Getting Red Alerts at a particular process type in Process chain

Hi Experts,
In a Master data chain, We are getting 'RED' alerts in process type ''Delete Target Contents'' in which we have write optimized data.. But the data deletion of that DSO and rest processes are working fine, we can see the reports and all..but we dont understand that why this RED alert coming every day...
Suggest on it, if any one faced this problem..
Thanks..

Hi,
Yea i checked that message in which "DROP CUBE failed for the Target" but this is a Production system so we cant touch anything now because we getting the reports normally.. We want to look into the Alert with out any changes in current system..
Thanks,

Similar Messages

I want to kill a particular process chain from a meta chain..

Hi All,
I want to kill a particular process chain from a meta chain as, its having some technical issues.So what is the procedure.to handle this process..
Thanks..

follow these steps
1.Go to the chain which you want to kill .
2.Go in the log view->top menu bar execution tab.>Remove from schedule.
you are done
Another way (bit complex but will work )
1.Go to the process chain running (which you want to kill) in the log view copy the logid (lef hand side of screen you can get that)
2.Open a new session ,Go to se37 enter function module RSPC_PROCESS_FINISH -->execute it
3.Now again go Log view of the process chain right click on the start variant>display messages>Chain tab
copy the variant ,instance ,date time etc
4.IN execution screen of RSPC_PROCESS_FINISH enter the variant,instance,data time,logid and Type=TRIGGER
status = R.
Actually you will see something like this in input screen
I_LOGID -
>from log view in RSPC
I_CHAIN
I_TYPE   -
>TRIGGER for start variant
I_VARIANT----
>from log view in RSPC
I_INSTANCE------>from log view in RSPC
I_STATE     -
>R
I_EVENTNO                       00
I_HOLD
I_JOB_COUNT
I_BATCHDATE   -
>from log view in RSPC
I_BATCHTIME                     00:00:00
I_DUMP_AT_ERROR
Thats all and your are done.
But I would suggest Remove from Schedule will surely work....If you have any doubts let me know.
Regards,
Rocks

How to identify whether that particular process chain is active or not?

Hi all,
How to identify whether that particular process chain is active or not ?
thanxs
haritha

If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
RSPCCHAIN
RSPCCHAINT
to check the logs
RSPCLOGS
RSPCPROCESSLOG
Give the chain name and check in the object version.
Khaja

BW: Not getting Dump For Program error in Process Chain

I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

Process chains: error when including CVC generation process type

hello all !
I have a Pc that loads data from custom extractor into a Icube.
next triggers Generate Characteristic combination which never executes. Status remains active but no "completed succesfully" (yellow triangle) in monitor of pc.
When I run it alone the CVC generation process types executes OK...??!!!
My sequence is Delete Index from cube ---> Load IP --> Atribute change run ---> Create Index --> Delete overlapping request (up to hear loads oK although status never becomes green '??)
final step is a CVC generation + adjust time series process type.
Does any of you know why the error ? and how to help solving it out ?
appreciate all yur comments

Hi Samir,
I guess you can directly go to RSA1->Source Systems.Rt click and Transfer Global Settings then Delete the Red Request and Go to the Particular Process chain and do a Repeat/Repair.
You can try repairing it...
Rest of your question is not clear.... Give me ur number, will call you, then we will discuss
Rgrds,
Habeeb

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

"Save Hierarchies" step in Process chain getting failed

Hello all,
After searching thoroughly through various links / forums, i failed to get a solution. So, I am posting here.
Recently we had a system copy. After that, in Quality system - "Save all Hierarchies" step in PC is getting failed.
I ran the process chain for 3 times till now:
1) Sometimes, it fails at batch monitor itself with UNCAUGHT_EXCEPTION runtime error.
2) Sometimes, it fails saying "Error 0 when reading PSA 1" & "No hierarchy found for the selection criteria entered".
When it fails with "Error 0 when reading PSA 1", then the above Hierarchy info package which is green automatically turns RED again with Process monitor saying "No PSA tables for the selection criteria".
I also went through the below sdn links.
http://scn.sap.com/thread/278794
http://scn.sap.com/thread/1753212
Things I did:
1) Tried replicating & activating the Transfer rules and Data source.
2) Repeated the step, as suggested in one post.
3) Refreshed the OLTP hierarchies in Infopack. selections.
I have attached a screenshot of a sample Data source which says Modified, though the transfer rules are active. Also, the process chain sample.
Please let me know, if someone has faced this issue. Whatelse did I miss? Any clue.
Thanks,
Vikranth.

