Getting ORA-04091: table SALUSER.PRM_M_EMPLOYEE is mutating, trigger/
create or replace trigger prm_tr_emp_active
before update or insert on prm_m_employee
referencing NEW as new_data OLD as old_data
for each row
declare
v_tag number ;
--PRAGMA AUTONOMOUS_TRANSACTION;
begin
select NVL2( PMEP_FATHER_NAME, 1, 0) * NVL2( PMEP_MOTHER_NAME, 1, 0) *
NVL2( PMEP_NATIONALITY, 1, 0) * NVL2( PMEP_RELIGION_CODE, 1, 0)*
NVL2( PMEP_SEX, 1, 0) * NVL2( PMEP_DOB, 1, 0) * NVL2( PMEP_QUALIFICATION, 1, 0) *
NVL2( PMEP_APPOINTMENT_TYPE, 1, 0) * NVL2( PMEP_DESIGNATION, 1, 0) *
NVL2( PMEP_DOJ, 1, 0) * NVL2( PMEP_LOCATION_CODE, 1, 0) * NVL2( PMEP_SKILL_CODE, 1, 0) *
NVL2( PMEP_GRADE_CODE, 1, 0) * NVL2( PMEP_ONSITE_TAG, 1, 0) * NVL2( PMEP_NIL_SALARY_TAG, 1, 0) *
NVL2( PMEP_HOLD_EBC_TAG, 1, 0) * NVL2( PMEP_EX_SERVICE_MAN, 1, 0) *
NVL2( PMEP_NRI_STATUS, 1, 0) * NVL2( PMEP_PAYMENT_CURRENCY, 1, 0) *
NVL2( PMEP_TAX_BY_COMPANY, 1, 0) * NVL2( PMEP_FNF_SETTLED, 1, 0) *
NVL2( PMEP_PAN_NO, 1, 0) * NVL2( PMEP_STATE_CODE, 1, 0) * NVL2( PMEP_MARITAL_STATUS, 1, 0)*
NVL2( PMEP_SAF_MEMBER, 1, 0) * NVL2( PMEP_SAF_THRU_SALARY, 1, 0) *
NVL2( PMEP_SAF_ENCASHMENT, 1, 0) * NVL2( PMEP_TDS_ON_PF_INT, 1, 0) *
NVL2( PMEP_PROCESS_BY_SSC, 1, 0) * NVL2( PMEP_CITY_CODE, 1, 0)
into v_tag
from prm_m_employee
where pmep_emp_id = :new_data.pmep_emp_id ;
if v_tag = 1 then
update prm_m_employee set
pmep_active = 'Y'
where pmep_emp_id = :new_data.pmep_emp_id ;
else
update prm_m_employee set
pmep_active = 'N'
where pmep_emp_id = :new_data.pmep_emp_id ;
end if ;
--COMMIT;
end ;
Assuming that pmep_emp_id is the primary key of the table, it doesn't appear that you need to do a SELECT against the table or an UPDATE against the table. If that is the primary key, then you should just need to manipulate the :new.column_name values for the row you are modifying, i.e.
v_tag := NVL2( :new.pmep_father_name, 1, 0 ) * NVL2( :new.pmep_mother_name, 1, 0 ) *
NVL2( :new.pmep_nationality, 1, 0 ) * ...
IF( v_tag = 1 )
THEN
:new.pmep_active := 'Y';
ELSE
:new.pmep_active := 'N';
END IF;You would absolutely want to avoid trying to use an autonomous transaction here. The autonomous transaction would not be able to see data inserted by the current transaction and commits happen outside the scope of the calling transaction. Barring a logging operation where you want the log to remain even if the logging event is rolled back (i.e. log attempts to delete a row even if the attempt fails), you should not use autonomous transactions in triggers. And you should not be using autonomous transactions to work around mutating trigger errors.
Justin
Edited by: Justin Cave on Mar 11, 2009 2:23 AM
Similar Messages
-
How to get around ora-ORA-04091: table SSBOSS.SSTRMAST is mutating, trigger
hi,
Does anyone know how one would get around this problem please ?
Here is my dbase trig:
CREATE OR REPLACE TRIGGER SSBOSS.new_not_greater_than_net
BEFORE INSERT OR UPDATE OF newrent ON SSBOSS.SSTRMAST
REFERENCING NEW AS new OLD AS old
FOR each row
DECLARE
not_permitted EXCEPTION;
vnum number := ssboss.nik_f;
BEGIN
IF :new.NEWRENT > vnum then
--AND :old.DELETED = 'N' THEN
RAISE not_permitted;
END IF;
EXCEPTION
WHEN not_permitted THEN
RAISE_APPLICATION_ERROR
(-20001, 'NEWRENT:'||:new.newrent||' '||'OLDRENT:'||' '||:old.netrent||'Action not permitted. Contribution (sstrmast.newrent) value '
||:new.NEWRENT
||' exceeds GROSS rental value (sstrmast.netrent) ');
END;
Here is my problem:
SQL> update sstrmast set newrent = 11;
update sstrmast set newrent = 11
ERROR at line 1:
ORA-04091: table SSBOSS.SSTRMAST is mutating, trigger/function may not see it
ORA-06512: at "SSBOSS.NIK_F", line 4
ORA-06512: at "SSBOSS.NEW_NOT_GREATER_THAN_NET", line 4
ORA-04088: error during execution of trigger 'SSBOSS.NEW_NOT_GREATER_THAN_NET'
I understand why but not how to correct?
Thanks,
nikolia.Hello,
This problem as you might be knowing occurs when you try to select the data from the same table on which the trigger is written. Also this problem is only with the row level trigger and not with the statement level trigger. However the limitation of the statement level trigger is it can not refer to :NEW or :OLD. So now the solution is to capture the value of :NEW or :OLD in the row level trigger (no select statement here) and store it in some global variable. And how do you get the global variable? Using package specification ! a variable declared in a package specification is global in nature. Then use the value so stored in the statement level trigger in the select statement. It will work. Other solution is to use pragma autonomous transaction. Try and let us know. All the best.
Regards -
Hi,
I keep getting this error message for my trigger when performing an
insert..select statement (standard plain old insert works):
ORA-04091: table ... is mutating, trigger/function may not see it
The trigger is as follows:
CREATE OR REPLACE TRIGGER MYTABLE_BEF_INS_CHECK
BEFORE INSERT ON MYTABLE
DECLARE
v_o_id number(10);
BEGIN
IF :new.TYP = 'O' THEN
SELECT 1
INTO v_o_id
FROM MYTABLE WHERE TYP = 'O' AND ID=:new.ID;
END IF;
END;
The thing is the trigger works fine for a standard insert like:
insert into MYTABLE( id,typ)
values(426672,'O')
No problem the above works. But when I try an insert select..it
fails.
insert into MYTABLE( id,typ)
SELECT x_id, 'O' from AnyOtherTable;
the above will fail.
Anyone an idea why this is the case??
thx.Hi,
OK OK !!!! This was a copy/paste error. FOR EACH ROW was just not pasted here. Full trigger again:
CREATE OR REPLACE TRIGGER MYTABLE_BEF_INS_CHECK
BEFORE INSERT ON MYTABLE
for each row
DECLARE
v_o_id number(10);
BEGIN
IF :new.TYP = 'O' THEN
SELECT 1
INTO v_o_id
FROM MYTABLE WHERE TYP = 'O' AND ID=:new.ID;
END IF;
END;
But I want to know why I DO NOT get this problem with the standard insert statement but only with the insert...select.
thx.
S. -
ORA-04091 table string.string is mutating, trigger/function may not see it
When I am tending to delete something from my table I received this message.
I defined a PL/SQL function reads data from that table. Is that meaning I could not modify anything in table once I have some PL/SQL defined on that? It sounds ridiculour. Or I missed some points?
Anyone could help me out?
Many thanks,
QiangIn get_point_coordinates(point_id, layerid), it does not have any codes deleting thing from point_tab.
Its functionality is to find out that specified point;
put its coordinates into SDO_GEOMETRY object and return as function value.
However, oracle does not allow me to delete any data from point table since then.It is saying that function (get_point_coordinates) can not know mutating tables.
When I run delete task:
delete from point$_view where point_id = 1;
I got errors:
ERROR at line 1:
ORA-04091: table POINT$_TABLE is mutating, trigger/functio
n may not see it
ORA-06512: at "GET_POINT_COORDINATES", /* THIS LINE REPORS ERROR*/ Look at codes below.
The following is code of function: GET_POINT_COORDINATES
FUNCTION GET_POINT_COORDINATES(pPoint_ID IN NUMBER, player_ID IN NUMBER)
RETURN MDSYS.SDO_GEOMETRY DETERMINISTIC IS
PSRID NUMBER :=NULL:
PLON NUMBER := NULL;
PLAT NUMBER := NULL;
CURSOR get_lonlat(ppoint_id IN NUMBER, player_id IN NUMBER) IS SELECT LON,LAT
FROM POINT$_VIEW /* THIS LINE REPORS ERROR*/
WHERE player_id = layer_id AND ppoint_id = point_id;
BEGIN
PSRID := 8265;
OPEN get_lonlat(pPoint_ID,Player_ID);
FETCH get_lonlat INTO PLON, PLAT;
RETURN MDSYS.SDO_GEOMETRY(2001,PSRID,MDSYS.SDO_POINT_TYPE(PLON,PLAT,NULL),NULL ,NULL);
END GET_POINT_GEOM;
I guess it has nothing with foreign key. There is something wrong with this function.
