Getting rid of black borders from video

is there a bleed line with this software because I do "scale to frame size"

There's no such thing as bleed in video. Your source video is at a different aspect ratio than your sequence; what are the dimensions of your footage and of your sequence?
Scale to Frame Size works by scaling the video in a sequence frame until it is able to show the entire video image; if it hits a boundary (sides or top and bottom) before completely filling the frame, it will stop scaling. It won't ever stretch, squeeze, or otherwise distort the video image. In cases like that--if your source footage and sequence are different aspect ratios--you're better off using the intrinisic (that is, built-in to every clip) Motion > Scale effect. Select the clip, bring the Effects Controls panel forward, and swivel open the Motion effect; drag the Scale parameter up or down until you fill the frame and eliminate the black bars.
Check out this video for more: How do I get rid of black bars around my movie? - Premiere Pro: Frequently Asked Questions

Similar Messages

  • Settings dimensions - can't get rid of black borders

    Hi
    I'm using Final Cut Express 4.0.1. I have a 30sec quicktime movie that I need to import and then add some music too and then export with the same dimensions. The current dimensions are 1024x567. However even when I set dimensions to the custom setting of 1024x567 when exporting I end up with black borders at the top and the bottom of the movie. I think part of the problem is that I need to change settings in FCE before I export as when Im looking at the movie in the 'canvas' box it has those same black borders. However I cant seem find any where to change the main project settings...
    Any help would be much appreciated.
    Thanks

    Hi
    I tried to follow your instructions and this is what it looked like in FCE.
    [IMG]http://i115.photobucket.com/albums/n284/Jampig/Screenshot2010-06-03at131510.png[/IMG]
    When I export it either as anamorphic or something else the black borders are still there.
    The properties of the original clip are
    Dimensions: 1024x576
    codecs: AAC, H.264
    Color profile: HD (1-1-1)
    Is that what you were after?
    Thanks!

  • How can I get rid of shimmer effect in videos that I create in iMovie?

    How can I get rid of shimmer effect in videos that I create from photos in iMovie?

    Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
    But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
    As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
    Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

  • C4700 installed ;Get rid of black box on screen??

    Installed printer, it works fine. Can't get rid of black box panel on left side of computer screen;says clip book on top. So can't see left half of websites or email.  Also dragging box over to print doesn't go out of panel.

    hi,
     I believe this is the HP Smart Web Print software that was installed after installing the full feature driver of the printer. You can uninstall it from Add/Remove Programs of the Control Panel if you are using Windows XP, or it is in Uninstall A Program of Programs and FEatures of Windows Vista or Windows 7.
    Kiko

  • How to get rid of the other from the MacBook Air Memory?

    How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

    About “Other”:
    http://support.apple.com/en-us/HT202867
    Go step by step and test.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Backup your computer.
    3. Empty Trash.
       http://support.apple.com/kb/PH13806
    4. Disk space / Time Machine ?/ Local Snapshots
      Local backups
       http://support.apple.com/kb/ht4878
    5. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    6. Re-index Macintosh HD.
        This will take a while. Wait until it is finished.
        System Preferences > Spotlight > Privacy
        http://support.apple.com/kb/ht2409
    7.Try OmniDiskSweeper. This will give the storage size details of the items.
       https://www.omnigroup.com/more
       Select Macintosh HD and click  “Sweep Selected Drive” at the bottom.
       Be careful. Delete only the files that can be safely  deleted. If you are not sure about any file, don’t touch it.
    8. Move iTunes, iPhoto and iMovie media folders to an external drive.
        iTunes
        http://support.apple.com/en-us/HT201562
        iPhoto
        http://support.apple.com/kb/PH2506
        iMovie
        http://support.apple.com/kb/ph2289

  • How do I get rid of deleted emails from my work email account on my Air?

    How do I get rid of deleted emails from my work email account set up on my Air. Keep getting error message "An error occurred while moving messages to mailbox "Trash - On My Mac" They go away from deleted account folder when I hit "trash button" but then they come back later.

    Back up all data. Rebuild the mailbox. Try to delete the messages again.

  • I have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing

    i have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing a song while he is checking his phone. how do i get rid of it????

    If it happens again the make sure that you aren't suppressing website colors.
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *https://support.mozilla.org/kb/Options+window+-+Content+panel
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server

    In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
    For example, the TEST servlet under OC4J would be passed through OHS using:
    http://urmachine:urApachePort/j2ee/TEST
    whereas in the standlone OC4J version, this URL works:
    http://urmachine:urOC4JPort/TEST
    How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?

