE P.
DATA TOTAL_RAST5 TYPE P.
DATA TOTAL_RAST6 TYPE P.
DATA TOTAL_RAST1 TYPE P.
DATA HOLD_BUKRS2 LIKE T001-BUKRS.
DATA HOLD_KKBER LIKE BSID-KKBER.
DATA HOLD_KKBER_DESC LIKE T014T-KKBTX.
DATA HOLD_KKBER_DESC2 LIKE T014T-KKBTX.
DATA HOLD_KUNNR2 LIKE KNA1-KUNNR.
DATA L_FIRST_DAY_OF_FISCAL LIKE SY-DATUM. "tonyc issue #3047
DATA: STAB TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
RTOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
STOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
OP,
MAXMANDT LIKE DD_STIDA,
MAXMANST TYPE P,
SUMKLIMB TYPE P,
SUMVLIBB TYPE P,
VERZUG TYPE P,
OBAD TYPE P,
BLOCK_CNT TYPE P,
INTENS,
ONEBYTE(1) TYPE C,
TAGE1A LIKE RFPDO1-ALLGFAEL,
TAGE2A LIKE RFPDO1-ALLGFAEL,
TAGE3A LIKE RFPDO1-ALLGFAEL,
HOLD_KUNNR LIKE KNA1-KUNNR, "tonyc
HOLD_SUPER LIKE KNA1-KUNNR, "tonyc
HOLD_REP2 LIKE KNA1-KUNNR, "tonyc
SUPER_REP LIKE KNA1-KUNNR, "tonyc
TEMP_TELF1 LIKE KNA1-TELF1, "JAM
IT_T014 LIKE T014 OCCURS 0 WITH HEADER LINE, "JAM
G_KLIMK_TXT LIKE GTAB-KLIMK_TXT, "JAM
G_WAERS LIKE GTAB-WAERS, "JAM
G_CONT_NAME(50) TYPE C. "JA
DATA FILL_REP_INFO.
BC SUNILP 05/14/2007
DATA: BEGIN OF ITAB_VBRP OCCURS 0.
INCLUDE STRUCTURE VBRP.
DATA: END OF ITAB_VBRP.
DATA: T_PERC TYPE F,
SUM_NETWR LIKE VBRP-NETWR.
*DATA: GTAB_LINES LIKE GTAB OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF GTAB_LINES OCCURS 0.
INCLUDE STRUCTURE GTAB.
DATA: IND(1),
OBAD TYPE P.
DATA: END OF GTAB_LINES.
DATA: BEGIN OF ITAB_VBRP1 OCCURS 0,
VBELN LIKE VBRP-VBELN,
NETWR LIKE VBRP-NETWR,
ZZMREP LIKE VBRP-ZZMREP, "Super Rep
ZZLREP LIKE VBRP-ZZLREP, "Rep
PERC TYPE F,
END OF ITAB_VBRP1.
EC SUNILP 05/14/2007
BEGIN_OF_BLOCK 2.
PARAMETERS: REGIO LIKE KNA1-REGIO.
PARAMETERS: CONSOL AS CHECKBOX. "TONYC
PARAMETERS: P_KKBER AS CHECKBOX, "TONYC
P_CONV AS CHECKBOX. "tonyc issue #3047
PARAMETERS: SUMMEN LIKE RFPDO1-ALLGSUMM,
TAGE1 LIKE RFPDO1-ALLGFAEL DEFAULT '30',
TAGE2 LIKE RFPDO1-ALLGFAEL DEFAULT '60',
TAGE3 LIKE RFPDO1-ALLGFAEL DEFAULT '90',
TAGE4 LIKE RFPDO1-ALLGFAEL DEFAULT '120'.
END_OF_BLOCK 2.
BEGIN_OF_BLOCK 3.
SELECT-OPTIONS: P_SUPREP FOR KNVP-KUNNR, "Super REP "DEVK939546
P_REP FOR KNVP-KUNNR, "SALES REP "DEVK939546
P_VKORG FOR TVKO-VKORG, "TONYC ISSUE 4743
P_LOTKZ FOR BKPF-LOTKZ. "TONYC ISSUE 4743
END_OF_BLOCK 3.
