Getting of the word CLIP on the bottom of video clip

Is there any way to have your individual clips show up like this:
2009 09-04 20;48;40 Instead of clip-2009 09-04 20;48;40
I'm always clicking on the clip because it shows like this clip-2009-0.....4 20;47;45. If I can get rid of clip- then I can see what I need to when organizing games by date.
If the only way is one at a time, then I will have to live with it. Thanks Tracy

The title of a clip will be assigned by your camera. If you import your clips into iPhoto before importing them into iMovie, you can change the name of the clip in iPhoto as I mentioned in my previous post. From there you import into iMovie.
I am not aware of any way to change the name of a clip within the iMovie app itself.
You did post in the iMovie 6 forum, which is the correct forum if you are running iMovie 6.

Similar Messages

When I'm on microsoft word and typing and get to the bottom of the page a new page doesn't just come up, i have to manually put it there so then when i go back and add stuff to the first page i loose whatever was at the bottom. how do i stop this?

When I'm on microsoft word on my macbook air and get to the bottom a the page, a new page does not come up. i have to manually insert one. so then when i go back to edit my work and add something in what ever was at the bottom of the page disappears. how can i stop this from happening or change it so a new page opens by itself?

It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

I am trying to shut down my computer after disconnecting my modem because I haven't been able to get an email out. But when I shut it off a screen comes up saying the server doesn't recognize the 500 names. I can't get to the bottom of the screan

My computer will not shut down after trying to send an email. A screan came up saying the server doesnt recognize the emails. And I can't scroll down to the bottom of the page to see if there is something to cancel or click on. How do I get to the bottom of the page?

You may have to just force quit the app in question. Why on earth would you try and email 500 people all at once? Email servers specifically won't accept emails with that many recipients depending on email service you have.
Anyway, to force quit the app, just right-click on the app icon and choose force quit off the menu.

How do I get to the bottom of a dialogue box that isn't visible? Critical Mail problem!

I tried sending an email to a long list of recipients in a group. For some reason, I got a werid dialogue box about how it my SMTP server didn't recognize some addresses (though they all seem fine). No big deal, normally I would just edit the message and fix/delete the offending email addresses. However, the bottom of the warning dialogue is off screen and I can't scroll down. All I can do is hit "enter" and try to resend. But then I get a repeat.
The message in question is not seen in either my Outgoing, Sent, or Drafts folders. At least not when the dialogue box is open. So I can't just kill the message.
I also can't quit Mail while this message is up. I can go to the Finder and force quit. But then if I restart Mail the dialogue box pops right back up and I'm stuck where I was before.
Basically, I just need to know how to get to the bottom of the warning dialogue box so that I can click on the "edit message" button.
Help?!
Oh, I'm running the most updated version of OS X Lion.

I did that twice. Once, about an hour ago. And nothing changed. I did it again about twenty minutes ago, and still nothing. A few minutes ago I tried yet another force quit. And .... that seemed to do the trick. The offending email message is gone.
So my problem seems to be solved.
But the larger issue remains of a major bug in Mac OS, it seems. If a dialogue box is larger than the screen size, how is someone ever going to be able to deal with closing it or anything else? It would make sense to automatically allow the cursor to scroll down to the very bottom of any dialogue box, regardless of its size. After all, that's how windows work, right?
Crazy!

My MacBook Retina has been shutting off multiple times per day. It is beginning to happen more frequently. What can I do to locate the exact issue? My warranty has expired so I would like to get to the bottom of it without taking it in to an apple store.

It is beginning to shutdown with no warning more frequently. What can I do to locate the exact issue? My warranty has expired so I would like to get to the bottom of it without taking it in to an apple store.
I am currently learning how to do diagnostics on mac hardware but I am not a native mac user. It is unlikely that this is a software issue. Please, any input will be helpful.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Photoshop 12 screen has gotten too long on OS X, cannot get to the bottom to reduce, how do I make it smaller?

Photoshop 12 screen has gotten too long on OS X, cannot get to the bottom to reduce, how do I make it smaller?

Stuck Windows in Photoshop Elements on a Mac | Barbara's Sort-of-Tech Blog

"how to get to the bottom of a page fast on the iPad Air"

how to get to the bottom of a page fast on the iPad Air"

thank you! I am admiring my three dots and considering which cat's picture I should upload as my avatar.
yes, the scrolling down in sections I have managed. I thought you were saying one set of double taps would go straight to the bottom.
here's another question for you: on my iMac by holding the command key down I can make a link open in a new tab. Do you know if there is a way to do that on the iPad?

HT201317 How do I get all the photos and videos I already have on my ipad and iphone over to photo stream to bring up on my PC

CAn you please tell me how I can get all the photos and video from my iPad and iPhone that aren't in photo stream so I can get them from my iCloud onto my PC please.

If you don't physically have the phone then there is no way for you to get the photos or videos.
Have you been backing up your phone? http://support.apple.com/kb/HT1766 if so, you can restore that backup to your new phone and get all your contents back.
did you fail to import pics to your computer as you would a digital camera? http://support.apple.com/kb/HT4083

How to get to the bottom of iphone photo library more quickly?

I have about 8000 pics in here and most are in albums so I can find them reasonably easily. Some that haven't been put in an album and are located halfway down or more take FOREVER to scroll and find. Is there some way to jump further down the album like 1/4, 1/2 or some increment to reduce the scrolling?

