Getting problem while installing Sql Server 2012
I am using Windows 8 in my system. I am trying to install Sql Server 2012 in my system .
But i am getting following error in the final.
The required MSI package 'D:\SQL Server 2012\x86\setup\sql_engine_core_shared_msi' doesn't exist.
Please, help me quickly.
Hi，
You post same question 3 times. Please avoid this practice on Forum, I
have merged the same thread into this thread . Thanks for your understanding.
In addition, as other post, you can copy the missing .msi file from the complete and unbroken installation media to your MSI package path. Then run as administrator again. And also check if your account has read and write permission for your installation
media saving path. If the error still exists, you can check the SQL setup logs (Detail.txt and summary.txt) for analysis.
There is similar issue about installing SQL Server failed due to miss the required MSI package.
http://social.msdn.microsoft.com/Forums/en-US/2aa6136b-9ccd-4c97-a6d3-cbe408c38228/sql-server-2008-service-pack-1-installation-problem
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support
Similar Messages
-
Error while installing SQL Server 2012 X64 SP2,
Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
JamalHello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How to hide product key page while installing SQL server 2012 ?
I need to hide the product key page while installing SQL server 2012 enterprise edition
I was trying to use the following command
Setup.exe /ACTION=Install /FEATURES=SQL /INSTANCENAME=Intuition /PID=<My product Key.
/IACCEPTSQLSERVERLICENSETERMS
The product key was applied , but the install screen is being shown with the Product key i have provided and it is in editable mode.
Is there any way i can hide this SQL server product key page ?
The reason is we are including SQL setup in our application and as per Microsoft policy we should not reveal the product key to user. If we are able to hide this from installing page , we can hide the installation command in some exe.
Note : Customers need fulfledged versions so we can't install SQLExpress.Hello,
Could you try using /Q or /QS parameter?
http://msdn.microsoft.com/en-us/library/ms144259(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit
Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crtHi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Errro while installing sql server 2012 express edition on Windows 8 -64 version
Hi,
Im trying to install sql server 2012 express edition on windows 8 machine(64 bit),however im getting same error every time.
The following error has occurred:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337
i've googled and checked all prerequisite which is already installed.so not finding the reason behind this error.
it would be great if any one can help on resolving this error.
Thanks in advance
Regards
RiteshHi ,
Thanks for help. here is the log summary text
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068051679
Start time: 2014-02-05 12:30:44
End time: 2014-02-05 12:36:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: IDEA-PC
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Basic 1033 Developer Edition
10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Complete 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Backwards Compatibility 1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Client Tools SDK 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Integration Services 1033 Developer Edition
10.50.1600.1 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\b33170cf028067db5b8335d2\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLFASHION
INSTANCENAME: SQLFASHION
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQL$SQLFASHION
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: idea-pc\lenovo
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\SystemConfigurationCheck_Report.htm -
NetFx3 error while installing SQL Server 2012 on windows 8 Pro
I can't install SQL Server 2012 on my windows 8 Pro, every time I try I get this error: Error while trying to enable NetFx3
Can anyone help, please.Hi,
Windows 8 does not include .NET 3.5 (include .NET 2.0 and 3.0) by default.
1. We can make sure this feature is enabled by check in Program and Features.
a. Go to Settings. Choose Control Panel then choose Programs.
b. Click Turn Windows features on or off, and the user will see Windows feature window.
c. You can enable this feature by click on .NET Framework 3.5 (include .NET 2.0 and 3.0) select it and click OK. After this step, it will download the entire package from internet and install the .NET Framework 3.5 feature.
This option requires an Internet connection.
2. As Alberto suggested, you can use the command to enable .NET Framework 3.5 (include .NET 2.0 and 3.0) feature in offline mode to avoid interruption before run SQL Server Setup.
For your information:
Installing the .NET Framework 3.5 on Windows 8 or 8.1
http://msdn.microsoft.com/en-us/library/hh506443(v=vs.110).aspx
Thanks.
Tracy Cai
TechNet Community Support -
Error while installing SQL Server 2012 Express Edition
Dear Experts,
My system configuration is,
Windows 7 Ultimate
32 bit
RAM 8 GB
I7 Processor
I am trying to installed Sql serve 2012 with tools version but not able to install.
Its giving me error Like Value can not be null..
I search every thing on google but not helps me.
Please assist.
Thanks,Hello,
Try .NET Framework repair tool.
https://support.microsoft.com/kb/2698555?wa=wsignin1.0
Another possible solution can be found on the following URL.
http://sqlserver-help.com/2012/07/23/help-getting-error-value-cannot-be-null-while-opening-management-studio-which-value/
Please share with us the Summary.txt log file. Th following article may help you locate the file on disk.
