Getting msg Error 1.1 at .\sdk_data.cpp line 1384 when trying to sync w/notes

Is this a corrupted record in my calender file w/in Notes?

This is not about Windows calendar. It is about Lotus Notes calendar which is supported.
I have now recreated my mail replica, run a program to remove large emails and to compress etc. I deleted the last calendar entry in the trace so now it stops after the penultimate one. To me that means it is either failing on the next one which is not in the trace, or it's failing on the next stage. I've tried using ODSViewer.exe and searching for the hex strings but I don't find them. This may not be surprising as the trace sort of says it can't find them either. Here's the end of the trace. I've also reset it and set it to say one way sync overwriting the blackberry. Any ideas?
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : B e g i n R e a d R e c o r d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ E 4 1 D 8 1 8 9 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 5 F 1 8 4 7 7 5 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 8 0 2 5 7 3 0 7 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 0 0 5 D 5 6 E D ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D v a l u e = [ E 4 1 D 8 1 8 9 5 F 1 8 4 7 7 5 8 0 2 5 7 3 0 7 0 0 5 D 5 6 E D ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t i n g a n a l i s y s o n p a r e n t / n o n - r e p e a t d o c u m e n t : 0 x b 1 3 a , E 4 1 D 8 1 8 9 5 F 1 8 4 7 7 5 8 0 2 5 7 3 0 7 0 0 5 D 5 6 E D
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y c r e a t e d t h e 1 - 1 m a p p i n g !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 F i e l d R e s c h e d u l e W h i c h i s N O T p r e s e n t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 L o t u s N o t e s e r r o r : 0 x 2 2 2 - N o t e i t e m n o t f o u n
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 3 4 9 0 5 E D 2 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 3 8 2 7 E 8 4 E ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 8 0 2 5 7 3 0 7 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 0 0 5 D D 5 6 E ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D v a l u e = [ 3 4 9 0 5 E D 2 3 8 2 7 E 8 4 E 8 0 2 5 7 3 0 7 0 0 5 D D 5 6 E ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 R e s p o n s e M a n a g e r : : P r o c e s s i n g n e w n o t i c e d o c u m e n t : 0 x b 3 0 6 , 3 4 9 0 5 E D 2 3 8 2 7 E 8 4 E 8 0 2 5 7 3 0 7 0 0 5 D D 5 6 E
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 A g e n t s u c c e s s f u l l y i n i t i a l i z e d !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 A g e n t s u c c e s s f u l l y i n i t i a l i z e d !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L R e p e a t E n t r y F i e l d B r i d g e : : c o n v e r t L N F i e l d s T o I S F i e l d s
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L R e p e a t E n t r y F i e l d B r i d g e : : c o n v e r t L N F i e l d s T o I S F i e l d s
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 D o c u m e n t O w n e r s h i p M a p h a s b e e n u p d a t e d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 C u r r e n t e x p o r t e d r e c o r d i s :
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - . S t a t e : C H A N G E D
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t D a t e = 2 0 0 7 0 7 2 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t T i m e = 1 2 0 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d D a t e = 2 0 0 7 0 7 2 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d T i m e = 1 3 0 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 $ A l a r m = 1
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 $ A l a r m D a t e = 2 0 0 7 0 7 2 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 $ A l a r m T i m e = 1 1 3 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u b j e c t = D i s c u s s d e p l o y m e n t o f I B M s o f t w a r e - w h a t y o u o w n a n d h o w y o u ' r e u s i n g i t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B o d y =
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 O r g C o n f i d e n t i a l = 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 L o c a t i o n = C h a s e s i d e
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 M e e t i n g A t t e n d e e s = 9 8 = \ , 8 8 = C N = S a m G a r f o r t h / O U = U K / O = I B M \ , 2 2 2 = 1 \ , 1 0 8 = L N O T E S \ , 1 2 2 = 0 \ , 0 1 1 = 1 ; 9 8 = \ , 8 8 = p a u l . f r o s t @ j p m o r g a n . c o m \ , 2 2 2 = 0 \ , 1 0 8 = S M T P \ , 1 2 2 = 0 \ , 0 1 1 = 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 N o n r e p e a t i n g i t e m .
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - . S t a t e : C H A N G E D