    It is getting the url prefix from mod_oc4j.conf
    under /ora9ias/Apache/Apache/conf
    You can read more on this at
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
    -Prasad

  • HT1766 An Apple consultant said I could get rid of itune playlist from my ipad by connecting the cable from my ipad to a computer that does not have songs from itunes in its computer. I was not able to do it. Any suggestions?

    How do you get rid of itunes playlist from my ipad? I was told you can sync it back to a computer that does not have any itunes songs. It did not work.

    I'm sure I don't completely understand the question.
    How to get rid of an iTunes playlist from your iPad? Just delete the items while using iTunes. The next time you sync, they'll be gone from your playlist.

  • Can't get rid of photo album from computer

    My phone has a photo stream album from computer that I cannot get rid of.  I have removed the folder containing the photos from my computer.  Removed all backups in itunes.  The box in the itunes sync for photos has never been checked.  I have syncd several times and cannot get rid of the album from the iphone.  Any suggestions would be appreciated.

    Create and sync an empty folder to your phone as I expained in your other post hereI have an album on my iPhone 4 called "Photo Stream, From My Computer." And i have no way of deleting any picture in that album or deleting the album. I have searched around forever and found nothing that worked. Please help! (I run iOS 7) .  That will remove any orphaned albums previously synced to your phone.

  • New Imac. I get rid off login password from security and account and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

    New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

    First, reset your password as follows.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
    If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • How to remove black borders from picture?

    http://www.homeofthenutty.com/twilight/screencaps/albums/TwilightPart2/Twilight1833.jpg
    Is there a Photoshop tool that can easily remove the black borders from pictures like this? Anyway to extract the image from the black background?

    You may be able to use the Image - Trim feature, though it requires exact pixel color matches, which may not be true with lossy compression (e.g., JPEGs).
    Another way is to use the Magic Wand Selection Tool with some tolerance (e.g., 24), select the borders, invert the selection, then use Image - Crop.  It will cut off all fully selected rectangles of pixels.
    Watch your copyright issues if modifying copyrighted works
    -Noel

  • Get rid of SQL ID from database

    1. The SQL query is running nore than 30 mints with SQL ID aaaaabbb7RRRR . we killed the seesion and clear cache
    again we ran the query, the query is assigned to same sql ID aaaaabbb7RRRR we killed the seesion and clear cache
    ran query one more time it is assigned to same ID again
    anyone know how to get rid of SQL id from Database
    Edited by: user8680248 on 19/04/2010 22:32

    user8680248 wrote:
    I have shutdown the database and restarted , I can see the query assigened to teh same SQL IDYou seem to think SQL_ID is uniquely generated for each SQL Statement.
    I'd come to he conclusion that it is derived from the hash value of the SQL statement. Which to me means that the same SQL statement would result in the same SQL_ID. Some internet hits that support my way of thinking are
    http://www.experts-exchange.com/Database/Oracle/10.x/Q_23843388.html
    http://blog.tanelpoder.com/2009/02/22/sql_id-is-just-a-fancy-representation-of-hash-value/
    http://www.slaviks-blog.com/2010/03/30/oracle-sql_id-and-hash-value/
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:10353453905351
    from which I note that Tanel shows a way of converting the Hash value (derived directly from the statement) to the SQL_ID, and Tom says "sql_id survives database instance restarts and reloads."

  • Help Please! How can i get rid of shopper pro from my google chrome browser?

    Help Please! How can i get rid of shopper pro from my google chrome browser?

    Read this document about malware and adware.   The solution is almost certainly within.The Safe Mac
    http://www.adwaremedic.com/index.php
    Incidentally, it would help if you entered details of your products in your profile.   There are different answers for different items with this question.

  • How to get rid of compound information from nodes

    Hi expert,
           I have a hierarchy used for cost center in the report, when displaying cost center, its compound 'controlling area' is also displaying. such as for a node, its key value is 'CM01FIAC_FR_EA', in wich 'CM01' is for controlling area. I am trying to remove controlling area from display of cost center.
           for cost center, I have removed its compound from displaying by adding controlling area into row and setting it as 'no display', but for nodes of cost center hierarchy, compounds are still ther. please tell me how to get rid of compound information from nodes?
    Many Thanks,

    Hi Phani,
          cost center is displayed in hierarchy, I have remove compound from leaf of hierarchy, but compound is still there in nodes. also eventhough I set suppress result for controlling area, its result is still in the report. so you reference does not resolve my problem.
    Many Thanks,

Maybe you are looking for