Getting Reason Code, Condition Type, and Condition Value in one report

Hello there,
I have got a Question for you all BW Gurus. I need the answer for this as soon as possible. I will assign points to all helpful answers.
I am having a Sales cube, Delivery Cube, and a Conditions Cube which I built. Each cube is populated from different ODS. Means there are 3 ODS for 3 cubes. I am joining these 3 cubes under a Multiprovider.
My Question is:
We are using Reason Codes at Delivery level. We have identified an empty field in the delivery tables and populating this field with the reason codes. We have condition type and condition value only in the Condition cube. One of the reporting requirements is that we need to see Reason code, Condition Type, and Condition value in one report. I am planning to report on the Multiprovider. Since Reason code, Condition Type, and Condition value are not present in all the 3 cubes (means they are not common characteristics in the Multiprovider), I dont think I can get those values in one report if I report on the Multiprovider. Please correct me if I am wrong. If what I say is correct, please tell me how to solve my problem. Once again, helpful answers will be greatly appreciated and rewarded with points.
Thank you in advance.
Kind Regards,
Swathi

Hello Swathi,
Please do not post the same question on multiple forums.
Thanks,

Similar Messages

Alternative condition type and base value

hi
gurus i am very much confused with this
alternative condition type and base value plzz clear me from this confusion
give me with realtime example and tel me in simple way
they will fully rewarded. and also a gud help to me
thanks
srinivask.

Hi
hope it is Alternative Calculation Type and Alternative Condition Base value
if so pls refer below
<b>Alternative Calculation Type:</b>
Normally if you want to calculate a value you have to use a calculation type for determination the value. This calculation type is either addition, subtraction or multiplication. Similarly SAP also has got a default calculation type in the control data of the condition type. There you have the options of either Qty based , Fixed Amount Based or Percentage based.
Here what happens is suppose if you define Your condition type that calculates the base price of a material on Qty based. Then the calculation will be done based on the quantity of the material. If the customer orders 10 Nos and you have maintained a unit price of 100 Rs for each material then the value determined is 1000 INR. Similarly if the discount condition type , you maintain the calculation type as %. This means if you maintain the value of 10 % in the condition record. Then this percentage is taken as the calculation type and the condition value is determined.
In some cases you have to forego the default calculation types and use the customer specific method for calculating a value. For ex if you are calculating the Freight charges for a Material . it depends on so many criteria like, the weight, volume and also the minimum amount etc etc, in those cases, you forego the default value and then use the alternative calculation type in calculating the condition value against the particular condition.
<b>
Alternative Condition Base value</b> :
If you have to calculate any value then you have to have a base value for it. For ex if you want to calculate the discount of 10 % for a material then you have to have a base value on which this 10% is calculated. Normally you take the condition value of the base price of the material to calculate the value.
Now you don't want to take the base value and take other values as base value which are derived on some formulae. So you create a routine which will do the mathematical operations in the routine and derive you a value which is now used as the base value for calculating the condition value for a particular condition type

Where do we pass tax condation type and condation value in this bapi: SD_SALESDOCUMENT_CHANGE

Hi Experts,
I am using this to change sales order. SD_SALESDOCUMENT_CHANGE
I am passing condation type and condation values for each line item under table parameter CONDATION_IN. Here in which fields do i need pass tax condation type and condation value.
please give me suggestion it is really help ful.
Thanks
laxmi

Hi ,
Pass condition type and condition value in fields COND_TYPE and COND_VALUE under table parameter CONDATION_IN. Also pass 'X' to above fields in table parameter of CONDITIONS_INX.

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

How to get line item net price and net value?

I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

So I can't download songs from my account because I now live in Mexico? How do I get my music from Icloud and down load new ones? Do I have to fly to the USA ?

I can't download songs from my account because I now live in Mexico. How do I get my music from Icloud and down load new ones to my computer?

