Getting prompted to Save As when using Save option

We would like to deploy Reader XI with Protected Mode enabled. We have noticed that when using the Save option the user receives a prompt to Save As instead. I understand this is a security feature to basically grant Reader/Acrobat permission to save to this location.
Issue is that we have in house software that opens the PDF using Reader allowing the user to make markups and then save, but if the user saves the file to a different location this will cause the in house software to fail. Older version of Reader with Protected Mode disabled allows just the save to be used and the original file location to be preserved.
Is there anyway to white list this Directory so that Reader can save to it without a Save As prompt?
Only fix I know of currently is to disable Protected Mode but we would like to avoid that if possible
Thanks

There is a notation in the documentation that may be relevant.
"Permissions granted by other features often overlap. For example, cross domain policies, internet access settings in Trust Manager, and certificate trust settings for certified documents sometimes interact so that the most permissive setting takes precedence. Users should TEST THEIR CONFIGURATION prior to deployment."
Have you checked the possible overlapping features?

Similar Messages

  • When I open Firefox (with Google as home page), I get prompted to save a file (application/octet-stream)

    This is my mother's computer. It's an HP Pro something. It has Win 7 Pro and Firefox is up to date. I'm not sure when this started because she doesn't use it every day. We can't get to Google at all using Firefox. I even tried a new tab just now and I get prompted to save a file (earlier the file it is prompting to save is NFRC_FLE13007-1A-RD_3300_SN_CIG_IS20_i89.pdf [the two dashes might be underscores - can't read my own writing!] Now it doesn't show me the file name). I tried using bing to search for this file name and didn't get any results.
    I already tried clearing the cache and also resetting the browser using CTRL-F5. I've rebooted after that too. No changes...
    I have not cleared cookies - I think she relies on a lot of them and I don't want to get her more confused!
    Also, I've set up a number of "shortcuts" on her desktop so she can go directly to some websites. One is for Yahoo, one is for WebMD, etc. When I click on these, I do not have the issue. Seems to be related only to Google. Okay, just tried Google Maps and the same thing happens... And same thing happens with GMail. I captured the window, see the attachments..
    Thanks!
    p.s. I occasionally (on my computer) get prompted to save a file in Firefox when I hit the back button. I just say cancel and then do it again and everything is fine. I don't know if this is related either. I have Win 8.1 on a Lenovo laptop.

    Try to boot the computer in [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe Mode with network support] (press F8 on the boot screen) open firefox and see if that happens again.

  • Why do I get prompted to subscribe online when I attempt to convert a PDF file to word

    Why do i get prompted to subscribe online when I attempt to convert a PDF file to word?  It's Adobe Pro XI.

    Open pdf document,  click tools,  click content editing,  click export file to (choose word).   Or open pdf document and choose save as.  Either way it prompts to subscribe.

  • I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

    I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

    I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

    Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
    Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
    I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

  • How do i get passed the billing step when using my apple id to download apps

    how do i get passed the billing step when using my apple id to download apps on my ipod touch

    DId you enter a valid payment method?

  • Flash crashing when using Command + Option + S for Scale and Rotate?

    Flash crashing when using Command + Option + S for Scale and Rotate?
    It's happening to me when I use those hotkeys
    Please let me know if it's happening to you too.
    I don't know the cause but I need a fix.
    I'm using Adobe FLASH cs6 for Mac
    My computer:
    Mac mini
    Mid 2011
    Software  OS X 10.8.1 (12B19)
    -Line

    With all due respect to your totally coindescending reply, this is a bug in Flash. Happens every 4-5 times I use that menu item. Been happening for months, but  we just installed a Brand new iMac (1/13). Quadcore 3.4 16G RAM and 1TB Fusion drive. Fresh install of CS6. Not running any other 3rd Party Software. Problem STILL happens in new Flash docs with small, simple vector Graphics.
    So instead of blaming the users computers, how about you guys just fix the effin' problem? Thanks.

  • Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

    When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time.  So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again. Since I upgraded to iOS6, I don't believe I am prompted for my password the same amount of times. I updated an app this am after not using iPad through the night and it just updated, no password required. This has me concerned now because sometimes I bump buttons by accident and now I will be charged for these accidents. What has happened to Apple's brilliant security?

    They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
    Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

  • Why being prompted for login/password when using OVDC, smart card,token/vdi

    Hello,
    I'm using VDI 3.2.1, OVDC, smart card and i assigned a smart card token to a desktop pool.
    Inserting the smart card triggers a new VDI desktop selector which prompts for the login and password.
    Is there any reason why VDI is prompting for the login/password in the VDI selector when using a smart card especially that the smart card token has been assigned to a desktop pool ?
    Thanks
    Thierry.