By the way, a spatail index is built on this function. Does this make any differences on this point? -
ORA-04091: table ...is mutating, trigger/function may
when I run a delete on this table I have the error
ORA-04091: table MICRODEV.T086_LIEN_INSC is mutating, trigger/function may not see it
ORA-06512: at "MICRODEV.TG_DEL_T086_LIEN_INSC", line 5
ORA-04088: error during execution of trigger 'MICRODEV.TG_DEL_T086_LIEN_INSC'
How Can I workaround it
CREATE OR REPLACE TRIGGER "MICRODEV"."TG_DEL_T086_LIEN_INSC"
BEFORE
DELETE ON "MICRODEV"."T086_LIEN_INSC" FOR EACH ROW DECLARE lNbRows NUMBER(1);
BEGIN
IF :OLD.CO_PART_DNOM_SOC = 'DS' THEN
SELECT 1 INTO lNbRows
FROM T086_LIEN_INSC
WHERE NO_SEQ_LIEN_DNOM = :OLD.NO_SEQ_LIEN_INSC
AND NO_INSC = :OLD.NO_INSC
AND CO_PART_DNOM_SOC <> 'PA';
IF lNbRows = 1 THEN
raise_application_error(-20100, 'TRIGGER On Delete (T086_LIEN_INSC)');
END IF;
SELECT 2 INTO lNbRows
FROM T086_LIEN_INSC
WHERE NO_SEQ_LIEN_DNOM = :OLD.NO_SEQ_LIEN_INSC
AND NO_INSC = :OLD.NO_INSC
AND CO_PART_DNOM_SOC = 'PA';
IF lNbRows = 2 THEN
raise_application_error(-20101, 'TRIGGER On Delete (T086_LIEN_INSC)');
END IF;
END IF;
END;when I run a delete on this table I have the error
ORA-04091: table MICRODEV.T086_LIEN_INSC is mutating, trigger/function may not see it
ORA-06512: at "MICRODEV.TG_DEL_T086_LIEN_INSC", line 5
ORA-04088: error during execution of trigger 'MICRODEV.TG_DEL_T086_LIEN_INSC'
How Can I workaround it
CREATE OR REPLACE TRIGGER "MICRODEV"."TG_DEL_T086_LIEN_INSC"
BEFORE
DELETE ON "MICRODEV"."T086_LIEN_INSC" FOR EACH ROW DECLARE lNbRows NUMBER(1);
BEGIN
IF :OLD.CO_PART_DNOM_SOC = 'DS' THEN
SELECT 1 INTO lNbRows
FROM T086_LIEN_INSC
WHERE NO_SEQ_LIEN_DNOM = :OLD.NO_SEQ_LIEN_INSC
AND NO_INSC = :OLD.NO_INSC
AND CO_PART_DNOM_SOC <> 'PA';
IF lNbRows = 1 THEN
raise_application_error(-20100, 'TRIGGER On Delete (T086_LIEN_INSC)');
END IF;
SELECT 2 INTO lNbRows
FROM T086_LIEN_INSC
WHERE NO_SEQ_LIEN_DNOM = :OLD.NO_SEQ_LIEN_INSC
AND NO_INSC = :OLD.NO_INSC
AND CO_PART_DNOM_SOC = 'PA';
IF lNbRows = 2 THEN
raise_application_error(-20101, 'TRIGGER On Delete (T086_LIEN_INSC)');
END IF;
END IF;
END; -
I have a problem. Here is a trigger that I'm working with.
CREATE OR REPLACE TRIGGER Trgedw_extract
AFTER INSERT OR UPDATE OF completioncode ON CCS.t_processlog
FOR EACH ROW
WHEN ( (OLD.filename = 'ACCTINFO') AND (OLD.completioncode = 1) )
BEGIN
CCS.Edwextract;
END;The t_processlog table has a field (processid) that is the primary key. However the processid wasn't setup as a sequence number directly through Oracle. It was set up as a sequence number through a trigger. (Don't ask...)
The code for the procedure that the code above call is here.
CREATE OR REPLACE PROCEDURE Edwextract AS
Jobname: Edwextract
Author: Adam Bolduc
Date: 6/18/2001
Purpose: To run the monthly jobs (ccs.populateedw92, ccs.populateedw54) to
populate the t_edw table and export the data to a flat file on the system.
This file will be sent to edw. Then drop and recreate the index on the t_edw table
to access the data faster.
EDW92 EXCEPTION;
EDW54 EXCEPTION;
PUTLINE_ERROR EXCEPTION;
FILE_OPEN_ERROR EXCEPTION;
FILE_CLOSE_ERROR EXCEPTION;
DROP_INDEX_FLAG EXCEPTION;
CREATE_INDEX_FLAG EXCEPTION;
dPid ccs.t_processlog.PROCESSID%TYPE;
szdata_rec CHAR(1436);
outfile_name VARCHAR2(50) DEFAULT 'edw.txt';
outfile_dir VARCHAR2(100) DEFAULT '/scratch/edw/';
outfile_handle UTL_FILE.file_type;
szSQLErrText VARCHAR2(250);
iRetValue PLS_INTEGER;
icursor_name INTEGER;
irows_processed INTEGER;
dtDateProcess ccs.t_processlog.PROCESSDATE%TYPE;
CURSOR edw_extract_cur IS
SELECT
ccs.t_edw.RECORDIDENTIFIER| |
ccs.t_edw.TSYSVERSIONINDICATOR| |
ccs.t_edw.TS1CREDITRATING| |
ccs.t_edw.TS1BILLINGTYPE| |
ccs.t_edw.TS1PROCESSTYPE| |
ccs.t_edw.TS1BANKNUMBER| |
ccs.t_edw.TS1AGENTBANKNUMBER| |
ccs.t_edw.PRODUCTCODE| |
ccs.t_edw.CLIENTPRODUCTCODE| |
ccs.t_edw.TRACKINGNUMBER| |
ccs.edwaccountencrypt(ccs.t_edw.ACCOUNTNUMBER)| |
' '| |
ccs.t_edw.NAMEPRIMARY| |
ccs.t_edw.NAMECOAPP| |
ccs.t_edw.ADDRESSLINE1| |
ccs.t_edw.ADDRESSLINE2| |
ccs.t_edw.CITY| |
ccs.t_edw.STATEPROVINCECODE| |
ccs.t_edw.ZIPCODE| |
ccs.edwssnencrypt(ccs.t_edw.SSN)| |
ccs.t_edw.HOMEPHONENUMBER| |
ccs.t_edw.PHOTOCARDINDICATOR| |
ccs.t_edw.ACCOUNTTYPE| |
NVL(ccs.t_edw.InsuranceType , '000' )| |
ccs.t_edw.ASSETPOOLNUMBER| |
ccs.t_edw.STATEMENTHOLDCODE| |
ccs.t_edw.BRANCHNUMBER| |
ccs.t_edw.BANKRUPTCYPREDICTORSCORE| |
ccs.t_edw.DATELASTBANKRUPTCYRESCORE| |
NVL(ccs.t_edw.DATEOPEN,'0000000')| |
ccs.t_edw.DATEEXPIRATION| |
ccs.t_edw.DATECUSTOMERBIRTH| |
ccs.t_edw.DATECLOSEDVOLUNTARY| |
ccs.t_edw.DATECLOSEDINVOLUNTARY| |
ccs.t_edw.DATELASTACTIVE| |
ccs.t_edw.DATELASTPAYMENT| |
ccs.t_edw.DATELASTPURCHASE| |
ccs.t_edw.DATECHARGEOFF| |
NVL(ccs.t_edw.DateLastStatement , '0000000' )| |
ccs.t_edw.DATEHIGHESTBALANCELTD| |
ccs.t_edw.DATELASTCREDITLIMITCHANGE| |
ccs.t_edw.STATUSCLOSED| |
ccs.t_edw.STATUSCREDITREVOKED| |
ccs.t_edw.STATUSPASTDUE| |
ccs.t_edw.STATUSCHARGEOFF| |
NVL(ccs.t_edw.StatusSkipPayment , ' ' )| |
ccs.t_edw.CHARGEOFFTYPE| |
NVL(ccs.t_edw.MinimunPaymentDue , '000000000000000' )| |
ccs.t_edw.CURRENTBALANCE| |
NVL(ccs.t_edw.PreviousStatementBalance , '000000000000000' )| |
ccs.t_edw.BALANCECHARGEDOFF| |
ccs.t_edw.CURRENTCREDITLIMIT| |
ccs.t_edw.ORIGINALCREDITLIMIT| |
NVL(ccs.t_edw.BalancePastDueCycle , '000000000000000' )| |
ccs.t_edw.HIGHESTBALANCELTD| |
NVL(ccs.t_edw.AnnualFeeCharge , '000000000000000' )| |
ccs.t_edw.AVAILABLEMONEY| |
ccs.t_edw.NUMCREDITLIMITINCREASES| |
ccs.t_edw.NUMCREDITLIMITDECREASES| |
NVL(ccs.t_edw.APRPurchases , '000000' )| |
NVL(ccs.t_edw.APRCash , '000000' )| |
NVL(ccs.t_edw.APROldPurchases , '000000' )| |
ccs.t_edw.APRBALTRANSFER1| |
NVL(ccs.t_edw.APRPromoCash , '000000' )| |
NVL(ccs.t_edw.APRPromoPurchases , '000000' )| |
ccs.t_edw.APRBALTRANSFER2| |
NVL(ccs.t_edw.RateTypePurchases , ' ' )| |
NVL(ccs.t_edw.RateTypeCash , ' ' )| |
ccs.t_edw.RATETYPEOLDPURCHASES| |
ccs.t_edw.RATETYPEBALTRANSFER1| |
ccs.t_edw.RATETYPEPROMOCASH| |
ccs.t_edw.RATETYPEPROMOPURCHASES| |
ccs.t_edw.RATETYPEBALTRANSFER2| |
NVL(ccs.t_edw.ADBPurchases , '000000000000000' )| |
NVL(ccs.t_edw.ADBCash , '000000000000000' )| |
ccs.t_edw.ADBOLDPURCHASES| |
ccs.t_edw.ADBBALTRANSFER1| |
ccs.t_edw.ADBPROMOCASH| |
ccs.t_edw.ADBPROMOPURCHASES| |
ccs.t_edw.ADBBALTRANSFER2| |
ccs.t_edw.ASSESSEDFEEANNUAL| |
NVL(ccs.t_edw.AssessedFeeCash , '000000000000000' )| |
NVL(ccs.t_edw.AssessedFeeFinanceCharges, '000000000000000' )| |
NVL(ccs.t_edw.AssessedFeeInsurance , '000000000000000' )| |
NVL(ccs.t_edw.AssessedFeeLate , '000000000000000' )| |
NVL(ccs.t_edw.AssessedFeeOverlimit , '000000000000000' )| |
ccs.t_edw.ASSESSEDFEERETURNEDCHECK| |
NVL(ccs.t_edw.BilledTotalDollars , '000000000000000' )| |
NVL(ccs.t_edw.BilledPurchases , '000000000000000' )| |
NVL(ccs.t_edw.BilledCash , '000000000000000' )| |