Hi Raman,
I couldn't retransport, but i removed it from schedule and re-activated it. But, i think the issue lies with one of the Info objects 0PROFIT_CTR.
Because, when i tried to check the hierarchy structure; there are duplicate entries for one code. Can we delete one of them? Is it preferable.
I tried using OSS and used a program RSR_REPAIR_INFOAREAHIER but this showed no errors.
Any clue?
Thanks,
VIkranth

How to Trigger an Alert from a Process Chain

Hi BW-Experts,
i have implementated a custom process type. Then i choose my alert and activate the process chain. After this i make a double click on my process type, there is always a standard alert deposited (RNIF_ALERTS), but not my alert. What is my error? Thanks!

Hi,
See if the discussion in the following threads help :
Raising an alert at the end of process chain execution
Emails from Process Chains :
Email from process chain
Cheers,
Kedar

Email alerts in process chain

Hi
I am trying to send email alerts (messages (sucess/Failure) thru my process chain , I gave the correct email -id a , but I'm not getting an email, after I schedule it, to I have to make any settings with Basis team?? Can some one share what are the initial steps , which have to be taken ??.
Thanks
Praveen

Hi Praveen,
Please follow the below steps
Would like to share this information regarding email alerts whenerrors occur in Process Chains.Step by step process to follow:
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards!
Mallikarjuna Reddy

Process chain on a particular day and multiple times

i have a requirement to run a process chain 2 times on saturday (one at 3pm and another at 8 pm) for a particular process chain only !!
how do i do this ?? some one please help....

Here's one idea:
Create an ABAP program that calls the RSPC_API_CHAIN_START Function Module. In this program, create a selection screen that has the same selection criteria as this Function Module. When you have tested the program and ensures that it works properly, create a variant for that program, for the selection selection screen criteria, and save that. After you have transported the program and variant throughout your landscape, schedule two separate jobs in tcode SM36 of your production environment. One as a weekly periodic job that is scheduled to start on a Saturday @ 3:00 PM and another weekly periodic job that is scheduled to start on a Saturday @ 8:00 PM.

Link error in Process Chain.

I have a process chain that has received an error on a link (red line between processes). I can display the event and see event = RSPROCESS and
Bkgrd event param. = 59SP2GLEKWWWRE8GWTM87CZXY.
How can I research what is causing this error. It has ocurred twice in production. Can I use the event collector some how to see what is happening?
Thanks for your help.
Denny

Hi Dennis,
What ever the time frame that u have for a particular load, whenever that load finishes then u will get the proper light in ur process chain. Once the time exceeds for a particular process then the status in the monitor as well as in Process chain will change to red.
What u can do is u can wait for the load to finish.
U can set ur own time frame for a particular load, so that u wont come across this problem..
Some times bcoz of the TRFC problems b/n the partner may also causes this type of problem.If that is the case then u have to wait for the load to finish.
Hope this helps-
MM

Process terminates in process chain

Hi ,
I do have 7 Meta Chains running under one of the Process parallely in BI 7.0. Unfortunately once in a while some of the process are terminating. Its start at the same time as all other of the process, but it does not executes the chain and turns red.
I don't even get a Process Monitor on that particular process nor a error message. i do can find the two clock symbols on that particular chain the LAST_SAVED & LAST_ACTIVATED. But the process chain does not run future.
If i run that particular process chain manually again it works properly.
Can you help me out, to run the process automatically .
Thanks in advance
Raju

Hi Akula,
When you Schedule a Process chain the Process will be ASSIGNED TO A WORKPROCESS OF aN Application server.
If there is no workprocess is avaliable in the Application server. the Process will be Terminated.
As you are scheduling Process chains there may be a Problem with Avaliability of work Processes.Check in sm50 for the no of application servers avaliable and check whether the work Processes are avaliable for each Application servers if you have more than one.
Try to avoid scheduling the Chains at the sametime.
hope it helps.
Thanks,
-Vijay

How to create messages in process chains?