    You still have to authenticate to get a desktop. If you assigned a token to a pool, the ability to be assigned a desktop is based on the token not the user ID. That means that any user will be assigned a desktop if they use that card.

  • Cannot get hardware limits to work when using Lintech switches with a ACR9000 motion controller

    This has been my conversation with Parker Automation.
    From: Susan Connors <[email protected]>
    Date: April 21, 2015 at 8:52:55 AM CDT
    To: Bowlerdusty <[email protected]>
    Subject: Re: ACR 9000
    Hi Dustin,
    Since the product was not purchased from us, or through the Parker website, but through National Instruments, you would need to contact them and they should be able to help.
    Regards,
    Susan
    Susan Connors
    Customer Service Representative
    Cross Company - Automation Group
    Employee Owned Since 1979
    Direct Dial: 704-755-1048 Fax: 704-523-6500
    Toll Free: 1-800-866-4568 ext 5352
    On Mon, Apr 20, 2015 at 4:16 PM, Bowlerdusty <[email protected]> wrote:
    Hi again. Since last speaking, we have gotten the motor to move. The only thing we are struggling on now is getting the hardware limits to work. We are using switches provided by Lintech. One pair of switches is mechanical and the other pair are non-contact reed switches. I found out earlier that the product was purchased from National Instruments Co. Anyway we could receive some help with this?
    Thanks,
    Dustin Brown
    -----Original Message-----
    From: Susan Connors <[email protected]>
    To: Bowlerdusty <[email protected]>
    Sent: Tue, Feb 3, 2015 12:52 pm
    Subject: Re: ACR 9000
    Dustin,
    I am checking with our manager and engineers on this and will let you know.
    Regards,
    Susan
    Susan Connors
    Customer Service Representative
    Cross Company Automation Group - Employee Owned Since 1979
    Direct Dial: 704-755-1048 Fax: 704-523-6500
    [email protected]
    www.cross-automation.com
    Cross Automation Line Card
    We welcome your feedback on our customer support team. Please email my manager: [email protected]
    On Mon, Feb 2, 2015 at 3:10 PM, Bowlerdusty <[email protected]> wrote:
    Could it possibly be under some other name? There are other divisions it could possible be under. This place is also under the U.S. Army Corps of Engineers, so it might be under that name. And if this wasn't purchased from this company, then where was it purchased from? This is the company I was sent to when I contacted the Parker Motion support.
    -----Original Message-----
    From: Susan Connors <[email protected]>
    To: bowlerdusty <[email protected]>
    Sent: Fri, Jan 30, 2015 4:13 pm
    Subject: Fwd: ACR 9000
    Hello,
    We have checked and show no record of your company or this part being purchased from us, so this is not something that we can offer support.
    I do not know of an integrator in your area but you should contact a local one that could possibly help you trouble-shoot any questions you have on this unit.
    Regards,
    Susan
    Susan Connors
    Customer Service Representative
    Cross Company Automation Group - Employee Owned Since 1979
    Direct Dial: 704-755-1048 Fax: 704-523-6500
    [email protected]
    www.cross-automation.com
    Cross Automation Line Card
    We welcome your feedback on our customer support team. Please email my manager: [email protected]
    ---------- Forwarded message ----------
    From: Bowlerdusty <[email protected]>
    Date: Fri, Jan 30, 2015 at 3:59 PM
    Subject: Re: ACR 9000
    To: [email protected]
    Any idea of when I'll get a response?
    -----Original Message-----
    From: AG Sales Fax <[email protected]>
    To: bowlerdusty <[email protected]>
    Sent: Fri, Jan 30, 2015 11:03 am
    Subject: Fwd: ACR 9000
    -- Can you please advise Company name and location so I can forward to appropriate contact?
    ---------- Forwarded message ----------
    From: 'Bowlerdusty' via [email protected] <[email protected]>
    Date: Fri, Jan 30, 2015 at 10:32 AM
    Subject: ACR 9000
    To: [email protected]
    I was told to contact you guys for help with this. Can you be of some assistance?
    -----Original Message-----
    From: jhoagland <[email protected]>
    To: Bowlerdusty <[email protected]>
    Sent: Thu, Jan 29, 2015 3:44 pm
    Subject: Re: ACR9000
    There are free training videos on our website:
    http://www.parkermotion.com/products/Controllers__​6934__30_32_80_567_29.html
    This unit was purchased through Cross Automation.
