Getting Omniporlet timed out when i enter wsdl url?

Can anyone give me some help with this?

Go to settings
select time and date
take it off the automatic setting
set month 1 month back
restart your ipad
go back to settings>Time and date
Change month back to current month
reselect automatic
This worked for me

Similar Messages

  • Can receive mail, but keep getting a 'timed out' when trying to send

    I use bellsouth (ATT) as my mail server - - for the last 4 days, I have been unable to send on my MacBook Pro.
    I am receiving mail with out incident and have been able to send from my iPhone - but not from my lap top. Have called Bellsouth, they referred me to advanced support.
    Any suggestions?

    Hi,
    Unless Bellsouth has recently changed something, their SMTP does not require separate Authentication -- it is actually authenticated on the basis of the having already authenticated the Incoming server. In Mail Preferences/Accounts/Account Information click on the arrows beside the name of the Outgoing Server, choose Edit Server List, and then choose the Advanced Tab. There for the Bellsouth SMTP, you should check to use the Custom port, set to Port 25, and choose None as the method of Authentication. Remove any Username and Password entered there, and Save these settings. You should now be able to send with the Bellsouth SMTP.
    So while I am sure Bellsouth would say their SMTP is Authenticated (and it is), they do not understand that Mail will take care of that on the basis of the Incoming data without the entries for separately authenticating the Outgoing Server, and will in fact cause failure if that is attempted.
    Ernie

  • VPN client get connect but Request Timed out when ping

    Hi, I'm using the cisco 837 router as my VPN server. I get  connected using Cisco VPN Client Version 5. But when I ping the router  ip, i get request timed out. Here is my configuration :
    Building configuration...
    Current configuration : 3704 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname michael
    boot-start-marker
    boot-end-marker
    memory-size iomem 5
    no logging console
    enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0
    aaa new-model
    aaa authentication login default local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authorization exec default local
    aaa authorization network sdm_vpn_group_ml_1 local
    aaa session-id common
    resource policy
    ip subnet-zero
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp pool michael
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 202.134.0.155
    ip dhcp pool excluded-address
       host 192.168.1.4 255.255.255.0
       hardware-address 01c8.d719.957a.b9
    ip cef
    ip name-server 202.134.0.155
    ip name-server 203.130.193.74
    vpdn enable
    username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f.
    username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp xauth timeout 15
    crypto isakmp client configuration group michaelvpn
    key vpnpassword
    pool SDM_POOL_1
    acl 199
    netmask 255.255.255.0
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto dynamic-map SDM_DYNMAP_1 1
    set transform-set ESP-3DES-SHA
    crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
    crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1
    crypto map SDM_CMAP_1 client configuration address respond
    crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
    interface Ethernet0
    description $FW_INSIDE$
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    hold-queue 100 out
    interface Ethernet2
    no ip address
    shutdown
    hold-queue 100 out
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    dsl operating-mode auto
    pvc 0/35
      pppoe-client dial-pool-number 1
    interface FastEthernet1
    duplex auto
    speed auto
    interface FastEthernet2
    duplex auto
    speed auto
    interface FastEthernet3
    duplex auto
    speed auto
    interface FastEthernet4
    duplex auto
    speed auto
    interface Virtual-PPP1
    no ip address
    interface Dialer1
    description $FW_OUTSIDE$
    mtu 1492
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    ppp chap hostname ispusername
    ppp chap password 0 isppassword
    ppp pap sent-username ispusername password 0 isppassword
    crypto map SDM_CMAP_1
    ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip http server
    no ip http secure-server
    ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723
    ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21
    ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
    access-list 1 remark SDM_ACL Category=16
    access-list 1 permit 192.0.0.0 0.255.255.255
    access-list 102 remark SDM_ACL Category=2
    access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    access-list 102 permit ip 192.168.1.0 0.0.0.255 any
    access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    route-map SDM_RMAP_1 permit 1
    match ip address 102
    control-plane
    banner motd ^C
    Authorized Access Only
    UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED
    You must have explicit permission to access this device.
    All activities performed on this device are logged.
    Any violations of access policy will result in disciplinary action.
    ^C
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    scheduler max-task-time 5000
    end
    Thank you, anny help will be appreciated.