ccs.t_edw.BILLEDOLDPURCHASES| |
ccs.t_edw.BILLEDBALTRANSFER1| |
ccs.t_edw.BILLEDPROMOCASH| |
ccs.t_edw.BILLEDPROMOPURCHASES| |
ccs.t_edw.BILLEDBALTRANSFER2| |
ccs.t_edw.BILLEDMISC| |
NVL(ccs.t_edw.BilledFinanceCharges , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesPurchases , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesCashAdvances , '000000000000000' )| |
ccs.t_edw.NEWCHARGESCONVCHECK| |
NVL(ccs.t_edw.NewChargesATM , '000000000000000' )| |
ccs.t_edw.NEWCHARGESBALXFERPURCH| |
ccs.t_edw.NEWCHARGESBALXFERCHECK| |
NVL(ccs.t_edw.NewChargesFinanceCharges , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesCashFees , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesInsuranceFees , '000000000000000' )| |
ccs.t_edw.NEWCHARGESRETURNEDCHECKS| |
NVL(ccs.t_edw.NewChargesOverlimitFees , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesPurchaseFC , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesCashFC , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesAnnualFees , '000000000000000' )| |
NVL(ccs.t_edw.NewChargesLateFees , '000000000000000' )| |
NVL(ccs.t_edw.AmountOfPayments , '000000000000000' )| |
NVL(ccs.t_edw.AmountOfCredits , '000000000000000' )| |
NVL(ccs.t_edw.NumberOfPurchases , '00000' )| |
NVL(ccs.t_edw.NumberOfCashAdvances , '00000' )| |
ccs.t_edw.TS1COMPANYNUMBER| |
ccs.t_edw.COUNTRYCODE| |
' '| | -- MCIF Close code
ccs.t_edw.FILENUMBER| |
' '| |
' '| |
'00000'| |
' '| |
'000000000000000'| |
'0000000'| |
'00000'| |
' '| |
'000000000000000'| |
' '| |
' '| |
' '| |
' '| |
' '| |
' '| |
' '| |
' '| |
DECODE(ccs.t_account.prodind, 1, ' ', 'F')
FROM
ccs.t_edw,
ccs.t_account
WHERE ccs.t_edw.accountid = ccs.t_account.accountid
AND ccs.t_account.dateopen = to_date(ccs.t_edw.DATEOPEN,'yyyyddd')
AND ccs.t_account.dateopen < (add_months(dtDateProcess,1)-1);
BEGIN
SELECT max(processdate)
INTO dtDateProcess
FROM ccs.t_processlog
WHERE filename = 'ACCTINFO';
-- Create a log entry in the t_processlog
INSERT INTO ccs.t_processlog
(filename,processdate,completioncode)
VALUES
('EDWEXTRACT',dtDateProcess,9);
SELECT max(processid)
INTO dPid
FROM ccs.t_processlog
WHERE filename = 'EDWEXTRACT'
AND processdate = dtDateProcess;
iRetValue := CCS.StartPID(dPid, 0, 0);
ccs.populateedw92(1, dtDateProcess);
IF (SQLCODE != 0) THEN
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 99, 'ccs.populateedw92 failed! See t_exception for error.',0);
RAISE EDW92;
END IF;
ccs.populateedw54(2, dtDateProcess);
IF (SQLCODE != 0) THEN
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 99, 'ccs.populateedw54 failed! See t_exception for error.',0);
RAISE EDW54;
END IF;
OPEN edw_extract_cur;
-- Caution: UTL_FILE.FOPEN using w option! Will overwrite existing file!
outfile_handle := UTL_FILE.FOPEN(outfile_dir,outfile_name,'w',1437);
IF (SQLCODE != 0) THEN
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 99, 'Problem creating data file! See t_exception for error.',0);
RAISE FILE_OPEN_ERROR;
END IF;
LOOP
FETCH edw_extract_cur INTO szdata_rec;
EXIT WHEN edw_extract_cur%NOTFOUND;
UTL_FILE.PUT_LINE(outfile_handle,szdata_rec);
IF (SQLCODE != 0) THEN
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 99, 'Problem creating data file! See t_exception for error.',0);
RAISE PUTLINE_ERROR;
END IF;
END LOOP;
-- update t_processlog with status of 1 for dPid
UTL_FILE.FCLOSE (outfile_handle);
IF (SQLCODE != 0) THEN
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 99, 'Problem closing data file! See t_exception for error.',0);
RAISE FILE_CLOSE_ERROR;
END IF;
-- Drop index on t_edw table
icursor_name := sys.dbms_sql.open_cursor;
sys.dbms_sql.parse(icursor_name,'DROP INDEX ccs.i_t_edw_accountid ', sys.dbms_sql.v7);
irows_processed := sys.dbms_sql.execute(icursor_name);
sys.dbms_sql.close_cursor(icursor_name);
IF (sqlcode != 0) THEN
RAISE DROP_INDEX_FLAG;
ELSE
COMMIT;
END IF;
-- Recreate index on t_edw table
icursor_name := sys.dbms_sql.open_cursor;
sys.dbms_sql.parse(icursor_name,'CREATE INDEX ccs.i_t_edw_accountid ON ccs.t_edw (accountid) tablespace tsindex storage (initial 30m next 30m pctincrease 0) parallel(degree 5) nologging', sys.dbms_sql.v7);
irows_processed := sys.dbms_sql.execute(icursor_name);
sys.dbms_sql.close_cursor(icursor_name);
IF (sqlcode != 0) THEN
RAISE CREATE_INDEX_FLAG;
ELSE
iRetValue := CCS.UpdatePIDDesc(dPid, 1, 1, 'EDWEXTRACT Completed successfully.',0);
COMMIT;
END IF;
EXCEPTION WHEN EDW54 THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'The populateedw54 failed! Contact support personnel.');
WHEN EDW92 THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'The populateedw92 failed! Contact support personnel.');
WHEN DROP_INDEX_FLAG THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Failed to drop index on t_edw table! Contact support personnel.');
WHEN CREATE_INDEX_FLAG THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Failed to create index on t_edw table! Contact support personnel.');
WHEN NO_DATA_FOUND THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'No data found! Contact support personnel.');
WHEN FILE_CLOSE_ERROR THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Unable to close data file! Contact support personnel.');
WHEN PUTLINE_ERROR THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLE rrText,'Failed to write szdata_rec to file! Contact support personnel.');
WHEN FILE_OPEN_ERROR THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Failed to open data file! Contact support personnel.');
WHEN UTL_FILE.INVALID_PATH THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Invalid path! Contact support personnel.');
WHEN UTL_FILE.INVALID_MODE THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Invalid mode! Contact support personnel.');
WHEN UTL_FILE.INVALID_FILEHANDLE THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Bad file handle! Contact support personnel.');
WHEN UTL_FILE.INVALID_OPERATION THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Invalid operation! Contact support personnel.');
WHEN UTL_FILE.WRITE_ERROR THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Unable to write to file, ERROR! Contact support personnel.');
WHEN UTL_FILE.INTERNAL_ERROR THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'Utl_file internal error! Contact support personnel.');
WHEN OTHERS THEN
szSQLErrText := SUBSTR(SQLERRM,1,250);
iRetValue := ccs.ExceptionWrite(dPid,szSQLErrText,'EDWEXTRACT failed due to unknown reason! Contact support personnel.');
END;
/I guess my confusion is how can I put a trigger on the t_processlog table to start a job when another finishes, and still have the job called make an entry into the t_processlog? I looked at the code for suggested work around, but I'm a little confused as to what is going on. Can anyone give me an idea for what to do in the situation? Thanks.
