Getting rid of audio buzz

I know everyone at one time or another has had a little buzz from a soundboard that they have recorded from is there any easy filter without it sounding like your under water to use to get rid
of this, I have tried Soundtrack pro but it there any filter that would work better than another?

no
mains hum is in the frequency range of the material you would want to keep so using a filter will degrade the sound more than it will enhance it

Similar Messages

Getting rid of audio hums

Well - I have a Cannon GL2, and an external mic that I used to shoot. After I captured my footage, I noticed during some of my takes there's a low sounding hum underneath the entire take. Is there a trick to get rid of that? If not...uh oh!

I had the same problem with a huge amount of hum in a recording I made. I spent most of a day working with the built-in audio filters, including the hum filter. Nothing removed it. I read other posts where they recommended SoundSoap2 from Bias. I went to their site and watched this video http://www.bias-inc.com/downloads/videos/soundsoap2/movie.php a couple of times then ordered it through Amazon.com (which saved me about $40).
I got SoundSoap2 in the mail today and in about 10 minutes I had it installed and the hum removed from the video. It's easy to use (just watch the video and you are trained) and worked like a charm for me. I highly recommend this product.

I deleted an audiobook from Itunes on my computer and emptied my trash, plugged in Iphone 5s to sync Itunes. Audio book still appears on my Iphone. How do I get rid of audio book on Iphone?

I deleted an audiobook from Itunes on my computer, emptied my trash, they attached Iphone 5s to computer to sync computer to Iphone thinking that by deleting the audiobook from Itunes, the audiobook would then be deleted from my Iphone. It's still on my Iphone. How do I get rid of the audiobook on my phone?

JustinV72 wrote:
How do I get the audiobook onto my iphone without erasing anything?
You transfer the purchases to the computer you use to sync the iPhone. You can use a thumb drive or an external HD, etc. Read this: iTunes for Mac - How to copy purchases between computers: http://support.apple.com/kb/HT1373

How do I get rid of audio pops and clicks between clips in Final Cut Pro X?

Is there a layman, non-professional way to do this? These are just video files... i don't know anything about formats of different files and all that, but i read in other posts that the files should be "uncompressed 48k something something", but i dont even know how to convert the audio(From video) that's already on my timeline to this format

Your clicks probably are related to the fact that you are using the whole clip, leaving no "handles". Handles are extra portions of a clip, before and after the portion you use in your timeline.
The clicks are probably caused by the camera. You are using whole clips (that is why you get the warning when trying Cmd-T, "there is no extra media..."), so you are starting and ending right where the camera did.
If possible, trim a little bit at the end and start of each clip. Select just the edge of the clip (not the whole clip) and drag a little bit to shorten it. Just a few frames might be enough.
For the future, you should remember to let the camera capture a little more than you will actually use - so that you can have those "handles". See the picture.

Can't get rid of audio when deleting a video clip

I am very new to keynote.
I put in a video clip (mp4 or mov) and that's fine. I decide I want to change it so I delete it from the slide and insert another one. Tha's fine but the audio from the first clip is still there and plays away along with the new. If I do not add another clip but just press play the audio plays away on its own.
Obviously I have no visual indication of where this clip is and in my ignorance do not know where to find it to delete it. If i delete the whole slide of course it disappears but that is not the long term answer I am looking for.
Pete Snowdon

@dkg62 – to make clear what's going on, select the text frame and show us another screenshot.
There are at least four cases where you can get a text like that. All cases imply, that the font you'd like to use is missing. I simulated this by formatting text with a font weight that is not available by a character style.
1. The most likely case: There is baseline shift applied; here in my case 9pt.
All other cases are academical, because the pink highlighting is aligned with the text:
2. Text frame options, baseline set to a fixed value (zero in this case)
3. Text on path and the text frame options (baseline) is just the standard default. You can see a second #-end of story sign inside the text frame.
4. Text on path and the text frame options (baseline) is set to fixed (zero in this case). The second #-sign inside the text frame is shifted above because of the fixed value of the baseline option of the text frame options. And obscured by the pink highlighting.
Uwe

How do i get rid of audio advertisements?

There are constant audio advertisements and it is really irritating.

We do need a bit more information than that.
If you hear them no matter what website you're on, check if you have been infected with adware.

Help getting rid of Audio during video import

Hi Everyone,
I wonder if someone could advise about a problem? We have a
number of video clips from a client in WMV format and wish to
import into Flash 8. We did this without any problems and created
the flv files using the video import wizard. The client however
wanted us not to include the audio as is was really just background
factory noise. During the video import steps - Encoding, I selected
'Show Advanced Settings' and unticked 'Encode Audio'
Now however the video doesn't import at all and an empty
SWF/flv file is produced. Am I doing something incorrectly or is
there a better way to 'remove' the audio?
Any advice greatly appreciated
Many thanks
Dave

If it's not very bad you should be able to fix it using the Power Line Hum <Analysis Type in the Analysis Tab
Check [Analyzing and Fixing Problems in an Audio File|http://documentation.apple.com/en/soundtrackpro/usermanual/index.html#chap ter=8%26section=16]
[Analysis tab|http://documentation.apple.com/en/soundtrackpro/usermanual/index.html#chapt er=2%26section=22%26tasks=true]
A

A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV. How can I get rid of this?

A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV. How can I get rid of this?

Had this happen to me after a recent update, was super annoying. To turn off, go to Settings > AirPlay > Conference Room Display > Off.

