Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Similar Messages

Rep-3002 while calling report from form in character mode on web environment

When I call a report by using run_product from a form , i get rep-3002. my report is in character mode. if i change it to bitmap that works fine. but my requirement is of character mode on web environment.
please help.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Urgent: Getting FRM-41211 when calling reports from forms for first time.

Hi,
We are running into the FRM-41211 error, when the users try to call a report from a form. The report is called from a form in SYNCHRONOUS mode. This is the only report that is being called. No other report is
running at that time when the users get this error. This is happening only the first time when they try to call the report from the form. After getting this error, when they click on OK, and when they try to call this
report again, the report works fine.
Any ideas?? It's urgent...
Thanks
Vamshi.
null

Maybe try to use "run_report_product"?

Error REP-3002 when call report from WebForm

Hi,
i run form (6.0) on Form Server (IAS9i) to call report (6.0) to print receipt on local printer using RUN_PRODUCT command (PARAMFORM=NO, DESTYPE=PRINTER) and got Error Message "REP-3002 Error initializing printer. Please make sure a printer is installed." but on Client-Server it's OK.
the objective is just want to direct print report to printer (do not show parameter form)
anyone know how to solve this problem ?
Hunsa
null

Hi,
i've changed to use RUN_REPORT_OBJECT as your advice and followed the instructions in "Oracle Reports Remote Printing Utility - An Oracle Technical White Paper December 2000". i tested orarrp by created the HTML file follow the steps in page 5 of the paper, it worked.
then i modified existed form, set report object property like this :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'test.rrpa');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'Rep60_NTSERVER2');
note : i'm not sure that i set the right value for REPORT_SERVER property, i got this value from TNSNAMES.ORA file.
then call the report with this statement :
:GLOBAL.ReportHandle := RUN_REPORT_OBJECT(report_id);
it showed the same error message :
"REP-3002 Error initializing printer. Please make sure a printer is installed."
i think i set something wrong, but i don't know where. could you help me ?
Hunsa

Getting   FRM-41029   when calling report from form

Hi
I have following procedure to run the report but its running fine but giving error FRM-41029 when calling the report from the form.
runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
Repid := FIND_REPORT_OBJECT(repobj);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE, RUNTIME);
set_report_object_property(repid, REPORT_SERVER, repserv);
set_report_object_property(repid, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(repid, REPORT_DESTYPE,'file');
set_report_object_property(repid, REPORT_DESFORMAT,repfor);
set_report_object_property(repid, REPORT_FILENAME,repfile);
rgds
soumya

hi
try something like this.
PROCEDURE sarah ( p_report_name varchar2, vParamValue number ) is
l_param_list paramlist;
l_rep_id      report_object;
l_rep_job     varchar2(100);
l_rep_status varchar(100);
BEGIN
l_param_list := Get_parameter_List('tmp');
IF NOT Id_Null(l_param_list ) THEN
Destroy_parameter_List( l_param_list );
END IF;
l_param_list := Create_parameter_List('tmp');
add_parameter(l_param_list ,'p_num',text_parameter,to_char( vParamValue ));
l_rep_id := FIND_REPORT_OBJECT( p_report_name );
if
     id_null ( l_rep_id )
then
msg ( 'There is no Report ' || p_report_name || ' in form ' || name_in ( 'system.current_form' ) );
raise form_trigger_failure;
end if;
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_OTHER, 'paramform=no');
l_rep_job := RUN_REPORT_OBJECT( l_rep_id, l_param_list );
l_rep_status := REPORT_OBJECT_STATUS( l_rep_job );
WHILE l_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
l_rep_status := report_object_status( l_rep_job );
END LOOP;
WEB.SHOW_DOCUMENT('http://sarah:8889/reports/rwservlet/getjobid'||substr(l_rep_job,instr(l_rep_job,'_',-1)+1) || '?server=repserver', '_blank');
END; then u may call the procedure something like this.
when-button-pressed trigger.
begin
sarah ('REPORT6', :block.item );
end;sarah
Edited by: S@R@h on Nov 30, 2009 9:39 PM