    Thank you for your response, here is the debug :
    Log Buffer (4096 bytes):
      1 15:19:47.011: ISAKMP: set new node 856647599 to QM_IDLE     
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
         spi 2182802952, message ID = 856647599
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8A
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE     
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):purging node 856647599
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:49.979: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B4F274, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:49.983: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B4F274, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:58.383: ISAKMP (0:134217736): received packet from 120.168.1.24 dport 4500 sport 52667 Global (R) QM_IDLE     
    May  1 15:19:58.383: ISAKMP: set new node -1340288848 to QM_IDLE     
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1): processing HASH payload. message ID = -1340288848
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1): processing NOTIFY DPD/R_U_THERE protocol 1
         spi 0, message ID = -1340288848, sa = 81A7DCEC
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):deleting node -1340288848 error FALSE reason "Informational (in) state 1"
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:58.391: ISAKMP:(0:8:SW:1):DPD/R_U_THERE received from peer 120.168.1.24, sequence 0xA3285B8B
    May  1 15:19:58.391: ISAKMP: set new node -752454119 to QM_IDLE     
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
         spi 2182802952, message ID = -752454119
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8B
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE     
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):purging node -752454119
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81F84148, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81F84148, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    After searching thru the internet, I've found :
    CSCsb46264
    Symptoms: When a dialer interface is configured as an endpoint for a  IPSec+GRE tunnel, tracebacks with bad refcount may be generated.
    Conditions: This symptom is observed on a Cisco 837 when router-generated packets such as routing updates are being switched.
    Is that possible that the root of the problem was that ? Thank you.

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • When I try to sign in with new password for apple, I constantly get "session timed out"

    When I try to sign in with a new password for IPhone, I constantly get "session timed out" and I am asked to try again and it does the same

    sounds like your connection to the internet has failed.

  • When I open the browser I get a timed out message and it doesn't finish loading.

    When I click to open the browser It takes a long time then I get a timed out message. I was using 12 then down loaded Aurora and the problem is still there. It started out getting slower a couple weeks ago and then just quit working and now it won't work at all.

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache Clear Cookies & Cache]
    * Make sure that you are using the '''"Remember History"''' setting as described in this article -> [[Options window - Privacy panel]]
    * [[Server not found]]
    Check and tell if its working.

  • I started getting a Timed Out error message on my iPhone 5 when browsing the web that reads Page could not be loaded.  Connection timed out.  I performed a Reset Network Settings and still get the error.  What is the fix?

    I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded.  Connection timed out.  I performed a Reset Network Settings and am still getting the error message.  What is the fix?

    Thanks so much for more direction. 
    I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec.  I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7.  Today Apple released v. 11 of iTunes which I was instructed to download.  It's TOTALLY different from iTunes 10.7 - drastically different in fact. 
    The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK.  With v. 11 of iTunes I can't even find the restore option!!!  The phone Rep will have to help me navigate v. 11 of iTunes.  It doesn't seem intuitive at all.  Maybe it's just me?!?!
    Thank you for sending this new link for firmware.  It's not clear to me right now whether I'll need it or not.  The phone Rep will probably somehow be able to resolve the problem.  If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty.  I will give another update as to what transpires as a result of the phone call with the Apple Rep.
    Again, thank you so much for helping me. 

  • I keep getting network timed out errors when downloading iPad software

    How do I download ios5 without getting network timed out errors?

    Try temporarily turning off your firewall and antivirus software until the download has completed.

  • Network connection timed out when upgrading to iTunes Plus

    Seems I unknowingly fell into the same limbo as other users, after upgrading 214 songs to iTunes Plus, when trying to download them, I only get "network timed out" messages trying to download those "upgraded" songs.
    Then I did my research to find out that it's affecting a lot of people.
    It's not my network I can assure you, I flushed the DNS, I tried directly from modem to cpu (removed the router from the line) checked all my network settings and security's, checked all my system32/host files, checked my packet transmission settings, disabled firewalls, virus scanners, re-installed itunes.
    So then I went another step to install Itunes 10.1 on my work cpu (different network) and my ex-wife's cpu (different network) and all had the same issue after I authorized their cpu's for my account use.
    The 214 songs show up ready for download, but same message (networked timed out)
    Seems to me that the Apple network is probably trying to send all the songs at the same time as a single packet, which of course is going to be too huge for anybody's network. (Since I'm hearing that people requesting for their que's to be reduced to smaller numbers 30-50 songs at a time and getting success I might have to do the same)
    Is there any other thing I might be forgetting?
    I guess if I dont get this resolved soon™, my only resolution will be to call visa and dispute the charges which I'd rather not. Im hoping for a more logical resolution.

