Getting RFC error After system Refresh

HI Gurus,
Recently our SRM QA client was refreshed from Prod and all the RFC connections are pointing to R/3 Production client instead of R/3 QA Client. Because of this reason we are unable to replicate the Product ID's from R/3 to SRM. Also all the attribute values are showing the source sustem as Producion instead of QA R/3.
We have verified the following and everything looks good.
1. Table CRMMLSGUID - R/3 logical system as QA R/3.
2.We ran the report RHOMATTRIBUTES_REPLACE for the attribute SYS but.no update.
3.SPRO u2192 Supplier Relationship Management u2192 SRM Server u2192 Technical Basic Settings u2192 ALE Settings (Logical System) u2192 Distribution (ALE) u2192 Basic Settings u2192 Logical Systems u2192 Define Logical System.
4.SPRO -->Supplier Relationship Management -->SRM Server ->Technical Basic Settings ->Technical Basic Settings.
5. SPRO ->Supplier Relationship Management -->SRM Server ->Technical Basic Settings ->Define Backend System for Product Category.
Your response is highly appreciated.
Thanks,
Sada.

Hi,
After refresh to QA, there may be refresh fpr RFC users.
Please check
a)RFC Users with Pwd are exists , if not create new.
b) Maintain those users /pwd/client in SM59.
Hope this will work for it.
Rahul Mandale

Similar Messages

Portal Runtime Error after System Refresh

Did a system refresh and now when I select a BI workbook that executed before the refresh I receive the error
"portal runtime error
an exception occurred while processing your request
exception id:09:27_07/02/11_0018_2780350
see the details for the exceptio id in the log file".
Queries run without erroring only the workbooks give this error... apprecitate any help - thanks

Hi Annette,
Did you clear all the cache, closed the browser and try again?
If the error still appears, check the error log.
Where are you checking the BI workbook? Is it through portal is it through an iview? If yes then check if the
application runs when the iview is previewed directly.

DTP transport error after system refresh

Hi Experts,
    The scenario is that Dsystem has already refreshed data from Psystem,and then error occured when transport DTP from D to Q system.
    As per the threads before, i know that we can trace DTP technical name in table RSBKDTP.
    That i show the detail as the field from RSBKDTP in the below,
Before refresh,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP0                            DTP0
After refresh P to D,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP2                         DTP0
Then the transport error from D to Q caused by that the two name underlined is not corresponding.
Could anybody give me advice to solve the problem, if not ,i could only creat a new DTP in D.
I am currently trying to find an solution and I will share if I find. Thanks.
Edited by: rurupolo on Jul 15, 2010 5:20 PM

Hi Friend,
Just activate the DTP2 in D again and transport to Q. It should work.
Regards
Hemant Khemani

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Sc not transfered to backend rfc error after bapi_po_create1 ?

I have one user who's shoppingcarts are not transferred to the backend. when I try to transfer it manually with BBP_PD_SC_TRANSFER I get an rfc error after the bapi_po_create1
for the rest the whole system is functioning as it should but only for this user the shoppingcarts are not transfered. I also don't get any errors back from the bapi.
anybody got a clue what can be wrong with this particular user ?
I checked everything in ppoma but can't find any flaws or errors.
kind regards
arthur

>
Virender Singh wrote:
> Hi
> Did you check the Error Log in RZ20. There has to be something wrong in this shopping cart data. Is the SC Approved? What is the error shown by BAPI_PO_CREATE1?
>
> Regards
> Virender Singh
I am a bit closer to the answer I guess. no there were no erros given with BAPI_PO_CREATE1
fuzzy part however with the sc was that there was only an acc_no of 002. since the last hrsps on the backend the BAPI_PO_CREATE1 gave errors back that it didn't accept 002 without a 001
so I checked in a badi if there were acc_no with 02 and 100% costassignment and transfered these back to 01
with the badi BBP_CREATE_BE_PO_NEW. that was working very nice until one user could not transfer any shoppingcart anymore. I saw that she had a workprocedure that caused the 02 acc_no (she used copy paste) when I let her do it without copy paste and just change it then the shoppingcart created a PO.
but I'm puzzled what I'm missing here and why it most of the times work but sometimes it just doesn't give any errors back and no purchasenr but just an exception others.
can I debug this further on in the backend somehow what causes the exception ?
kind regards
arthur

I'm getting this error after I edit photos 'nothing was imported. What is causing this?

