Getting red noise on all my exports from media encoder.

I have had CS4 for a while now on PC. It has worked great until recently. Everything I export out of premier via media encoder gets this quick random red stamp looking noise that flashes periodically through my video. I have been exporting AVI, and I can't remember if it has happened while exporting any other format. I have included a frame from my video of what it looks like. Any suggestions?

Brad,
To restate what you have said - and to make sure I'm on the right page with you:
You have two types of Assets: MOV raw, Captured in FCP and Lagarith AVI Exported from AE. Both play fine outside of PrPro (.MOV's slightly pixelated in QT Player) and both Import and play fine within PrPro. The problems come, when you Export from PrPro. Is this correct?
As a test, have you tried other Export schemes from PrPro, such as DV-AVI? This is only as a test, as it will obviously not be what you ultimately need.
Just curious. Good luck,
Hunt
[Edit] going back to the OP, I see that it has been an Export as .AVI (which AVI CODEC?), that seems to have caused this. Can you try maybe an MPEG-2 Export?

Similar Messages

Exporting from Media Encoder using Vimeo Preset and getting pixelated footage in a specific location

I am exporting a video using Vimeo preset 1080p 23.976 H.264. Everytime I export the entire video approx 5 minutes long I get pixelated footage at a very specific point every time. I've tried multiple workarounds, relinking the media, exporting to different location (willing to try anything at this point).
When I just export the specific problem area the problem is non existent.
Any advice/help is greatly appreciated.

I am using the CC version, so I should be up to date from my understanding.
Magically, that worked! I'm just curious why I had that problem in the first place? Any insight?
Thanks again! You're quick response is much appreciated!

FLV Export from Media Encoder

Hi, When I export an FLV from ME, the clip does not play or starts and then stops on Vital Streams servers. I can take the same clip, export a movie as AVI, then bring it into ON2's Flix Pro (using the same codec as ME FLV export is based on) and generate a perfect FLV with the same settings. Has anyone tried to export an FLV and then upload to a streaming server? I use this for clients to review their projects if they are long distance. Thanks for any direction.

Higher the bitrate the better the quality and file size. So the way I've been trying to work it out is literally, how large can a video be per minute and then depending on how long the video is I try and get it down to a certain video bitrate.
For me audio is important as well and so I'm essentially setting the audio bitrate to 128k.
Yes, your video does not play for me either. Is this video encoded using PPro CS3?
Essentially, the FLV files are intended to be played back using the Flash/Flex video player, and they do. I'm new to the whole "Flash" world as such (I'm Primarily a software programmer and not a designer) and so I don't know much about third party player/tools like Flix Pro.
What I can offer to do for you is make you a host like the one I'm made that you can use within your own website. If you'd give me the deminsions of the videos you produce (for online viewing) I can make you a player (no cost). It'll be my way of paying back this forum. If you send me an flv encoded using PPro CS3 that'll be even better :)
If you're a grpahics person, you could also send me png images of buttons and the like and I'll incorporate them into the flv player.

Clips exported with Media Encoder from AE are choppy (CS6)

Hi!
I'm using Media Encoder (6.0.3.1) to export clips from AE (11.0.4.2) so that I can work with them in PPro (6.0.5).
In Media Encoder I go to add AE composition and I've tried the YouTube HD 1080p 25 and the Broadcast HD 1080p 25 presets (the latter creates a much bigger file but I don't think the file size is the issue - for example, the biggest clip of approx. 1 mintute is 276MB).
The curious thing is that most of the clips that are exported are fine, i.e. they play back fine - the problem is that some of the clips go slow or choppy towards the end of the clip. So the last couple of seconds will be choppy. It basically looks like the frame rate isn't quite right.
Once exported from Media Encoder, I import them into PPro to do some more work - the problem with the clips is apparent when I play the original file in VLC (for example) or in PPro. So it seems like the problem occurs during the export from AE. When I export the video containing the AE clips from PPro the problem is obviously still there (wishful thinking on my part). I use AE just for keying and making some basic titles, nothing massively complex.
I had some problems with RAM preview in AE before, in other words, it wasn't playing the clips back in realtime and the exported clips with the problem look exactly like that (i.e. looks like the frame rate isn't right). I deactivated Enable Disk Cache in AE (Multiprocessing was already deactivated) and now I can play back clips ok in AE using RAM preview - even the ones that go choppy towards the end when they are exported with Media Encoder play back fine in AE.
Could Media Encoder be going back to some previous render files saved somewhere on my system and could that cause some of the exported clips to go choppy?
I'm new to Adobe so I'm just guessing here and I don't want to go about and delete stuff that might not have anything to do with this problem. As I've adopted the computer I'm working on from my predecessor and it's had several users since, the system is a bit of a mess and there are files all over the place. Empting the Disk Cache doesn't actually delete anything for example.
I'm really stuck here because I can't finish the projects I started working on with AE.... I would appreciate someone's input!
Many thanks in advance!
My system specs:
Intel Core i7-3930K, 3.20GHz, 16GB RAM, 64-bit operating system, GeForce GTX 680, Windows 7, Creative Suite CS6
Before using Media Encoder to export clips from AE I was just relying on Dynamic Link between AE and PPro by the way and that made all of the clips choppy for the whole duration (this was before I solved the RAM preview problem and I haven't checked if a working RAM preview would make a difference to dynamic link). So Media Encoder nearly solved the problem. I posted this original problem on creativecow (http://forums.creativecow.net/thread/2/1045810) but no one has gotten back to me about the new issue unfortunately.

