Getting new column while executing the query
Hi Experts,
i have query Dispatches on 0sd_c03, in query designer Grade(char) has draged into columns and it has only one key figure Quantity, whenever i am trying to exucte this report i am getting one more column that is named NOT ASSIGNED, this column getting figures from the before column.
what is the problem, how can solve,
pl help to do this.
thanks in advance,
venkat
Hi,
You are getting this value NOT ASSIGNED because the field does not have any value. it does not indicate any error but it says, the value has NULL VALUE.. first of all, try to find out if the null value is correct.
If so, in the selection, you can exclude NOT ASSIGNED values. which will give you required value.
Hope this helps you.
Best Regards,
SHAKEEL
Similar Messages
-
GETTING NOT ASSIGNED WHILE EXECUTING THE QUERY
Hi Experts,
i have one query on 0sd_c03, while i am executing this query i am getting 'notassingned' in some keyfigures like "width,length,grade,grade series,quality". but i have the data in datatarget.
what is the problem,what is the solution for this.
pl help me,
thanks & regards
venkathi,
is the report is on cube/ over multiprovider. if the report is multiprovider then chk all the fields in the identifcation is properly assigned to the infoproviders(cubes).
if u have more than one cube then this issue might happen.
any way, chk for the codntions/filters/restrcition for key figures at the report level.
Ramesh -
Dump while executing the query on MProvider on Stock and Billing
Hi,
I am getting this dump while executing a Query on Multiprovider. Here Multiprovider is on Billing cube(z-cube) and 0IC_C03 cubes. In the report , I have KF of both cubes. I am sure I never faced this type of problem in version 3.5. It seems we are going back day by day because of version 7.0.
A:
1) I am not getting any error if I take Kfs of only Billing cube in the
report on the multiprovider.
2) But I am getting this problem by taking only KF from 0IC_c03 on this multiprovider .
3) And also this problem is not raising in any queries(ofcourse same type) of those 2 cubes.
4) Here Fiscal Variant is constant filter, and User will enter the Fiscal year.
5) In the Columns area ,I have taken 12 selections each one restricted with one CALMONTH2.
6) in Rows part I have 3 selections. Here 2 selections have Billing KF and other selection has Blockd Stock qty KF.
B:
The above dump is not raising if I take 12 selections on columns with a restriction on 0CALMONTH with Customer exit varible , but different offsets in selections. Here the Customer exit variable gets April of the User entered Financial year as the value. But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system. Surprisingly issue is , Sales figures are comming proper.
I am on Version 7 and patch 13. And I am using Querydesigner 3.5.
Dump message: GETWA_NOT_ASSIGNED
<i>Short text:
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "RSDRC_NCUM_ROUTINES" had to be terminated because it has come across a statement that unfortunately cannot be executed.
keywords:
"GETWA_NOT_ASSIGNED" " "
"RSDRC_NCUM_ROUTINES" or "RSDRC_NCUM_ROUTINES"
"FILTER_SELDR"</i>
Thanks and Regards,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar SharmaOK,
I come back to my question: you said "<i>But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system</i>"
Can you say to which period this value correspond?
This looks like you are missing some characteristic identification in your multi.
Can you assess that?
Do you have the same time periods in both cubes? I mean, do you have at least the periods used in your RKF / query in both cubes? Would you mind pasting your identification for time IObjs from table RSDICMULTIIOBJ?