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : B e g i n R e a d R e c o r d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y r e a d t h e a t t e n d e e s f i e l d !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : R e a d F i e l d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L R e p e a t B a s e d S e c t i o n : : G e t R e p e a t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E x p o r t M e d i a t o r : : g e t R e p e a t - N o r e p e a t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L R e p e a t B a s e d S e c t i o n : : G e t R e p e a t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : E n d R e a d R e c o r d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L S e c t i o n : : E n d R e a d R e c o r d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L S e c t i o n : : B e g i n R e a d R e c o r d
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ E F 1 A 5 9 1 5 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 4 5 B E C 0 7 5 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 8 0 2 5 7 4 4 3 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 0 0 5 6 2 F 3 0 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D v a l u e = [ E F 1 A 5 9 1 5 4 5 B E C 0 7 5 8 0 2 5 7 4 4 3 0 0 5 6 2 F 3 0 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t i n g a n a l i s y s o n p a r e n t / n o n - r e p e a t d o c u m e n t : 0 x 1 0 6 7 a , E F 1 A 5 9 1 5 4 5 B E C 0 7 5 8 0 2 5 7 4 4 3 0 0 5 6 2 F 3 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 2 D C C 4 8 0 5 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 3 7 1 4 D 0 7 5 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 8 0 2 5 7 4 4 2 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 0 0 6 7 E 1 E 0 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D v a l u e = [ 2 D C C 4 8 0 5 3 7 1 4 D 0 7 5 8 0 2 5 7 4 4 2 0 0 6 7 E 1 E 0 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t i n g a n a l i s y s o n p a r e n t / n o n - r e p e a t d o c u m e n t : 0 x 1 1 3 6 e , 2 D C C 4 8 0 5 3 7 1 4 D 0 7 5 8 0 2 5 7 4 4 2 0 0 6 7 E 1 E 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 F i e l d R e p e a t W e e k e n d s i s N O T p r e s e n t
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 L o t u s N o t e s e r r o r : 0 x 2 2 2 - N o t e i t e m n o t f o u n
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 F a i l e d t o r e a d , b a i l i n g R e p e a t W e e k e n d s : - 2 0 8 8 4 3 5 1 6 6
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 D e b u g a s s e r t i o n : [ . \ L D a i l y R e p e a t P a t t e r n . c p p : 5 7 ] f o r C o n d i t i o n : 0
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 T h e b a s e L R e p e a t P a t t e r n : : i n i t i a l i z e F r o m L N m e t h o d f a i l e d . B a i l i n
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E r r o r o c c u r e d w h i l e i n i t i a l i z i n g t h e r e p e a t p a t t e r n ! T r y i n g w i t h u n s u p p o r t e d .
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 1 A D A 3 F 9 6 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 1 F A 8 C 9 7 F ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 8 0 2 5 7 4 4 2 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D H e x v a l u e = [ 0 0 6 7 E 1 F 4 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 I D v a l u e = [ 1 A D A 3 F 9 6 1 F A 8 C 9 7 F 8 0 2 5 7 4 4 2 0 0 6 7 E 1 F 4 ]
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L T o o l k i t : : L T o o l k i t : : c n v U N I D t o H e x S T R
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 U n s u p p o r t e d R e p e a t S t a t e : : P r o c e s s i n g n e w c h i l d d o c u m e n t : 0 x 1 1 3 7 2 , 1 A D A 3 F 9 6 1 F A 8 C 9 7 F 8 0 2 5 7 4 4 2 0 0 6 7 E 1 F 4
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 g e t U n u s e d O n e T o O n e M a p p i n g - c r e a t i n g a n e w O n e I s T o O n e L N m a p p i n g
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 g e t U n u s e d O n e T o O n e M a p p i n g - c r e a t i n g a n e w O n e I s T o O n e L N m a p p i n g
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S t a r t i n g t o e x p o r t I S r e c o r d s
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y r e a d t h e r e p e a t s t a r t d a t e s !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y r e a d t h e r e p e a t e n d d a t e s !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 A g e n t s u c c e s s f u l l y i n i t i a l i z e d !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 B e g i n - L R e p e a t E n t r y F i e l d B r i d g e : : c o n v e r t L N F i e l d s T o I S F i e l d s
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 E n d - L R e p e a t E n t r y F i e l d B r i d g e : : c o n v e r t L N F i e l d s T o I S F i e l d s
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y r e a d t h e r e p e a t s t a r t d a t e s !
2 0 0 8 / 0 9 / 0 8 1 8 : 1 8 . 1 6 S u c c e s s f u l l y r e a d t h e r e p e a t e n d d a t e s !