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Make sure you have enabled .NET Framework 3.5 using Control Panel -> Programs and Features.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error While Installing SQL SERVER 2012 on Windows Serrver 2012 R2
I encounter the following errors while installing SQL SERVER on Windows SERVER 2012 R2, can anybody help me out?
dotdazzleIf you are using any system account then password is not needed. From the screenshot I see NT Authority\.... so you don't need password.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Getting error while expanding SQL Server 2012 agent.
Hi All,
Server Version Details: Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using SQL Server 2012 in Active/Passive Cluster and the problem is getting below error while expanding SQL Agent. Please share you views on this. Thank You.
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
A severe error occurred on the current command. The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
BUTTONS:
OK
Regards,
Kalyan
----Learners Curiosity Never Ends----Hi OHM SAI RAM,
I’m writing to follow up with you on this post. Was the problem resolved after checking the error message and performing the action plan steps? I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings or
concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Master Data Services not available under shared feature while installing SQL server 2012
Hi,
I am trying to install Master Data Services but do not see the option to select MDS under the shared features when going through the SQL server 2012 installation. I have the SQL server 2012 SP1 (64 bit) install files. I have also installed SP2. I havent
found anything online about the issue.
Can someone please advise?
I have a screenshot of the installation screen which I will attach as soon as I am able to get my account verified. Thanks!Hi Revees,
This might be a very naïve and also out of the original scope of the thread question.
We are thinking of going with the developer edition. We have 2/3 developers and some other testers and business users.
1) I understand that we need a developer license for each developer. But would we need a license for the business user. Can they have a sort of read access to the dbs?
2) If a developer has MSDN subscription, Would they need to purchase the license too assuming we purchase the developer edition of the software (and not download it using the MSDN subscription)?
Thanks for your assistance! -
Error while install sql server 2012 using powershell
hello all,
I am using below function to install sql server and its not working can some one help me please
Function Install-Sql2012
param
[Parameter()][string] $Path ,#= (read-host "Enter Installation Binary Path"),
[Parameter()][string] $AddSSIS= (read-host "Do u need SSIS Enter 1 for yes o for no") ,
[Parameter()][string] $AddSSRS= (read-host "Do u need SSRS Enter 1 for yes o for no") ,
[Parameter()][string] $InstanceName = (read-host "Enter Instance name"),
[Parameter()][string] $ServiceAccount= (read-host "Enter Service Account"),
[Parameter()][string] $ServicePassword= (read-host -assecurestring "Enter Service Account Password") ,
[Parameter()][string] $AgentAccount=(read-host "Enter Agent Account"),
[Parameter()][string] $AgentPassword=(read-host "Enter Agent pasword"),
[Parameter()][string] $Backuppath= (read-host "Enter Backuppath"),
[Parameter()][string] $SaPassword= (read-host -assecurestring "Enter SA Account Passowrd"),
[Parameter()][string] $SQLTEMPDBDIR= (read-host "Enter TempDir"),
[Parameter()][string] $SQLUSERDBDIR= (read-host "Enter User Data Directory"),
[Parameter()][string] $SQLUSERDBLOGDIR= (read-host "Enter User Log Directory"),
#[Parameter(Position=5,Mandatory=$false)][string] $LicenseKey,
[Parameter()][string] $SqlCollation = "SQL_Latin1_General_CP1_CI_AS",
[Parameter()][switch] $NoTcp,
[Parameter()][switch] $NoNamedPipes
#Build the setup command using the install mode
if ($Path -eq $null -or $Path -eq "")
#No path means that the setup is in the same folder
$command = '.\setup.exe /Action="Install"'
else
#Ensure that the path ends with a backslash
if(!$Path.EndsWith("\"))
$Path += "\"
$command = $path + 'setup.exe /Action="Install"'
#Accept the license agreement - required for command line installs
$command += ' /IACCEPTSQLSERVERLICENSETERMS'
#Use the QuietSimple mode (progress bar, but not interactive)
$command += ' /QS'
#Set the features to be installed
#$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS'
If ($AddSSIS -ne '0' -and $AddSSIS -ne '1') {
throw 'Invalid input. Enter a valid value for SSIS.'