I'm getting this error after I edit photos 'nothing was imported. the files or folder selected to import did not contain any supported file types, or files are already in this catalog.I have elements 13 using hp windows 8 laptop and never had this happen before.

Hello staceonbass,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Portal Error after system copy

We are getting below error after we performed a dual stack system copy. We are able to connect to VA, Configtool, SDM except portal. Any ideas?!
http://host:port
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error in starting application [sap.com/com.sap.engine.docs.examples].
std_server0.out has erros like below:
com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_33] Fatal:
com.sap.portal.prt.sapj2ee.error [SAPEngine_System_Thread[impl:5]_150] Fatal: Exception while starting: sap.com/com.sa
p.netweaver.bc.rf
com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_7] Fatal:
com.sap.portal.prt.sapj2ee.error [SAPEngine_System_Thread[impl:5]_150] Fatal: Exception while starting: sap.com/com.sa
p.portal.pcm.admin.apiservice
dev_server0:
Wed Sep 17 21:52:37 2008
186.817: [GC 186.817: [ParNew: 119589K->32359K(130560K), 0.0669152 secs] 169148K->81918K(1005056K), 0.0670788 secs]
[Thr 223] Wed Sep 17 21:52:38 2008
[Thr 223] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
Wed Sep 17 21:54:58 2008
327.480: [GC 327.481: [ParNew: 119399K->35834K(130560K), 0.0745068 secs] 168958K->85393K(1005056K), 0.0746528 secs]
Wed Sep 17 21:54:59 2008
328.550: [GC 328.551: [ParNew: 121894K->43519K(130560K), 0.0827871 secs] 171454K->93460K(1005056K), 0.0829520 secs]
Wed Sep 17 22:01:04 2008
693.368: [GC 693.368: [ParNew: 130559K->43520K(130560K), 0.1257561 secs] 180500K->103573K(1005056K), 0.1259380 secs]

Hello. Try to connect VA, after navigate --> Deploy --> Application , try to find applications
(for example sap.com/com.sap.netweaver.bc.rf or other, and try to start) if it not starts, check the errors directly here. Regards.

Im getting this error after trying to laounch SQL*Plus

Hallo, guys!
Help me on this one. I'm new to Oracle on Windows 2000 Professional
Im getting this error after trying to laounch SQL*Plus
Error 6 Initializing SQL*Plus
Message file spl<lang>.msb not found
SP2-0750:You may need to set ORACLE_HOME to your Oracle Software directory
Urgent please respond
Thanks
sridhar

Verify the contents of the following subkey in your Windows2000 registry:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_YOUR_HOME_NAME
Your Windows 2000 registry must contain several minimum parameters, defined as registry entries inside the above subkey (See http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14304/registry.htm#i1006544). One of them is ORACLE_HOME, which could have been accidentally removed or changed. ORACLE_HOME must contain the home OS path to the SQL*Plus executable in your machine (For example, C:\Oracle\OraDB10g). I tried changing the name of the ORACLE_HOME registry entry in my machine and received the same exact messages you did when launching SQL*Plus.
In your OS, verify also Control Panel > System Properties > Advanced > Environment Variables > System Variables > Path, and make sure the above ORACLE_HOME's path is included in the Path variable (preferably in the starting position)
Regards,
Luis Morales
ConsiteNicaragua.com

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

TDMS RFC Error in system analysis phase

HI,
We are facing RFC Error in system analsysis phase. While starting Analyze and specify 'From Date'

Hi,
Check if the RFC connections are working fine from central system to all the other systems.
Apart from transaction SM59, You can also check the RFC destinations using activity "Define RFC Settings" (the first activity in the process tree of your package). The RFCs should be correctly defined and synchronized, all the lights should be green.
Additionally, check that the users are assigned the role SAP_TDMS_USER.
Regards,
Rupam

When I create a new email and start typing, I get an error after two characters

This has been bothering me for months.
When I create a new email and start typing, I get an error after two characters (see below). I thought maybe it was a particular person's contact, or it was because I typed too fast, but it is not. Doesn't matter what email address I use, or how long I wait, the first address errors and I have to erase it and start over. Sometimes I have to try several times.
Very annoying. I am using the latest build of Safari on a Mac.
Any help would be greatly appreciated.
Bryan
<Image Edited for Personal Information>

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Getting RFC error After system Refresh

Similar Messages

Maybe you are looking for