Adam Bolduc
nullI didn't see your coding but i think you are selecting the same table through the procedure, on which you have written the db trigger.
In that case it will alway gives you mutating error.
Sanjeev -
ORA-04091: table QA.LIB_ACCESSION_LOG is mutating
hi
while executing this:
SQL> insert into LIB_ACCESSION_LOG select * from LIB_ACCESSION_LOG11;
insert into LIB_ACCESSION_LOG select * from LIB_ACCESSION_LOG11
ERROR at line 1:
ORA-04091: table QA.LIB_ACCESSION_LOG is mutating, trigger/function may not
see it
ORA-06512: at "QA.TRG_ACCESSION_LOG", line 2
ORA-04088: error during execution of trigger 'QA.TRG_ACCESSION_LOG'
how can i do this insert and resolve this error. should i switch off the constraints? and what will happen when i switch on the constraints?ORA-04091, ORA-06512, ORA-04088.
-
ORA-04091 (table string.string is mutating) and Function-Based Index
I've encountered a problem with DELETEing from a table when that table has a function-based index on it. The following demonstrates this:
SQL> CREATE OR REPLACE FUNCTION get_employee_location(p_empno IN number)
2 RETURN varchar2
3 DETERMINISTIC
4 IS
5 l_return_value varchar2(20);
6 BEGIN
7 SELECT loc
8 INTO l_return_value
9 FROM dept
10 WHERE deptno = (SELECT
11 e.deptno
12 FROM emp e
13 WHERE empno = p_empno);
14 return l_return_value;
15 end;
16 /
Function created.
SQL> create index location_idx on emp (get_employee_location(empno));
Index created.
SQL> delete from emp;
delete from emp
ERROR at line 1:
ORA-04091: table SCOTT.EMP is mutating, trigger/function may not see it
ORA-06512: at "SCOTT.GET_EMPLOYEE_LOCATION", line 7------------------------------------------------
The question is: How can I successfully DELETE FROM emp but keep my function-based index in place?
Thanks
Andy'Being able to' is 'being able to', but
it is dangerous to declare "DETERMINISTIC" for non-deterministic function.
The following problem happens on non-deterministic function index.
SQL> update dept set loc = 'NEWYORK' where deptno=10;
1 row updated.
SQL> commit;
Commit complete.
SQL> select * from emp where get_employee_location(deptno)='NEWYORK';
no rows selected
SQL> select * from dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEWYORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> select empno,ename from emp where get_employee_location(deptno)='NEW YORK';
EMPNO ENAME
7782 CLARK
7839 KING
7934 MILLER
SQL> select empno,ename,get_employee_location(deptno) from emp where deptno=10;
EMPNO ENAME GET_EMPLOYEE_LOCATION(DEPTNO)
7782 CLARK
7839 KING
7934 MILLER
SQL> select empno,ename,get_employee_location(deptno) from emp where get_employee_location(deptno)='NEW YORK';
EMPNO ENAME GET_EMPLOYEE_LOCATION(DEPTNO)
7782 CLARK NEW YORK
7839 KING NEW YORK
7934 MILLER NEW YORK
SQL> drop index location_idx ;
Index dropped.
SQL> select empno,ename from emp where get_employee_location(deptno)='NEW YORK';
no rows selected -
Hi,
I have a trigger which executes a stored procedure.
Trigger
=======
CREATE OR REPLACE TRIGGER mhubadmin.call_proc_ratesheet_new
after INSERT OR delete ON mhubadmin.pvt_br_ratesheet
FOR EACH ROW
declare
var_orgid number;
begin
if inserting then
select org_child_id into var_orgid from business_relationship where br_id=:new.br_id;
mhubadmin.proc_ratesheet_new(var_orgid);
else
select org_child_id into var_orgid from business_relationship where br_id=:old.br_id;
mhubadmin.proc_ratesheet_new(var_orgid);
end if;
end;
Stored Procedure
==============
CREATE OR REPLACE PROCEDURE proc_ratesheet_new(var_orgid in number)
IS
cursor c3 is select distinct(purs.user_id) from hubuser hu
inner join PVT_USER_RATESHEET purs on hu.USER_ID=purs.USER_ID
where hu.ORG_ID=var_orgid;
cursor c1(varUser_id number) is select purs.user_id,purs.ratesheet_id from hubuser hu
inner join PVT_USER_RATESHEET purs on hu.USER_ID=purs.USER_ID
where hu.ORG_ID=var_orgid and purs.USER_ID=varUser_id;
cursor c2(varUser_id number) is select hu.user_id,pbr.ratesheet_id from HUBUSER hu
inner join BUSINESS_RELATIONSHIP br on hu.ORG_ID=br.ORG_CHILD_ID
inner join PVT_BR_RATESHEET pbr on br.BR_ID=pbr.BR_ID
where hu.user_id in(select distinct(purs.USER_ID) from hubuser hu
inner join PVT_USER_RATESHEET purs
on hu.USER_ID=purs.USER_ID
where hu.ORG_ID=var_orgid) and hu.user_id=varUser_id;
foundFlag boolean;
BEGIN
for c3var in c3 loop
for c2var in c2(c3var.user_id) loop
foundFlag:=false;
for c1var in c1(c3var.user_id) loop
if c2var.ratesheet_id=c1var.ratesheet_id then
foundFlag:=true;
exit;
end if;
end loop;
if foundFlag=False then
insert into pvt_user_ratesheet (username_ratesheet_id,user_id,ratesheet_id) values (SEQ_USER_RATESHEET.nextval,c3var.user_id,c2var.ratesheet_id);
end if;
end loop;
end loop;
for c3var in c3 loop
for c1var in c1(c3var.user_id) loop
foundFlag:=false;
for c2var in c2(c3var.user_id) loop
if c1var.ratesheet_id=c2var.ratesheet_id then
foundFlag:=true;
exit;
end if;
end loop;
if foundFlag=False then
delete from pvt_user_ratesheet where user_id=c3var.user_id and ratesheet_id=c1var.ratesheet_id;
end if;
end loop;
end loop;
--EXCEPTION
--- WHEN OTHERS THEN
--- DBMS_OUTPUT.put_line (SQLCODE||' '|| SQLERRM);
END;
But while firing this trigger I am getting an error like this,
ORA-04091: table MHUBADMIN.PVT_BR_RATESHEET is mutating, trigger/function may not see it
ORA-06512: at "MHUBADMIN.PROC_RATESHEET_NEW", line 14
ORA-06512: at "MHUBADMIN.PROC_RATESHEET_NEW", line 25
ORA-06512: at "MHUBADMIN.CALL_PROC_RATESHEET_NEW", line 6
ORA-04088: error during execution of trigger 'MHUBADMIN.CALL_PROC_RATESHEET_NEW'
Regards,
MathewYes, and I'm reading this on a computer screen!
What functional requirement are you trying to achieve?
And have you googled? If so, you would have found this
http://asktom.oracle.com/tkyte/Mutate/index.html
Cheers,
Colin -
SQL, PL/SQL functions, and ORA-04091 table is mutating
Dears,
Recently a question came up in an Oracle French forum about an insert/select that is throwing ORA-04091: table xxxx is mutating, trigger/function may not see it error in 11g while the same insert/select was working very well in 10g. The original poster gave a scenario that is easily reproducible. I am wondering what database release is correct the one throwing the error(11g) or the other one accepting the insert/select(10g)?
