Getting not responding often doesnt last long but bugs me

im on a cam site when i go to type in the chat sometimes i cant because it say not responding.deen doing it frequently doesnt last long but has been doing it a lot today. does same thing on facebook not responding

To rule out Flash as a potential culprit, could you try one or both of the following:
(1) Disable the Protected Mode feature of the Flash Player plugin.
The following pages provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
(2) Set Flash to Click-to-Play ("Ask to Activate").
This will delay Flash from starting on a page until you approve it, which will help distinguish Flash-generated issues from page load and layout issues.
To set "Ask to Activate", open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
''Any improvement in these scenarios?''

Similar Messages

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

Please read, and reply here with more information https://forums.adobe.com/thread/1499014

XA resource [weblogic.jdbc.jts.Connection] has not responded in the last 120 second(s).

I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>

Andrew Ng wrote:
I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?Increasing thread count isn't going to help. The local server is just waiting for the
remote system to respond.
>
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>

Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes. I've gone back to Explorer!

Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes.

MAil often doesn’t fully quit although it appears closed in dock (I have to force quit)
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How can I go back to Firefox 5, the 6 update is terrible, constantly get 'not responding' when navigating.

I want to know if I can go back to Firefox vs 5 until vs 7 comes out? I am constantly getting 'not responding' from the browser when navigating through tabs and sites. (ie. if on say facebook, after maybe writing a comment or viewing a picture, I'll click on a second picture or other comment and I have to wait for the browser to 'respond'. This happens on multiple sites and multiple tabs.
I thought it was my internet connection at first but after trying Chrome and explorer browsers I do not have this issue.
It is really irritating and annoying. I did not have this issue with vs 5.

Have you tried the steps at [http://www.roboform.com/support/faq/roboform-v7#faq_firefox http://www.roboform.com/support/faq/roboform-v7#faq_firefox] ?
Firefox 5 is not recommended for security reasons, but if you don't want 6.0 you can try 3.6.x: [http://www.mozilla.org/en-US/firefox/all-older.html]

Keep getting not responding everytime i change to another site

i change sites and i get not responding but if i use internet explorer this does not happen.
what is wrong with firefox? i download new version and have even uninstalled it and reinstalled.

Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
* https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
* disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
* disable hardware acceleration in the Flash plugin
* http://kb.mozillazine.org/Flash#Troubleshooting
Also see these help articles:
[[Firefox hangs or is not responding - How to fix]]
[["Firefox is already running but is not responding" error message - How to fix it]]

MacBook Pro is running slow and All applications getting not responding..

MacBook Pro is running slow and All applications getting not responding after every 30 seconds. I have tested by hardware test nothing wrong with hardware. I am worried Because I am totally stuck with my macbook pro Help me Please !!! I have tested by creating guest account and also new account as administrator. same thing happened. apps running. I opened activity monitor and watched carefully when any app stucked, In activity monitor there is in front of ap name following text appeared : (Not Responding) in red color. 129GB free memory, 4 GB RAM Core i3 MacBook Pro 13 inch.
Instant help needed..
Thanks in ADVANCE !!!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Pages is not responding, the icon comes up but the program will not open????

Pages is not responding, the icon comes up but the program will not open????

You have to give us some more information or do a search in the forum for answers on the same matter.

My iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving

my iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving, any ideas?

iOS: Unable to update or restore

When using Foxfire I keep getting "not responding", how can I fix this?

When using foxfire I keep getting "not responding" How can I correct this?

If this is happening with one or two specific sites, those site may have been hacked, or they may simply be bad sites.
If it's happening with a larger number of sites, and with sites that are legit (like Google, Yahoo, Facebook, etc), then it's likely that your wireless router has been hacked. See:
How to manage a hacked wireless router
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

I constantly get not responding hangups! No matter what I try it continues to be a problem. Help?

I am constantly getting not responding hangups when accessing my files? help?Using Windows 8

Hey,
Could you please provide me with some more details so that I can analyze the issue.
Let me know what Acrobat version are you using and specify the error message that you get.
When do you get the error? Just after launching Acrobat or while opening PDF or something else?
Hope to hear from you.
Regards,
Anubha

Hii everyone,I am using mac os 10.8.3 and its getting not responding every time.

Hii guys ,I am using ma os 10.8.3 and my finder is getting not responding all the time ,I can hardly use the finder for 2 min and it gets jammed.after a few days vlc player,then safari and its continuing .Now i even cant open the Launch pad and the applications are not even visible to me..
I tried all the possibilities like Pram set ,repairing the disks and every sort of process i know .so please help me out with it

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Keep getting "not responding" message, extremely slow, have tried rebuilding data base, tried removing and re-installing. Still the same

keep getting "not responding" message, extremely slow, have tried rebuilding data base, tried removing and re-installing. Still the same

Do you use McAfee anti-virus software?
If yes, please read:
* https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee
Is this an Imap mail account?
if yes, you can choose to only synchronize the most recent of emails instead of a whole folder.
see info :
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_configuring-synchronization-and-disk-space-usage
Make sure you compact folders on a regular basis to remove all 'marked as deleted' emails.
Tools -> Account Settings -> Server Settings -> Clean up ("Expunge") Inbox on Exit will compact the Inbox folder when you exit Thunderbird. If you check "Empty Trash on Exit" it will also empty and compact the Trash folder when you exit.

I keep getting NOT RESPONDING when browsing ebay.

When browsing Ebay.co.uk I keep getting NOT RESPONDING and I have to wait
till it sorts itself out.It takes so much time trying to get round.
== URL of affected sites ==
http://Ebay.co.uk

Hello Connie.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Keep getting "not responding" when using Yahoo's new version of email on a Win8 Lenovo computer

Firefox no longer works properly. I tried the reset Firefox option, but that did not help. When I try to delete an email, I receive the not responding message. When I try to move an email into a folder I receive the message. When I try just to go to the next email, I receive the message. If I try to mark a message not spam, nothing happens. If I wait, eventually Firefox responds and I can move on to the next email. Obviously this is very time consuming and I find that I just don't read my email as I don't what to spend the time. I contact Yahoo and they responded back that it is a browser issue. Because Firefox is the only browser I have on my computer I need to get this working properly again. One more thing, sometime this non-responsive message shows up when I am using other sites, but just not as often as when I'm trying to read my Yahoo emails.
I thank you in advance for answering my question and try to help me get this issue resolved.

To rule out Flash as a potential culprit, could you try one or both of the following:
(1) Disable the Protected Mode feature of the Flash Player plugin.
The following pages provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
(2) Set Flash to Click-to-Play ("Ask to Activate").
This will delay Flash from starting on a page until you approve it, which will help distinguish Flash-generated issues from page load and layout issues.
To set "Ask to Activate", open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
''Any improvement in these scenarios?''

Getting not responding often doesnt last long but bugs me

Similar Messages

Maybe you are looking for