Getting my first BB

Hi,
I am thinking of getting myself a blackberry, however I keep reading that this divice is called curve 9300 3G and in my country it is called Curve 9300 is this the same phone?
http://www.mobitel.si/telefoni-in-naprave/aparati.aspx here is a link to my provider, I know it is in slovenian however I hope someone can help me. 
I also read that this phone runs/will run OS 6 but haven't been able to find anything official and my provider doesn't know either so if somone can confirm that, it would make my desigion a lot easier.
kind regards,
A.S. 

Yes, the "Curve 9300" is the same as the "9300 3G".
It will arrive with OS5 installed on the device, but sooner or later will be upgradable to OS 6, but when your service provider in Slovenia releases OS 6 is impossble for anyone to know.
Does that help?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

    Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
    My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
    Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
    I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
    I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
    Any feedback or assistance is greatly appreciated.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • How can I print Double A4 with HP Officejet 6500? I only get the first page...

    I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
    I can select "Double A4" to print but I only get the first page. So I only have  half a photo.
    What should I do?

    chris
    You can not attach a multi-page .pdf document to Pages.
    Just create a folder in which you enclose both your Pages letter and the .pdf.
    Peter

  • How to get the first and the last record of every month within a time range in sql

    I am trying to get the first record and the last record of each and every month in a given date range using sql. I have a sample code
    where i have just selected everything within the date range now i have to extract the first and the last records of each and every month.
    SELECT PurOrderNum,
    OrderDate
    FROM Purchasing.PurOrder
    WHERE OrderDate >= '2013-02-28'
    AND OrderDate <= '2014-12-29'

    SELECT PurOrderNum,
    OrderDate
    FROM
    SELECT PurOrderNum,
    OrderDate,
    MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
    MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
    FROM Purchasing.PurOrder
    WHERE OrderDate >= '2013-02-28'
    AND OrderDate <= '2014-12-29'
    )t
    WHERE OrderDate = MaxDate
    OR OrderDate = MinDate
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Getting the first row for each group

    Hi Everyone,
    I have a query which returns a number of rows, all of which are valid. What I need to do is to get the first row for each group and work with those records.
    For example ...
    client flight startairport destairport stops
    A fl123 LGW BKK 2
    A fl124 LHR BKK 5
    B fl432 LGW XYZ 7
    B fl432 MAN ABC 8
    .... etc.
    I would need to return one row for Client A and one row for Client B (etc.) but find that I can't use the MIN function because it would return the MIN value for each column (i.e. mix up the rows). I also can use the rownum=1 because this would only return one row rather than one row per group (i.e. per client).
    I have been investigating and most postings seem to say that it needs a second query to look up the first row for each grouping. This is a solution which would not really be practical because my query is already quite complex and incorporating duplicate subqueries would just make the whole thing much to cumbersome.
    So what I really new is a "MIN by group" or a "TOP by group" or a "ROWNUM=1 by group" function.
    Can anyone help me with this? I'm sure that there must be a command to handle this.
    Regards and any thanks,
    Alan Searle
    Cologne, Germany

    Something like this:
    select *
    from (
       select table1.*
       row_number() over (partition by col1, col2 order by col3, col4) rn
       from table1
    where rn = 1In the "partition by" clause you place what you normally would "group by".
    In the "order by" clause you define which will have row_number = 1.
    Edit:
    PS. The [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions004.htm#i81407]docs have more examples on using analytical functions ;-)
    Edited by: Kim Berg Hansen on Sep 16, 2011 10:46 AM

  • Multi mapping after container append operation gets only first message

    XI environment with SP16
    I have a simple integration process scenario with a container operation collecting two messages (identical).
    The input to the interface mapping correctly has 0..outbounded and the map is just a java pass through. The process consists of just one receive step, two container operations, a transformation step and a async send step. The output received only contains the first
    message in the collection.
    Is there any obvious reason why this is happening? (I have checked and rechecked for proper types, attributes, and tested the transformation step individually.
    Thanks in advance for any help.
    Krish

    Hi Henrique,
    Thanks for your response.
    I did have 0..unbounded in the source message settings. (I did see the <Messsages>.. wrapper in the Test tab and in fact it works ok if we use Message Mapping (in my case where multiple messages are of the same type). However, when I have multiple (different) type messages, I got a Mapping..BaseruntimeException even though it worked ok during unit test.
    Now, if I have a Java mapping, it clearly does not pass multiple messages (with 0..unbounded in interface mapping for source). I only get the first in the collection.
    I have a feeling that XI does not do any preprocessing in the case of Java mapping step (including the wrapping of multiple messages). If that is true, then it is a bug.
    Another thing: when I have different type of messages as input - not a collection but distinct message types in the interface mapping - and if I have Java mapping, then I get an error "No Message interface defined for parameter 2" in the workflow log. But I am more concerned with why it does not wrap multiple messages and pass it to the java mapping transformation step.
    Regards,
    Krish

  • How to get the first day in the month from a domain date ?