*10g*
mhouri.world > select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
mhouri.world > create table t_read_consistency (id number, vc varchar2(15), primary key (id));
Table created.
mhouri.world > insert into
2 t_read_consistency
3 select
4 rownum id,
5 rpad('a',15,'a')
6 from
7 dual
8 connect by
9 level<=1000;
1000 rows created.
mhouri.world > commit;
Commit complete.
mhouri.world > create or replace function f_read_consistency return varchar2
2 as
3 lv_vc t_read_consistency.vc%type;
4 begin
5 select trc.vc
6 into lv_vc
7 from t_read_consistency trc
8 where trc.id = 70 ;
9 return lv_vc;
10 end f_read_consistency;
11 /
Function created.
mhouri.world >insert into
2 t_read_consistency (id, vc)
3 select
4 1001
5 ,f_read_consistency
6 from dual;
,f_read_consistency
ERROR at line 5:
ORA-04091: table MHOURI.T_READ_CONSISTENCY is mutating, trigger/function may not see it
ORA-06512: at "MHOURI.F_READ_CONSISTENCY", line 5
_11g_
mohamed@mhouri> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
mohamed@mhouri> create table t_read_consistency (id number, vc varchar2(15), primary key (id));
Table created.
mohamed@mhouri> insert into
2 t_read_consistency
3 select
4 rownum id,
5 rpad('a',15,'a')
6 from
7 dual
8 connect by
9 level<=1000;
1000 rows created.
mohamed@mhouri> create or replace function f_read_consistency return varchar2
2 as
3 lv_vc t_read_consistency.vc%type;
4 begin
5 select trc.vc
6 into lv_vc
7 from t_read_consistency trc
8 where trc.id = 70 ;
9 return lv_vc;
10 end f_read_consistency;
11 /
Function created.
mohamed@mhouri> insert into
2 t_read_consistency (id, vc)
3 select
4 1001
5 ,f_read_consistency
6 from dual;
,f_read_consistency
ERROR at line 5:
ORA-04091: table MOHAMED.T_READ_CONSISTENCY is mutating, trigger/function may
not see it
ORA-06512: at "MOHAMED.F_READ_CONSISTENCY", line 5 So far so good. Same behaviour for both releases. But let's bring a small change to the PL/SQL function to be as close as the example given in the French Forum
_10g where the select/insert was working without error_:
mhouri.world > select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
mhouri.world > create type t_read_cs as object (id number,vc varchar2(15));
2 /
Type created.
mhouri.world > create type t_read_cs_tab as table of t_read_cs;
2 /
Type created.
mhouri.world > create or replace function f_read_consistency_tab
2 return t_read_cs_tab
3 as
4 lc_t_read_cs_tab t_read_cs_tab := t_read_cs_tab();
5 j binary_integer := 0;
6 begin
7 for x in (select
8 id,
9 vc
10 from t_read_consistency trs
11 where trs.id <= 10
12 ) loop
13
14 j := j +1;
15 lc_t_read_cs_tab.extend;
16 lc_t_read_cs_tab(j) := t_read_cs(x.id, x.vc);
17 end loop;
18 RETURN lc_t_read_cs_tab;
19 end f_read_consistency_tab;
20 /
Function created.
mhouri.world > select count(1) from t_read_consistency;
COUNT(1)
1000
mhouri.world > select count(1)
2 from (select * from table(f_read_consistency_tab));
COUNT(1)
10
mhouri.world > insert into t_read_consistency
2 (id,vc)
3 select id,vc
4 from table(f_read_consistency_tab)
5 ;
10 rows created.
mhouri.world > select count(1) from t_read_consistency;
COUNT(1)
1010
_11g where the same insert/select is throwing an error:_
mohamed@mhouri> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
mohamed@mhouri> create type t_read_cs as object (id number,vc varchar2(15));
2 /
Type created.
mohamed@mhouri> create type t_read_cs_tab as table of t_read_cs;
2 /
Type created.
mohamed@mhouri> create or replace function f_read_consistency_tab
2 return t_read_cs_tab
3 as
4 lc_t_read_cs_tab t_read_cs_tab := t_read_cs_tab();
5 j binary_integer := 0;
6 begin
7 for x in (select
8 id,
9 vc
10 from t_read_consistency trs
11 where trs.id <= 10
12 ) loop
13
14 j := j +1;
15 lc_t_read_cs_tab.extend;
16 lc_t_read_cs_tab(j) := t_read_cs(x.id, x.vc);
17 end loop;
18 RETURN lc_t_read_cs_tab;
19 end f_read_consistency_tab;
20 /
Function created.
mohamed@mhouri> select count(1) from t_read_consistency;
COUNT(1)
1000
mohamed@mhouri> select count(1) from (select * from table(f_read_consistency_tab));
COUNT(1)
10
mohamed@mhouri> insert into t_read_consistency
2 (id,vc)
3 select id,vc
4 from table(f_read_consistency_tab)
5 ;
from table(f_read_consistency_tab)
ERROR at line 4:
ORA-04091: table MOHAMED.T_READ_CONSISTENCY is mutating, trigger/function may
not see it
ORA-06512: at "MOHAMED.F_READ_CONSISTENCY_TAB", line 7 In addition, one of the posters spotted out very judiciously that if we slightly change the definition of the table t_read_consistency in 11g, strangely the insert/select will work correctly in this data base as shown below:
ohamed@mhouri> drop table tr_read_consistency;
Table dropped.
mohamed@mhouri> create table tr_read_consistency
2 as select rownum rn,
3 trs.*
4 from
5 t_read_consistency trs;
Table created.
mohamed@mhouri> insert into tr_read_consistency
2 (rn, id,vc)
3 select rownum, id,vc
4 from table(f_read_consistency_tab);
10 rows created.So is this a regression? or a corrected bug during upgrade?
Thanks in advance
Mohamed HouriI just followed the doc links provided by Tubby, which have 100% Correct answer. See below :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> show user;
USER is "SCOTT"
SQL> create type t_read_cs as object (id number,vc varchar2(15));
2 /
Type created.
SQL> create type t_read_cs_tab as table of t_read_cs;
2 /
Type created.
SQL> create table t_read_consistency (id number, vc varchar2(15), primary key (id));
Table created.
SQL> create or replace function f_read_consistency_tab
2 return t_read_cs_tab
3 as
4 lc_t_read_cs_tab t_read_cs_tab := t_read_cs_tab();
5 j binary_integer := 0;
6 begin
7 for x in (select
8 id,
9 vc
10 from t_read_consistency trs
11 where trs.id <= 10
12 ) loop
13 j := j +1;
14 lc_t_read_cs_tab.extend;
15 lc_t_read_cs_tab(j) := t_read_cs(x.id, x.vc);
16 end loop;
17 RETURN lc_t_read_cs_tab;
18 end f_read_consistency_tab;
19 /
Function created.
SQL> insert into
2 t_read_consistency
3 select
4 rownum id,
5 rpad('a',15,'a')
6 from
7 dual
8 connect by
9 level<=1000;
1000 rows created.
SQL> select count(1) from t_read_consistency;
COUNT(1)
1000
SQL> select count(1) from (select * from table(f_read_consistency_tab));
COUNT(1)
10
SQL> insert into t_read_consistency
2 (id,vc)
3 select id,vc
4 from table(f_read_consistency_tab);
from table(f_read_consistency_tab)
ERROR at line 4:
ORA-04091: table SCOTT.T_READ_CONSISTENCY is mutating, trigger/function may not see it
ORA-06512: at "SCOTT.F_READ_CONSISTENCY_TAB", line 7
SQL> ed
Wrote file afiedt.buf
1 create or replace function f_read_consistency_tab
2 return t_read_cs_tab
3 as
4 lc_t_read_cs_tab t_read_cs_tab := t_read_cs_tab();
5 j binary_integer := 0;
6 PRAGMA AUTONOMOUS_TRANSACTION; <--- This works as documented in 11.2.0.1
7 begin
8 for x in (select
9 id,
10 vc
11 from t_read_consistency trs
12 where trs.id <= 10
13 ) loop
14 j := j +1;
15 lc_t_read_cs_tab.extend;
16 lc_t_read_cs_tab(j) := t_read_cs(x.id, x.vc);
17 end loop;
18 RETURN lc_t_read_cs_tab;
19* end f_read_consistency_tab;
SQL> /
Function created.
SQL> insert into t_read_consistency
2 (id,vc)
3 select id,vc
4 from table(f_read_consistency_tab);
insert into t_read_consistency
ERROR at line 1:
ORA-00001: unique constraint (SCOTT.SYS_C0011307) violated
SQL> drop table t_read_consistency purge;
Table dropped.
SQL> create table t_read_consistency (id number, vc varchar2(15));
Table created.
SQL> insert into
2 t_read_consistency
3 select
4 rownum id,
5 rpad('a',15,'a')
6 from
7 dual
8 connect by
9 level<=1000;
1000 rows created.
SQL> commit;
Commit complete.
SQL> insert into t_read_consistency
2 (id,vc)
3 select id,vc
4 from table(f_read_consistency_tab);
10 rows created.
SQL> commit;
Commit complete.
SQL>So, you have to add only PRAGMA AUTONOMOUS_TRANSACTION; before begin in your function code to avoid ORA-04091 in 11.2.0.1
But, All thanks to Tubby who pointed us to the correct documentation link.