please see hereunder my identification for a sales and stock multicube
INFOCUBE OBJVERS IOBJNM PARTCUBE PARTIOBJ
ZMC021 A 0CALDAY ZICRT_C07 0CALDAY
ZMC021 A 0CALMONTH ZICRT_020 0CALMONTH
ZMC021 A 0CALMONTH ZICRT_C07 0CALMONTH
ZMC021 A 0CALMONTH2 ZICRT_020 0CALMONTH2
ZMC021 A 0CALMONTH2 ZICRT_C07 0CALMONTH2
ZMC021 A 0CALQUART1 ZICRT_020 0CALQUART1
ZMC021 A 0CALQUART1 ZICRT_C07 0CALQUART1
ZMC021 A 0CALQUARTER ZICRT_020 0CALQUARTER
ZMC021 A 0CALQUARTER ZICRT_C07 0CALQUARTER
ZMC021 A 0CALWEEK ZICRT_C07 0CALWEEK
ZMC021 A 0CALYEAR ZICRT_020 0CALYEAR
ZMC021 A 0CALYEAR ZICRT_C07 0CALYEAR
ZMC021 A 0FISCPER ZICRT_020 0FISCPER
ZMC021 A 0FISCPER ZICRT_C07 0FISCPER
ZMC021 A 0FISCPER3 ZICRT_020 0FISCPER3
ZMC021 A 0FISCVARNT ZICRT_020 0FISCVARNT
ZMC021 A 0FISCVARNT ZICRT_C07 0FISCVARNT
ZMC021 A 0FISCYEAR ZICRT_020 0FISCYEAR
ZMC021 A 0FISCYEAR ZICRT_C07 0FISCYEAR
note that here ZICRT_020 is a monthly stock cube.
hope that helps...
Olivier. -
While executing the query the output is completey different from the query
Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
SathyaHI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
While executing the query in the web template I am facing below issue
Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
AlokHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
Issue While executing the Query for Pagination using ROWNUM with like
Issue While executing the Query for Pagination using ROWNUM with like.
Database is Oracle11G.
Oracle Database Table contains 8-9 lakh records
1) SQL equal (=)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920'
Execution Time:- 0.00869245 seconds
Returns 2 resultsets
2) SQL like (one %)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920%'
Execution Time:- 0.01094301 seconds
Returns 2 resultsets
3) SQL like (two%)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE like '%KMF22600920%'
Execution Time:- 6.43989658 seconds
Returns 2 resultsets
In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
4) SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
Execution Time:- Infinite
ResultSets:- No as execution time is infinite
a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
Could you please let us know what is the issue with two % used in like and rownum
5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
Execution Time:- 7.41368914 seconds
Returns 2 resultsets
Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.
-
While executing the query getting an error u2018Page Not Foundu2019 in the bowser.
Hello,
I opened a Bex Query in Query Analyzer and clicked on the Execute button to execute the query in our portal site. But I am getting an error u2018Page Not Foundu2019 in the bowser.
As I am new to BI,Kindly guide me through the steps.
what all setting needs to be done?
Regards,
RachelHi,
The Path is C:\WINDOWS\system32\drivers\etc\hosts
You need to update "host file" in your server/in your PC. So ask Network people to do it and also you need to change your browser LANsettings.
Eg: 11.11.8.161 BWQ1 BWQ1.***.com
Like above you need to change in your host file.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 27, 2008 8:12 AM -
Getting Brain Error while saving the query--Need Immediate solution
Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
SonyHI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony -
Receiving SQL Error: INTERNAL_ERROR while executing the query
Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi YOSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers. -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy -
Dump while executing the Query
Hi,
when I try to execute the query I get the following dump.
ASSIGN_TYPE_CONFLICT
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Pleaes assist , its urgent
Regards,
ANitaHi,
The problem is Solved.
If the problem is occuring while running the query, regenerate the query through transaction RSRT.
Regards,
ANita -
Displaying new column while selecting the rows
Hi,
I am a new member of this forum and also beginner to database. Please let me know ,how to write a query for the below question.
There is a table with following details.
Name Total marks
AAA 300
BBB 200
CCC 500
DDD 150
EEE 600
I want this detail to be arranged in descending order of total marks.And a new column should show the order of the result set, ranked from highest to lowest, in the order of Total marks.
i.e.,
Output should looklike as follows,
Name Total marks Rank
EEE 600 1
CCC 500 2
AAA 300 3
BBB 200 4
DDD 150 5
Query:
Select name,total marks from studenttable orderby 2.