Get rid of the warnings prior to stretching audio in Arrange

Does anyone know how to get rid of the warnings prior to stretching audio in Arrange?
In the demonstration here on Apples own website, workflow is sped up by the fact that you don't have to hit ok twice before the edit is executed. I have tried to disable warnings etc, but it still does it.
http://www.apple.com/logicstudio/logicpro/
Incidently, I clearing popup warnings using the V-Pots on the Mackie Control doesn't work anymore either. Can anyone confirm this?
This appears to be yet another newly introduced controller bug... Don't even get me started on trying to use a Frontier Tranzport with version 8.

No, the inly option is to uncheck 'Warning before processing function by key command', which doesn't change the situation.
Have you actually done this?

How to get rid of window Bluetooth audio failed?

Somehow fooling around with wirless Dragon Dicate or whatever i got a window
"Buetooth audio failed
There was an error connecting to your headset. Make sure it is turned on and in range.
The audio portion of the prgram you were using may need to be restarted"
I cannot get rid of tghe indow althiugh I can drag it almost out of site.Restarting does not clear it.
Where do I find the file that I cn delete this message and get on with my life.
Oh and in pasing "insert the image" or attemt to copy (I get the spinning ball) did not work,
I am using an Apple Blue tooth keyboard and an Apple bluetooth mouse
Second quiestuio how do I get the apple keyboard to wotk with a first generation iPad?

Your index rebuild attempt obviously hit a bug. There is a similar bug for older versions of Oracle when attempting to (re-)build an unique index online and the recursive sql generated for checking the uniqueness is malformed.
Which version of Oracle is this database?
Manually manipulating the remaining objects is dangerous and can lead to ORA-600 errors when accessing the base object. If you run into this ORA-600 errors you need to bounce the database instance, that should fix the issue.
The remaining objects are supposed to be cleaned up by the SMON background process but it can take him a long time in busy systems(up to two days says Oracle). As long as there are ongoing transactions on the object the clean up procedure might not be able to complete and will attempt to re-try depending on Oracle version.
In more recent releases of Oracle (at least 10.2.0.1 and later) there should be a DBMS_REPAIR package that offers a function ONLINE_INDEX_CLEAN that manually invokes the cleanup procedure that SMON should be doing anyway, but it still may not be able to do the clean up due to concurrent DML activities.
If DBMS_REPAIR is not available in your database you can check for the installation script in the following location, but in older releases it does not contain the ONLINE_INDEX_CLEAN function. I'm not sure if this is available as backport to previous releases resp. as one-off patch:
{ORACLE_HOME}/rdbms/admin/dbmsrpr.sql
Regards,
Randolf
Oracle related stuff:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

How do I get rid of the dialog box and audio that is in the bottom left of the screen that keeps telling me what I'm doing or need to do?

How do I get rid of the dialog box and audio that is in the bottom left corner of the screen running script and audio of what I'm doing or need to do?

Go into System Preferences, select Universal Access, turn off Voiceover.

When opening Firefox there is an audio set of advertisements; I can't find where to stop the ad; I've downloaded. How do I get rid of this?

Opening Firefox immediately turns on an audio that contains a series of ads. I have removed the version on my computer and downloaded Firefox 5. It still happens. How did I get rid of the vocal advertisement? It does not happen when I use Safari.

Is that coming from your homepage? Have you tried resetting your homepage to see if those ads don't play? Or tried using about:blank as your homepage?
http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

Can't get rid of original Audio

I'm overwriting a clip on the timeline with a clip from the events, but I can't get rid of the audio from the timeline clip. What's up? Even when I cut the clip I want to replace, its audio remains.

I did not separate it.
What do you mean by "edit style"? Can't seem to find a way to adjust that.
It seems that whatever I do, the original audio stays. I tried to overwrite, and I tried to completely cut out the original audio... I'm trying to cut in a close-up over a medium shot and want to use the dialogue from the close-up.
Thanks.

I have 30 gb of audio 14 gb video and 33gb of other what is other and how do i get rid if it.

i have 30GB of audio 14GB video and 33GB of other.... how do i get rid of the other?

The Other category of your iPod consists of such things as album artwork, the iPod's software, games, files you are storing external on the device, etc. However, it's size you usually only a small fraction compared to the rest of your iPod's storage allocation (unless you are storing up large chunks of data on the iPod externally).
A large amount of other is usually a good indication of corrupt files on your iPod leftover from sailed sync operations with iTunes. The only way to reduce it to a smaller number and address this issue, is to restore the iPod to factory settings in iTunes.
B-rock

Getting rid of unwanted background audio

Hey guys, so recently I recorded some interviews in not the ideal location. As such the audio I have has background noise ranging from a waterfall making noise to small chatter of other people. I have tried to clean up the audio and get rid of the aditional unwanted noise but so far no luck. Either I can't get rid of the noises or it ends up making the person getting interviewed sound bad. The waterfall part is what is really making my audio unusable. Does anyone have any suggestions or advice?

I agree that Audition is probably the best tool for Audio "noise removal," but this article has a few other options: http://forums.adobe.com/message/2860521#2860521
"Noise" can be tough, as it can be broad spectrum, and have many of the same frequencies as the human voice. With that situation, it becomes nearly impossible to "fix," but one might be able to attenuate that noise some.
I would also experiment with Jerry K's suggestion - noise reduction/removal is often a series of experiments with critical listening.
Good luck,
Hunt

Getting rid of audio buzz

Similar Messages

Maybe you are looking for