I'll use this shameless bump to also ask if there is a way to change the sort order of pics in the Photo Library... it starts with oldest pics first and you have to scroll down over and over to get to the newer pics. My guess would be that most people tend to look at their newer pictures more frequently, but maybe that's just me. It's fine if the pics you want are in the last imported album because that's easy to find. But, once they aren't the last import anymore, they're WAY DOWN at the bottom of the album. I don't see anyway to change this sort order or make the Library default to showing newest first when selected... either within the application or Settings. Any info on if/how this would be done?

Cannot send message dialog box is too big to get to the bottom to close

I tried sending an email to my entire address book. I received the error message "cannot send message". That is not my issue, I can deal with it. What IS my issue is the dialog box contains all the addresses that I tried to send the email to and therefore the dialog box itself is really big. I cannot scroll to the bottom to click on the resend, or edit email choices. I cannot close this particular email. I forced quit email altogether, but when I re-opened the dialog and message came back up. I shut all the way down and it still came up. Does anyone know how to get rid of this unsent email?

I just went to the Genius Bar with this exact problem. To fix this do the following:
1. click on the error message (it will select it without showing anything)
2. press the return key (this should clear it from the screen and it will try to resend)
3a. turn off your internet connection (wither airport or ethernet)
3b. go to mail preferences and turn "disable" that particular mail account
(these 2 steps in #3 will stop mail from its automation and allow you to select the message itself)
4. Your "outbox should now be present, and you can go into it and select the message
5. now click on the message tab at the top of your screen and select "send to..." > select "drafts"
Now you should be able to edit this message or the recipients or just delete it all together and start over. I hope this helps some people out, it was a massive headache for me!
Message was edited by: rockfountain

I am getting a the same popup video every time I click on a link

Every time I click on a link I get the same video that pops up? Is there a setting or something to prevent this or do I have a more serious issue?

Clear Safari and restart the iPad.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or quit Safari completely and reboot the iPad. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Premiere 10 chopping off the bottom of video

Anyone know why 20% or so of the bottom of my videos gets chopped off when i upload them to youtube. nothing else changes just the bottom 20% is missing

If you are shooting 720p on that device, the best project settings are Flip Video HD 30.
That's not an exact match, but it's as close as you're likely to get, since technically that camera doesn't shoot video that's meant for editing. But you should be able to get by.
And if you use these specs to output your video and then manually upload it YouTube, you should get excellent results!
http://forums.adobe.com/thread/623549

EE Action Cam Lines at the bottom of videos

Dear EE,
This is the sample of clips which shows that the cam has a lines at the bottom of screen..
https://www.youtube.com/watch?v=uyqq5R27hjE&feature=youtu.be
Can you please let me know if there is going to be a firmware update to fix it.
thanks.

Hi,
Return it
Buy a go pro
PROFIT!

When I go to update my apps on itunes, it says my account has been disabled. I've done everything I know to do to no avail. I've changed passwords, I've done it all about a hundred times, but I can't get to the bottom of it...HELP Please :)

Hi,
I am about to pull my hair out. My itunes account has been disabled............or at least that's what it says everytime I want to update my apps....I can't do it. Then it sends me to a useless web address www.apples.com/itunes/storesupport/forassistance it never helps me. I've changed my password, etc. But I can't get my apps updated or the "Apple" in the sky to fix it...I don't know where to go for customer service....Any suggestions?
Thanks
Kathy

I updated the software on my iphone4 tonight and ran into this same endless loop - "itunes terms & conditions have been changed" - go to itunes, aceept - back to the "T&C have been changed message" with no ability to do anything in the app store until I accepted the new terms.
While not a very direct solution, I was able to finally accept the terms in a way that seem to register with apple by making a purchase through iTunes on my computer. This forced me through updating my payment information and updating my iTunes software to the latest edition (which I had not yet taken the time to do). After doing both of these, iTunes took me through the terms & conditions on two separate pages, but ultimately allowed me to purchase my song. Once I completed these steps, it fixed the problem on my phone, so now I can update my apps and download new ones without running into that loop.
Hope this helps!!!

Help with BBOD! Can't seem to get to the bottom of it. Have tried SMC reset, PRAM reset, reinstall of Mavericks, Carbon copy clone, checked my CPU, Memory is 500GB and I'm only using 250GB thereabouts.

Here's what I've tried;
SMC reset
Pram reset
Looked at activity monitor - mostly seems OK aside from a kernel task taking up memory (approx 460MB) but CPU is around 96% idle.
Fan seems to be running constantly - heats up noticeably when I close the MBP
Despite a re-install of Mavericks, MBP is running frustratingly slow. Just typing is enough to bring on the beach ball.
Have backed up everything, reinstalled from a clone, checked through Apple Hardware test and carried out a Verify Disk Permission - nothing was reported, erased the drive and set up again - problem still stands.
Memory is running at 3.43 GB without anything really running bar Safari.
A little loath to install SMC fan control without knowing what's wrong.
Checked software updates.
Can anyone tell me what the matter is? Does this have a fix?
Have been reading up various posts but to no avail so have resorted to posting myself.
Does this sound familiar to anyone?
Many, many thanks
Roque

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Getting of the word CLIP on the bottom of video clip

Similar Messages

Maybe you are looking for