    They are your local Parker ATC distributor and can give you assistance though the unit is out of warranty.
    Their phone number is: 704-523-2222
    Let me know if there’s any questions. Have a nice day.
    Regards,
    Jonathan
    -----Original Message-----
    From: Bowlerdusty < [email protected]>
    To: emn_applications < [email protected]>
    Sent: Thu, Jan 29, 2015 2:57 pm
    Subject: Fwd: ACR9000
    Here is a pic of the serial number and model number.
    -----Original Message-----
    From: emn_applications < [email protected]>
    To: Bowlerdusty < [email protected]>
    Sent: Thu, Jan 29, 2015 11:36 am
    Subject: Re: ACR9000
    On the other side of the ACR9000 is a label with the model number, SO and
    serial number. Please provide.
    Regards,
    Jonathan
    Application Engineering Team
    [email protected]
    phone 800-358-9070 · international 1-707-584-7558
    www.parkermotion.com
    Parker Hannifin Corporation · Electromechanical Automation, NA
    5500 Business Park Drive · Rohnert Park · CA · 94928
    Bowlerdusty <[email protected]>
    To
    [email protected]
    01/29/2015 09:19 AM
    cc
    Subject
    Re: ACR9000
    I honeslty don't know this information. This stuff was bought at least a
    few years ago. A student who is now gone had put it together a while back.
    There were a lot of binders with it for instructions but none of it was
    very clear to me. I'm sending pictures with the parts I have
    (controller,drive,motor,etc.).
    -----Original Message-----
    From: emn_applications <[email protected]>
    To: Dustin Brown <[email protected]>
    Sent: Wed, Jan 28, 2015 10:17 am
    Subject: Re: ACR9000
    OK. So now you'd program it using the Configuration Wizard in ACR-View and
    the program editor.
    Which Parker ATC distributor did you purchase this through?
    Regards,
    Jonathan
    Application Engineering Team
    [email protected]
    phone 800-358-9070 · international 1-707-584-7558
    www.parkermotion.com
    Parker Hannifin Corporation · Electromechanical Automation, NA
    5500 Business Park Drive · Rohnert Park · CA · 94928
    Dustin Brown <[email protected]>
    To
    [email protected]"
    01/28/2015 07:58 AM <
    [email protected]>
    cc
    Subject
    Re: ACR9000
    Hi thanks for the reply. We got it connected via Ethernet now. We had to
    change the IP address of "local area connection" on the computer to
    192.168.10.1 for it to see the controller. So now that it is connecting to
    the controller, it keeps saying that the drives are all disabled. I have
    one drive connected to the controller in the Axis 0 port.
    Sent from my iPhone
    On Jan 27, 2015, at 3:56 PM, [email protected] wrote:
    > Did you change your PC's IP address?
    >
    > VIDEO: How to set your PC's Ethernet IP address
    >
    http://www.parkermotion.com/dmxreadyv2/faqsmanager​/faqsmanager.asp?category=116&knowledgebase=faqman​...
    >
    >
    > Default is 192.168.10.40
    >
    > Is this a new ACR9000?
    > If you don't know the IP address and the default doesn't work, you'll
    need
    > to connect via USB or serial to get the IP address or reset it.
    >
    > Regards,
    >
    > Jonathan
    >
    > __________________________________________________​______________________
    > Application Engineering Team
    > [email protected]
    > phone 800-358-9070 · international 1-707-584-7558
    > www.parkermotion.com
    > Parker Hannifin Corporation · Electromechanical Automation, NA
    > 5500 Business Park Drive · Rohnert Park · CA · 94928
    >
    >
    >
    >
    >
    >
    >
    > Bowlerdusty <[email protected]>
    To
    >
    [email protected]
    > 01/27/2015 01:48 PM
    cc
    >
    >
    Subject
    > ACR9000
    >
    >
    >
    >
    >
    > I am having a little trouble getting a connection between the ACR view
    > software and the ACR 9000. I am attempting to use an ethernet cable for
    > the connection. Every time I press the "connect" button it says "Failed
    > attempting to connect to controller". Do you have any advice?
    >
    > Thanks,
    > Dustin Brown
    >
    >
    >
    >
    (See attached file: IMG_0864.JPG)(See attached file: IMG_0865.JPG)(See
    attached file: IMG_0866.JPG)(See attached file: IMG_0867.JPG)(See attached
    file: IMG_0868.JPG)(See attached file: IMG_0869.JPG)
    1 Attached Images
    Solved!
    Go to Solution.
    Attachments:
    image.jpg ‏938 KB
    image.jpg ‏1570 KB
    image.jpg ‏767 KB

