Getting number range interval for document type
Hi All,
My requirement is to display number range interval for any docnument type in SD.
I will elaborate my req. clearly.
We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
Please help me in searching database table to relate Document type or NUMKI and internal number range.
Regards,
Suresh.
Relation is as below:
TVAK --> AUART = "Sales Document Type"
NRIV --> OBJECT = "RV_BELEG" and
NRRANGENR = TVAK-NUMKI
Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
Regards
Eswar
Similar Messages
-
Maintain number range interval "" for inventory document --help!
Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport. -
Number range interval for characteristic 0CSTELMNTYP is missing
All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
DaveHi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar -
Re : Maintain number range interval "" for quants
Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Antodear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp -
Po number range as per document type
Hi All,
How to configure PO number range as per document type? Like i want my service POs (doc type FO) with different number range than with document type NB.
Regards,
ShailendraDefine document types. Method
Transaction: SPRO
Menupath -> Materials Management -> Purchasing -> Purchase Order -> Define document types
Select document types:
Enter - Document type (NB) , Type description (Std PO with delivery) , Item interval (1) , NR rng as. (Number range assignment) as 01, Field selection (NB).
Save the details entered.
Then go to Define Number range (OMH6) or menu path Materials Management -> Purchasing -> Purchase Order -> Define number range
Select Interval
Define NO as 01 (Number range assignment already maintained in document types), then give from range, to range. Current number is 0
Hope you have understood and now you can link with number range with document types.
Any clarifications, please revert back.
Thanks,
Ravi -
Maintain number range interval for master data upload for existing employee
Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh -
Number Range : Plant and Document Type in PO
Dear All,
We have a requirement that PR and PO should have different number range but we cannot create new Document Type.
Is there any User Exit by which we can use same Document Type and have different Number range for different Plants. Both in PR and PO.
Please suggest.
Regards,
VikasPurchase Requisition
Function Module: EXIT_SAPMM06B_001 - Purchase Requisition
Exit Name: M06B0003
Include: ZXM06U18
Purchase Order
Function Module: EXIT_SAPMM06E_001 - Purchase Order
Exit Name: MM06E003
Include: ZXM06U17 -
Table for document type Number Range interval
Hi,
I want to know the number range interval for document type in the production system but I do not have authorisation for SPRO in the prd system.
Kindly let me know the table name to check this number range interval for the document type.
Table T003 stores only the number range and not the interval.
Thanks
SureshHi,
The table which has document types is T003 but the number ranges are stored in a Structure IRDP. The number ranges are maintained directly in the production system.
regards,
radhika
Edited by: kolipara radhika on Aug 25, 2008 6:01 AM -
Number range table for MM document types
hi
Can anybody help me to find the number range for the mm document types.
Regards
rajeevHi,
go to transaction SPRO, Materials Management, then choose one of the following:
Purchasing or
External Services Management or
Logistics Invoice Verification or
Inventory Management and Physical Inventory
and look for the document types you would like to customize.
Like within purchasing for purchase order -> Define Number Ranges. In this step, you maintain the number ranges for the following purchasing documents:
RFQ/quotation
Purchase order
Contract
Scheduling agreement
After that you can add the number ranges to the document types under Define Document Types. ...
Please be more specific next time as MM document types can relate to 4 main areas within MM.
Regards,
Edit -
Error-For object GL_LOCAL GBU1, number range interval does not exist
Hello experts
I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015. I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
Please see the attached screenshots.
Thank you.Hi Rahul
Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed. So, I just executed tcode GB02 and went straight to Interval --> transport.
Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction. -
Subject: Number Range interval deleted automatically
Hi
At the time of Accounting Document Posting system is giving error message for maintaining number ranges interval for the corresponding Number Ranges (For example: 50, 51, 49, 19) for the fiscal year 2010. But Number range interval has already been maintained in the Tcode FBN1 for the fiscal year 2010.
After maintaining Number range interval again for the corresponding number range in Tcode FBN1, when we are trying to post accounting document system is again giving one error message that document number (5000000000) is already been used. When we are looking into Tcode FBN1 the current number status is 0.
So to resolve this problem we have to provide the Number range status into FBN1 manually (suppose if 10 doc are already existing in the system for number range 50 then we have enter the number range 5000000010 manually in FBN1).
After Number range status setting in FBN1 System is allowing to post the Accounting Document.
Along with this one more issue is appearing related to MM posting period.
The current posting period in the system is 08/2010 and the initial period in the system is 08/2007. System is automatically going back to the initial posting period 08/2007. After opening the Posting Period with Tcode MMPV we can post the document only.
Both Issues are appearing repeatedly.
Plese help
Thanks..
BRSRDear If you have already maintained number range for particular period then again for same period and series system should not allow to maintain but as you said above it is allowed so i feel it was not done correctly first time and the given series number could have already been used so when changed the current number in status it's working fine.
For MM posting period issue please check transactions MMRV,OMSY,OMWD with your MM consultant
Cheers
KK
Edited by: kiran kumar on Oct 19, 2010 8:32 PM -
Change / Create number range interval
Hi All,
I have an issue with number ranges.
I am working on a global roleout and and have an issue where in DEV client my PM orders are assigned to number range 5000000 - 5999999 but from QAS to PRD this number range has been used for something else. Infact all available number ranges are taken!!!!!! Poor management I know.
How do I or can I create a new number range interval for example 20000000 - 29999999. If I can do this I can the reasigne the PM orders to this new range.
Thanks in advance
Stuarthi
what you can do is either change the internal number range ,for example if the existing no range is from 500-1000 then you can change the ending number range say from 1000 to 9999 and assign to the particular order type
or create an new number range for the order type and assign to the respective order
regards
thyagarajan -
Number range missing for characteristic 0AF_SEAN after importing request
Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shahhi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps. -
Transport Error like Number Range Inteval for 0PRODID is missing
Hello
Iam transporting an infoobject to Quality and got an error like Number range interval for 0PRODID is missing.
But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
can you pls let me know what to do.Hello prasanna
Check with your Infoobject 0PRODID in Quality has got the Number range available.
If not first generate the Number range or go with the RSRV run the test with Master and do the transport -
Item Number : Number Range Interval
How can I configure Number Range Interval for Item Numbers with leading zeroes?
Thanks.Hi Bhavesh
Use the tcode OMSL and there u can check the check box "Leading Zero"
Hope it wud have answered ur question
Reward if useful
Aasif
Maybe you are looking for
-
Is apps like iPhoto can only be assigned to one Apple ID in one device?
Hey all, I have a tricky question which confused me for quite a long time... hope you can help me resolve it. I registered my Macbook Air with my own Apple ID and downloaded some apps. Everything went fine until one day, my bf used it to downloaded s
-
Sometimes Blue screen appears on Satellite M70
Hi there I must express my overwhelming frustration with my satellite M70 laptop as I have it for more than a year now(warranty expired) and almost from the get go it had a problem in wich a blue screen appeared and the pc reboots...from the error re
-
C6-00 lack of memory and warnings
hello, i have the last firmware, and only nokia software that came with nokia mobile... My c6-00 have a lack of memory ram, its annoying and unfair that i need to restart the mobile 12 hrs to 12 hours... Cause the mobile losses the ram too fast... Th
-
Hi, We noticed a fault when we register a service in ML81, order number XXXXXX position 400. This is a a limit order and connected to a main order where no cost should appear. When it's received the order number is changed. When saving the received i
-
Directory permissions differ on var/
When upgrading packages with pacman, I've been getting a warning that "directory permissions differ on var/ filesystem 775 package 755 This most recently was during my upgrade of xorg-server I'm not sure what causes this warning, or whether some act