GETTING NOT ASSIGNED WHILE EXECUTING THE QUERY

Hi Experts,
i have one query on 0sd_c03, while i am executing this query i am getting 'notassingned' in some keyfigures like "width,length,grade,grade series,quality". but i have the data in datatarget.
what is the problem,what is the solution for this.
pl help me,
thanks & regards
venkat

hi,
is the report is on cube/ over multiprovider. if the report is multiprovider then chk all the fields in the identifcation is properly assigned to the infoproviders(cubes).
if u have more than one cube then this issue might happen.
any way, chk for the codntions/filters/restrcition for key figures at the report level.
Ramesh

Similar Messages

Getting new column while executing the query

Hi Experts,
i have query Dispatches on 0sd_c03, in query designer Grade(char) has draged into columns and it has only one key figure Quantity, whenever i am trying to exucte this report i am getting one more column that is named NOT ASSIGNED, this column getting figures from the before column.
what is the problem, how can solve,
pl help to do this.
thanks in advance,
venkat

Hi,
You are getting this value NOT ASSIGNED because the field does not have any value. it does not indicate any error but it says, the value has NULL VALUE.. first of all, try to find out if the null value is correct.
If so, in the selection, you can exclude NOT ASSIGNED values. which will give you required value.
Hope this helps you.
Best Regards,
SHAKEEL

Dump while executing the query on MProvider on Stock and Billing

Hi,
I am getting this dump while executing a Query on Multiprovider. Here Multiprovider is on Billing cube(z-cube) and 0IC_C03 cubes. In the report , I have KF of both cubes. I am sure I never faced this type of problem in version 3.5. It seems we are going back day by day because of version 7.0.
A:
1) I am not getting any error if I take Kfs of only Billing cube in the
report on the multiprovider.
2) But I am getting this problem by taking only KF from 0IC_c03 on this multiprovider .
3) And also this problem is not raising in any queries(ofcourse same type) of those 2 cubes.
4) Here Fiscal Variant is constant filter, and User will enter the Fiscal year.
5) In the Columns area ,I have taken 12 selections each one restricted with one CALMONTH2.
6) in Rows part I have 3 selections. Here 2 selections have Billing KF and other selection has Blockd Stock qty KF.
B:
The above dump is not raising if I take 12 selections on columns with a restriction on 0CALMONTH with Customer exit varible , but different offsets in selections. Here the Customer exit variable gets April of the User entered Financial year as the value. But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system. Surprisingly issue is , Sales figures are comming proper.
I am on Version 7 and patch 13. And I am using Querydesigner 3.5.
Dump message: GETWA_NOT_ASSIGNED
<i>Short text:
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RSDRC_NCUM_ROUTINES" had to be terminated because it has come across a statement that unfortunately cannot be executed.
keywords:
"GETWA_NOT_ASSIGNED" " "
"RSDRC_NCUM_ROUTINES" or "RSDRC_NCUM_ROUTINES"
"FILTER_SELDR"</i>
Thanks and Regards,
Anil Kumar Sharma .P
Message was edited by:
        Anil Kumar Sharma
Message was edited by:
        Anil Kumar Sharma

OK,
I come back to my question: you said "<i>But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system</i>"
Can you say to which period this value correspond?
This looks like you are missing some characteristic identification in your multi.
Can you assess that?
Do you have the same time periods in both cubes? I mean, do you have at least the periods used in your RKF / query in both cubes? Would you mind pasting your identification for time IObjs from table RSDICMULTIIOBJ?
please see hereunder my identification for a sales and stock multicube
INFOCUBE                       OBJVERS IOBJNM                         PARTCUBE                       PARTIOBJ
ZMC021                         A       0CALDAY                        ZICRT_C07                      0CALDAY
ZMC021                         A       0CALMONTH                      ZICRT_020                      0CALMONTH
ZMC021                         A       0CALMONTH                      ZICRT_C07                      0CALMONTH
ZMC021                         A       0CALMONTH2                     ZICRT_020                      0CALMONTH2
ZMC021                         A       0CALMONTH2                     ZICRT_C07                      0CALMONTH2
ZMC021                         A       0CALQUART1                     ZICRT_020                      0CALQUART1
ZMC021                         A       0CALQUART1                     ZICRT_C07                      0CALQUART1
ZMC021                         A       0CALQUARTER                    ZICRT_020                      0CALQUARTER
ZMC021                         A       0CALQUARTER                    ZICRT_C07                      0CALQUARTER
ZMC021                         A       0CALWEEK                       ZICRT_C07                      0CALWEEK
ZMC021                         A       0CALYEAR                       ZICRT_020                      0CALYEAR
ZMC021                         A       0CALYEAR                       ZICRT_C07                      0CALYEAR
ZMC021                         A       0FISCPER                       ZICRT_020                      0FISCPER
ZMC021                         A       0FISCPER                       ZICRT_C07                      0FISCPER
ZMC021                         A       0FISCPER3                      ZICRT_020                      0FISCPER3
ZMC021                         A       0FISCVARNT                     ZICRT_020                      0FISCVARNT
ZMC021                         A       0FISCVARNT                     ZICRT_C07                      0FISCVARNT
ZMC021                         A       0FISCYEAR                      ZICRT_020                      0FISCYEAR
ZMC021                         A       0FISCYEAR                      ZICRT_C07                      0FISCYEAR
note that here ZICRT_020 is a monthly stock cube.
hope that helps...
Olivier.