    This problem is related to having your computer, Apple device, etc
    (from your current physical location) being unable to resolve/connect to
    the following site/domain names and their related IP address(s).
    The following table is presented to help explain/clarify this issue:
    Site/Domain name | IP Address
    phobos.apple.com | 17.250.237.43
    deimos3.apple.com | 206.169.246.144
    albert.apple.com | 17.149.240.64
    gs.apple.com | 17.151.36.30
    itunes.apple.com | 206.169.246.171
    ax.itunes.apple.com | 206.169.246.139
    If ANY of these sites/IP address are unresolvable (via PING for example)
    then the ability/usability of Apple's iTunes (and the Store) will suffer.
    To have yourself verify that (if) you can connect to these sites, you'll
    need to open up a MSDOS/Command prompt window
    and then type "ping" (without the quotes) and one of the (above) listed sites.
    For example you would type the following at your command prompt:
    ping phobos.apple.com (then press the return/enter key)
    which (should) give you results like this:
    pinging phobos.apple.com.akadns.net http://17.250.237.43 with 32 bytes of data:
    Note: Anyt response other than "reply" (like Request timed out)
    indicates a problem resolving the site's name to an IP address
    and (generally) has NOTHING to do with your (normally functioning) computer
    as this is dependent on the ISP (Internet Service Provider) that you are
    using to connect to the Internet (like Sprint, Insightbb, etc) with.
    The 'key' here is that it's the ISP's responsibility to (properly) resolve
    the site's name to (one or more of) Apple's sites.
    If (however) Apple (itself) is (currently) experiencing a DDOS attack
    (Distributed Denial Of Service) upon one (or more) of it's sites, then THAT
    would explain a possible cause of the problem.
    However I stress THAT is NOT the problem since I can connect from my Insightbb
    (ISP provider) at home but (currently) can not connect at work via their ISP.
    This is (also) WHY the "tag" of the FQDNSN (Fully-Qualified DNS Name)
    is listed as http://akadns.net since that is the ISP/Router resolving the DNS name!
    I hope that this has helped shed some light as to WHo's problem this REALLY is,
    and will help to stop the Apple-User 'finger-pointing' game in it's tracks!
    Your's The Lan_Man!
    William Cull
    Technology Specialist
    University of Louisville

  • Request timed out when purchasing music. Fresh install of Win7.

    For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
    Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?

    This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
    1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
    2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
    3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
    Here are the steps:
    Make the following changes on the application server/system.
    Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
    Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
    Change the value of SendRequestTimeout(ms) to 100000.
    Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
    Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
    Retry the failing application.
    See note:  1296656
    This error should be easy to fix
    Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

  • Reg. Getting Operation timed out

    I have SQL servers configured with AlwaysOn.
    But when connecting to Databases in SQL Server 2014, I am getting operation timed out and SQL queries are also  taking unusually long time. The network connectivity is fine.
    Because of this the applications connecting are failing with timeout error.

    >>>But when connecting to Databases in SQL Server 2014,
    Are you connecting via SSMS or .NET application?
    Is not
    high CPU/Memory ?
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Connection timed out, when server is present in  far-off place

    We have a web application on JBoss-3.2.3. It makes use of Applets. To paint the applet, a request is sent to a server using a HttpURLConnection. Evertyhing works fine when the browser(client) and the server are on the same network. However, if the client(browser) is in Australia and the server in India(i.e. long distance between server and client), then the Applet crashes with a Connection timed out exception. Any solution for this?
    The code looks something like:
    URL url = new URL(urlString);
    HttpURLConnection connection = (HttpURLConnection) url.openConnection();
    connection.setDoOutput(true);
    connection.connect();

    So I am facing the weirdest network/server problem ever!I have a customer which had a Supermicro server (Was there before me!). It was never used and they didn't know the password so i decided to format and re-install Windows Server 2012 R2 on it. I promoted it to a new domain and setup Windows Essentials so I could setup RDWeb for them quickly. They were up and running great. I also installed Trend Micro on the server and pushed it out to the client PC's. A little more info about my network before i get into the gritty. I have Brighthouse cable 35Mbps as an ISP with an ARRIS modem, a Ubiquiti Edgerouter Lite as my firewall and a cisco sg200-26 as my core switch. It's not a big location. We randomly started getting request timed out at the gateway level and the firewall level from outside and internet was dropping. We worked for weeks...
    This topic first appeared in the Spiceworks Community

  • My husband forgot his apple id password but the system won't allow him to reset it - keep getting a timed out message.  Help!

    Of course, after he'd tried to reset it, I found the original password.  But that now doesn't work and we can't reset the password.  We can't even "find" the ID.  We keep getting a timed out message, no matter what we try.  Since he has no working Apple ID, I'm using mine to ask this question.  Possibly relevant - he is NOT a big app user.  I set up the account for him when he first got his iPhone a couple of years ago and he has only a few apps installed.  So the card details may have expired but, of course, he can't update them either.  He recently updated to the latest IOS (6.1.3) and it was when finishing the installation that he ran into the problems with forgetting his password.
    Short of creating a new ID, does anyone have any bright ideas?

    Call Apple Care for your country and request help resetting the password.

  • Tabular data model: Query keeps timing out when attempting to Edit Table Properties

    Tabular data model (SSDT)
    Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
    Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
    This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
    Thanks...

    Hi ManikantM,
    According to your description, you query keeps time out when edit table properties. Right?
    In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
    We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
    http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
    Please also refer to a similar thread below:
    https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
    Best Regards,
    Simon Hou
    TechNet Community Support

  • My cc cloud app signs me out when I enter my password?

    My CC cloud app signs me out when I enter my password..my password works on the web site..and yes I paid my bill..never missed a payment. So Im NOT getting updates or fixes...anybody have an idea how to fix this...Ive already changed my password today..and the website has excepted it...just not the CC updater...Funny I thought this was the whole reason we went to the cloud sub model..to be able to update at any time...Help..

    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Maybe you are looking for