If ($AddSSRS -ne '0' -and $AddSSRS -ne '1') {
throw 'Invalid input. Enter a valid value for SSRS.'
if ($AddSSIS -eq 1 -and $AddSSRS -eq 1)
$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSIS,SSRS'
if ($AddSSIS -eq 1 -and $AddSSRS -eq 0)
$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSIS'
if ($AddSSIS -eq 0 -and $AddSSRS -eq 1)
$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSRS'
if ($AddSSIS -eq 0 -and $AddSSRS -eq 0)
$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS'
#Set the Instance Name
$command += (' /INSTANCENAME="{0}"' -f $InstanceName)
#remove Set the License Key only if a value was provided, otherwise install Evaluation edition
#if ($LicenseKey -ne $null -and $LicenseKey -ne "")
# $command += (' /PID="{0}"' -f $LicenseKey)
#set reporting to off
$command += ('/SQMREPORTING="0"')
#Add Browser Account
$command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
#Check to see if a service account was specified
if ($ServiceAccount -ne $null -and $ServiceAccount -ne "")
#Set the database engine service account
$command += (' /SQLSVCACCOUNT="{0}" /SQLSVCPASSWORD="{1}" /SQLSVCSTARTUPTYPE="Automatic"' -f $ServiceAccount, $ServicePassword)
#Set the SQL Agent service account
$command += (' /AGTSVCACCOUNT="{0}" /AGTSVCPASSWORD="{1}" /AGTSVCSTARTUPTYPE="Automatic"' -f $AgentAccount, $AgentPassword)
else
#Set the database engine service account to Local System
$command += ' /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /SQLSVCSTARTUPTYPE="Automatic"'
#Set the SQL Agent service account to Local System
$command += ' /AGTSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCSTARTUPTYPE="Automatic"'
#Set the server in SQL authentication mode if an SA password was provided
if ($SaPassword -ne $null -and $SaPassword -ne "")
$command += (' /SECURITYMODE="SQL" /SAPWD="{0}"' -f $SaPassword)
#Add current user as SysAdmin
$command += (' /SQLSYSADMINACCOUNTS="test\ADMIN"')
#Add Tempdbdata path
$command += (' /SQLTEMPDBDIR="{0}"' -f $SQLTEMPDBDIR)
#Add Tempdblog path
$command += (' /SQLTEMPDBLOGDIR="{0}"' -f $SQLTEMPDBDIR)
#Add UserDBdata path
$command += (' /SQLUSERDBDIR="{0}"' -f $SQLUSERDBDIR)
#Add UserDBlog path
$command += (' /SQLUSERDBLOGDIR="{0}"' -f $SQLUSERDBLOGDIR)
#Set the database collation
$command += (' /SQLCOLLATION="{0}"' -f $SqlCollation)
#Enable/Disable the TCP Protocol
if ($NoTcp)
$command += ' /TCPENABLED="0"'
else
$command += ' /TCPENABLED="1"'
#Enable/Disable the Named Pipes Protocol
if ($NoNamedPipes)
$command += ' /NPENABLED="0"'
else
$command += ' /NPENABLED="1"'
if ($PSBoundParameters['Debug'])
Write-Output $command
else
Invoke-Expression $command
Install-Sql2012
Below is the error i am getting
PS C:\temp\in> .\Install-Sql2012.ps1
Do u need SSIS Enter 1 for yes o for no: 0
Do u need SSRS Enter 1 for yes o for no: 0
Enter Instance name: MSSQLSERVER
Enter Service Account:
Enter Service Account Password:
Enter Agent Account:
Enter Agent pasword:
Enter Backuppath: "C:\Temp\IN\bck"
Enter SA Account Passowrd: **********
Enter TempDir: "C:\Temp\IN\bck"
Enter User Data Directory: "C:\Temp\IN\bck"
Enter User Log Directory: "C:\Temp\IN\bck"
Microsoft (R) SQL Server 2012 11.00.2100.60
Copyright (c) Microsoft Corporation. All rights reserved.
The following error occurred:
Instance name is limited to 16 characters. Yours 'MSSQLSERVER/SQMREPORTING=0/BROWSERSVCSTARTUPTYPE=DISABLED/SQLBACKUPDIR=C:\TEMP\IN\BCK' is 85.
Error result: -2054422513
Result facility code: 1420
Result error code: 15
Please review the summary.txt log for further details
Thanks,
Ashwin.