Thanks for your reply!
I tried using Quicktime with PNG and it created a big file (1.18GB for a 1 minute long clip) that doesn't play back nicely in PPro unfortunately. But I then tried rendering the clip using a lossy format, H.264, in AE and it's playing back ok in PPro! I will just do that for the rest of the clips and hope that this is finally resolved. Many thanks for the tip!
Out of curisoty, do you know what might be causing the problem when I use Media Encoder?

How do I export wmv and avi files from media encoder on a mac in CC2014

How do I export wmv and avi files from media encoder on a mac in CC2014?

John T Smith wrote:
As far as I know, you don't... those are Windows formats that are not available on a Mac
Nonsense.
Apple Compressor has been doing wmf exports for a decade. I have the Quicktime export components from Telestream and they appear as presets in Compressor. They should be available in Media Encoder or they should be importable. Adove apparently refuses to see them. Still trying to figure that out.

Premiere Pro CC not queuing exports into Media Encoder CC

I try to make this simple...
standard export from PP CC to ME CC
File -> export -> media, then hit queue.
Media encoder opens and just sits there. Left it for hours to see if anything would ever happen, and nothing ever did.
I've restarted the programs and machine dozens of times and that does nothing.
I can still export from PP CC.
I have no CS6 products left on my box.
I also tried to open the project from Media Encoder and load the sequence that way with no luck.
Thanks for the help!
On a Mac Pro
Premiere version 7.0.1
Media Encoder version 7.0.1.58
Adobe Creative Cloud for Teams Member (so it's licenced and updated to the fullest)