INITIALIZATION. "JAM
PERFORM LOAD_T014. "JAM
refresh dd_augdt.
clear dd_augdt.
dd_augdt-option = 'EQ'.
dd_augdt-sign = 'I'.
dd_augdt-low = ' '.
append dd_augdt.
AT SELECTION-SCREEN.
IF CONSOL = 'X'.
IF NOT P_SUPREP[] IS INITIAL. "DEVK939546
MESSAGE E999 WITH 'Consolidated report not allowed w/ Super Rep'.
ENDIF.
ENDIF.
CHECK IF THE REP INFO IS ADDED OR NOT - VS
IF NOT P_SUPREP IS INITIAL OR"TONY ISSUE 4743
NOT P_REP IS INITIAL."TONY ISSUE 4743
FILL_REP_INFO = 'X'."TONY ISSUE 4743
ENDIF."TONY ISSUE 4743
START-OF-SELECTION.
get_frame_title 2.
add function module to track usage JD 10/13/98 *****
CALL FUNCTION 'Z_RUN_LOG'
EXCEPTIONS
OTHERS = 1.
*IF NOT P_SUPREP IS INITIAL AND NOT P_REP IS INITIAL.
P_SUPREP = ' '.
*ENDIF.
GET KNA1 FIELDS LAND1 REGIO KUNNR NAME1 NAME2 ORT01 TELF1. "JAM
new-page.
skip.
TEMP_TELF1 = KNA1-TELF1.
MAXMANDT = '19000101'.
MAXMANST = 0.
SUMVLIBB = 0.
PERFORM GET_CUST_CONTACT. "JAM
Check sales rep- NES071797
Get any valid record and exit.
IF NOT p_suprep[] IS INITIAL. "DEVK939546 "TONY ISSUE 4743 start
good_super_rep = ' '.
SELECT kunn2 INTO super_rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZS' AND
kunn2 IN p_suprep.
EXIT.
ENDSELECT.
IF sy-subrc = 0.
good_super_rep = 'X'.
gtab-super = super_rep.
super_rep = ' '.
ENDIF.
CHECK good_super_rep = 'X'.
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ELSEIF NOT p_rep[] IS INITIAL. "DEVK939546
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ENDIF. "TONY ISSUE 4743 end
GET KNB1 FIELDS BUKRS VLIBB ZTERM. "tonyc #2500
GTAB-BUKRS = KNB1-BUKRS.
GTAB-ZTERM = KNB1-ZTERM.
SUMVLIBB = SUMVLIBB + KNB1-VLIBB.
GET KNB5.
IF KNB5-MADAT > MAXMANDT.
MAXMANDT = KNB5-MADAT.
ENDIF.
IF KNB5-MAHNS > MAXMANST.
MAXMANST = KNB5-MAHNS.
ENDIF.
SUMKLIMB = SUMKLIMB + KLIMB.
GET BSID.
CHECK BSID-BSTAT = SPACE.
field was intended for Business Area, changed to use Currency
GTAB-GSBER = BSID-WAERS.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF BSID-KKBER = ' '.
GTAB-KKBER = BSID-BUKRS.
ELSE.
GTAB-KKBER = BSID-KKBER. "TONYC ISSUE #2500
ENDIF.
ENDIF. "TONYC ISSUE #2500
SELECT SINGLE * FROM BKPF "TONY ISSUE 4743
WHERE BUKRS = BSID-BUKRS "TONY ISSUE 4743
AND BELNR = BSID-BELNR "TONY ISSUE 4743
AND GJAHR = BSID-GJAHR. "TONY ISSUE 4743
BC SUNILP 05/14/2007
IF BKPF-XREF2_HD IS NOT INITIAL.
CHECK BKPF-XREF2_HD IN P_SUPREP. "TONY ISSUE 4743
ELSE.
IF P_REP[] IS INITIAL.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-SUPER = BKPF-XREF2_HD. "TONY ISSUE 4743 "MOVE THE CONTENTS OF XREF2_HD TO GTAB INTERNAL TABLE - VS
ENDIF.
BC SUNILP 05/14/2007
IF BKPF-XREF1_HD IS NOT INITIAL.
CHECK BKPF-XREF1_HD IN P_REP. "TONY ISSUE 4743 " ELSE MOVE THE CONTENTS OF - VS
ELSE.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-REP = BKPF-XREF1_HD. "TONY ISSUE 4743
ENDIF.