Line 94, 97 and 100 appear to not have spaces at the beginning of each string, which could cause some issues:
#set reporting to off
$command += ('/SQMREPORTING="0"')
#Add Browser Account
$command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
Probably should be this:
#set reporting to off
$command += (' /SQMREPORTING="0"')
#Add Browser Account
$command +=(' /BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=(' /SQLBACKUPDIR="{0}"' -f $backuppath)
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
Error While installing SQL SERVER 2012 Upgrade Advisor
Hi,
" An error occured during the installation of assembly 'Microsoft.VC80.CRT,type="win32",Version="8.0.50727.4053",publickeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"
Please refer to help and support for more information .HRESULT:0x80073715 "
Please helpSQL Server fails to install due to Microsoft Visual C++ 2005. Please check the below mentioned link:
https://support.microsoft.com/kb/2688946?wa=wsignin1.0
below link may be helpful to you its also..
Please download it with SP1 included from the following resources:
http://www.microsoft.com/en-us/download/details.aspx?id=18471 (x64)
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x85
or 32-bit) -
Unable to install SQL Server 2012 Developer
I have a problem with installing SQL Server 2012 (no matter which edition I choose). Installation usually runs well, but near the end shows up an error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
BUTTONS:
OK
The help link points to not-existing article on MSDN page. After I click OK button, the installation reaches it's end and shows up another, which tells, that Database Engine Services, Reporting Services - Native, Data Quality Services, Full-Text and Semantic
Extractions for Search and SQL Server Replication failed to install.
After that I am able to start, for example SQL Management Studio, but cannot connect to database. Also services of SQL Server (Server, Server Agent, Full-text Filter, Reporting Services) are stopped and I am not able to start them manually (any try throws an
error: "The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details").
I tried complete reinstalling of SQL Server, cleaning registry entries, different editions of that software - none method helped. Also, I tried the .iso images of installation media on other computers - it worked well and installed without any errors. My OS
is Windows 8.1 x64.Hello,
Please uninstall SQL server completely from add remove program.Make sure you uninstall it completely
Now right click on Setup.exe file which is there in SQL Server installable and select run as administrator to start installation.
On page where you are asked to provide startup account for SQL Server service select NT Authority\System or Local System account.
This issue is basically after installation SQL Server is not able to bring online database services using account which you selected .Local system account will allow it to come online
After installation change startup account to domain account with least privilege
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Problem Installing SQL Server 2012
Hello, I am currently trying to install SQL Server 2012 and I'm having a problem. When I try to install a "New SQL Server stand alone installation..." from the SQL Server Installation Center, it gives me the error:
An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version=8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchit
ecture="x86",type"win32". Please refer to Help and Support for more information. HRESULT:
0x80070422.
After clicking "OK" I get this error:
Windows Installer file: C:\Users\Mike\AppData\Local\Temp\SQL Server 2012
\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20131207_210515\SqlSupport_Cpu64_1_ComponentUpdate.log
After clicking "Retry" it loads for awhile and then shuts down and I get the "Setup Stopped Working" window. Does anyone know what the problem is? How can I finish installing the software? ThanksHello,
Please try to manually install VC++ 2005 SP1 from the following link.
http://www.microsoft.com/en-us/download/details.aspx?id=5638
The following resources may help you too:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/a508768d-9468-41e0-9159-b66b45c39043/microsoft-visual-c-2005-redistributable-error?forum=vssetup
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e?auth=1
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
I get only an error message: " XULRunner- Error: Platform version 1.9.2.13 is not compatible with minVersion >=1.9.2.14 maxVersion<=1.9.2.14 " My system: Windows XP I've tried the tips on the Firefox help pages.
-
How can I put my iMac intel core 2 duo in 64bit mode
I have an iMac model 7.1 that has an Intel core 2 duo so shouldn't I be able to make it run in 64 bit mode? How? I am in 10.6.8 and it locks too often to be used. I tried the Terminal sudo systemsetup -setkernalbootarchitecture x86_64 but the Ter
-
Can Photoshop Convert Selected File-types From a Folder Full of Files?
I have a folder with approximately 20,000 files in it. The files are a mix of eps, tif, jpg, and PSD files. I want to convert all the eps files to tifs. For now I've created a folder into which I move approximately 500 eps files at a time (that I man
-
Connecting a SATA disk to my iMac
I had my 250GB LaCie d2 SATA disk connected to my G3 using the Serial ATA PCI card which came with the disk.It worked fine. Recently I replaced the G3 by an iMac; it has no SATA connection and no room to add the Serial ATA PCI card. However, I also b
-
Problems html5 output smart interaction in Captivte 8
Hi community, I have a problem with Captivate 8 When I publish smart interaction like Word Search they run perfect in swf. But when I watch the html5 output most of the interactions are placed on the top left corner and not at the position where I wa