Serious system error while executing the query: java.lang.OutOfMemoryError

From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?

In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
     <ns0:field1>1</ns0:field1>
          <ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
     <ns0:field1>2</ns0:field1>
          <ns0:field10>test2</ns0:field10>
</ns0:createTemp>
     </ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space

While executing the query the output is completey different from the query

Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
Sathya

HI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul

While executing the query in the web template I am facing below issue

Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
Alok

Hi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP

Getting a dump while executing the standard report BUSCHDOC

Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
Ravindra

Hi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu.

Issue While executing the Query for Pagination using ROWNUM with like

Issue While executing the Query for Pagination using ROWNUM with like.
Database is Oracle11G.
Oracle Database Table contains 8-9 lakh records
1) SQL equal (=)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920'
Execution Time:- 0.00869245 seconds
Returns 2 resultsets
2) SQL like (one %)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920%'
Execution Time:- 0.01094301 seconds
Returns 2 resultsets
3) SQL like (two%)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE like '%KMF22600920%'
Execution Time:- 6.43989658 seconds
Returns 2 resultsets
In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
4) SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
Execution Time:- Infinite
ResultSets:- No as execution time is infinite
a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
Could you please let us know what is the issue with two % used in like and rownum
5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
Execution Time:- 7.41368914 seconds
Returns 2 resultsets
Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?

This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.

While executing the query getting an error u2018Page Not Foundu2019 in the bowser.

Hello,
I opened a Bex Query in Query Analyzer and clicked on the Execute button to execute the query in our portal site. But I am getting an error u2018Page Not Foundu2019 in the bowser.
As I am new to BI,Kindly guide me through the steps.
what all setting needs to be done?
Regards,
Rachel

Hi,
The Path is C:\WINDOWS\system32\drivers\etc\hosts
You need to update "host file" in your server/in your PC. So ask Network people to do it and also you need to change your browser LANsettings.
Eg: 11.11.8.161 BWQ1 BWQ1.***.com
Like above you need to change in your host file.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 27, 2008 8:12 AM

While executing the query sales org not given in Selection screen but still

Hi ,
while am executing a query even though am not giving any sales organization input in selection sceen , and execute , the query will run and pop up windows displays as ' you do not Authorization to read Zsales organization,
same query i executed last days before , it worked fine, but now its not working, plz advice

Hi,
you might made Sales org Info object as Auth relevant, hence it is giving that error.
Eirther disable the authorization relevant check in the infoobject maintainance in Bex explorer tab...
Or create a auth variable for the infoobject and use it in the query..
Regards,
Rangz

Dump while executing the Query

Hi,
when I try to execute the query I get the following dump.
ASSIGN_TYPE_CONFLICT
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Pleaes assist , its urgent
Regards,
ANita

Hi,
The problem is Solved.
If the problem is occuring while running the query, regenerate the query through transaction RSRT.
Regards,
ANita

I am getting a error while executing the Web Dynpro Application Page.

Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
    The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CLIENT_APPLICATION=====CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
    Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika

>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

Error while executing the query

Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit Khanna

Hi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy

Problem while executing the query

Hi,
I have a query when iam trying to execute the query it is giving following error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Select a valid Date (OR) Fiscal Period (OR) Calendar Month
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Select a valid Date (OR) Fiscal Period (OR) Calendar Month
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1452)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:267)
Iam not sure why i could not able to execute this query.I could able to execute and run other queries.
Please help me..
thanks in advance

Hi,
Please check if you have used any formulae or function modules to derive the fiscal period/month from calday. Maybe the date being assigned is not of the same format as expected due to which the error (input valid date or calmonth or fiscal period) is being generated.
Regards,
Manoj

0ADHOC error while executing the query from Report Designer

Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVR

Hi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine

GETTING NOT ASSIGNED WHILE EXECUTING THE QUERY

Similar Messages

Maybe you are looking for