Hi gene98,
Welcome to the Apple Support Communities!
It sounds like you still need to change the country for your iTunes Store account. Please review the attached article for information and instruction on how to do so.
Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account
http://support.apple.com/kb/HT6119
Have a great day,
Joe

Unable to pass the values from one report to another using navigation links

Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AO

Hi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna

How to get xkomv-kwert (condition value) from a pricing condition ZZP1

Hi experts,
   I have a pricing condition zcust that I need to modify in the sales order.   The calculation of ZCUST is dependent on the condition value in another price condition ZZP1.   The price for ZZP1 is a fixed amount of $6 which is split among line items in the order.    In sapmv45A, when the code hits userexit_save_document_prepare, the value of xkomv-kwert (condition value) exist.   In other user-exits in sapm45A, I was unable to find xkomv-kwert. My question is: How can I find the value of xkomv-kwert as i don't know how ZZP1 is calculated ?? There is no routine attached to ZZP1.
    THE ZCUST has a routine 993 which is similar to 3.   Here in program saplv61A, i was trying to get xkomv-kwert for ZZP1 but unable to get any data.   Can anyone suggest where i can get the data (xkomv-kwert) for ZZP1 in saplv61a ?
I looked at userexit_xkomv_bewerten_end in saplv61a but it does not help.
XKomv-kbetr always has data.    If i have ZZP1 data, then i can modify ZCUST.
Many thanks.
Joyce

Hi Jelena,
In VOFM, it is Formula/Condition Base Value for routine 993.   In Pricing Procedure, it falls in column "Base Type" for 993.
Let's see if i can simplify this: In a sales order with 2 line items:
               prices                    Amt                      Condition Value (USD)
Line 10     ZS1   sell price     2.30                                 1150
                 ZPP1 charge        6.36                                 3.40 (note the distribution **)
                 ZL1                      3                                      3
                ZR1 %                  1.000%                            11.50
                ZR2                      0.01                                   5
                Suggested price = 2.35                             1172.90
                  ZCUST               2.34                                1170
                  total price            2.34                               1170
Note: The ZCUST price is wrong. It is missing the ZPP1 charge which is 3.40. Zcust should be 1170 + 3.40 = 1173.40
Line 20     ZS1   sell price     25                                 1000
                 ZPP1 charge        6.36                                 2.96 (note the distribution **)
                 ZL1                      3                                      3
                ZR1 %                  1.000%                            10
                ZR2                      0.01                                   0.6
                Suggested price = 25.41                              1016.56
                  ZCUST                   25.34                           1013.60 (should be 1013.60 + 2.96)
               Total price                25.34                            1013.60
You can see the ZCUST is calculated incorrectly. The routine calculate zcust as $1170 and $1013.60 for each item which did not include the distribution amount of ZPP1 ($3.40 and $2.96).
When i debug the routine, the xkomv-kwert is zero.   I am trying to get $3.40 and $2.96 so i can add to to zcust in the routine.
Am trying to determine in saplv61A at which include that i can see #3.40 and $2.96 for both line items in xkomv-kwert.
Then maybe i can modify the routine or saplv61A so it shows the correct zcust price after entering the 2 line items in the sales order create (VA01) ?     Can you pls suggest ?
If i make the changes in USEREXIT_SAVE_DOCUMENT_PREPARE, then user cannot see the correct zcust until the order is saved. This would be too late to know the zcust price ahead of time.
Pls view in the Edit mode... i see my texts have been compressed.
Many thanks
Joyce
Edited by: Joyce Chan on Jul 9, 2009 10:24 PM
Edited by: Joyce Chan on Jul 9, 2009 10:25 PM

