Getting my friend's name off of MY project

I was working on a project on a friend's Mac, then I saved it to a flash drive and brought it home. Now when I see it in my Recent Projects window, it has her name under it. Even if I open it and Save As to my Mac, the new copy still has her name. How to I make it so MY name is on it?

TelaMoon wrote:
if someone sent me mail, the email itself is address to me but in mail, its says my friends name and email address where mine should be.
Is it possible that you were "blind copied" on that message that was also sent to your friend?

Similar Messages

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

I have my friends iphone 3gs how do i take his name off the phone

My friend got a new iphone and sold me his 3gs iphone How do I get his name off the phone and add my name?? thank You

Go to settings -----> General ----> about ----> see the name on top---> tap and change.

HT201412 cannot get my friends icloud off my phone, cant log in as lost passwords etc. help?

cannot get my friends icloud of my phone as he has lost all his passwords etc? how can i remove it?

You can't, not without the correct ID and password. If your friend doesn't know the ID, you he/she try to find it as explained here: http://support.apple.com/kb/HT5625. If he/she doesn't know his/her password he/she can reset the password as explained here: http://support.apple.com/kb/PH2617.

HT1212 need to get the "iPad is disabled" off my iPad so I can use it

need to get the "iPad is disabled" off my iPad so I can use it

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Where can i get the report server name in Reports 10g

Where can i get my report server name in 10G ?

Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END

Getting Bad Applet class name exception while opening applet.

Hi,
While opening an applet in my mac os x v10.6.8 machine i am getting "Bad Applet class name exception" which is working fine in mac os x v10.7.5.Java version in my mac is 1.6.0_43.Can anyone please help me to resolve this.

Apple barred Java from running on Macs in order to safeguard users by blocking Java 7 Update 11 and adding it to the banned list in XProtect.
This was the second time in two weeks that Apple had blocked Oracle's code from running on Macs. The threat was so serious that the U.S. Department of Homeland Security had recommended that all Java 7 users disable or uninstall the software until a patch was issued. This time Java is blocked through Apple's XProtect anti-malware feature.
Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
In order to block older versions of Flash, Apple has updated its "Xprotect.plist" file so that any versions that come before the current one (version 11.6.602.171) cannot be used on a Mac. Users who have older versions of Flash installed will be greeted with an alert that says "Blocked plug-in," and Safari will prompt the user to update to a newer version.
Macs running OS X Snow Leopard and beyond are affected.
UPDATE for those running Lion or Mountain Lion:
Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
Update for Snow Leopard users:
Apple issued update 12 for Java for OS 10.6:
http://support.apple.com/kb/DL1573
Note: On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate.
If, after installing Java for OS X 2013-002 and the latest version of Java 7 from Oracle, you want to disable Java 7 and re-enable the Apple-provided Java SE 6 web plug-in and Web Start functionality, follow these steps:
http://support.apple.com/kb/HT5559?viewlocale=en_US
Further update:
Apple issued this Java related security update No. 13 on February 19:
http://support.apple.com/kb/HT5666
and Update No. 14 on March 4: http://support.apple.com/kb/DL1573
http://support.apple.com/kb/HT5677
You should also read this:
https://support.apple.com/kb/HT5672
The standard recommendation is for users to turn off Java except when they have to use it on known and trusted websites (like their bank). Javascript, which is unrelated despite the name, can be left on.
Further useful comment in this article:
http://www.macworld.co.uk/macsoftware/news/?newsid=3435007&olo=email

I'm getting my friend's notifications from Facebook in my notifications bar.

I'm getting my friend's notifications from Facebook in my notifications bar. I've tried disableling the app in the notifications panel, but no luck! HELP?! I'm getting a banner each time she gets a PM on Facebook.

Hi Go to settings Facetime Turn off Cellular Data. But you would be better each having your own Apple ID Cheers Brian

HT201263 i cant restore my phone, I keep getting a message to turn off find my iphone, cant get into it b/c my daughter change the password and doesn't remember the password

help, i need to restore my phone, I keep getting an error to turn off find my iphone, I can't get into the phone b/c my daughter change the password and doesn't remember what she changed it to.

Remove an iOS device or Mac on which you can’t turn off Find My iPhone
If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
Note:   If you have an iOS device, you can also remove your device by first erasing it—just follow the instructions below to remove a device you don’t have. You can later restore the device from an iCloud or iTunes backup.
                           Turn off the device.
                           Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud).                                                      If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
                           Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete (x) button next to the device.                                                      If the device comes online again, it will reappear in Find My iPhone. To make sure your device doesn’t reappear, turn off Find My iPhone on the device (follow the instructions above to remove an iOS device or Mac), or if you have an iOS device, you can erase it, then remove it (follow the instructions below to remove an iOS device you no longer have).

How come I get 3G when I turn off my LTE?