    Hi,
    I like to know how to get the first day in the month from a domain date?
    Thanks
    Stephen

    Hi Gokul...
    Instead of using the funtion module you can just write the 3 statements of code to get the first day of the week.
    Its similar to the above one but instead of writing case statement you can achive the following.
    data : w_res type i,
             w_data type d,
    w_res = w_date mod 7.
    w_date = w_date - w_res.
    write w_date.
    This works.
    Regards,
    Siddarth

  • How  to  get the FIRST DAY OF THE CURRENT MONTH

    how to get the FIRST DAY OF THE CURRENT MONTH in oracle 9i.
    plzzzzz send immedaily.advance thanks

    TEST@test SQL> select trunc(sysdate,'MON') from dual;
    TRUNC(SYS
    01-OCT-06
    TEST@test SQL>                                  

  • Apple Mail - how to get the first word in a sentence to auto-capitalize

    How to get the first word in a sentence to auto-capitalize
    Anwar

    something to look forward to then, because we get used not to use our shift button any more, since iPhone and iPad do it for us. entourage and other ms stuff do it. pages does it too now (put it on in the auto-correct in preferences). bizarre however some loose the capitalization when you copy the text. pages to stickies or mail does not. that's good !

  • I am using a new Mini Mac via HDMI, I get the First gray screen then nothing else

    I am a First time user of a Mac and I've gone toturn it on fr the first time today, i conected it to a HD ready LCD tv via HDMI and get the first gray 'loading' screen then an 'English' over the speekers then nothing else
    Any help would be apreciated

    Make sure the TV's menu is actually set to connect to that HDMI port.
    Make sure the TV is 1080p and is setup to use that resolution on the HDMI port in question.
    Try zapping the PRAM, by following these instructions:
    http://support.apple.com/kb/ht1379

  • How can I view a PDF file on my IPad? I only get the first page.

    How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

    Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
    There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

  • How to get the first 4 chars form a var ?

    Hi guys,
    How to get the first 4 chars form a var ?
    i.e  temp type num20 value '00000000000012345678'.
    how to move the first 4 chars to another var?
    thx in advance.

    hi
    use OFFESTS..
    example:
    var1 = '12345678'.
    var2 = var1+0(4).
    now var2 conatins '1234'.
    thx
    pavan

  • How to get the first month of the year inputed by user manually

    Hi Expert,
    Just like the subject, I 'd like to get the first month of the year inputed by user manually, but don't know how to set the variable, please help.
    For example, user execute a query and input the value of variable Year = 2010, and what I want to get is 201001 into another variable, so that I can use this variable to setup another selection.
    Thank you.
    Andy

    Hi Andy,
    1) U will create a user input varaible for year and say it is ZYEAR.
    2)  U will create another variable  for calmonth  which has processing type : customer exit ..single value ...mandatory ....say ZCMONTH.
    This needs to be populated using the year( user inputted )  and calmonth '001'
    This code will fetch the user input value into ZYEAR and append '001' to the user input value and the value
    will be passed to the ZCMONTH varaible...
    Sample Code is....
    When 'ZCMONTH'.
    IF I_STEP = 2.
         READ TABLE I_T_VAR_RANGE WITH KEY VNAM = 'ZYEAR'.
         IF SY_SUBRC = 0.
                    L_S_RANGE-LOW  =  I_T_VAR_RANGE-LOW.
                   L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-SIGN = 'I'.
                 L_S_RANGE-OPT  = 'EQ'.
                      APPEND L_S_RANGE TO E_T_RANGE.
        ENDIF.
    ENDIF.
    Regards
    vamsi

  • How to get the first day of current month

    hi guys,
    i am trying to get the first day of current month which get from the date i input at the selection screen. my method is not so good, so i was wondering if there is better way to get the this,
    thanks.

    Try this .
    data : DAYNR LIKE  HRVSCHED-DAYNR,
         DAYTXT LIKE  HRVSCHED-DAYTXT.
    data langu like sy-langu value 'EN'.
    Parameters PDATE LIKE SY-DATUM.
    PDATE+6(02) = '01'.
    CALL FUNCTION 'RH_GET_DATE_DAYNAME'
      EXPORTING
        LANGU                     = LANGU
        DATE                      = PDATE
      CALID                     =
    IMPORTING
       DAYNR                     = DAYNR
       DAYTXT                    = DAYTXT
      DAYFREE                   =
    EXCEPTIONS
      NO_LANGU                  = 1
      NO_DATE                   = 2
      NO_DAYTXT_FOR_LANGU       = 3
      INVALID_DATE              = 4
      OTHERS                    = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    WRITE :/ PDATE, DAYNR, DAYTXT.
    Cheers

  • How to get the First day in a Week in a Fiscal Year

    Hi guys,
    I have a Requirement to calculate the First day in  a Week  in a Fiscal year .
    The FM GET*FIRST_DATE and all are for Calender year.
    Is there any FM to calculate the First in a Week in a Fiscal year.
    For eg. They will give 200826.
    In this 26 is the Week.
    I need to find the First date value in that Week.
    Thanks,
    Gokul

    Hi Gokul...
    Instead of using the funtion module you can just write the 3 statements of code to get the first day of the week.
    Its similar to the above one but instead of writing case statement you can achive the following.
    data : w_res type i,
             w_data type d,
    w_res = w_date mod 7.
    w_date = w_date - w_res.
    write w_date.
    This works.
    Regards,
    Siddarth

  • I downloaded a song yesterday and when i go to play it i only get the first four or five seconds, then it quits. When I check for available downloads, Apple says all songs have been downloaded to this computer.This last purchase didn't download.

    I downloaded a song yesterday, April 6th. It didn't download successfully, but Apple or i-tunes said it has been downloadd to my computer. Well it hasn't. I only get the first 4 or 5 seconds when i try to play it.  i don't want to pay for it again.  What should I do?

    Launch iTunes on your computer.
    From the menu bar click iTunes > Preferences then select the Advanced tab.
    Click Reset warnings and Reset cache
    Click OK.
    Restart your computer, launch iTunes.
    Click Store > Check for Available Downloads...

Maybe you are looking for