    Hi thanks for the reply.  Yes I have used the ACR view to specify which inputs to use before.  I used input 0 for the positive limit, input 1 for the negative limit, and input 2 for the home switch.  However, when using ACR view the switch kept displaying that the switch had been tripped when nothing was pressing against it.  I would also try pressing on the mechanical switch to see at least if the value would change but to no avail.
    Attachments:
    image1.JPG ‏1642 KB
    image3 (1).JPG ‏3768 KB
    image2 (1).JPG ‏3247 KB

  • Crystal 2011 getting Logon failed IM004 error when using ODBC (RDO)

    I just installed Crystal Reports 2011 on Windows 7 Ultimate SP1.  Sporadically, but way too often (I would estimate about 60% of the time), when I go to set up an ODBC (RDO) connection or refresh an existing report and enter the password, I get the following error:
    Logon failed.
    Details: IM004:[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_Handle_ENV failed
    Other times, it just works, with no changed made.  It seems to work slightly more often when using the SQL Server driver (the one for SQL 2000) as opposed to the SQL Native Client or SQL Server Native Client 10.0 drivers.  But not often enough for that to be the solution.
    I have tested this with a locally installed SQL Server (on the same machine as Crystal Reports) and remote SQL Servers, with SQL 2000, 2005 and 2008.  Same results.
    I have Crystal Reports 2008 installed on the same machine and have not once had this problem.  I have tried using the same ODBC connections I already had from Crystal 2008 with Crystal 2011 and also to create new ones, same results either way.
    Is this a known issue, or is there a switch/setting I need to change to make this work consistently?  I am especially puzzled by the fact that it seems random, I have not been able to find any pattern at all.

    Hi Victoria,
    MS SQL Server 2008 has a client install now, the MDAC/WDAC doesn't install it as MS used to do with all of their OS's. CR also had to update the use of SQL Server 2008 to include the SQLNCLI10 client engine.
    I suggest, if you have not already, install the Native 10 client from either the SQL Server CD or you can download the MSI from MS's site and only use the Native 10 driver.
    MS kind of dropped ODBC and moved to OLE DB. The native client actually uses the OLE DB driver so using ODBC just puts another layer on top of OLE DB anyways. It's more convenient to use ODBC for deploying applications but it can affect performance.
    Anyways, as noted, CR 2011 is still in Ramp up mode so this issue may have been tracked. If not though you can purchase a support case, if it's a bug then you'll get a refund, if it's a limitation in MS then no refund.
    There is [SP 1 for CR 2011|https://smpdl.sap-ag.de/~sapidp/012002523100007683092011E/cr2011sp1.exe] - http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
    Seems to be a problem with that page right now so try again later... and apply SP 1 or wait until it goes GA and test again. If it's still an issue then you can log a case.
    Firefox just got updated and it's failing, IE works though...
    Thanks again
    Don
    Edited by: Don Williams on Jun 22, 2011 8:51 AM

  • HP Pavilion gets hot and shuts down when using battery

    Have HP Pavilion dv7 and when using it on batter it gets real hot and shuts down.  What is the fix?  Thanks.

    sorry guys i was using the wrong driver i was using the normal one not the powernow k8 or w/e i needed

  • Why do I get a "call ended" alert when using  Googles Maps through hands free Blue Tooth service in my car

    Why do I get a "call ended" alert after voice directions, when using Googles Maps App with my iPhone 5s paired to Bluetooth service in my GM auto

        Hello Snosilla! I'm so sorry for all the confusion and for all the time taken to activate service with us! I do see that the iPhone 5c is $99.99 right now. The iPhone 5s is actually $199.99. There's no need to call Pam anymore, we can take over from here.
    I've followed you in the forums. Please accept me, and follow me back. Then, send me a Direct Message and I can look into this for you. If you do not have an active line yet, I may need to get you through to our activations department, but I will do all I can!
    Thank you!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport
    VZW Support

  • Cannot get the details in ME2N when using ALV but can when using BEST

    Hi experts,
    Could you let me know why I am not able to get the results when using ALV as Scope of List in ME2N Transaction, but can get data when using BEST?
    Regards,
    Pri

    Hi Priya,
    Check the following :
    IMG-> Materials Management-> Purchasing-> Reporting-> Scope of List->Define Scope of List
    Here select ALV and click details.
    Check the check boxes you need.
    Cheers,
    Satish

  • My new 7D gets very dark pics indoors when using "automatic" settings. Whats wrong?

    My new Canon 7D gets very dark pics indoors when everything is set on "Automatic".  So did my 60D, which i traded in for the 7D because of disappointing dark pics when on "Automatic".  This happens with the built-in flash, and also with my 430EX II external flash.
    What am I doing wrong?  I would like to make it work properly on "Automatic".
    Thanks,
    Art

    moxfulder wrote:
    Thanks for your responses!  I'm not using a flash.  The lighting is sufficient for even my iPhone4 to capture images with no flash, but the 6D's images are dark.
    Oh, sorry, I misunderstood.  That must be your exposure compensation.  Is it centered?

Maybe you are looking for