COPA value field not getting complete SD condition value

Hi Gurus,
I find a strange issue when a billing document is transferred to COPA (well basically, after a billing document is released to accounting, all the controlling docs and COPA docs are generated). The issue is, I have a SD pricing condition which has been assigned to COPA value field. I also have the transfer +/- sign checked on this value field. Now consider the following 2 scenarios:
Scenario 1: In VKOA, two different G/l accounts have been assigned to the corresponding pricing condition account key. These 2 G/L accounts have been defined as cost elements with category '12' (its related to sales deduct). and fall under the same cost element group. When a billing doc is posted to accounting and hence to COPA, I see that there is no value in the value field and the corresponding condition type. Then I ran a simulation using KE4ST and found that I have two lines with the same pricing condition type and value field but one carries a positive value and the other one carries a negative value. Then I came to a conclusion that may be these two lines are netting out and hence there is no value being posted on the value field.
Scenario 2: In VKOA, I have assigned two different G/L accounts which fall under different cost element group and one is defined as category 12 and the other as category 1. This time I see that only 1 line of value field is brought into COPA corresponding to the pricing condition and hence I see a value in COPA value field. But business doesn't want to go with scenario 2 as they don't want to use two cost elements in different cost element group. Also one is sales deduct and the other is primary cost/ cost reducing revenue. So there is a balance getting accumulated in the primary cost/cost reducing revenue element.
How do I resolve this issue to post a value to the COPA value field using scenario 1? I have also tried to uncheck the transfer +/- sign but I am unable to even release a billing doc to accounting as it is giving me a error message,: "correct the value field assignment for the condition type".
Please help me !!
Regards,
Sony

Version of SAP?

Getting header data (condition values) for shipment

For the shipment VI03, the user wants the header Condition values(KWERT) corresponding to condition values(KSCHL).
Some of the condition type having values in item level but these condition types are not maintained in header level, so they want for these condition types values should be Zero.
As I am taking condition values for PRICING function module, it will display at sub-item level values depending on condition values.
Please let me know is there any functiona module or table exist where header data is directly mainatined(Condition values & Condition type).
Thanks & Best Regards,
Mahesh

First find the related salesorder using:
VBFA
VBAK-VBELN = VBFA-VBELV
LIKP-VBELN = VBFA-VBELN
VBFA-VBTYP_N = 'J'.
or
LIPS
VBAK-VBELN = LIPS-VGBEL
After that, with the order, get condition number in VBAK and then search KONV.
VBAK-KNUMV -> KONV-KNUMV.
Regards.
Valter Oliveira.

How to post reason code/movement type from MM to FI document?

Have had a request from our Finance guy here that when a movement is posted in MM (eg a scrapping), the reason code and movement type are to go onto the FI document when the movement is posted to the GL accounts. These values are to be viewed from FBL3N.
He thinks it might need to be done with substitutions but I have had no experience in this area and he has no idea how to go about it. I have extended the COBL structure using OKX3 which has put the field into BSEG but have no idea how to go about doing the substitution or which exit to use. Inaddition in SAP standard, MSEG passes the movememnt type tyo COBL field BWART but then this seems to get voided.
Can anyone help me?
Regards
Larissa Maryniuk

Hi Larissa,
Please go through with this below link. You can easily understand about Substitutions.
http://techbays.files.wordpress.com/2008/08/sap-tip-how-to-use-substitutions-lakshman-tandra1.pdf
Best Regards,
Mohan.

Get Uploaded File Mime Type and Client Filename

Anyone know how to recover an uploaded file MIME type and
client file name?
I'm writing my own cfx tag to process file uploads and pretty
much have it figured out except to determine the name of the client
file and mime type. The formfield file variable value contains the
path/filename to the CF temp directory, but I need the MIME type,
filename, etc. that is contained int he HTTP Header
(e.g. Content-Disposition: form-data; name="Image";
filename="C:\test.JPG"
Content-Type: image/pjpeg
[empty line])
I'm using the getHttpRequestData() functiont, but it only
gives me the content-type multipart/form-data, leaving out the Mime
type and Content-Disposition (which contains the client file name).

Hi Daniel,
do you use EPG, mod_plsql or APEX Listener? Have you changed the connection mechanism after upgrading to 4.2.1?
If you use the APEX Listener, which version do you use? Which browser and version do you use to upload the file? Does it reproduce with other browsers as well?
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

What's the proper workflow to combine multiple video types and turn them into one high quality DVD?

I'm trying to combine 1080i (29.97fps), 1080p (29.97fps), and 720p (24fps) video files into a single Premiere Pro project, and end up with a high quality DVD.
There are a few problems I can't solve:
1. There seems to be interlacing and clarity issues any time I export it to DVD dimensions (720x480), and on some TVs I'll get a bouncing motion on the 720p footage (slideshow). Yet everything seems to look perfect when I export it something like an HD MOV file.
2. If I use Final Cut X to make the DVD, I'll get audio popping and decent image quality. Yet if I use Encore, I'll get horrible interlacing, but good audio.
I don't have any training in video workflow let alone how to properly diagnose and solve problems that arise. So I need someone to lay out the proper workflow and settings from start to finish to get these three different types of footage to look great on a DVD using Premiere/Encore.
I've attached sample images showing the types of footage I'm using and the kind of problems I'm running into for reference.