CHECK BKPF-LOTKZ IN P_LOTKZ. "TONY ISSUE 4743
CHECK BKPF-BRNCH IN P_VKORG. "TONY ISSUE 4743
SELECT SINGLE FILKD INTO GTAB-FILKD FROM BSEG
WHERE BUKRS = BSID-BUKRS
AND BELNR = BSID-BELNR
AND GJAHR = BSID-GJAHR
AND BUZEI = BSID-BUZEI.
gtab-gsber = bsid-gsber.
get rep info for each bsid record
IF NOT P_SUPREP IS INITIAL. "tonyc
SELECT KUNNR FROM VBPA INTO HOLD_REP UP TO 1 ROWS "tonyc
WHERE VBELN = BSID-VBELN "tonyc
AND PARVW = 'ZR'. "tonyc
ENDSELECT. "tonyc
IF NOT P_REP IS INITIAL. "tonyc
CHECK HOLD_REP = P_REP. "tonyc
ENDIF. "tonyc
GTAB-REP = HOLD_REP. "tonyc
HOLD_REP = ' '. "tonyc
ENDIF. "tonyc
PERFORM GET_KNKK_INFO. "JAM
GTAB-KLIMK_TXT = G_KLIMK_TXT.
GTAB-WAERS = G_WAERS.
GTAB-LAND1 = KNA1-LAND1.
GTAB-REGIO = KNA1-REGIO.
GTAB-KUNNR = KNA1-KUNNR.
GTAB-NAME1 = KNA1-NAME1.
GTAB-NAME2 = KNA1-NAME2.
GTAB-ORT01 = KNA1-ORT01.
*if there is no phone number for the contact, pull the phone
*number from the sold-to
IF KNVK-TELF1 = ' '.
GTAB-TELF1 = TEMP_TELF1.
ELSE.
GTAB-TELF1 = KNVK-TELF1. "JAM
ENDIF.
GTAB-CONT_NAME1 = KNVK-NAME1.
GTAB-NAMEV = KNVK-NAMEV.
verzug = bsega-netdt - dd_stida.
VERZUG = DD_STIDA - BSEGA-NETDT. "days past due calculation
OP = 'X'.
GTAB-RAST2 = GTAB-RAST3 = GTAB-RAST4 = 0.
GTAB-RAST5 = GTAB-RAST6 = OBAD = GTAB-RAST7 = 0.
IF VERZUG LE 0. "future due
GTAB-RAST1 = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE1. "past due 1 to tage1 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST2 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE2. "past due tage1 to tage2 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST3 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE3. "past due tage2 to tage3 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST4 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE4. "past due tage3 to tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST5 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG GT TAGE4. "past due > tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST6 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
GTAB-RAST7 = GTAB-RAST1 - OBAD.
stab = gtab.
MOVE-CORRESPONDING GTAB TO STAB.
BC SUNILP 05/15/2007
IF ITAB_VBRP1[] IS NOT INITIAL.
GTAB-T_IND = 'X'.
LOOP AT ITAB_VBRP1.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-SORT_GSB = '1'.
GTAB_LINES-SUPER = ITAB_VBRP1-ZZMREP.
GTAB_LINES-REP = ITAB_VBRP1-ZZLREP.
GTAB_LINES-RAST1 = GTAB_LINES-RAST1 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST2 = GTAB_LINES-RAST2 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST3 = GTAB_LINES-RAST3 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST4 = GTAB_LINES-RAST4 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST5 = GTAB_LINES-RAST5 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST6 = GTAB_LINES-RAST6 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST7 = GTAB_LINES-RAST7 * ITAB_VBRP1-PERC.
GTAB_LINES-OBAD = GTAB_LINES-OBAD * ITAB_VBRP1-PERC.
COLLECT: GTAB_LINES.
ENDLOOP.
ELSE.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-T_IND = 'X'.
GTAB_LINES-SORT_GSB = '1'.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB_LINES.
ENDIF.
ENDIF.
EC SUNILP 05/15/2007
gtab-sort_gsb = stab-sort_gsb = '0'.
collect: gtab, stab.
gtab-gsber = stab-gsber = '****'.