How come I get 3G when I turn off my LTE but when my friends turn their LTE off they get 4G? I have Verizon as my phone's carrier.

Because you have a Verizon iPhone and when you turn off LTE it falls back to their EVDO network and correctly shows 3G. Your friends either have a T-Mobile or AT&T iPhone and they refer to HSPA+ as "4G".
A Sprint iPhone will behave exactly like yours.

How to get a parameter without name in JSP?

hi everyone, My question is how to get a parameter without name in JSP? I have two pages, 1.html and 2.jsp.
in 1.html, I embeds some Javascript codes in HTML contents like below ( changed < to ( , > to )):
function toSubWin( obj )
window.open('test.jsp?'+obj.firstChild.toString(),'sw');
(a onClick='toSubWin(this)'style="background:green")focus(/a)
How can I get the parameter in 2.jsp?
THANK YOU IN ADVANCE!!

Does obj.firstChild.toString() evaluate to a "name=value" type of String ?
Or better what does obj.firstChild.toString(),'sw' evaluate to ? It has to end up in a name=value format, else its just gibberish appended to the url.
In the jsp, you have to obviously know the name to get the parameter. There's a getParameterNames() method which returns you a Collection of parameter names as Strings, you could probably use that to retrieve the param values.
Then there's a getParameterMap() method which returns an immutable Map containing parameter names as keys and parameter values as map values. The keys in the parameter map are of type String. The values in the parameter map are of type String array.
However to what ends you employ them in a program which doesnt know its inputs is a different story.
cheers,
ram.

How do you use WLST to get a deployed Apps name?

I am writing an application update script to make updating our environments quicker/easier with the following code from an ant build file:
<wlst debug="true" failOnError="true">
<script>
connect('login','pwd','t3://...')
updateApplication('${app.name}',block='true')
</script>
</wlst>
However, b/c our application has a version in the manifest file, our application name looks like this:
AppName-BuildNumber-TimeOfBuild
Since the TimeOfBuild is always different from build to build it is impossible to hard code this value. Is there a way to get the application's name using WLST?
connect(...)
cd('AppDeployments')
This shows me all applications deployed on the server, but inorder to go any farther I need the name of a specific app. I'm sure I am just overlooking an mbean somewhere, but I can't seem to find it! Any ideas??
Thanks.
Message was edited by:
bftanner

Ok, so I figured out how to get an applications name but I can't get the following script to work from an ant build file:
<wlst debug="true" failonerror="false">
<script>
connect('system','weblogic','t3://...')
apps=cmo.getAppDeployments()
for app in apps:
if app.getName().startswith("4X"):
stopApplication(app,block='true')
undeploy(app.getName(),targets='MS1,MS2',block='true')
deploy('4X','//box/domains/applications/4X.ear',targets='MS1,MS2',stageMode='stage',block='true')
apps=cmo.getAppDeployments()
for app in apps:
if app.getName().startswith("4X"):
startApplication(app.getName(),block='true')
</script>
</wlst>
When this is run I get the following error:
BUILD FAILED
C:\docume~1\dtanner\desktop\RELupdate.xml:134: Error executing the script snippe
t
connect('system','weblogic','t3://192.168.0.250:
7001')
apps=cmo.getAppDeployments()
for app in apps:
if app.getName().startswith("reporting-r
eport"):
stopApplication(app,block='true'
undeploy(app,targets='MS1,MS2',b
lock='true')
deploy('reporting-report-server','//bfediapp3/do
mains/applications/reporting-report-server.war',targets='MS1,MS2',stageMode='sta
ge',block='true')
apps=cmo.getAppDeployments()
for app in apps:
if app.getName().startswith("reporting-r
eport"):
startApplication(app,block='true
due to:
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('invalid syntax', ('<string>', 2, 33, '\t\t\t\tapps=cmo.getAppDepl
oyments()'))
Any Ideas??? Also, how can you keep the format i.e. tabs and spaces at the front of a line in these forums???
Thanks.

How do I get the old Apple ID off of my iPhone and the new one installed?

I got a MacBook Pro and decided to create a new Apple ID different from the one I previously had. How do I get the old Apple ID off my iPhone and the new one installed?

When I tried this, my music stayed the same whereas my new iTunes has only about half the music it used to. How can I get all the music to clear out so that it can sync my new music to it. Simply connecting it to the MacBook Pro and pressing Sync has not worked.

How do I get my 4S to turn off? The on/off button seems to be frozen. Help?

How do I get my 4S to turn off? The on/off button seems to be frozen in the down position.

Make a Genius Bar appointment. In the meantime go Settings > General > Accessabilty > Assistive Touch.
There's a lock screen option for aid when hardware fails.

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Try here > http://support.apple.com/kb/TS1538

Getting my friend's name off of MY project

Similar Messages

Maybe you are looking for