Regards
Girish Sharma -
ORA-04091: table blah is mutating, trigger/function may not see it
ORA-04091: table blah is mutating, trigger/function may not see it
ORA-06512: at "AOLALERE.CHK_FOR_POST", line 7
ORA-06512: at "AOLALERE.CHK_FOR_POST", line 20
ORA-06512: at "AOLALERE.PREPRODDTA_F41021_AFTER_UPDATE", line 14
ORA-04088: error during execution of trigger 'AOLALERE.PREPRODDTA_F41021_AFTER_UPDATE'
TRIGGER preproddta_f41021_after_update
after insert or update
on preproddta.f41021
for each row
declare
--nothing to declare
--pragma autonomous_transaction;
l_lipqoh preproddta.f41021.lipqoh%type;
l_lipcom preproddta.f41021.lipcom%type;
l_lihcom preproddta.f41021.lihcom%type;
l_lilots preproddta.f41021.lilots%type;
l_lilocn preproddta.f41021.lilots%type;
l_lilotn preproddta.f41021.lilots%type;
l_quantity_avail f41021_audit.quantity_avail%type;
l_rec_chk f41021_audit.liitm%type;
begin
--chk_for_post(:new.limcu,:new.liitm);
--if :old.limcu <> ' GBD001' then return; end if;
if :old.lipqoh = :new.lipqoh then
l_lipqoh := :old.lipqoh;
else
l_lipqoh := :new.lipqoh;
end if;
if :old.lipcom = :new.lipcom then
l_lipcom := :old.lipcom;
else
l_lipcom := :new.lipcom;
end if;
if :old.lihcom = :new.lihcom then
l_lihcom := :old.lihcom;
else
l_lihcom := :new.lihcom;
end if;
if :old.lilots = :new.lilots then
l_lilots := :old.lilots;
else
l_lilots := :new.lilots;
end if;
if l_lilots <> ' ' then
l_quantity_avail := - (l_lipcom - l_lihcom);
else
l_quantity_avail := l_lipqoh - (l_lipcom + l_lihcom);
end if;
l_rec_chk := rec_chk(:old.limcu,:old.liitm,l_lilots);
if l_rec_chk is not null then
begin
update f41021_audit
set lipqoh = l_lipqoh,
lipcom = l_lipcom,
lihcom = l_lihcom,
quantity_avail = l_quantity_avail
where limcu = :old.limcu
and liitm = :old.liitm
and lilotn = :old.lilotn
and lilocn = :old.lilocn
and lilots = l_lilots;
end;
else
-- insert record into audit table
begin
insert into f41021_audit
(limcu,
liitm,
lipqoh,
lipcom,
lihcom,
lilots,
lilotn,
lilocn,
quantity_avail)
values
(:old.limcu,
:old.liitm,
l_lipqoh,
l_lipcom,
l_lihcom,
l_lilots,
:old.lilotn,
:old.lilocn,
l_quantity_avail);
end;
end if;
end;
create or replace procedure chk_for_post(p_limcu in varchar2,
p_liitm in number)
is
cursor get_bra_qa(p_limcu in varchar2,
p_liitm in number)is
select liitm,
(sum(lipqoh) - sum(lipcom + lihcom)) qual_avail
from preproddta.f41021 a, preproddta.f4101 b
where limcu = p_limcu
and liitm = imitm
and liitm = p_liitm
group by liitm,imdsc1;
l_bra_qa get_bra_qa%rowtype;
l_itm_bran_qa t_f41021_itm_bran_qa := t_f41021_itm_bran_qa.initialize(p_liitm);
begin
open get_bra_qa(p_limcu,p_liitm);
fetch get_bra_qa into l_bra_qa;
close get_bra_qa;
if l_itm_bran_qa.quantity_avail is null then ---This indicate that there is no record for
---quantity available for the item based on the branch .
l_itm_bran_qa := new t_f41021_itm_bran_qa(p_liitm);
begin
l_itm_bran_qa.liitm := p_liitm;
l_itm_bran_qa.limcu := p_limcu;
l_itm_bran_qa.quantity_avail := l_bra_qa.qual_avail;
l_itm_bran_qa.add_it;
commit;
end;
else
l_itm_bran_qa := t_f41021_itm_bran_qa.initialize(p_liitm);
if l_itm_bran_qa.quantity_avail = l_bra_qa.qual_avail then
null; return;
else
begin
l_itm_bran_qa.liitm := p_liitm;
l_itm_bran_qa.limcu := p_limcu;
l_itm_bran_qa.quantity_avail := l_bra_qa.qual_avail;
l_itm_bran_qa.send_to_DB;
commit;
end;
end if;
end if;
end;Thanks,
I comment it out cos it was causing the problem this is the code:
The following error has occurred:
ORA-04091: table PREPRODDTA.F41021 is mutating, trigger/function may not see it
ORA-06512: at "AOLALERE.CHK_FOR_POST", line 7
ORA-06512: at "AOLALERE.CHK_FOR_POST", line 20
ORA-06512: at "AOLALERE.PREPRODDTA_F41021_AFTER_UPDATE", line 98
ORA-04088: error during execution of trigger 'AOLALERE.PREPRODDTA_F41021_AFTER_UPDATE'
TRIGGER preproddta_f41021_after_update
after insert or update
on preproddta.f41021
for each row
declare
--nothing to declare
--pragma autonomous_transaction;
l_lipqoh preproddta.f41021.lipqoh%type;
l_lipcom preproddta.f41021.lipcom%type;
l_lihcom preproddta.f41021.lihcom%type;
l_lilots preproddta.f41021.lilots%type;
l_lilocn preproddta.f41021.lilots%type;
l_lilotn preproddta.f41021.lilots%type;
l_quantity_avail f41021_audit.quantity_avail%type;
l_rec_chk f41021_audit.liitm%type;
begin
--if :old.limcu <> ' GBD001' then return; end if;
if :old.lipqoh = :new.lipqoh then
l_lipqoh := :old.lipqoh;
else
l_lipqoh := :new.lipqoh;
end if;
if :old.lipcom = :new.lipcom then
l_lipcom := :old.lipcom;
else
l_lipcom := :new.lipcom;
end if;
if :old.lihcom = :new.lihcom then
l_lihcom := :old.lihcom;
else
l_lihcom := :new.lihcom;
end if;
if :old.lilots = :new.lilots then
l_lilots := :old.lilots;
else
l_lilots := :new.lilots;
end if;
if l_lilots <> ' ' then
l_quantity_avail := - (l_lipcom - l_lihcom);
else
l_quantity_avail := l_lipqoh - (l_lipcom + l_lihcom);
end if;
l_rec_chk := rec_chk(:old.limcu,:old.liitm,l_lilots);
if l_rec_chk is not null then
begin
update f41021_audit
set lipqoh = l_lipqoh,
lipcom = l_lipcom,
lihcom = l_lihcom,
quantity_avail = l_quantity_avail
where limcu = :old.limcu
and liitm = :old.liitm
and lilotn = :old.lilotn
and lilocn = :old.lilocn
and lilots = l_lilots;
end;
else
-- insert record into audit table
begin
insert into f41021_audit
(limcu,
liitm,
lipqoh,
lipcom,
lihcom,
lilots,
lilotn,
lilocn,
quantity_avail)
values
(:old.limcu,
:old.liitm,
l_lipqoh,
l_lipcom,
l_lihcom,
l_lilots,
:old.lilotn,
:old.lilocn,
l_quantity_avail);
end;
end if;
chk_for_post(:new.limcu,:new.liitm);
return;
end;
create or replace procedure chk_for_post(p_limcu in varchar2,
p_liitm in number)
is
cursor get_bra_qa(p_limcu in varchar2,
p_liitm in number)is
select liitm,
(sum(lipqoh) - sum(lipcom + lihcom)) qual_avail
from preproddta.f41021 a, preproddta.f4101 b
where limcu = p_limcu
and liitm = imitm
and liitm = p_liitm
group by liitm,imdsc1;
l_bra_qa get_bra_qa%rowtype;
l_itm_bran_qa t_f41021_itm_bran_qa := t_f41021_itm_bran_qa.initialize(p_liitm);
begin
open get_bra_qa(p_limcu,p_liitm);
fetch get_bra_qa into l_bra_qa;
close get_bra_qa;
if l_itm_bran_qa.quantity_avail is null then ---This indicate that there is no record for
---quantity available for the item based on the branch .
l_itm_bran_qa := new t_f41021_itm_bran_qa(p_liitm);
begin
l_itm_bran_qa.liitm := p_liitm;
l_itm_bran_qa.limcu := p_limcu;
l_itm_bran_qa.quantity_avail := l_bra_qa.qual_avail;
l_itm_bran_qa.add_it;
commit;
end;
else
l_itm_bran_qa := t_f41021_itm_bran_qa.initialize(p_liitm);
if l_itm_bran_qa.quantity_avail = l_bra_qa.qual_avail then
null; return;
else
begin
l_itm_bran_qa.liitm := p_liitm;
l_itm_bran_qa.limcu := p_limcu;
l_itm_bran_qa.quantity_avail := l_bra_qa.qual_avail;
l_itm_bran_qa.send_to_DB;
commit;
end;
end if;
end if;
end;
Please sugesst any work around. I need to call calculate changes based on the insert or updates -
Rgding ORA-04091:table PURCHSE_DTL is mutating,trigger/function maynot c it
I wrote a trigger 'TRG_PURCHASE_DTL' to update the stock table 'BRANCH_ITEM_STOCK' based on the DML actions perfomed on tables PURCHASE_DTL and ISSUE_DTL, but I am getting following error:-
ORA-04091: table PURCHASE_DTL is mutating, trigger/function may not see it
and the value of 'BRANCH_ITEM_STOCK.purchase_qty' is updated to 10 instead of 18.