By far the best way to get the quality of encoding is to use Compressor and not DVDSP. You can set Compressor up to do the AC3 (which DVDSP can't do). Alternatively, use a better encoder than Compressor, such as BitVice or MegaPEG.X... but remember that these do not do AC3 encoding.
Keep the encoded assets all in a single folder on your mac, then drag that folder into the DVDSP 'Assets' tab. This will import them all and keep them in the folder, which is a neater way of doing things. Select all of the clips within the folder (or simply select the folder itself) and drag them on to the track - they will go on in alphabetic or numeric order (whichever you have used as your names). If using numbers, remember to use '01', '02', etc otherwise clip ten, eleven, twelve and so on will follow clip one... clip two will come after clip 19.
Drop them all on a single track. You can then point a menu button at the track and all of the clips will play one after the other. If you want black in between then you will be better adding this in a NLE such as Final Cut, then exporting the entire sequence of clips as a single file. Alternatively, create a black .pict file the correct dimensions for the video format you are using and manually add it in between each clip on the timeline. Or, create a series of black .pict files and name them 011, 021, 031 and so on. Place them in your folder of clips with the MPEGs named 01, 02 and so on. When you select all and drop it onto your timeline within DVDSP a black clip will go in between each piece of footage (sequence will be 01, 011, 02, 021, 03, 031 ). This is probably the quickest way to do it. You can reuse the same black .pict files for every project like this and as long as you follow the same naming convention it will always work.
Like anything you want to automate, the first couple of times take longer to set up. After that it is a lot easier.

Selecting both static and dynamic values in a report.

Hello,
I am using the following LOV for a select list in a form based on another post (Re: Static and Dynamic LOV ordering
It is presenting five static values along with a dynamic LOV.
select d, r
from (select n, d, r
from (select 1 as n, 'NAME_A' d, 1 r
from dual
union all
select 1 as n, 'NAME_B' d, 2 r
from dual
union all
select 1 as n, 'NAME_C' d, 3 r
from dual
union all
select 1 as n, 'NAME_D' d, 4 r
from dual
union all
select 1 as n, 'NAME_E' d, 5 r
from dual
union all
select 2 as n,
(LNAME || ', ' || FNAME || ' (' ||
to_char(DOB, 'MM/DD/YYYY') || ')') display_value,
ID return_value
from my_name_table)
ORDER BY n, r asc)
The static display and return values do not exist in my_name_table, but the static return values are recorded in my_main_table when the user submits the form.
The tables look like this:
my_main_table:
record_id
name_id
my_name_table:
name_id
fname
lname
How can I present the display values associated with the static return values recorded in my_main_table along with the dynamic display values in a report? I am currently presenting the dynamic portion in a report using the following select statment:
select
(my_name_table.LNAME||', '||my_name_talbe.FNAME) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID
I have the additional problem that the static return values are not in my_name_table so the join in the last statement will not find the static values in my_name_table.
Edited by: mterlesky on Feb 24, 2009 9:51 AM

1. You will need to add an outer join to return all the values in the Main table.
2. Then decode the values for the static LOV.
Something like (this is not tested, but should give you the idea)
select
decode(my_main_table.NAME_ID,1,'NAME_A',2,'NAME_B',3,'NAME_C',4,'NAME_D',5,'NAME_B',(my_name_table.LNAME||', '||my_name_talbe.FNAME)) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID(+)
This will all break if any of your static LOV ID values clash with your dynamic LOV ID values.
I am now going to give you a long lecture about hard coding values ..... ;)
Related info: http://simonhunt.blogspot.com/2009/02/how-to-cope-with-list-of-values-lovs.html
I hope that helps
Shunt

Getting Reason Code, Condition Type, and Condition Value in one report

Similar Messages

Maybe you are looking for