GTAB-SORT_GSB = '1'.
IF REGIO = SPACE OR REGIO = GTAB-REGIO.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB, STAB.
ENDIF.
ENDIF.
END-OF-SELECTION.
TAGE1A = TAGE1 + 1.
TAGE2A = TAGE2 + 1.
TAGE3A = TAGE3 + 1.
IF SUMMEN = ' '.
sort gtab by bukrs land1 regio kunnr gsber sort_gsb.
sort gtab by bukrs land1 regio name1 kunnr gsber sort_gsb. "JAM
IF CONSOL = 'X'.
SORT GTAB BY LAND1 REGIO NAME1 KUNNR BUKRS KKBER GSBER SORT_GSB.
"TONYC
REPORT_TYPE = 'consolidated'.
ELSEIF NOT P_SUPREP[] IS INITIAL. "DEVK939546
SORT GTAB
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'super rep'.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSEIF NOT P_REP[] IS INITIAL. "DEVK939546
SORT GTAB "DEVK939546
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
"DEVK939546
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'rep'. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSE.
SORT GTAB BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'regular'.
ENDIF.
BC SUNILP 05/15/2007
DELETE ADJACENT DUPLICATES FROM GTAB COMPARING BUKRS NAME1.
LOOP AT GTAB_LINES.
IF P_REP[] IS INITIAL.
IF GTAB_LINES-SUPER NOT IN P_SUPREP.
DELETE GTAB_LINES.
ENDIF.
ELSE.
IF GTAB_LINES-SUPER NOT IN P_SUPREP OR GTAB_LINES-REP NOT IN P_REP.
DELETE GTAB_LINES.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT GTAB.
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
IF SY-SUBRC NE '0'.
DELETE GTAB.
ENDIF.
ENDLOOP.
EC SUNILP 05/15/2007
LOOP AT GTAB.
MOVE GTAB-BUKRS TO T001-BUKRS. READ TABLE T001.
RESERVE 5 LINES.
CASE REPORT_TYPE.
WHEN 'regular'.
IF HOLD_BUKRS <> GTAB-BUKRS.
IF SY-TABIX > 1. "TONYC
NEW-PAGE. SKIP. "TONYC
ENDIF. "TONYC
ENDIF.
PERFORM WRITE_CUST_INFO. "TONYC
PERFORM WRITE_DETAIL.
hold_bukrs = gtab-bukrs. "tonyc
WHEN 'consolidated'.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL.
WHEN 'super rep'.
IF GTAB-T_IND NE 'X'.
BC SUNILP 05/22/2007
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
EC SUNILP 05/22/2007
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
WRITE :/. "TONYC
ULINE. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL. "TONYC
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
AT END OF SUPER. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Super Rep:', "DEVK939546
GTAB-SUPER, '/', SUPER_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES STOT. "DEVK939546
REFRESH STOT. "DEVK939546
ENDAT. "DEVK939546
ELSE.
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB_LINES-KUNNR.
WRITE :/.
ULINE.
PERFORM WRITE_CUST_INFO.
ENDIF.
HOLD_KUNNR = GTAB_LINES-KUNNR.
PERFORM WRITE_DETAIL.
AT END OF REP.
SKIP.
RESERVE 7 LINES.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Rep:',
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES RTOT.
REFRESH RTOT.
ENDAT.
AT END OF SUPER.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Super Rep:',
GTAB_LINES-SUPER, '/', SUPER_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STOT.
REFRESH STOT.
ENDAT.
ENDLOOP.
ENDIF.
WHEN 'rep'. "DEVK939546
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF HOLD_REP2 <> GTAB_LINES-REP. "DEVK939546
NEW-PAGE. "DEVK939546
PERFORM GET_AND_WRITE_REPINFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_REP2 = GTAB_LINES-REP. "DEVK939546
IF HOLD_KUNNR <> GTAB_LINES-KUNNR. "DEVK939546
WRITE :/. "DEVK939546
ULINE. "DEVK939546
PERFORM WRITE_CUST_INFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_KUNNR = GTAB_LINES-KUNNR. "DEVK939546
PERFORM WRITE_DETAIL. "DEVK939546
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
ENDLOOP.