Calling report from form in Web environment

Hi,
We are in the process of migrating our C/S appication (developed in Developer2k) to intranet using OAS. My question :
a) Is there any other way to call report from a form other than web.show_document?
b) When a report is called from the report server(using web.show_document), a log-in screen comes up unless the login and password is passed as parameter. Only problem with this is the password shows in the URL. Is there any other way to make the call so that the login & password does not show and the user won't have to login a second time to run the report?
Any reply would be appreciated..Thanks

1. Yes you can use run_product package procedure to call reports on web, Oracle documentation says that run_product command will run in web env.
2. Yes you can hide username & password from user, it depends on which method you are using to call reports, if you are using web cgi then add username & password in file "cgicmd.dat" and "oascmd.dat" for web catridge or in cartridge parameter setting you will find this files in directory "\orant\report60\server\".
Darshan Desai
[email protected]
null

No Parameter form when calling report from Forms 6i webpage

I have my Forms 6i fmx files and Reports rep files runnung off of HP Unix
within the same directory and yet when I call the report with RUN_PRODUCT,
I don't get the Parameter Form popup. I left it as default at first, and then I even tried using ADD_PARAMETER(pl_id,'PARAMFORM',TEXT_PARAMETER,'HTML') to my parameter pl_id in my RUN_PRODUCT call. Can anyone tell me why I don't get a Parameter form?

Actually if you are on the Web then you don't have much control over the format the parameter form is in, so specifying it as HTML doesn't help.
Try paramform=yes when calling teh Report and this "temporarily" should help. The problem that you run into the is that there is nothing happening when you click the parameter form submit button. The reason is that when using Run_Product you are talking to a static HTML file generated into teh Reports temp directory with no services assigned to it.
Check the Whitepaper under http://otn.oracle.com/products/reports/pdf/277282.pdf for the options that you have.
Frank

When calling report from forms, only html format report can show chinese characters

To all experts,
When I run report by calling run_report_object() in forms, only html format can show chinese characters. If I choose pdf format, garbage characters were shown instead of chinese characters. My settings on server are as follows:
NLS_LANG=TRADITIONAL CHINESE_HONG KONG.UTF8
FORMS60_REPFORMAT=PDF
Do you know why? I hope to print report in PDF format as PDF turned out to be more regular in format. Is there any additional settings required?
May experts here broaden my mind?
Richard

You have two different ways of generating Japanese PDF files from Reoprts. One is font aliasing and the other is font subsetting.
<font aliasing>
You will need to have the following entries in uiprint.txt (example).
[ PDF ]
.....JA16SJIS = "KozMinPro-Regular-Acro"
"MS UI Gothic".....JA16SJIS = "KozMinPro-Regular-Acro"
You may need to download and install Japanese Font Pack from Adobe's web site (if your Acrobat is non-Japanese version).
<font subsetting>
You will need to add C:\WINNT\Fonts (or wherever your TTF/TTC fonts are installed) to your REPORTS_PATH.
You will also need to have the following entries in uiprint.txt (example).
[ PDF:Subset ]
"Andale Duospace WT J" = "Aduoj.ttf"
"Albany WT J"="AlbanWTJ.ttf"
"MS UI Gothic" = "msgothic.ttc"

How to hide URL when calling Reports from Forms 10g.

Hi ,
When end user runs a report through a form then report output is displayed and following type of URL is also generated on address bar of browser: http://server:7778/reports/rwservlet/getjobid22243?server=rep_servername_appsrv
Can we hide this URL so that the user cant change the JOB_ID and get access to other previous reports.
Thanks & Regards,
NL

Actually, there are several options including the one already offered above. Here are a few more:
1. If you are using 10.1.2.3 and a newer JRE on the client (e.g. 1.6.0_10 or newer), you could use java script to open the report. This will not be a perfect solution because it may not work if using a non-IE browser or if java scripting is disabled. Refer to MyOracleSupport Article 265863.1 for more information.
EXAMPLE:
WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,"));self.close()','_blank');Replace the url in the above example with the call to your report.
2. Set the age of the cache to a very short value so that it is only available long enough to be viewed by the user who created it. In other words, when setting the reports properties in your Forms code, include the Reports "others" parameter with TOLERANCE=1
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'TOLERANCE=1');This will cause the cache (on the server) to live for only one minute then be deleted. Refer to the Report Deployment Guide for more information.
3. Upgrade to Fusion Middleware (Forms/Reports) 11. In version 11, the Reports jobid can be randomized. See section 18.8.2 of the Reports 11 Deployment Guide
http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/toc.htm

Supressing the parameter form when calling report from form...