The table structure and data is given below:
-- ============================================================
-- Table: BRANCH_ITEM_STOCK
-- ============================================================
create table BRANCH_ITEM_STOCK
BRANCH_CODE NUMBER(6) not null,
ITEM_CODE NUMBER(6) not null,
PURCHASE_QTY NUMBER(6) null ,
RECEIPT_QTY NUMBER(6) null ,
ISSUE_QTY NUMBER(6) null ,
BALANCE_QTY NUMBER(6) null ,
REMARKS VARCHAR2(100) null ,
constraint PK_RA25_BRANCH_ITEM_STOCK primary key (BRANCH_CODE, ITEM_CODE)
-- ============================================================
-- Table: PURCHASE_MST
-- ============================================================
create table PURCHASE_MST
BRANCH_CODE NUMBER(6) not null,
PURCHASE_YR NUMBER(6) not null,
PURCHASE_NO NUMBER(6) not null,
PURCHASE_DT DATE not null,
QUOTATION_NO NUMBER(6) not null,
QUOTATION_YR NUMBER(4) not null,
VENDOR_CODE NUMBER(6) not null,
RECEIPT_NO VARCHAR2(25) null ,
constraint PK_PURCHASE_HDR primary key (BRANCH_CODE, PURCHASE_YR, PURCHASE_NO)
-- ============================================================
-- Table: PURCHASE_DTL
-- ============================================================
create table PURCHASE_DTL
BRANCH_CODE NUMBER(6) not null,
PURCHASE_YR NUMBER(6) not null,
PURCHASE_NO NUMBER(6) not null,
REC_SNO NUMBER(6) not null,
ITEM_CODE NUMBER(6) not null,
ITEM_QTY NUMBER(6) not null,
ITEM_PRICE NUMBER not null,
ITEM_AMT NUMBER not null,
constraint PK_PURCHASE_DTL primary key (BRANCH_CODE, PURCHASE_YR, PURCHASE_NO, REC_SNO)
-- ============================================================
-- Table: ISSUE_MST
-- ============================================================
create table ISSUE_HDR
BRANCH_CODE NUMBER(6) not null,/* Issued from Branch*/
ISSUE_YR NUMBER(6) not null,
ISSUE_NO NUMBER(6) not null,
ISSUE_DT DATE not null,
ISSUED_BY VARCHAR2(15) not null,
ISSUED_TO_BRANCH VARCHAR2(15) not null,
ISSUE_STATUS NUMBER(6) null,
constraint PK_ISSUE_HDR primary key (BRANCH_CODE, ISSUE_YR, ISSUE_NO)
-- ============================================================
-- Table: ISSUE_DTL
-- ============================================================
create table ISSUE_DTL
BRANCH_CODE NUMBER(6) not null,
ISSUE_YR NUMBER(6) not null,
ISSUE_NO NUMBER(6) not null,
REC_SNO VARCHAR2(25) not null,
ITEM_CODE NUMBER(6) not null,
ITEM_DTL VARCHAR2(400) null ,
ITEM_QTY NUMBER(6) null ,
RECEIPT_QTY NUMBER(6) null ,
constraint PK_RA25_ISSUE_DTL primary key (BRANCH_CODE, ISSUE_YR, ISSUE_NO, REC_SNO)
Assume that the Contents of PURCHASE_MST is as follows:
SELECT branch_code, purchase_yr, purchase_no FROM PURCHASE_HDR;
BRANCH_CODE PURCHASE_YR PURCHASE_NO
100 2008 1
100 2009 1
100 2009 2
Now I tried to insert follwing values to the PURCHASE_DTL table:
insert into purchase_dtl (BRANCH_CODE,PURCHASE_YR,PURCHASE_NO,rec_sno,
ITEM_CODE,item_QTY)
Values (100,2008,1,1,4,5)
insert into purchase_dtl (BRANCH_CODE,PURCHASE_YR,PURCHASE_NO,rec_sno,
ITEM_CODE,item_QTY)
Values (100,2009,1,1,4,2)
insert into purchase_dtl (BRANCH_CODE,PURCHASE_YR,PURCHASE_NO,rec_sno,
ITEM_CODE,item_QTY)
Values (100,2009,2,1,4,6)
commit
Now Contents of table ' PURCHASE_DTL ' is as follows:
BRANCH_CODE PURCHASE_YR PURCHASE_NO REC_SNO ITEM_CODE ITEM_QTY
100 2008 1 1 4 5
100 2009 1 1 4 2
100 2009 2 1 4 6
I want to write a trigger which will insert/update/delete data into/from BRANCH_ITEM_STOCK,
so that the contents of column Purchase_qty of table BRANCH_ITEM_STOCK should be as follows:
BRANCH_CODE ITEM_CODE PURCHASE_QTY RECEIPT_QTY ISSUE_QTY BALANCE_QTY
100 4 13 0 0 13
[Note: i.e BRANCH_ITEM_STOCK.PURCHASE_QTY = SUM(PURCHASE_DTL.item_qty)
where PURCHASE_DTL.branch_code=100
AND PURCHASE_DTL.item_code=4
Now run the following update statement.
update purchase_dtl
set item_qty= 10
where BRANCH_code=100
and purchase_yr in ( 2008) and purchase_no =1 and rec_sno = 1 AND item_code = 4
commit
Now the actual contents of column Purchase_qty of table BRANCH_ITEM_STOCK should be updated as follows:
BRANCH_CODE ITEM_CODE PURCHASE_QTY RECEIPT_QTY ISSUE_QTY BALANCE_QTY
100 4 18 0 0 18
But I am facing problem here. I am getting following error:-
ORA-04091: table PURCHASE_DTL is mutating, trigger/function may not see it
and the value of purchase qty is updated to 10 instead of 18
Similarly if any issue of items happen (for eg:- issue_qty=2 to branch_code 200), then the purchase_qty =18,issue_qty=2 , balance_qty:=18-2=16 .
So for branch_code 200 , receipt_qty = 2.
Pls help me how to achieve the above .
Source code which I tried is given below : (but confused at the end )..please help
CREATE OR REPLACE TRIGGER trg_purchase_dtl
BEFORE INSERT ON PURCHASE_DTL
for each row
declare
-- local variables here
l_qty number(6);
l_cnt NUMBER;
BEGIN
BEGIN
SELECT COUNT(*) into l_cnt
FROM BRANCH_item_stock b
WHERE b.BRANCH_code = :new.BRANCH_code
AND b.item_code = :new.item_code ;
dbms_output.put_line('1.after selet cnt= '||l_cnt);
EXCEPTION when no_data_found then
l_cnt := 0;
dbms_output.put_line('2.in expt NDF selet cnt= '||l_cnt);
null;
END;
IF INSERTING THEN
dbms_output.put_line('3.before if ...going to insert ');
IF l_cnt = 0 THEN
dbms_output.put_line('hihhiii.......lcnt=0...item_code='||:old.item_code||'~l_qty='||l_qty);
IF INSERTING THEN
INSERT INTO BRANCH_ITEM_STOCK
(BRANCH_code,Item_Code, PURCHASE_QTY,RECEIPT_QTY, issue_qty, balance_qty)
VALUES(:NEW.BRANCH_code,:NEW.Item_Code, :NEW.ITEM_QTY,0, 0, 0);
END IF;
ELSIF l_cnt >0 THEN
SELECT purchase_qty into l_qty
FROM BRANCH_Item_Stock
WHERE BRANCH_code = :new.BRANCH_code
AND item_code = :new.item_code ;
l_qty := l_qty + :NEW.ITEM_QTY;
dbms_output.put_line('6.after selet qty= '||l_qty ||'~new qty='||:NEW.ITEM_QTY||'~old qty='||:OLD.ITEM_QTY);
dbms_output.put_line('7.before update '||l_qty);
-- IF INSERTING OR UPDATING THEN
UPDATE BRANCH_ITEM_STOCK
SET PURCHASE_QTY = l_qty
WHERE BRANCH_code = :new.BRANCH_code
AND item_code = :new.item_code ;
dbms_output.put_line('8.after update= '||l_qty);
--END IF;
END IF;
END IF; -- end of INSERTING
-- END;
--EXCEPTION WHEN DUP_VAL_ON_INDEX THEN
IF UPDATING THEN
dbms_output.put_line('9.if UPDATING...qty= '||l_qty ||'~new qty='||:NEW.ITEM_QTY||'~old qty='||:OLD.ITEM_QTY);
BEGIN
dbms_output.put_line('~old unotcode='||:old.BRANCH_code||'~old.item_code='||:OLD.ITEM_CODE||'~old itemqty='||:old.item_qty);
dbms_output.put_line('~new unotcode='||:new.BRANCH_code||'~new.item_code='||:new.ITEM_CODE||'~new itemqty='||:new.item_qty);
SELECT NVL(SUM(item_qty), 0) into l_qty
FROM Ra25_Purchase_Dtl
WHERE BRANCH_code IN ( :old.BRANCH_code )
AND item_code in ( :old.item_code)
AND item_qty <> :old.item_code ;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('10.in EWO'||sqlerrm);
END;
--l_qty := l_qty + :NEW.ITEM_QTY;
dbms_output.put_line('11.after selet qty= '||l_qty ||'~new qty='||:NEW.ITEM_QTY||'~old qty='||:OLD.ITEM_QTY);
UPDATE BRANCH_ITEM_STOCK
SET PURCHASE_QTY = l_qty --:new.item_qty
WHERE BRANCH_code = :old.BRANCH_code
AND item_code = :old.item_code ;
dbms_output.put_line('13.after update ');
END IF;
IF DELETING THEN
DELETE FROM BRANCH_ITEM_STOCK
WHERE BRANCH_CODE = :OLD.BRANCH_code
AND ITEM_CODe = :OLD.item_code;
END IF;
end trg_purchase_dtl;
Please help me how to resolve this problem asap.