ENDCASE.
ENDLOOP.
ENDIF.
OP = ' '.
REFRESH GTAB.
IF NOT REPORT_TYPE = 'super rep'.
ULINE.
ENDIF.
SKIP 1.
IF SUMMEN = ' '. "if 'output totals only' bypass new-page
NEW-PAGE. SKIP.
ENDIF.
WRITE: /25 TEXT-030, 132 ONEBYTE, /25 TEXT-031, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STAB. "DEVK939546
TOP-OF-PAGE.
INTENS = SPACE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE: / SY-VLINE, 1 TEXT-001, DD_STIDA, 75 TEXT-051, 132 SY-VLINE.
ULINE.
WRITE: / SY-VLINE, 13 SY-VLINE, 30 SY-VLINE,
47 SY-VLINE, 58 TEXT-003, 81 SY-VLINE,
92 TEXT-003, 115 SY-VLINE, 118 TEXT-003, 132 SY-VLINE,
/ SY-VLINE, 02 TEXT-004, 13 SY-VLINE, TEXT-002,
30 SY-VLINE, 32 TEXT-018, 47 SY-VLINE,
50 '1', 54 TEXT-040, 57 TAGE1, 64 SY-VLINE, " 65 tage2,
67 TAGE1A, 72 TEXT-040, 75 TAGE2,
81 SY-VLINE, 83 TAGE2A, 89 TEXT-040, 91 TAGE3, 98 SY-VLINE,
101 TAGE3A, 107 TEXT-040, 110 TAGE4, 115 SY-VLINE,
117 TAGE4, 123 TEXT-017, 132 SY-VLINE.
ULINE.
SKIP 1.
SUMMARY.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
FORM write_tots *
--> PTAB *
FORM WRITE_TOTS TABLES PTAB TYPE TOT_TAB. "DEVK939546
CLEAR INTENS. "DEVK939546
FORMAT COLOR COL_HEADING INTENSIFIED OFF. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
WRITE /4 TEXT-101.
WRITE: /4 TEXT-102,
50 TEXT-100.
ENDIF. "tonyc issue #3047 end
ULINE. "DEVK939546
SORT PTAB BY BUKRS GSBER. "DEVK939546
LOOP AT PTAB. "DEVK939546
IF SY-TABIX > 1.
WRITE_TOTAL = 'X'.
ENDIF.
MOVE PTAB-BUKRS TO T001-BUKRS. READ TABLE T001. "DEVK939546
MOVE PTAB-GSBER TO T001-WAERS. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
PERFORM CONVERT_VALUES USING STAB-RAST1
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST2
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST3
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST4
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST5
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST6
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST7
STAB-GSBER.
ENDIF. "TOnyc issue #3047 end
MOVE-CORRESPONDING PTAB TO STAB.
COLLECT STAB.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
CLEAR HOLD_KKBER_DESC2.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC2 FROM T014T
WHERE KKBER = STAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC2 = 'Undetermined'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 6 STAB-GSBER, HOLD_KKBER_DESC2, SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
IF P_CONV = 'X'. "tonyc issue #3047 begin
T001-WAERS = 'USD'.
ENDIF. "tonyc issue #3047 end
WRITE: 13 STAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
HOLD_BUKRS2 = STAB-BUKRS. "TONYC ISSUE #2500
ULINE.
FORMAT COLOR OFF.
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
IF INTENS = SPACE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
INTENS = 'X'. "DEVK939546
ELSE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "DEVK939546
INTENS = SPACE. "DEVK939546
ENDIF. "DEVK939546
WRITE: / SY-VLINE, PTAB-BUKRS, PTAB-GSBER, SY-VLINE, "DEVK939546
(14) PTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE."DEVK939546
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ENDIF.
ENDLOOP. "DEVK939546
ULINE. "DEVK939546
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF P_CONV = 'X'. "tonyc issue #3047 begin
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF. "tonyc issue #3047 end
ELSE.
IF P_CONV = 'X'.
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF.
ENDIF.
SKIP 1. "DEVK939546
ENDFORM. "DEVK939546
*& Form GET_KNKK_INFO
text
--> p1 text
<-- p2 text
FORM GET_KNKK_INFO.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
get credit control area (KKBER) for comp code (BUKRS)
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = T001-KKBER.