I want to know ,what to include with this query to get the rank column.Krystian, the order by along with rownum at the same level will not always work.
SQL> select rownum, name from studenttable ;
ROWNUM NAME
1 AAA
2 BBB
3 CCC
4 DDD
5 EEE
5 rows selected.
SQL> select rownum, name from studenttable order by marks ;
ROWNUM NAME
4 DDD
2 BBB
1 AAA
3 CCC
5 EEE
5 rows selected.
SQL>Just do a select on the ordered resultset:
SQL> select t.*, rownum rank from (select name, marks from studenttable order by 2) t ;
NAME MARKS RANK
DDD 150 1
BBB 200 2
AAA 300 3
CCC 500 4
EEE 600 5
5 rows selected.
SQL> -
Changing the default port while executing the query
Hi gurus,
Please help me with this problem. When I open a query in BEx Analyzer 3.x, I get this option to launch the query in web browser, now, when I click on this option, there is a new IE explorer that opens up and the address bar shows up the following address.
http://<My Host name>:8100/sap/bw/bex?<The query>
Now, I want to change this port to 8000 by default, what are the settings that I have to change. I tried searching it everywhere, but to no avail, Any help would greatly be appreciated.
Regards,
Sree.I got the answer on my own for this quetion guys,
The function module RSBB_URL_PREFIX_GET is used to generate the URL in BW. That is, when you click "Launch in Web Browser" in the BEx Anaylzer, "Display Query on the Web" in the BEx Query Designer or "Execute in the browser" in the Web Application Designer, the function module is called and this returns the protocol, host, domain, port and service.
The function module essentially runs through three steps:
Determine the settings on the application server and generate the URL for the application server.
Determine the settings relating to the message server, provided that it is used, and replace the host and port of the application server URL with the values for the message server.
Check whether an exception is defined for the URL generated in the previous two steps, and, if required, replace the host and port with the values from the exception.
First, the application server settings are created. If a message server is used, the settings relating to host and port are replaced with the message server settings. If an exception is maintained, the host and port are replaced in turn by the exception.
Hence a simple conclusion to this problem is that you need to maintain an exception or an entry in the table HTTPURLLOC, this can be done via SE11. the following fields appear and use the entry as shown below...
Client <default client>
Sort/Search/Match Sequence (First Match Wins) <Can be Numerical numbers 1 2 3 etc, depending on the priority>
Protocol for URL (TRANSLATE TO UPPER CASE) <http, https etc (Whatever you want to be used in the url)>
Application Key (BSP=/BSP/Namespace/Name) (*=wildcard&UPPER) <I don't know what does this mean and so used *>
Target Domain, (* = Wildcard & UPPER CASE) <Used * here again.>
Host Name with Domain <The hostname u want to appear in the address field>
Port Number <The port number>
Maybe you are looking for
-
I have been trying to start using Itunes again, I have a large amount of music on external hard drives and not a large amount of disc space, on my windows version Itunes could use it's library in the hard drive so Itunes would use a directory path to
-
My mom bought an iPhone 3G a couple of years ago. Eventually she decided that the monthly bill for it was too expensive, so she discontinued the service. It no longer has a SIM Card. She now uses it as an iPod Touch. It was running iOS 3.1, so today
-
Yesterday, 4 gig of "other" was added to my iphone 4s. What is it and how do i get rid of it please ?
-
HT1688 my phone wont charge and it keeps restarting itself.. why?
my phone does not chrage and it keeps restarting itself. what is the reason behind that?
-
Internet Explorer ii (64 bit) error message
I just installed IE 11 (64bit) and keep getting a popup error message: "Object doesn't support property or method ieGetNavigationHistory" It pops up constantly while I have IE open. I'm running Windows 7 (64bit) and this didn't happen with IE 9 (64b