rforgaard wrote:
I had this exact same problem, and I figured out the solution in my case. I know the original problem report is ancient, but there are recent replies, so I am adding my solution here. I spent untold hours figuring this out, so hopefully this will save someone else some time.
There can be other causes to this problem, I'm sure. I'm just telling you about what fixed this problem for me.
Just to clarify, here is the symptom: Running Windows 8.1. Standard export from Premiere Pro CC 2014.2 to Media Encoder CC 2014.2, using File -> Export -> click Queue. Media Encoder opens and just sits there. Premiere Pro is hung and has to be forcibly terminated.
I spent countless hours on this. I thought I had messed up my computer's configuration somehow, so (believe it or not) I re-installed Windows on a freshly formatted hard disk, re-installed Creative Suite, same problem. (I can't believe I wasted all that time; I feel like a dummy.)
I finally narrowed it down to a very simple test case with a very tiny one-clip sequence that is less than one second long. Same problem.
It turned out to be a problem in the Premiere Pro project file itself. I suspect that a small file corruption somehow snuck into the project file, that was completely invisible. In that clip in my project, if I removed the "Vocal Enhancer" effect, the problem with exporting to Media Encoder went away. If I then re-added the very same "Vocal Enhancer" effect, the problem was still gone. It must be some small corruption in the ".prproj" file that went away when I removed the "Vocal Enhancer" effect and re-added it again.
NOTE: I DON'T think that there is some kind of bug with the "Vocal Enhancer" effect. I don't think this problem has anything to do with "Vocal Enhancer" per se. It is just some kind of small generic corruption in the project file. When Premiere Pro tries to export that sequence to Media Encoder, the problem occurs. It was just a coincidence in my case that removing and re-adding the "Vocal Enhancer" effect made the problem go away.
BOTTOM LINE: If you find that you have this bug where Premiere Pro hangs when exporting to the Media Encoder queue, try the following: Create a brand new project with a single clip in it, and export it to the Media Encoder queue. If that works, you know that it is not a problem with Premiere Pro in general; it's a problem in your specific project file. Once you've made this determination, make a copy of your original project file, and remove clips from the project until the problem goes away. Keep narrowing it down until you find the clip(s) that are the issue. Then, try removing and re-adding any effects on those clips, or even removing and re-adding the clips themselves, to fix the problem. Eventually, by removing and re-adding a specific effect or clip to your project, the problem will vanish (hopefully). It's just a matter of narrowing down which half of your project the problem occurs in, then which half of that half, etc., until you have it narrowed down to one clip or group of clips that need to be removed and re-added.
Having said all this, it is a bug that ideally should be fixed so someone else doesn't spend untold hours trying to figure out the problem. To that end, I create a tiny ZIP file that just has project file and the single media clip needed to reproduce the problem, along with a small description "READ ME.txt" file that explains the very simple steps to reproduce the problem. I have submitted this as a bug report to Adobe using their official online bug report form at www.adobe.com/cfusion/mmform/index.cfm?name=wishform along with a link to the ZIP file so they can download and reproduce the problem.
If anyone else is curious about reproducing this same bug, you can also download the small ZIP file if you want to. I guarantee it doesn't have any viruses or anything - it's just two small files to reproduce the problem. To download the ZIP file containing that project file, media file, and "READ ME.txt" file, you can get it at www.forgaard.com/files/PremiereProBug.zip.
I hope this saves someone some time. This one sucked up a zillion hours of me chasing apparitions.
I was having a problem with exporting a sequence to AME. PPro would freeze and I would have to force the program to close. This was on a project where I was just running out a bunch of interview clips for the director to look at. One of them had a audio effect (DeHummer) on it, and it was the one that was giving me troubles. I selected the audio and right clicked then "Render and Replace" then it would export to AME with no issue. Thank you for your well written response to this thread. While it may not have fixed the OP's issue, it did help with mine....
Thanks,
Phil

Exporting to Media Encoder crashes Premiere Pro CC 2014

Greetings,
I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
Here are my system specs:
Premiere Pro CC (up to date)
Win 7 64bit (up to date)
i7 970
24GB Ram
NVIDIA 470GTX (driver up to date)
3 x 1.5TB internal
4TB internal
3TB internal
12TB RAID 5 via USB 3.0
USB 2.0 and 3.0 drives
FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
All stock video plugins with a few third party audio plugs.
This problem happens with and without third party plugs, but it happens that this project uses them.
I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
Is there anything that I am overlooking here?
Thanks for the help!

Hi
Premiere pro cc 2014 8.0.1 (21) build
Encoder CC 2014 8.0.1.48
I use CC for Teams so it updates all the time.
Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
Looks like some programers and engineers have some work to do.
Thanks
Dennis
My computer:
Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
ASUS P6x58D Premium Motherboard
Intel (R) Core i7 930 @ 2.80 Ghz
Installed Memory 12 GB
NVIDIA GeForce 9500 GT
NVIDIA GeForce GTX 580
2 Apple Monitors and a HP full HD Monitor
With a BlackMagic Intensity Pro Capture Card

Why will After Effects not export to Media Encoder?

After Effects cannot export to Media Encoder. I've tried to queue it within After Effects (nothing happens,) I've tried to import it from within Media Encoder (it hangs on a loading dialogue forever,) and I've tried restarting my computer. All to no avail. I've also tried multiple AE projects. And yes, I've made sure I am viewing the queue in Media Encoder. Any clues?

Ok.
Running Adobe Creative Cloud, latest versions on both After Effects and Media Encoder. As for render settings, I never get to that part. When I export to render in Media Encoder, nothing happens. Here are the settings for one of the compositions and projects I was trying to export:

How do I export on Media Encoder CC and play on Premiere Pro CC without affecting the export?

I can export on media encoder and play on Premiere at the same time if I save my project > Close premiere pro > open Media encoder > import premiere pro sequence > start export > and open my project on premiere again.
But I`m having some issues with the playback quality (sometimes it stop and the audio starts getting out of sync), and the export gets slow.
Is there anything I can do to export and play at the same time?
I need the full quality of preview.
Working with codecs XDCAM HD 422 and ProRes 422 on Mac Os X 10.7.5 (2 X 2.66 GHz Quad-Core Intel Xeon) wiht 24GB 1066 DDR3 RAM
Hope u guys can help.