Dear Gurus,
I want to use the alert system in the process chains. like when one process fails i have to receive the message on my mail or as an SMS on my mobile.
I tried the same thing with one of my process chain. When i right click one of my process in my process chain i will get the create message option. But my problem is i dont know how to use that option. If u have any solutions or any material please try to send me to the following ID <b>[email protected]</b>
Thanks in advance
Mohan Kumar

Hi,
You can also send messages to an application process of the chain, depending on the success or failure of the process.
1.       From the context menu of a process, create an additional process variant of the Send Message type.
2.       If you maintain a message, first specify whether you want the message to be sent when the process has been completed successfully or unsuccessfully. Then choose Next.
3.       You arrive at a window, in which you can select an existing process variant or create a new one.
4.       If you create a new process variant, edit the document that is going to be sent, and maintain a list of recipients.
5.       Save your process variant and go back a step.
The message process variant is now assigned to your application process. When the message is sent, the status information and the process log can also be sent.
Hareesh

Execute process chain step based on value in a custom table

HI,
I have a requirement where i need to execute a process chain step based in the value of a field in a custom table.
e.g. If ztable-zflag = 'X' then execute next step else stop.
I am trying to use the decision between multiple alternatives process type, but i guess we can only use formulas in it.
Also, i created a custom method and called it through the badi RSAR_CONNECTOR, but the same isnt working as expected.
Would appreciate inputs from the experts.

Hi,
Thank you for your response.
I followed exactly what is written in the document. But when I execute the process chain with the Decision between Multiple Alternatives process type, it fails with an exception message.
Below is what I have done:
Below is the code that I entered in the method (Please note that ZPC_CONTROL is the table from which I need to check the value. This table contains 2 fields: Process Chain Name and Flag. My requirement is that when a particular process chain has the flag checked, then the process chain should move ahead):
Below is the GET method:
Finally, here is the formula that I have written in the Decision Between Multiple Alternatives process type:
And the event is Option 2 (which I assume will move the process chain forward if the flag is checked for the process chain ‘TEMP_TEST’)
Please note that the flag for process chain ‘TEMP_TEST’ is checked in the table ZPC_CONTROL.
Below is the error in the process chain:
Please let me know where am I going wrong here. Appreciate your help.

Table for Start and End time of Process Chain

greetings experts,
Hi All,
I Have to give an Excel Sheet to Top level manager on Start and End Time of Data Load in each InfoPackage (PSA Load) triggered by Process Chain, please let me know if there is any table who keeps these information.
Regards
Sulochan

Hi,
You can use the program /SSA/BWT to give the Timings of the process Chain runs.
1) To access this tool Goto SE38 .Type in u201C/SSA/BWTu201D as the Program name and click on execute. The list of all the tools that this Program contents are displayed.
2) By default the option u2018Process Chain Analysisu2019 is selected. Now click on the execute button. Then you are displayed with the options through which you can select to perform analysis at Process Chain level or Process Type level. (Along with that, the Time Zones used to display the information is also displayed)
3)If you click on the button u2018Process Chainsu2019 a window Pops up, here you need to provide the Chain-ID and/or the Log-ID and the Start Date/Time and the End Date/Time.
4)Decide the parameters to enter as per your requirement, suppose your requirement is to check the runtime of a particular process chain for the past one week, then provide the technical name of that chain in the field Chain-ID and the start and end dates as per last one week and click on execute.
5)Then the logs of the Process Chain for the selected dates are displayed along with the status (Red, Green or Yellow). The logs of the local chains (if any exist in the Process Chain selected) are also displayed (Much more additional information exist which is self explanatory). Now you can have a look at the Runtimes of different logs.
Regards,
Suprajah.

Getting Red Alerts at a particular process type in Process chain

Similar Messages

Maybe you are looking for