Hi everybody
I call a report from a form passing a parameter. After pressing
the button, the runtime parameter from appears. How do I
suppress it so that the report appears right after pressing the
button???
Thanks
Serguei

Hi Serguei ,
You have to add a text parameter 'PARAMFORM' with the value
'NO' to the passing parameter list.

Default file location when calling report from Forms 10G

I've tried this in the reports forum, but it applies equally to forms I guess..
Hi,
I've managed to put together a routine for running a report from a 10G Form. In 6i I specified a "relative path" to my report name as follows:-
"Run_Product(REPORTS, '..\Reports\myreportname', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL); "
In 10G I would like to just specify the report name, rather than the full file path. Can I specify a relative file path - or alternatively can I set the default report location in a configuration file?
At the moment I'm having to specify something like:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'c:\oracle\systemname\reports\myreportname.RDF');
I would like to just have:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'myreportname.RDF');
Many thanks,
Keith.

Do you run your application on an application server?
If so you should use the REPORTS_PATH environment variable (in windows registry entry).
Alternatively you could use an environmentid in the reports.conf-file:
<server version="10.1.2.0.2">
<environment id="YOURID">
<envVariable name="REPORTS_PATH" value="C:\......"/>
</environment>
You call the report with the parameter &envid=YOURID in the URL.

Calling Reports from Form on Web... Kindly help

Gurus!
I am using 9iAS(1.0.2.2.1) with 8.1.7 database on the same
machine with Win NT4.When i invoke report from the main from's
link using parameter list as
Run_Product
(reports,'..\iReports\glrxx13.rep',synchronous,RUNTIME,FILESYSTEM
,pl_id,null);
My Reports are in folder "iReports" which i put in the 9iAS's
report60 folder & also in the report60 folder but when called the
error raised:
"Error:0110 Unable to open the report '..\iReports\glrxx13.rep"
"Error:...Error while opening or saving a
ducument '..\iReports\glrxx13.rep".
I dont know more about virtual dirves & environment variables
setting i.e what & where these should be put.
Kindly help!
Many Many thanks!

hi,
check out this link,
http://www.oracle.com/technology/products/forms/pdf/10g/frmwebshowdoc_rep.pdf
best luck,
Regard's,
Percy

Calling report from form on web

We are encountering a problem while trying to invoke a oracle report from a form .
The versions being used are : forms 6i (6.0.8.13.0 ) , report6i( 6.0.8.13.1) running on oracle 9iAS.
It is working fine in client server environment where we are able to invoke the report from the form .
Now we are trying to run it on web , and the same form is unable to invoke the report.
We are not getting any response in the browser ... even after a long period . Further, no error messages are returned and
the cursor remains in the "Busy" state , all throughout ( hour-glass icon). We verified that report name and path are correct.
Thanks in advance...
its very urgent
rgds..

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

REP 110 & REP 0110 .calling reports from Form 10g(10.1.2.0.2)

Hi All,
We are migrating form from Oracle form 6i to Oracle 10g(10.1.2.0.2). I am calling reports from forms
using Web.Show_Docment(). When we run reports in report builder 10g it works fine.
But when we try to run reports from Forms 10g it throws error which is given below.
We want to run reports from UNIX. After using this url to submit report we get error REP 110 and REP 0110
URL
http://GEM:7777/reports/rwservlet?server=rep_server&report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
ERROR
REP-110: File '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2' not found.
REP-0110: Unable to open file '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2'.
I will really appreciate your help.
Thanks
Sandy

Hello,
You are mixing 2 separators in the URL : & and +
Use only one separator in the URL :
Example :
http://GEM:7777/reports/rwservlet?server=rep_server+report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
Regards

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Getting rep-3002 when calling report from form on web

Similar Messages

Maybe you are looking for