You can just queue up the export right from PP, start the encode and then go back to PP to continue working. No need to close anything.
Doing this will slow down the export process, as PP will steal whatever resources it needs to run, often pausing AME to do so.

Premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

How to output from media encoder to camcorder via firewire?

I am using CS5.5 media encoder to output edited hi def footage from premiere as DV widescreen to sony FX 1 camcorder via firewire.
How do I route the output from media encoder to the firewire output?
This is the same camera I use for acqusition & import into premiere via firewire.
Media Encoder appears to be encoding the footage properly.
Thanks in advance for any help.
Sewerguy

How do I route the output from media encoder to the firewire output?
You don't--or can't, rather. You'd need to use Premiere Pro for this. Check this help page for details: Exporting to videotape

CS6 Encore requiring a second encode of H264 BluRay from media encoder

Have noticed that when I encode an H264 file in Blu-Ray for encore, that when I try to build the DVD I get a message that the file is not proessed. If I go back to media encoder and reprocess the existing H264 file, Encore will then accept it. I think this is a bug, but in bug report, no option for Media Encoder. this has happened on 4 seperate occassions since I downloaded th latest Adobe CS6 updates.
Anyone have any ideas?
thx...Jim Watt

Hi John,
Thanks for the reply. the file i'm atrtempting to use in Encore is an .mp4v file from media encoder, which is, I think the same file type i've used successfully in the past. When I re-encode the file has the same extension, but it will work. I perceive this is a new issue with the latest update of CS6. I've not encountered this issue before the update.
Thx...jw

CS4 Pro Export to Media Encoder has Audio, Titles, w/out Video

My Sequence is complete and looks great in the Program playback. I am exporting through Media Encoder and all goes well. I Media Encoder the Output looks great as well! The encoding takes about three minutes ends successfully. Yet, when I open the movie I have sound, titles all without video (black screen). I have tried many output formats including quitcktime & h.264 and different presets all with the same result. What's up?

Thanks for the assist! My Export Settings for my latest attempt:
Format: Quicktime / Preset: NTSC DV
Video: 720x480, 29.97 (fps), lower, quality
Audio: 48000 Hz, Stereo, 16 biy
DV/DVCPRO - NTSC
Anything else?

Premiere Pro CC - error on export through media encoder.

Hi,
I recently upgraded to Premiere pro CC. Everytime I try to export through media encoder the exports errors right at the end of the render.
It keeps prompting . Error - Disk Full. Thng is that I have 339 gig Available on the destination drive.
- I Cleared the disk cash.
- all the footage is Canon 5d Mk3 footage 1920x1080
- I've tried rendering H264 and mpeg2 footage .... It all errors at 99% stage
screen shot....
- adobe ... please help,
Duncan.

OK, So to be more specific it's hanging when I send it to Media Encoder Queue. I was just able to just do a direct export.
I found the article on permissions and that was not the issue.
I've made no changes to hardware and have done three projects with the same codecs, type footage, duration (1 hour range) with no problems.

How do I get Firefox to import ALL my bookmarks from Internet Explorer?

I've recently installed Firefox on my WXP computer, to replace IE. During installation, Firefox automatically put up a dialog offering to import all my bookmarks (i.e. Favourites) from IE, and I accepted. The resulting page confirmed that my bookmarks had been imported. However, on looking at the actual list of bookmarks "Imported from IE", I saw that the main Favourite headings had been imported in alphabetical order - which is fine - but that the import had stopped at the letter S. That meant that some important main Favourite headings (e.g. "Travel") hadn't been imported.
I then went to your tutorial pages and followed the instructions for "Importing Personal Data from Other Browsers", asking for just bookmarks to be imported from IE. What happened was that once again, FF imported only the Favourite titles up to initial S. (And now, furthermore, all the imported ones were duplicates of the ones already imported at set-up). Would you tell me, please, what I need to do to get the complete list of Favourites imported from IE?
Thanks a lot.
Ian Stewart

# Delete the duplicate bookmarks in the Library (press Ctrl+Shift+B to open it).
# In Internet Explorer, export your favorites in HTML format.
#* [http://windows.microsoft.com/en-US/internet-explorer/add-view-organize-favorites Export and import favorites | Microsoft Support]
# In Firefox, import the bookmarks from the HTML file.
#* [[Import Bookmarks from a HTML file]]

Getting red noise on all my exports from media encoder.

Similar Messages

Maybe you are looking for