Similar Messages

Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it    LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well..   I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayR

Hi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR

I get the following error message when trying to sync "could not be synced because the sync session failed to finish"

hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

Internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401 when burning DVD with sl

I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401

This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
hope this help someone else skip the frustration i had.

I recently updated my iPad and when I went back to read a book that I had purchased now I'm getting an error message where whole chapters are missing. I tried re-syncing with my mac book and no luck. Any help to restore my book?

I recently updated my iPad and when I went back to read a book that I had purchased I'm getting error messages and whole chapters are missing. I tried re-syncing with my mac book and nothing changed. Any help to restore my book completely?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, you'll need to do a time-consuming "Restore."

Keep getting DataSource.Error: SapBusinessObjects: Request failed (BadRequest): An exception occurred. when trying to use BOBJ universe as source

I have been able to successfully connect to our BOE environment and to one of our universes. I keep getting the following error. When editing the query, as I expand and collapse various dimensions / measures, I will see data at one point and
then as I expand/collapse various combinations of data I get this error. I can't figure out the underlying issue that causes this error to appear and disappear. Help!
DataSource.Error: SapBusinessObjects: Request failed (BadRequest): An exception occurred.
Details:
http://michgbo41d:6405/biprws/sl/v1/queries/6677718407783479088/...

Hi,
The generic error message you received was sent back from the service. We'll need more information about your specific query to investigate the problem. Would you be able to report the issue through Power Query's "Send Feedback > Send a Frown" button?
If so, please make sure to also include the information you have here along with the email.
Thanks!
Tristan

I get an error message File too large for formatted drive when trying to copy a large video file (~50GB) to a new 64 GB USB drive. Any thoughts?

I am copying from a MAC to the new drive - not sure the format of the USB drive, whatever the SANDISK Cruzer is default formatted to..

You state that Cruzer is formatted which is proably FAT32. FAT32 has limits on file size of 4 GB.
Since you are copying larger files then you will need to reformat.
Allan

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

I am getting an error msg when trying to sync with I Tunes???

I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes. This just started today
Also would like to know how to find my passcode for Restrictions without restore the whole phone.

I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
http://support.apple.com/kb/TS3221
Also would like to know how to find my passcode for Restrictions without restore the whole phone.
Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217

I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEX

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Internal Software Error:.\Vobulator\Titleplaner\CVOBUPlanner.cpp,Line 331

I am very frustrated...
I am using Encore CS3 on a relatively fast system with 2g of ram. I have successfully burned disc using Encore CS3 but it is a crap-shoot. Sometimes it works and half of the time I get this:
Internal Software Error:.\Vobulator\Titleplaner\CVOBUPlanner.cpp,Line 331
I am trying to burn a simple disc - nothing crazy. A static menu with three chapters linked to 3 points on a 1hour and 45minute avi file in the timeline. I organize it check the project and everything is fine. I start the build and it begins to transcode - everthing is still good. After the transcode it begins to organize the disc or something - and that is when I get the error message.
I click OK on the dialog box and notice that the video in the timeline is now only 5 frames long and the audio is still there. (I thought the video had totally dissapeared but when I zoomed in for a closer look I realized it had ben reduced from almost 2 hours to 5 frames.) I look to the project window and it shows that the AVI has been transoded and it shows that time of the transoded file is normal length.... I am lost.
Anyone have any ideas?
Mat Cain

Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Also, for Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS

Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530

I am trying to make a movie and burn it to a disk for school but I keep getting that error (Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530) It occures after about 5 or 10 minutes of transcoding. The original file was a mkv file format with a dts audio and a avs video track.
Here is the detail of the video.
Format                           : Matroska
Format version                   : Version 2
File size                        : 6.56 GiB
Duration                         : 2h 10mn
Overall bit rate                 : 7 197 Kbps
Encoded date                     : UTC 2011-10-26 03:46:55
Writing application              : mkvmerge v4.8.0 ('I Got The...') built on May 24 2011 03:12:58
Writing library                  : libebml v1.2.0 + libmatroska v1.1.0
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 5 frames
Muxing mode                      : Header stripping
Codec ID                         : V_MPEG4/ISO/AVC
Duration                         : 2h 10mn
Bit rate                         : 5 689 Kbps
Width                            : 1 280 pixels
Height                           : 528 pixels
Display aspect ratio             : 2.40:1
Frame rate                       : 23.976 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.351
Stream size                      : 5.05 GiB (77%)
Writing library                  : x264 core 119 r2106 07efeb4
Encoding settings                : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=5689 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language                         : English
Audio
ID                               : 2
Format                           : DTS
Format/Info                      : Digital Theater Systems
Muxing mode                      : Header stripping
Codec ID                         : A_DTS
Duration                         : 2h 10mn
Bit rate mode                    : Constant
Bit rate                         : 1 510 Kbps
Channel(s)                       : 6 channels
Channel positions                : Front: L C R, Side: L R, LFE
Sampling rate                    : 48.0 KHz
Bit depth                        : 24 bits
Compression mode                 : Lossy
Stream size                      : 1.38 GiB (21%)
Language                         : English
Knowing that Encore does not support mkv I demuxed the mkv taking out the video track into a .h264 file using mkvextract. I then muxed it into a mp4 without the audio using mp4box then dragged it into encore without any problems. For the audio, I just demuxed it out into a dts and dragged that in as well. I then created a new timeline and dragged each peice of media into there corresponding sections on the time line. I tried to play the video but there was no audio. I treid to import the dts and got a warning saying something like, "DTS is supported in this version of Encore (CS5) but just not in preview. When I burn it to the disk there will be no problems" So I just went ahead and tried to build the video into a dvd folder for a dual layer disk.
The setting I have for the DVD is default except I changed the bitrate to 9.4mbps. That's the only thing I changed. (I used NTSC)
I played the audio using an external player to see if it plays and it did. When I check to see if there is any problems with the build it only says something about start remote and end action. I have never set them before so I don't think that should matter.
I have Encore installed on my secondary drive (Not C: which is windows) and I treid to create the DVD Folder on that drive. When I got this problem I just thought it was that it could not create the files on the drive because the program isn't running off that drive which it should be, I treid to create the DVD Folder on the C: drive and I still revieve the same error.
Does anyone know how I can get past this? I need this to be done by tomorrow for school in the morning.

Hi Stan and thank you for your concern, I was (I am) getting that in a timeline. and also a kind of general error when I was trying to build ether a folder or an image. I had made a copie of the project for me to delete all menus I also change all "end actions" who were on "stop" configuration but still my problem was there. In this project in encore two things I did witch may be the coz ot the problem?
-first when changing the menu styls and edition with Ps (maybe I did some thing wrong there?) and
-second when changing throught encore the markers on my principal time line witch maybe a did in a wrong way.
whatsoever thank you and sorry that I took a long time to answer, regarding my english writting you allready undertand that it is not my language. In addition I'm not a professional in editing but I'm still learning. I think it will be quiker for me to do the project again till the start on encore even if for me it wood be good for to know where the problem came from for me not to do it again.
Thanks a lot best regard
Fabian

"internal software error: \VCD\Primo\Primo Target.cpp,line 54" - Encore build DVD

When I'm ready with my Encor proj. to build the DVD, I go in the menu to Build, a popup comes up withe the next text "internal software error: \VCD\Primo\Primo Target.cpp,line 54" and it stops. Building disc is impossible. I've tried it with another (old) project, which is ready (and which I've already made a DVD) it gives the same error.The same error occurs trying to build a folder.

The only google hits for this error are this thread and the other one you found.
http://forums.adobe.com/thread/1274995?tstart=0
Odd error.
A similar error here:
http://forums.adobe.com/message/5736340#5736340
Getting the error building to a folder makes it espcially odd.
I did not find this site the last time, but primo appears to be a company:
http://www.primosoftware.com/

Getting msg Error 1.1 at .\sdk_data.cpp line 1384 when trying to sync w/notes

Similar Messages

Maybe you are looking for