-------------------------------------------------------------------------------------------------------------------------------------------------Hi,
Welcome to the forum!
See this thread [Avoiding Mutating Tables|http://asktom.oracle.com/tkyte/Mutate/index.html]
Tip: to preserve formatted code enclose it between {noformat}{noformat} tags (start and end tags are the same) :)
Thank you for posting DDL and DML of basic data, all people that post should follow this approach.
Regards, -
ORA-04091: table AM is mutating, trigger/function may not see it
I create this trigger:
CREATE OR REPLACE TRIGGER pr_test
after insert ON AM
FOR EACH ROW
declare
appo_pr varchar2(64):= null;
BEGIN
select name
into appo_pr
from AS
where AS_ID=:new.AS_ID;
insert into AM (name) values (appo_pr);
END pr_test;
I insert before a new AS_ID and name in tab AS but when I insert a new record in tab AM I get this error:
ORA-04091: table AM is mutating, trigger/function may not see it
ORA-06512: at PR_TEST", line 11
ORA-04088: error during execution of trigger PR_TEST'
I'd like to create a trigger that when I insert a new record in AM It verify the value in col name of AS and insert this value in col name of AM.
What I wrong in this trigger??
How can I modify it??
Thanks
RafTry this:
CREATE OR REPLACE TRIGGER pr_test
before insert ON AM
FOR EACH ROW
declare
appo_pr AS.name%TYPE;
BEGIN
select name
into appo_pr
from AS
where AS_ID = :new.AS_ID;
:new.name = appo_pr;
END pr_test; -
ORA-04091: table is mutating, trigger/function may not see
Hello All,
I am not an expert in oracle and I have been facing a problem where I get a message as follows :
ORA-04091: table <table> is mutating, trigger/function may not see it
I have a table tab1 which has ID, name, and some other columns. the rows in this table form a parent-child type relationship based on some columns within that table. I have created another table called relationship table. The relationship table has 2 columns ID and parentID. I keep this table up to date using triggers. For example if a new record is inserted or upadted in tab1 which affects the parent - child relationship, i update the relationship table accordingly using an insert / update trigger and it works fine.
I created another trigger as follows
create or replace trigger MY_DELETE_TRIGGER
after delete on tab1
for each row
BEGIN
update relationships a set a.parentID = null where a.parentID = :OLD.ID;
delete from relationships a where a.id = :OLD.ID;
END MY_DELETE_TRIGGER;
Basically what I am doing is, the record once deleted, if it was parent of anybody else, i am setting the parent as null and the record itself, if it was in the relationships as a child, I am removing that row.
This is when I get the table is mutating error, and I don't know how to fix it.
Can anybody please help me,
Thanks in advanceCould you provide more details?
SQL> select * from tab1;
ID NAME
1 test1
2 test2
SQL> select * from relationships;
ID PARENTID
1 1
2 1
SQL> create or replace trigger MY_DELETE_TRIGGER
2 after delete on tab1
3 for each row
4 BEGIN
5 update relationships a set a.parentID = null where a.parentID = :OLD.ID;
6 delete from relationships a where a.id = :OLD.ID;
7 END MY_DELETE_TRIGGER;
8 /
Trigger created.
SQL> delete from tab1
2 where id = 1;
1 row deleted.
SQL> select * from relationships;
ID PARENTID
2
SQL> rollback;
Rollback complete.
SQL> insert into relationships values(1,1);
1 row created.
SQL> select * from relationships;
ID PARENTID
1 1
2 1
1 1
SQL> delete from tab1
2 where id = 1;
1 row deleted.
SQL> select * from relationships;
ID PARENTID
2
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.3.0 - Production -
ORA-04091: table is mutating, trigger/function
I am using oracle 11g R2 - 11.2.0.1
I have following function to fetch the ID from name supplied
create or replace
FUNCTION get_group_id
(p_groupname IN group_list.groupname%TYPE)
RETURN group_list.group_id%TYPE
AS
v_group_id group_list.group_id%TYPE;
BEGIN
SELECT group_list.group_id
INTO v_group_id
FROM group_list
WHERE group_list.groupname = p_groupname;
RETURN v_group_id;
END get_group_id;
and I am doing simple update command to the table, but its giving me ORA-04091 error. Any help is appreciated
update GROUP_LIST set MGR_GROUP_ID = get_group_id('manager1') where group_id = get_group_id('employee51');
Error which I am getting is -
Error report:
SQL Error: ORA-04091: table is mutating, trigger/function may not see it
ORA-06512: at "GET_GROUP_ID", line 7
04091. 00000 - "table %s.%s is mutating, trigger/function may not see it"
*Cause: A trigger (or a user defined plsql function that is referenced in
this statement) attempted to look at (or modify) a table that was
in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.>
and I am doing simple update command to the table, but its giving me ORA-04091 error. Any help is appreciated
update GROUP_LIST set MGR_GROUP_ID = get_group_id('manager1') where group_id = get_group_id('employee51');
Error which I am getting is -
Error report:
SQL Error: ORA-04091: table is mutating, trigger/function may not see it
>
And do you have a trigger on the GROUP_LIST table that calls you function that queries the GROUP_LIST table?
The solution is simple: DON'T DO THAT!
See Trigger Restrictions on Mutating Tables in the SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/triggers.htm#g1699708
Trigger Restrictions on Mutating Tables
A mutating table is a table that is being modified by an UPDATE, DELETE, or INSERT statement, or a table that might be updated by the effects of a DELETE CASCADE constraint.
The session that issued the triggering statement cannot query or modify a mutating table. This restriction prevents a trigger from seeing an inconsistent set of data.
This restriction applies to all triggers that use the FOR EACH ROW clause. Views being modified in INSTEAD OF triggers are not considered mutating.
When a trigger encounters a mutating table, a run-time error occurs, the effects of the trigger body and triggering statement are rolled back, and control is returned to the user or application. (You can use compound triggers to avoid the mutating-table error. For more information, see Using Compound Triggers to Avoid Mutating-Table Error.)
Consider the following trigger:
CREATE OR REPLACE TRIGGER Emp_count
. . .
Maybe you are looking for
-
I do not have NI-IMAQ or NI Vision. I acquired the image using a picolo board then just saved it as a bitmap file.
-
How do I change the location of my songs?
I've done this in the past, and its worked. But this time, using iTunes 10, it didn't. Has something changed? I had almost 1000 songs on an external drive. Got a new mac with plenty of local disc space, so I copied all the files over to my Music/iTun
-
How to send mail with SSL in ADDT?
The control panel of ADDT for email settings doesn't have option for ssl enable. Please help me, thanks PS: One question had posted at http://forums.adobe.com/thread/284636?tstart=210
-
1st Mac purchase: 13" i5 w Extra Ram or 13" i7?
So after years of getting by in PC land, all the while loving life with an iPod & then iPhone, I've decided to make the plunge & get myself a Macbook Pro, as my 6 year old Dell laptop is, well, struggling to say the least. I've decided on the 13" ran
-
Flash Animation Workshop Hello my Adobe friends! If there's anybody in learning how to ANIMATE using FLASH... check out this inexpensive two day workshop led by top David Wolfe of Animax Entertainment and Warren Fuller of Animonger.com. Flash Charact