IF SY-SUBRC = 0.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = T001-KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ENDIF.
ENDFORM. " GET_KNKK_INFO
*& Form SELECT_KNKK
text
-->P_KKBER Credit Limit Controlling AreaThis is a FI Aging report.
-
Exchange 2013 Delivery Reports not working correctly
Hello,
I'm trying to use the "delivery reports" tool in ECP and it is not acting normally. Here's the situation:
When I try to search a mailbox ([email protected]) for mails that were sent to [email protected] (a distribution group) I only see results that were sent from [email protected] to [email protected] Not all the messages in [email protected]'s mailbox that were sent to [email protected]
So in summary, instead of showing all messages in that mailbox, it shows me all messages on [email protected]'s mailbox that were sent by [email protected] to [email protected]
I have used Exchange Online, which should be almost the same as Exchange 2013 but this was not the behavior before. Can this be a wrong setting somewhere? Can it be related to anti-spam (GFI) software on the serer? Any ideas?Hi,
How did you use delivery reports tool to track messages ? Is it like below?
*Mailbox to Search: [email protected]
Search for messages sent to: [email protected]
In general, it will show all the messages in [email protected] which were sent to
[email protected], however, if the mailbox has applied any retention policys to delete emails or move the emails to local pst, it may cause your issue.
More information about "Delivery Reports" for your reference:
Track Messages with Delivery Reports
Thanks.
Niko Cheng
TechNet Community Support -
This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Delivery reports are not received to MMS which are...
Hi,
I am currently using a nokia supernova 7210 handset & I am able to send & receive MMs without any problems .
but the delivery reports are not received by the senders for the MMs which are sent to me.
In MMS settings , I have configured to retrieve incoming MMS messages.
The delivery reports are received by the senders if retrieve MMs manually.
Please let me know if anyone knows the answer for this.
thanks.DB version :
SQL> select * from v$version;
BANNER
Oracle7 Server Release 7.3.4.3.0 - Production
PL/SQL Release 2.3.4.3.0 - Production
CORE Version 3.5.4.0.0 - Production
TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
NLSRTL Version 3.2.4.0.0 - Production
Alert log :
SID>tail -f alert_SID.log
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 15:09:18 2012
create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10 0m
Tue Sep 25 15:09:27 2012
Completed: create tablespace tbs datafile '/stage/software/AP...
Trace file :
SID>tail -f ora_84426_aprd.trc
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 119654
Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d367 file=33. blocknum=119655. found same corupted
For this above :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
SEGMENT_TYPE OWNER
SEGMENT_NAME
TABLE GL
GL_JE_LINES
Regards
Hamid -
Report to get the Material with Exception message"10" Rescheduling in
Hello All
We want to get the report to get the materials with exception message"10".We can get deatils from T code MD06,but it is restricted to MRP Controller/Vendor and we can get the details from Table "MDKP".Plese provide any report or T code to get the details of the exception message "10"
Thanks
Suresh kumarHello
You can use BAPI_MATERIAL_STOCK_REQ_LIST todata from MD04 or BAPI_MATERIAL_MRP_LIST to get data from MD05.
BR
Catano
Maybe you are looking for
-
Remote app on iphone 5: Why are songs gray?
So I just got an Airport Express and the Remote app. In the app, 80% of my songs are gray and I am unable to add them to "Up next," but I can still play them when selected individually. Any ideas what's up? -G
-
Problem in Front end with BW3.5
hi friends, now I am using BI 7.0 with front end BW3.5, it looks good. when i open the BEx, it didnot work...I think there is a component missing... If i use BI 7.0 as front end, I know that will be work.... I want to call BEx from citrix environment
-
1.how i can create custom vendor my xk01 or other code,is ther any tab for for assign vendor number in PO condition type. 2.first i have done miro for custom duty ie basic custom duty(CVD),2% cvd, 1% cvd, 4 percent additional import duty, how i will
-
How to Make the label of the active tab-page BOLD?
Hi All I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform. My requirement is to make the label of the active tab-page either in italics or with a different color or m
-
Designer6i: About templates and style sheets. Web PL/SQL
Preference About Page template filename How Use this preference to identify a document template for the About Page